- All
- Favorite
- Popular
- Most rated
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MVR Evaporator Technology |
| Pricing | Upon Request |
| Sample Processing | Industrial Wastewater Treatment |
| Brand | New Biolink |
|---|---|
| Model | UHP-RO Series |
| Max Operating Pressure | 20 MPa |
| Membrane Type | High-Pressure Tolerant RO Element with Open-Channel Feed Spacer |
| Feed Compatibility | High-Salinity Wastewater (TDS up to 120,000 mg/L) |
| Recovery Rate | ≥75% (system-dependent) |
| Origin | Beijing, China |
| Application | Laboratory-Scale Wastewater Concentration and Brine Minimization |
| Brand | Xinbaili (New Biolink) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CM-Series Ceramic Membrane System |
| Application | Wastewater Treatment |
| Filtration Modes | Cross-flow Microfiltration (MF) and Ultrafiltration (UF) |
| Pore Size Range | 50 nm – 1.4 µm (MF) |
| Molecular Weight Cut-off (MWCO) | 8–50 kDa (UF) |
| Operating Temperature | Up to 120 °C |
| pH Tolerance | 0–14 |
| Max. Operating Pressure | ≤10 bar |
| Chemical Resistance | Compatible with strong acids, alkalis, oxidants (e.g., NaOCl, H₂O₂), and organic solvents |
| Cleaning Regime | CIP-compatible with alkaline, acidic, and enzymatic solutions |
| Typical Flux Recovery Rate | >95% after standard CIP |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | APNE-12 |
| Instrument Type | Automated Quantitative Nitrogen Concentrator |
| Temperature Range | Ambient to 70 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Maximum Sample Volume per Vial | ≤200 mL |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DTRO |
| Application | Industrial Wastewater Treatment & High-Salinity Liquid Purification |
| Membrane Configuration | Disc Tube Reverse Osmosis (DT-RO) |
| Feed Water SDI Tolerance | Up to 6.5 |
| Typical Recovery Rate | 75–90% |
| Effluent Conductivity | As low as 100 µS/cm |
| Design Service Life | 5–10 years |
| COD<sub>Cr</sub> Tolerance | 1,000–20,000 mg/L |
| Total Dissolved Solids (TDS) Tolerance | 1,000–20,000 mg/L |
| Operating Cost | < USD 0.30 per cubic meter (based on typical energy & consumables) |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Filtration System |
| Sample Processing | Waste Water Treatment |
| Filter Types Supported | Activated Carbon Filter, Catalyst Filter, Bag Filter, High-Voltage Insulating Oil Filter, Depth Filter, Sterile Filter, Corrosion-Resistant Filter |
| Brand | New Biolink |
|---|---|
| Model | XBL-UF Series |
| Origin | Beijing, China |
| Membrane Configuration Options | Hollow Fiber, Spiral-Wound, Tubular, Flat Sheet |
| Operating Pressure Range | 0.03–1.2 MPa |
| Molecular Weight Cut-Off (MWCO) | 1,000–500,000 Da |
| Primary Application | Wastewater Treatment, Process Stream Clarification, Biomolecule Separation |
| Compliance | Designed for GLP-compliant labs |
| Brand | Xinbaili (New Biolink) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | High-Salinity and Refractory Wastewater Treatment System |
| Pricing | Available Upon Request |
| Sample Processing Capability | Industrial and Laboratory-Scale Wastewater Treatment |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Model | Hollow Fiber Membrane |
| Membrane Material | Polyvinylidene Fluoride (PVDF) |
| Manufacturing Process | Thermally Induced Phase Separation (TIPS) |
| Configuration Options | Pressure-Driven, Submerged, and MBR Curtain-Type Modules |
| Chemical Resistance | pH 2–12, Oxidant-Tolerant (up to 50 ppm NaOCl) |
| Mechanical Strength | >1.2 MPa Burst Pressure |
| Typical Pure Water Flux | 250–450 L/m²·h @ 0.1 MPa, 25°C |
| Compatibility | Interchangeable with Dow/Omexell UF Modules (e.g., 2660, 2860) |
| Application Scope | Municipal Wastewater Reuse, RO Pretreatment, Industrial Feedwater, Bottled Water Production, Seawater Desalination Pretreatment, Oilfield Injection Water, High-Strength Industrial Effluent (Coal/Petrochemical), Pharmaceutical Biomolecule Recovery, Dairy Protein Fractionation, Fruit Juice Clarification & Concentration |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | Membrane Pilot Testing System |
| Pricing | Upon Request |
| Sample Processing | Wastewater Treatment |
| Membrane Types Supported | Ceramic & Organic (Polymeric) Membranes |
| Configurable MWCO Range | 1 kDa – 500 kDa |
| Operating Pressure Range | Up to 10 bar |
| Feed Capacity | 5–100 L per batch |
| System Architecture | Skid-mounted, Modular, Benchtop-to-Pilot Scale |
| Key | Brand: Xinbaili (New Biolink) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Adsorption-Based COD Removal Technology |
| Pricing | Available Upon Request |
| Sample Processing | Industrial Wastewater Treatment |
| Brand | Xinbaili (New Biolink) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PV-1000 |
| Pricing | Upon Request |
| Sample Processing | Aqueous Organic Waste Stream Dehydration |
| Membrane Type | Inorganic Ceramic Composite Membrane |
| Operating Temperature Range | Up to 140 °C |
| Separation Driver | Partial Vapor Pressure Gradient |
| Core Mechanism | Solution–Diffusion Coupled with Molecular Sieving |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MD Deammonification Technology |
| Pricing | Available Upon Request |
| Application | Ammonia-Nitrogen Removal from Wastewater |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | NF-Series |
| Pricing | Available Upon Request |
| Sample Processing | Industrial Wastewater & Process Streams |
| Molecular Weight Cut-Off (MWCO) | 100–1000 Da |
| Membrane Charge | Surface-Charged (Donnan Exclusion Dominant) |
| Divalent Ion Rejection | >90% (e.g., SO₄²⁻, Ca²⁺, Mg²⁺) |
| Monovalent Ion Rejection | 10–40% (e.g., Na⁺, Cl⁻) |
| Operating Temperature Range | 5–45 °C |
| Max Inlet Pressure | 25 bar |
| Feed pH Range | 3–11 |
| Membrane Material | Polyamide Thin-Film Composite (TFC) |
| System Configuration | Benchtop Skid-Mounted with Recirculation Loop, Pressure Control, and Permeate Monitoring |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | Micro-Tac |
| Sample Processing | Wastewater Treatment |
| Core Technology | Integrated Fenton-based Advanced Oxidation Process (AOP) with Microwave Acceleration and Rare-Earth Metal Catalyst |
Show next