Industry-specific Instruments
Filter
Showing 3241–3270 of 6459 results
| Brand | Perten |
|---|---|
| Origin | USA |
| Model | LactoScope™ FT-B |
| Application | Lab & Online Alcoholic Beverage Analysis |
| Measurement Time | 45 s per sample |
| Analytes | Ethanol, Total Acidity, Total Ester, Ethyl Hexanoate, Ethyl Acetate, Ethyl Lactate, Acetaldehyde, Methanol, Propanol, sec-Butanol, Acetal, Isobutanol, Butanol, Ethyl Butyrate, Isoamyl Alcohol |
| Compliance | Designed for ISO 21563, AOAC Official Methods, and USP <1210> spectroscopic validation frameworks |
| Software | Perten WinISI III with GLP-compliant audit trail, 21 CFR Part 11 user authentication & electronic signature support |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Model | 8400 Series |
| Magnetic Field Range | Up to 2.23 T (DC), 1.44 T (AC, 50 mm gap) |
| Temperature Range | 10 K–1273 K (with optional cryostats/furnaces) |
| Mobility Range | 1×10⁻³ to 1×10⁶ cm²/V·s (AC/DC) |
| Resistivity Range | 1×10⁻⁵ to 1×10⁵ Ω·cm |
| Standard Resistance Range | 0.5 mΩ–10 MΩ |
| High-Resistance Option | up to 200 GΩ |
| Low-Resistance Option | down to ~0.5 µΩ |
| AC Frequencies | 0.05 Hz and 0.1 Hz |
| Sample Geometry Support | Van der Pauw, Hall bar, 4-point probe |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | FastHall Station |
| Pricing | Upon Request |
| Magnetic Field | 1 T (RT), 0.75 T (77 K) |
| Temperature Options | Room Temperature & Optional Liquid Nitrogen Cooling (77 K) |
| Resistance Range | 10 mΩ to 1 GΩ |
| Mobility Range | 0.01–10⁶ cm²/V·s |
| Resistivity Range | 1×10⁻⁵ to 10⁵ Ω·cm (typ.) |
| Carrier Concentration | 8×10² to 8×10²³ cm⁻³ (typ.) |
| Measurement Speed | <10 s per sample (typ.) |
| Sample Formats | Solder card (10×10×3 mm), Pin card (10×10×2 mm) |
| Hall Method | FastHall™ (field-reversal-free) and Van der Pauw / Hall bar configurations |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Model | M91 |
| Measurement Principle | FastHall™ (patented single-direction magnetic field Hall effect analysis) |
| Compliance | ASTM F76, ISO/IEC 17025-compatible operation |
| Software Interface | LakeSHORE HallScan™ v3.2 with 21 CFR Part 11 audit trail support |
| Standard Resistance Range | 10 mΩ to 10 MΩ |
| Extended Range (with M9-ADD-HR option) | 10 mΩ to 200 GΩ |
| Carrier Mobility Range | 0.001–1×10⁶ cm²/(V·s) |
| Sample Configurations | Van der Pauw, Hall bar, cloverleaf |
| Magnetic Field Compatibility | DC fields up to ±16 T (superconducting magnet-ready) |
| Thermal Drift Mitigation | Sub-50 ms measurement window, active thermal compensation algorithm |
| Data Output Format | CSV, HDF5, XML |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | MCS |
| Instrument Type | Variable-Temperature Hall Effect Tester |
| Constant Current Source Range | 1–20 mA |
| Mobility Range | 0.01–10⁶ cm²/V·s |
| Resistivity Range | 1×10⁻⁵ – 1×10⁵ Ω·cm |
| Carrier Concentration Range | 8×10² – 8×10²³ cm⁻³ |
| Typical Measurement Time | <10 s |
| Magnetic Field | 1 T (RT), 0.75 T (77 K) |
| Sample Dimensions (Max) | 10 mm × 10 mm × 3 mm (Solder Card) |
| Brand | Laman Optics |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | 71S0503A-LED |
| Price Range | USD $14,000 – $35,000 (FOB Guangdong) |
| Illumination Mode | Steady-State Operation |
| Spectral Range | 400–1100 nm |
| Spectral Match Class | A+ (0.875–1.125 per IEC 60904-9 Ed. 3) |
| Spatial Uniformity | ≤ ±2% (Class A) |
| Temporal Stability | ≤ ±2% over 1 h (Class A) |
| Beam Diameter | Ø70 mm |
| Light Source Lifetime | ≥100,000 h (at rated output) |
| Rated Power Consumption | 650 W |
| Warm-up Time to Stability | ≤15 min |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | DC1500-UDV |
| Wavelength | 568 nm |
| Wavelength Accuracy | ±2% FS |
| Bandwidth | 10 nm |
| Photometric Range | –2 to +2 AU |
| Photometric Accuracy | ±0.005 AU (at 1.0 AU) |
| Photometric Precision | ±0.001 AU (at 1.0 AU) |
| Display | 160 × 100 backlit LCD with 20 × 6 alphanumeric/graphic capability |
| Sample Cell | 10 mm square cuvette compatible |
| Detector | Silicon photodiode with integrated interference filter |
| Power | Rechargeable 3.7 V Li-ion battery, USB or AC adapter |
| Ingress Protection | IP67 |
| Compliance | CE marked |
| Interface | Mini-USB |
| Auto-off | Configurable (5 / 10 / 30 min idle) |
| Language Support | English, Chinese, Spanish, French, German, Italian, Portuguese |
| Brand | Lamy Rheology |
|---|---|
| Origin | France |
| Model | TX-700 |
| Force Capacity Options | 10 N (1 kg), 20 N (2 kg), 50 N (5 kg), 250 N (25 kg), 500 N (50 kg) |
| Force Resolution | 0.001 N (0.1 g) up to 250 N |
| Accuracy | ±0.01 N at 500 N |
| Speed Range | 0.1–10 mm/s (±0.2%) |
| Travel Height | 240 mm (0.1 mm resolution) |
| Temperature Range (with PT100) | –50 °C to +300 °C |
| Display | 7-inch color touchscreen (force, speed, distance, temperature, time, sensitivity, date/time, unit selection: g/N) |
| Safety | 4-digit operator ID lock |
| Languages | French, English, Spanish, Russian |
| Operating Modes | Compression, Relaxation, Tension, TPA Cycle, Penetration, Relative Compression |
| Analog Output | 4–20 mA |
| Interfaces | RS232, USB (PC & printer), PLC-compatible |
| Power Supply | 90–240 V, 50/60 Hz |
| Dimensions | 610 × 340 × 650 mm |
| Weight | 22 kg |
| Key | Brand: LAMY |
|---|---|
| Origin | France |
| Model | TX-700 |
| Force Range | 500 N |
| Force Resolution | 0.001 N (for ≤50 N sensors), 0.01 N (for ≥250 N sensors) |
| Force Accuracy | ±0.05 % of full scale |
| Speed Range | 0.1–10 mm/s (±0.2 %) |
| Maximum Travel Distance | 240 mm |
| Displacement Resolution | 0.1 mm (0.01 mm with RheoTex software) |
| Temperature Probe | PT100, –50 to +300 °C |
| Display | 7-inch color touchscreen |
| Power Supply | 90–240 VAC, 50/60 Hz |
| Dimensions | 610 × 340 × 710 mm |
| Weight | 25 kg |
| Brand | LAND |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MillWatch / SiloWatch |
| Pricing | Available Upon Request |
| Brand | LANENDE Intelligent Technology |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Producer |
| Origin Category | Domestic (China) |
| Model | LD |
| Price | USD 28.50 (FOB) |
| Assay Time | ≤5 min per sample |
| Format | Lateral Flow Immunoassay (LFIA) with Colloidal Gold Conjugate |
| Brand | LANENDE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LD-DY10 |
| Instrument Category | Multi-Mycotoxin Rapid Quantitative Analyzer |
| Detection Principle | Fluorescent Lateral Flow Immunoassay (FLFIA) |
| Detection Channels | 6 independent quantitative channels |
| Fluorescence Excitation Wavelength | 365 nm |
| Detector | Silicon Photodiode |
| Sample Processing Time | ≤12 min (including extraction and assay) |
| Assay Time per Test Strip | <4 s |
| Repeatability (CV) | ≤0.8% |
| Stability (Drift) | ≤0.6% |
| Relative Standard Deviation (RSD) | ≤6% |
| Data Storage Capacity | ≥1,000,000 records |
| Operating Temperature | 5–40 °C |
| Humidity Range | 10–90% RH |
| Dimensions (W×D×H) | 300 × 240 × 125 mm |
| Net Weight | 1.7 kg |
| Power Supply | 220 V ±22 V, 50 Hz ±1 Hz |
| DC Output | 12 V / 5 A |
| Rated Power | 40 W |
| Connectivity | Dual USB-A, USB-B, RJ45 Ethernet, Wi-Fi 802.11 b/g/n, Bluetooth 4.2 |
| Brand | LANENDE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | LD-JQ12 |
| Detection Limit | 1 mg/kg |
| Detection Range | 0–100 mg/kg |
| Absorbance Range | 0.000–4.000 A |
| Repeatability | ±0.1% (A) |
| Absorbance Repeatability Error | ≤0.003 A |
| Photometric Drift | ±0.002 A (3 min) |
| Absorbance Accuracy | ±2.0% |
| Linearity Error | ±1.0% |
| Processor | ARM Cortex-A7 RK3288 (4-core, 1.88 GHz) |
| Display | 7-inch capacitive touchscreen (Chinese UI) |
| Power Supply | DC 12 V (supports vehicle power & optional 6 Ah Li-ion battery) |
| Detection Channels | ≥12 independent optical channels |
| Connectivity | Ethernet, Wi-Fi, GPRS, USB 2.0 |
| Data Output | Thermal printer (embedded), QR code generation, cloud upload via regulatory platform |
| Compliance Support | Designed for routine QC in food safety labs operating under GB 5009.49–2023, ISO/IEC 17025-aligned workflows, and internal GLP procedures |
| Brand | LANENDE Intelligent Technology |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LD-SSJ |
| Price | USD 780 (FOB) |
| Detection Method | Colloidal Gold Immunochromatographic Assay |
| Connectivity | Wi-Fi, 4G, GPRS, Ethernet |
| Reporting | Integrated Thermal Printer with QR Code Output |
| Data Management | Cloud & LAN-Compatible Regulatory Platform |
| Sample Throughput | Multi-channel Simultaneous Analysis |
| Regulatory Alignment | Designed for Compliance with CNAS-CL01, GB/T 27404–2008, and GB 29693–2013 |
| Sample Types | Raw meat, minced pork/beef, liver, urine, feed extracts |
| Detectable Analytes | Clenbuterol hydrochloride, Ractopamine, Salbutamol, Diethylstilbestrol, Carbadox |
| Expandability | Modular firmware architecture supports future assay kits (e.g., antibiotics, sulfonamides, tetracyclines) |
| Brand | LANENDE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LD-SY20 |
| Price | USD 2,050 (FOB) |
| Brand | Langbo Instruments |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | LBJK-3 |
| Price | USD 27,500 (FOB Jiangsu) |
| Temperature Control Range | 0–800 °C |
| Control Accuracy | ±3 °C |
| Power Supply | 220 V, 50 Hz, 8 kW |
| Y-value Accuracy | <2 mm (Y > 20 mm), <1 mm (Y < 20 mm) |
| X-value Accuracy | ΔX < 3 mm |
| Thermocouple Type | K-type |
| Accuracy Class | 0.5 |
| Load Cell Range | 0–10 kg |
| Displacement Sensor Range | 0–100 mm, Class 0.01 |
| Stepper Motor Holding Torque | 10 N·cm |
| Probe Design | Rotating, Auto-Alignment |
| Data Acquisition | PC-based, Real-time Curve Rendering (X/Y Volume Curves) |
| Compliance | Fully Conforms to GB/T 479–2016 |
| Safety | Integrated Power-Failure Protection |
| Software | Custom GUI with ASTM/ISO-aligned reporting templates, Manual & Auto Measurement Modes |
| Brand | Langbo Instruments |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Region | Domestic (China) |
| Model | LBJK-3A |
| Price | USD 40,200 (FOB Jiangsu) |
| Temperature Range | 0–800 °C (Resolution: 0.1 °C |
| Control Accuracy | ±0.5 °C) |
| Heating Program | 0–250 °C @ 8 °C/min (30 min), 250–800 °C @ 3 °C/min (160 min) |
| Y-value Repeatability | ±2 mm (Y > 20 mm), ±1 mm (Y ≤ 20 mm) |
| X-value Repeatability | ±3 mm |
| Thermocouple | Armored K-type, Class 0.5 |
| Load Cell Accuracy | 0.02 % FS |
| Volume Sensor Accuracy | 0.05 % FS |
| Probe Displacement Sensor Accuracy | 0.01 % FS |
| Exhaust Motor Power | 60 W |
| Push Rod Max Force | 800 N |
| Dimensions | 600 × 450 × 1150 mm |
| Power Supply | 220 V, 50 Hz, 8 kW (dual furnace) |
| Brand | Langbo Instruments |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | LBSF-3A |
| Price | USD 40,200 (FOB Jiangsu) |
| Power Supply | 220 V AC, 50 Hz |
| Max. Power Consumption | 9 kW (scalable +3 kW per additional 6 stations) |
| Operating Temperature Range | 0–300 °C |
| Number of Stations | Configurable — 6 / 12 / 18 / 24 (standard configuration: 18 stations) |
| Sample Capacity per Station | Coal or coke: 500 g ±10 g |
| Iron ore | 1000 g ±10 g |
| Chamber Dimensions (per dual-station unit) | 600 × 400 × 250 mm |
| Integrated Balance | Dual independent load cells per station |
| Balance Capacity | 3 kg |
| Balance Resolution | 0.1 g |
| Weighing Mode | Real-time in-situ gravimetric monitoring during drying |
| Sample Tray Material | Stainless steel (individual, non-interfering trays) |
| Compliance | GB/T 211–2017, GB/T 2001–2011, GB/T 483–2007, GB/T 6730.2–2018 |
| Data Output | CSV, PDF, XML |
| Software Features | Audit trail, user-level access control, automated report generation, curve visualization (mass vs. time), GLP-compliant data archiving |
| Brand | Langbo |
|---|---|
| Origin | Jiangsu, China |
| Model | LKB-MF |
| Temperature Range (Bath A) | 0–50°C |
| Temperature Range (Bath B) | 5–80°C |
| Temperature Stability | ≤ ±0.5°C |
| Temperature Uniformity | ≤ ±0.1°C |
| Circulating Pump Flow Rate | >8 L/min |
| Heating Power | 1000 W |
| Chamber Dimensions | 150 × 200 × 200 mm × 2 independent baths |
| Construction | Stainless steel inner tank, electrostatically sprayed steel outer shell, fiberglass insulation |
| Cooling System | Air-cooled, hermetically sealed compressor unit |
| Display Resolution | 0.1°C |
| External Circulation Capability | Yes |
| Compliance | GB/T 24970–2010 |
| Brand | Langzauner |
|---|---|
| Origin | Austria |
| Model | Langzauner Series |
| Drive Type | Servo-controlled hydraulic |
| Pressure Range | 1.5–3,000 metric tons |
| Positional Accuracy | ±0.05 mm |
| Pressure Accuracy | ±1% of full scale |
| Platen Flatness Tolerance | ±0.1 mm |
| Temperature Sensor Inputs | 4 channels |
| Energy Savings vs. Conventional Proportional Systems | >70% |
| Noise Level | Optimized to minimum operational dB(A) |
| Compliance | Designed for ISO 9001-aligned manufacturing environments and GLP-compliant laboratory integration |
| Brand | Lanjing |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LJ-GS600 |
| Price | USD 4,500 (FOB) |
| Display | 10-inch capacitive touchscreen |
| Operating System | Android-based UI with embedded operation videos |
| Connectivity | Wi-Fi, 4G LTE, GPRS, Ethernet |
| Power Supply | DC 12 V (vehicle-compatible), optional 6 Ah rechargeable Li-ion battery |
| Dimensions | 43 × 35 × 19 cm |
| Net Weight | 5.1 kg |
| Detection Channels | 24 optical channels with quad-wavelength cold light source (410 / 520 / 590 / 630 nm) |
| Gold Immunochromatographic Modules | Dual-track automatic scanning, real-time camera imaging, auto CT-line recognition |
| Data Storage | 200,000 test records |
| Output | Thermal printer (QR code + report), USB 2.0 export (Excel), cloud upload via regulatory platform |
| Regulatory Compliance | Pre-loaded national MRLs (GB standards), updatable firmware, audit-trail ready for GLP-aligned workflows |
| Brand | Lanjing |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | LJ-KSS |
| Price | USD 820 (FOB Qingdao) |
| Brand | Lanjing |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Regional Classification | Domestic (China) |
| Model | LJ-SSJ |
| Storage Capacity | 200,000 test records |
| Brand | Lanjing |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | LJ-TPY-2 |
| Magnetic Field Strength | >1.6 T at air-gap center |
| Maximum Magnetic Gradient | >5.0 T/cm |
| Oil Sample Delivery | Electronically controlled micro-air pump with 0–99 stepless flow adjustment |
| Ferrogram Substrate Dimensions | 0.17 × 24 × 60 mm |
| Substrate Tilt Angle | Continuously adjustable with mechanical lock |
| Timer Range | 0–60 min (with audible alert) |
| Display | 240 × 128 high-resolution LCD |
| Dual-Channel Operation | Simultaneous preparation of two ferrograms |
| Power Supply | 220 V, 50 Hz |
| Brand | Lanjing |
|---|---|
| Model | LJ-WH1000 |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Price | USD 8,400 (approx.) |
| Spectral Bands | 6-band configurable (RGB + narrowband green @ 550±10 nm, red @ 650±10 nm, NIR @ 850±10 nm) |
| Sensor | CMOS, 5 MP native resolution |
| Lens | 6–12 mm focal length, FOV 60°–120° |
| Storage | 16 GB internal (expandable to 128 GB) |
| Connectivity | Ethernet, Wi-Fi, 4G LTE |
| Power | Sleep mode 0.9 W (180 mA), operational 4.5–7 W (900–1400 mA) |
| Operating Temp | −40 °C to +60 °C |
| Humidity Range | 0–100 % RH |
| IP Rating | IP67 |
| Dimensions | 150 × 150 × 150 mm |
| Weight | 500 g (including mounting platform and bracket) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | LAwave |
| Pricing | Available Upon Request |
| Brand | Lawler |
|---|---|
| Origin | USA |
| Model | 64-22 |
| Compliance | ASTM D1478, ASTM D4693 |
| Operating Temperature Range | –73 °C to ambient |
| Temperature Stability | ±0.3 °C |
| Temperature Display Resolution | 0.1 °C |
| Drive Speed | 1 rpm (fixed) |
| Test Stations | 1 or 2 independent |
| Torque Sensing | Strain-gauge-based, digital readout |
| Cooling System | Dual hermetic mechanical compressors |
| Air Bath Seal Integrity | High-efficiency insulated lid with positive closure |
| Optional Feature | Torque-limit safety cutoff (with Option V) |
| Brand | Lawler |
|---|---|
| Origin | USA |
| Model | LB-76-2TG |
| Temperature Range | −60 °C |
| Temperature Stability | ±0.3 °C |
| Sample Capacity | 28 samples per bath |
| Compliance | ASTM D2983-03, ISO 9262, IP 267 |
| Configuration | Floor-standing air-bath viscometry system |
| Dimensions (W×D×H) | 83 × 94 × 117 cm |
| Weight | 500 lbs |
| Brand | Lawler |
|---|---|
| Origin | USA |
| Model | 323 |
| Temperature Range | 24–150 °C |
| Temperature Stability | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Test Positions | 4 |
| Air Flow Control | Dual digital mass flow meters (94 ± 5 mL/min and 200 ± 5 mL/min) |
| Compliance | ASTM D892, ASTM D6082, SH/T 0722–2002 |
| Heating Method | Forced-air bath with independent digital sample temperature probes |
| Interface | Touchscreen LCD controller |
| Viewing Window | Large optical-grade front window |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LBIC |
| Price Range | USD 140,000 – 280,000 |
| Measurement Mode | AC-coupled photocurrent detection |