Laser Instruments
Filter
Showing 961–984 of 984 results
| Brand | Wasatch Photonics |
|---|---|
| Origin | USA |
| Model | WP-1200/830-25.4 |
| Clear Aperture | 25.4 mm (1-inch round) |
| Nominal Groove Density | 1200 lines/mm |
| Design Wavelength | 830 nm |
| Mounting | Rugged epoxy-bonded fused silica substrate in black anodized aluminum ring |
| Efficiency | >90% peak diffraction efficiency (TM-polarized, optimized design) |
| Polarization Sensitivity | <5% efficiency variation across full polarization state |
| Spectral Bandwidth | ±50 nm typical FWHM for high-efficiency operation |
| Damage Threshold | >500 mJ/cm² (10 ns, 1064 nm, 10 Hz) |
| Brand | Workshop of Photonics (WOP) |
|---|---|
| Origin | Lithuania |
| Model | FemtoFBG |
| Laser Type | Solid-State Femtosecond Oscillator + Amplifier |
| Writing Methods | Point-by-Point (PbP), Line-by-Line (LbL), Plane-by-Plane |
| Minimum Grating Pitch | ~1 µm |
| Phase-Mask-Free Operation | Yes |
| Compatible Fibers | Single-Mode, Dual-Clad, Multi-Core, Photonic Crystal, and Specialty Fibers |
| Max Fiber Diameter | 1 mm |
| Integrated Autofocus (FCA) | Standard |
| Polarization Control | Standard |
| Precision Positioning & Scanning Stage | Standard |
| Optional Configuration | Dual-Wavelength Laser, Phase-Mask-Assisted Writing, Apodization Engine |
| Brand | Xiton |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | IMPACT Series |
| Core Component | Diode-Pumped Nanosecond Solid-State Laser System |
| Wavelength Options | 1064 nm (fundamental), 532 nm (second harmonic), 355 nm (third harmonic) |
| Average Power | Up to 12 W @ 1064 nm, 6.0 W @ 532 nm, 3.0 W @ 355 nm |
| Pulse Width | <10 ns @ 1064/532 nm, <8 ns @ 355 nm |
| Repetition Rate | 1–200 kHz (1064 nm), 1–50 kHz (532/355 nm) |
| Pulse Energy | 900 µJ @ 1064 nm, 500 µJ @ 532 nm, 300 µJ @ 355 nm |
| Beam Quality (M²) | <1.2 @ 1064/532 nm, <1.3 @ 355 nm |
| Pulse-to-Pulse Stability (σ) | <2% |
| Cooling | Air-cooled, no external heat sink required |
| Control Interface | RS-232, software-controllable with multiple trigger modes (TTL, analog, external sync) |
| Enclosure | Hermetically sealed, industrial-grade housing |
| Beam Mode | TEM₀₀ |
| Brand | XITON |
|---|---|
| Origin | Germany |
| Model | IMPRESS 213/224 nm |
| Wavelength | 213 nm / 224 nm |
| Average Output Power | 150 mW (213 nm) / 300 mW (224 nm) |
| Pulse Width | <7 ns (213 nm) / <9 ns (224 nm) |
| Pulse Energy | >15 µJ (213 nm) / >30 µJ (224 nm) |
| Repetition Rate | 0.1–30 kHz |
| Beam Quality (M²) | <1.6 |
| Pumping Method | Diode-Pumped |
| Q-Switching | Active |
| Laser Medium | Solid-State (Nd:YAG-based harmonic generation) |
| Brand | XITON |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | IMPRESS 213 / IMPRESS 224 |
| Core Configuration | Diode-Pumped Q-Switched Solid-State Laser System |
| Wavelength | 213 nm / 224 nm |
| Average Output Power | 150 mW / 300 mW |
| Pulse Width | <7 ns / <9 ns |
| Pulse Energy | >15 µJ / >30 µJ |
| Repetition Rate | 0.1–30 kHz |
| Beam Quality (M²) | <1.6 / <1.6 |
| Control Interface | RS-232 |
| Beam Mode | TEM₀₀ |
| Cooling | Air-Cooled |
| Duty Cycle | Continuous Industrial Operation (24/7) |
| Brand | Xiton |
|---|---|
| Origin | Germany |
| Model | IXION-193 SLM |
| Wavelength | 193.368 nm |
| Average Output Power | >10 mW |
| Pulse Width | <10 ns |
| Pulse Energy | 1.6 µJ |
| Repetition Rate | 6 kHz |
| Beam Quality (M²) | <1.6 |
| Spectral Linewidth | <120 MHz (<0.015 pm, <0.004 cm⁻¹) |
| Tuning Range | >80 GHz (>10 pm, >2.6 cm⁻¹) |
| Coherence Length | >1 m |
| Beam Mode | TEM₀₀ |
| Pump Source | Diode-Pumped Solid-State |
| Cooling | Thermoelectric Temperature Control |
| Control Interface | LabVIEW-compatible Driver |
| Brand | XITON |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | IXION-193 SLM |
| Core Configuration | Diode-Pumped All-Solid-State Laser System |
| Wavelength | 193.368 nm (tunable ±2 nm) |
| Average Power | >10 mW |
| Pulse Width | <10 ns |
| Pulse Energy | >1.6 µJ |
| Repetition Rate | 6 kHz |
| Beam Quality (M²) | <1.6 |
| Spectral Linewidth | <120 MHz (<0.015 pm, <0.004 cm⁻¹) |
| Tuning Range | >80 GHz (>10 pm, >2.6 cm⁻¹) |
| Coherence Length | >1 m |
| Long-Term Power Stability | <±0.5% (24 h) |
| Beam Profile | TEM₀₀ |
| Optional Integrated High-Resolution Spectrometer | ±1 pm accuracy |
| Brand | Xiton |
|---|---|
| Origin | Germany |
| Model | Pixie Series |
| Wavelengths | 1342 nm / 671 nm / 447 nm |
| Average Power | 1.8 W (Pixie), 0.7 W (Pixie-S), 0.5 W (Pixie-T) |
| Pulse Width | <6 ps |
| Pulse Energy | 12 nJ (Pixie), 4.5 nJ (Pixie-S), 3.5 nJ (Pixie-T) |
| Repetition Rate | 143 MHz |
| Beam Quality (M²) | <1.3 |
| Pump Source | Laser Diode |
| Pulse-to-Pulse Stability | <0.5% RMS (24 h) |
| Pulse Shape | sech²-profile |
| Operating Mode | CW-mode-locked, industrial-grade |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Xiton |
|---|---|
| Origin | Germany |
| Product Type | Solid-State Q-Switched Laser |
| Wavelength Options | 1064 nm, 532 nm, 355 nm, 266 nm, 193.368 nm |
| Spectral Linewidth | <80 MHz (1064/532/355 nm), <100 MHz (193.368 nm) |
| Pulse Width | <12 ns (1064 nm), <10 ns (355 nm), <8 ns (213 nm), 6–8 ns (193.368 nm) |
| Repetition Rate | 8–15 kHz |
| Beam Quality (M²) | <1.2 (1064 nm), ≤1.6 (193.368 nm) |
| Pulse-to-Pulse Stability (σ) | <0.3% (all models, measured at 10 kHz) |
| Average Power | ≥8.0 W (1064 nm), ≥4.0 W (532 nm), ≥2.0 W (355 nm), ≥100 mW (213 nm), ≥10 mW (193.368 nm) |
| Pulse Energy | 800 µJ (1064 nm), 400 µJ (532 nm), 200 µJ (355 nm), 10 µJ (213 nm), 1.6 µJ (193.368 nm) |
| Brand | Yenista |
|---|---|
| Origin | France |
| Model | OSICS T100 |
| Laser Type | External Cavity Semiconductor Laser (ECSL) |
| Tuning Range | ≥100 nm (O/E/S/C/L/U bands) |
| Output Power | +6 dBm |
| Spectral Linewidth | <100 kHz (typ.) |
| Relative Intensity Noise (RIN) | <−170 dB/Hz (typ.) |
| Tuning Speed | <50 ms (full range) |
| Modulation Bandwidth | DC to 1 MHz |
| Interface | Front-panel keypad & LCD, RS-232, USB, Ethernet (SCPI-compliant) |
| Compliance | CE, RoHS, IEC 61000-6-3, IEC 61000-6-4 |
| Brand | Yenista |
|---|---|
| Origin | France |
| Model | Tunics Reference ES/SCL |
| Tuning Range (mode-hop-free) | Up to 160 nm |
| Absolute Wavelength Accuracy | ±25 pm (±5 pm with Integrated Wavelength Meter option) |
| Wavelength Stability | ±5 pm/h (±1 pm/h with IWM) |
| Output Power | > +10 dBm |
| Linewidth (FWHM) | 500 kHz typical (coherence-controlled) |
| Wavelength Setting Resolution | 1 pm |
| Scan Speed | 1–100 nm/s (adjustable) |
| Power Stability | ±0.01 dB/h |
| SMSR | >45 dB |
| RIN | –145 dB/Hz (typ.) |
| Optical Isolation | 35 dB |
| Return Loss | 60 dB |
| Interface | RS-232C, IEEE-488.2 (GPIB) |
| Operating Temperature | +18 to +35 °C |
| Dimensions (W×H×D) | 480 × 133 × 370 mm |
| Weight | 12.5 kg |
| Brand | Yenista |
|---|---|
| Origin | France |
| Model | TUNICS T100R |
| Wavelength Range | 1490–1650 nm |
| Absolute Wavelength Accuracy | ±5 pm |
| Output Power | >+10 dBm |
| Scan Speed | Up to 100 nm/s |
| ASE Suppression Ratio (SSE) | >100 dB |
| Linewidth (FWHM) | 500 kHz (typ., coherence control off) |
| Wavelength Repeatability | ±1 pm (typ.) |
| Power Stability | ±0.01 dB/h |
| Interface | RS-232C, IEEE-488.2 (GPIB) |
| Operating Temperature | +18 to +30 °C |
| Dimensions | 448 × 133 × 370 mm |
| Weight | 12.5 kg |
| Brand | Yenista |
|---|---|
| Origin | France |
| Model | TUNICS T100S-HP |
| Wavelength Range | 1240–1680 nm |
| Output Power | ≥ +8 dBm (full range), ≥ +13 dBm (peak) |
| ASE Suppression Ratio (SSSER) | ≥ 90 dB (100 dB typical) |
| Wavelength Accuracy | ±20 pm |
| Wavelength Repeatability | 5 pm (typ.) |
| Tuning Resolution | 1 pm (0.1 pm in fine-tuning mode) |
| Linewidth | <400 kHz (coherence control off), >100 MHz (coherence control on) |
| RIN | –145 dB/Hz (typ.) |
| Scan Speed | 1–100 nm/s (continuous, mode-hop-free) |
| Power Stability | ±0.01 dB/h (±0.025 dB/24 h typ.) |
| Relative Humidity | <80% non-condensing |
| Operating Temperature | +15 °C to +30 °C |
| Laser Class | 1M |
| Dimensions | 448 × 370 × 133 mm |
| Weight | 12.5 kg |
| Interface | RS-232C, GPIB (IEEE-488.1) |
| Fiber Output | SMF or PMF (optional) |
| Connector | FC/APC |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FCPA Series |
| Core Technology | Yb-doped all-fiber ultrafast oscillator-amplifier architecture |
| Wavelength | 1041–1045 nm (±5 nm) |
| Average Power | 1–20 W |
| Pulse Duration | ≤350–600 fs |
| Pulse Energy | ≥10–50 μJ |
| Repetition Rate | 100 kHz – 1 MHz |
| Beam Quality (M²) | ≤1.3 |
| Cooling | Air-cooled laser head |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 (Laser Product Safety) |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | L3D 2 5M |
| Light Source | Blue-light LED-based structured illumination (not free-electron laser) |
| Detection Principle | Fringe projection photogrammetry with stereo camera triangulation |
| System Type | Contactless, markerless 3D optical coordinate measurement system |
| Compliance | Designed for industrial metrology applications aligned with VDI/VDE 2634 Part 2 and ISO 10360-8 standards |
| Brand | Zhengye Laser |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Region of Origin | Domestic (China) |
| Model | PCB Warpage Flattening & Inspection Tri-Function System |
| Price Range | USD 70,000 – 140,000 |
| Core Component | Infrared Heating Array (not free-electron laser — correction applied per technical accuracy) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | DUV-FS Series |
| Pricing | Available Upon Request |
| Wavelength Range | 192–300 nm (continuously tunable) |
| Fundamental Options | Ti:Sapphire (780 nm, tunable), Yb-based (1030/1064 nm) |
| Pulse Width | ≤500 fs (at DUV output, dependent on harmonic generation stage) |
| Repetition Rate | 80 MHz |
| Beam Pointing Stability | <5 µrad RMS over 8 hours |
| Control Interface | Motorized wavelength tuning with GUI-based software |
| Output Power | Up to ~4 mW at 195 nm (with ≥2.5 W fundamental @ 780 nm) |
| Dimensions (L×W×H) | 1300 × 600 × 200 mm³ (laser head only, excluding fundamental source) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | Femtosecond Micromachining System |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Femtosecond Micromachining System |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | FFL-20 |
| Pricing | Upon Request |
| Repetition Rate | 1 Hz – 1 MHz (software-tunable) |
| Pulse Width | 350 fs – 10 ps (software-tunable) |
| Output Configuration | Dual-variant — HE (High-Energy) and HR (High-Repetition-Rate) versions |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | FFL-25 |
| Core Architecture | Solid-State Amplified Chirped Pulse Amplification (CPA) Laser System |
| Output Configuration | Free-Space Beam Delivery |
| Laser Class | Class 4 |
| Central Wavelengths | 1030 ± 5 nm (fundamental), 515 ± 3 nm (second harmonic) |
| Average Power | >20 W (1030 nm), >2.5 W (515 nm) |
| Pulse Energy | >200 µJ @ 100 kHz (1030 nm), >25 µJ @ 100 kHz (515 nm) |
| Pulse Duration | Adjustable from 600 fs to 10 ps |
| Repetition Rate | Single-shot to 1 MHz (software-tunable) |
| Beam Quality | M² < 1.3 |
| Beam Pointing Stability | <25 µrad (rms, 8 hrs) |
| Power Stability | <0.5% rms (24 hrs) |
| Beam Divergence | <1 mrad |
| Polarization Extinction Ratio | 100:1 |
| Dimensions (Amplifier Unit) | 750 × 500 × 156 mm |
| Dimensions (SHG Module) | 210 × 500 × 93 mm |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Laser-Induced Fluorescence Spectroscopic Diagnostic System |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | ZL-OPA |
| Type | Optical Parametric Amplifier (OPA) |
| Pump Compatibility | Yb-based ultrafast solid-state or fiber lasers |
| Pump Energy Range | 10 µJ – 2 mJ |
| Pump Pulse Duration | 35 fs – 1.5 ps |
| Tuning Range (Signal/Idler) | 630–1030 nm / 1030–2500 nm (ZL-OPA-HP) |
| Output Pulse Width | <500 fs (ZL-OPA-HP), <100 fs (ZL-OPA-HE) |
| Long-Term Power Stability | <1% RMS @ 750 nm over 8 h |
| Peak Output Energy | >15 µJ @ 750 nm (ZL-OPA-HP), >10 µJ @ 750 nm (ZL-OPA-HE) |
| Polarization | Linear |
| Optional UV Extension | 325–515 nm (via SHG/SFG), Green Extension: 515–650 nm (ZL-OPA-HP) |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Zhongli Han Guang Co., Ltd.) |
| Brand | Zurich Instruments |
|---|---|
| Origin | Switzerland |
| Model | UHF-AWG |
| Output Channels | 2 |
| DAC Resolution | 14 bit |
| Max Sample Rate | 1.8 GSa/s |
| Waveform Memory | 128 MSa per channel |
| Output Frequency Range | DC – 600 MHz |
| Output Amplitude | ±150 mV / ±1.5 V (DC-coupled, 50 Ω) |
| Phase Noise | −120 dBc/Hz @ 10 MHz (100 Hz offset), −130 dBc/Hz @ 10 MHz (1 kHz offset) |
| Sequencer Instructions | 1024 core + dynamic expansion |
| Feedback Latency | <1 µs |
| Trigger Delay | <150 ns |
| Trigger Jitter | 2.2–4.4 ns |
| Built-in Oscillators | 2 (expandable to 8 with UHF-MF option) |
| Modulation Modes | Direct output & AM mode with internal oscillator reference |
| Digital Outputs | 32-bit parallel, 2 markers per channel, 4 AUX outputs |
| Input Triggers | Lock-in, scope, counter, external, internal |
| Optional Modules | UHF-DIG (digitizer), UHF-MF (multi-frequency), UHF-RUB (rubidium clock), UHF-CNT (pulse counter) |