Laser Instruments
Filter
Showing 91–120 of 977 results
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | Single-Longitudinal-Mode (SLM) |
| Output Power | >2 W |
| Optical Linewidth | <5 kHz |
| Frequency Drift (24 h) | <100 MHz |
| Polarization Extinction Ratio | >25 dB |
| Beam Quality (M²) | <1.1 |
| Cooling | Conductive/Thermoelectric |
| Compliance | RoHS, CE |
| Brand | Auniontech |
|---|---|
| Model | 80 MHz |
| Laser Type | Mode-Locked Solid-State Femtosecond Oscillator |
| Repetition Rate Difference (Δf<sub>rep</sub>) | Tunable, Typically < 1 kHz |
| Output Wavelength | ~1030–1064 nm (Yb-doped solid-state) |
| Pulse Duration | < 200 fs (typ.) |
| Comb Spacing | 80 MHz (primary comb), Δf<sub>rep</sub> ≈ 100 Hz–1 kHz (secondary comb) |
| Noise Performance | Sub-100 attosecond timing jitter (integrated 10 Hz–10 MHz), < −160 dBc/Hz RIN (1 MHz offset) |
| Cavity Architecture | Monolithic, All-PM Fiber or Hybrid Bulk-Fiber |
| Compliance | CE Marked, RoHS Compliant |
| Software Interface | USB 2.0 / Ethernet, SCPI-compatible command set |
| Operating Environment | 15–30 °C, < 70% RH non-condensing |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | 9951A (8-slot) / 9951Y (18-slot) |
| Interface Support | LAN (64 concurrent clients), RS232C (9951A only), USB |
| Power Meter Range | –80 dBm to +26 dBm |
| Wavelength Range | 800–1700 nm |
| Attenuation Range | 0–65 dB |
| Polarization Scrambling | ≤5% DOP after scrambling |
| Display | 4.3″ HD touchscreen (9951A only) |
| Module Auto-ID | Yes |
| Compliance | CE-marked |
| Brand | Auniontech |
|---|---|
| Origin | Spain |
| Type | Fiber-based femtosecond oscillator |
| Model | Arche |
| Central Wavelength | 1550 nm ± 5 nm |
| Spectral Bandwidth | >15 nm |
| Repetition Rate | 65 MHz ± 2 MHz |
| Average Output Power | 20 mW |
| Pulse Duration | <250 fs |
| Pulse Energy | 308 pJ |
| Peak Power | 1.23 kW |
| Polarization | Linear |
| Beam Quality (M²) | <1.2 |
| Output | SMF-28 fiber pigtail, 0.25 m standard (customizable) |
| Operating Temperature | 0–60 °C |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | AUL-CL-TL1550 |
| Wavelength Range | 1527.6–1608.76 nm (C+L Band) |
| Tuning Range | 55 nm (C-band), 38.75 nm (L-band) |
| Linewidth | ≤15 kHz (typ.) |
| Output Power | +7 to +18 dBm (5–60 mW) |
| SMSR | ≥40 dB (typ. 55 dB) |
| OSNR | ≥40 dB (typ. 60 dB) |
| Frequency Accuracy | ±1.5 GHz |
| Frequency Resolution | 100 MHz (set), 1 MHz (fine tuning) |
| Fine Tuning Range | ±30 GHz |
| Wavelength Drift (No-Drift Mode) | <1 pm over 24 h |
| RIN | ≤−145 dB/Hz (10 MHz–1 GHz) |
| PER | ≥18 dB |
| Fiber Type | Panda-type PM fiber |
| Operating Temperature | 0–50 °C |
| Storage Temperature | −40–85 °C |
| Dimensions | 74 × 30 × 12 mm³ |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | AUT-500W-W |
| Spectral Range | 0.19–25 µm |
| Max Continuous Power | 500 W |
| Max Intermittent Power | 600 W (1 min), 500 W (2 min) |
| Max Avg. Power Density | 20 kW/cm² |
| Max Energy Density | 0.3 J/cm² (1064 nm, 1 ns) |
| Aperture | 40 mm |
| Resolution | 20 mW |
| Nonlinearity | ±1.5% |
| Accuracy | ±3% |
| Response Time | <3 s |
| Cooling | Water-cooled |
| Interface | DB-9M |
| Cable Length | 1.5 m |
| Brand | Auniontech |
|---|---|
| Model | AUT-FQCW-266 |
| Wavelength | 266 nm |
| Output Power | Up to 500 mW |
| Linewidth | < 300 kHz |
| Coherence Length | > 1000 m |
| Beam Quality (M²) | < 1.3 |
| Beam Divergence | < 0.8 mrad (full angle) |
| Intensity Noise | < 0.5% RMS (100 kHz – 10 MHz) |
| Power Stability | < 1% over 8 h |
| Power Consumption | < 200 W (avg. 100 W) |
| Footprint | 380 × 270 mm |
| Control Interfaces | RS232, USB |
| Laser Type | Diode-Pumped Solid-State (DPSS), CW, TEM₀₀ |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | AUT-LCV10 / AUT-LCN20 / AUT-LCS10 |
| Spectral Range | 420–750 nm / 450–950 nm / 920–1700 nm |
| FWHM | 10 nm @ 550 nm / 10 nm @ 550 nm / 15 nm @ 1200 nm |
| Tuning Resolution | 1 nm |
| Center Wavelength Accuracy | ≤±2 nm / ≤±1 nm / ≤±2 nm |
| Max Polarization-Dependent Transmission | ≥36% / ≥32% / ≥32% |
| Out-of-Band Rejection | ≥OD2.5 / ≥OD3 / ≥OD2.5 |
| Response Time | 10–200 ms / <100 ms / 10–200 ms |
| Field-of-View Compensation | ±5° |
| Interface | USB 2.0 Type B (locking) |
| Software | SetLCTF GUI + SDK (C/C++ compatible) |
| Operating Temperature | 0–45 °C |
| Dimensions (W×H×D) | 98.5×63×30 mm / 124.5×84×36.5 mm / 98.5×67×40 mm |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | AUT-SpectraLED-GS / AUT-SpectraLED-Pro / AUT-SpectraLED-QC21 / AUT-SpectraLED-QC33 / AUT-SpectraLED-QC5 |
| Spectral Range | 360–780 nm (model-dependent) |
| Correlated Color Temperature (CCT) | 2000–20000 K, ±1% accuracy |
| Illuminance Range | 0.1–100,000 lux (adjustable) |
| LED Channels | 14 to 55 (configurable per model) |
| Luminous Stability (short-term) | ΔCCT ≤ ±20 K, ΔIlluminance ≤ ±1% |
| Luminous Stability (long-term) | ΔCCT ≤ ±32 K, ΔIlluminance ≤ ±2% |
| Preheat Time | ≤ 120 s |
| LED Lifetime | ≥ 15,000 h |
| Control Interface | Touchscreen + USB |
| Power Input | 110–240 V AC, 50/60 Hz |
| Dimensions (L×H×W) | 710×585×585 mm to 990×930×685 mm |
| Weight | 20–40 kg |
| Compliance | Designed for ISO 3664:2009, ASTM D1729, CIE S 002/E:2012, and GB/T 3978–2008 color evaluation environments |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | High-Power Semiconductor Laser Modules |
| Wavelengths | 808 nm, 88X nm, 915 nm, 940 nm, 976 nm, 980 nm, 1064 nm |
| Output Power (BDL) | Up to 400 W QCW / Up to 200 W CW |
| Output Power (BFP) | Up to 50 W CW / Hundreds of W peak (pulsed) |
| Fiber Interface | SMA 905 (optional: FC, ST, custom patch cable or pigtail) |
| Core Diameter | 100–800 µm |
| NA | 0.15 or 0.22 |
| Spectral Bandwidth (FWHM) | 1–5 nm |
| Center Wavelength Tolerance | ±1–10 nm |
| Operating Temperature | 15–35 °C (extended range optional) |
| Storage Temperature | −20–60 °C |
| Cooling | Conductive (water-cooled option available) |
| Electro-Optical Efficiency | Up to 45% |
| Integrated NTC Thermistor | 10 kΩ @ 25 °C |
| Multi-Wavelength Option | Available (up to 4 wavelengths in one module) |
| Brand | Auniontech |
|---|---|
| Model | BOC-ULTRA |
| Type | Balanced Optical Cross-Correlator (BOC) for Sub-Femtosecond Timing Difference Measurement |
| Origin | Shanghai, China |
| Detector Sensitivity | >5 mV/fs (at detector output, unamplified) |
| Detector Resolution | <0.5 fs |
| Integrated Detector Noise Floor | ≤10 kHz bandwidth |
| Timing Jitter | <15 fs (measured over 35 μHz–1 MHz bandwidth |
| Dimensions (L×W×H) | 300 × 270 × 66 mm |
| Weight | 5 kg |
| Optical Input Wavelength | <2000 nm (customizable per application band) |
| Optical Input Power | 10–50 mW (wavelength- and configuration-dependent) |
| Optical Input Interface | Polarization-Maintaining (PM) fiber with FC/SC connectors (free-space input optional) |
| Pulse Repetition Rate | <10 GHz (application-tuned) |
| Brand | Auniontech |
|---|---|
| Model | BOMPD Series |
| Type | Balanced Optical-Microwave Phase Detector |
| Wavelength Options | 800 ± 30 nm, 1030 ± 30 nm, 1550 ± 40 nm |
| RF Input Power | >15 dBm (up to 10 GHz) |
| Optical Input Power | >20 mW |
| Detector Sensitivity | >0.2 mV/fs (at detector output, unamplified) |
| Integrated Noise Floor (10 kHz BW) | <0.5 fs RMS |
| Residual Timing Jitter (std dev) | <20 fs |
| RF Output Power (RFG option) | >10 dBm, 50 Ω |
| RF Power Stability | <0.1% |
| Dimensions (H×W×L) | 420 × 300 × 171 mm (controller optional for SD/RFG configurations) |
| Weight | 10–20 kg |
| Compliance | Compatible with EPICS & TANGO control frameworks |
| Configurations | MD (Measurement-Only), SD (Synchronization-Driven), RFG (RF Generation) |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Continuous-Wave Tunable Laser |
| Price | Upon Request |
| Output Power | 13 dBm (20 mW) |
| Tuning Range | 100 nm (C-Band, ~1528–1568 nm) |
| Linewidth | <10 kHz (intrinsic) |
| Side-Mode Suppression Ratio (SMSR) | >50 dB |
| Mode-Hop-Free Tuning Step | >0.25 nm |
| Cooling | Integrated Thermoelectric Cooler (TEC) |
| Fiber Pigtail | Polarization-Maintaining (PM) Single-Mode Fiber |
| Brand | Auniontech |
|---|---|
| Origin | France |
| Model | Clarity NLL-1550 |
| Wavelength | 1550 nm |
| Linewidth | <5 kHz (typ. 1–2 kHz) |
| Output Power | 35 mW (up to 80 mW available) |
| Frequency Tuning Range | ±70 MHz |
| Tuning Bandwidth | DC to 1 MHz |
| Wavelength Stability | NIST-traceable atomic reference |
| Form Factor | Compact OEM module or benchtop version |
| Digital I/O | Customizable command set and interface |
| Brand | Auniontech |
|---|---|
| Model | COSMO |
| Input Wavelength | ~1560 nm |
| Input Pulse Energy | >200 pJ |
| Input Fiber | PM1550 |
| Output Connector | SMA |
| Dimensions | ~40 × 25 × 15 mm |
| CEO Signal SNR | >35 dB |
| Application | Optical Frequency Comb Stabilization via f-2f Interferometry |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | UV SHG Cavity |
| Configuration | Fully Customizable Resonant Cavity for Deep-UV Generation |
| Compliance | Designed for GLP/GMP-adjacent research environments |
| Software Interface | External analog/digital I/O for cavity length and temperature feedback control |
| Mechanical Standard | Compatible with 25 mm and 1-inch optical breadboard mounting patterns |
| Thermal Control | Integrated Peltier-based crystal heater with ±0.02 °C stability |
| Alignment Mechanism | External fine-thread micrometers (5 µrad resolution) for mirror and crystal angular adjustment |
| Sealing | Hermetically sealed housing with AR-coated fused silica windows (185–2000 nm transmission) |
| Gas Purge Port | Standard NPT 1/8" fitting for dry N₂ or Ar purge |
| Diagnostic Output | Dedicated 1% transmission tap for intracavity fundamental power monitoring |
| Long-Term Stability | <1% RMS intensity drift over 8-hour continuous operation (verified under lab-grade vibration isolation) |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | CW Mid-IR VCSEL |
| Laser Type | InP-based Buried Tunnel Junction (BTJ) VCSEL |
| Wavelength Range | 1.2–2.4 µm |
| Output Power (QCW) | Up to 8 W (2D array) |
| Single-Mode SMSR | >40 dB |
| Operating Temperature | –40 °C to +90 °C (model-dependent) |
| Threshold Current | Low |
| Power Consumption | 10–20 mW (typical) |
| Beam Profile | Circular, Low Astigmatism |
| Packaging Options | TO-can, fiber-pigtailed, hermetically sealed with AR-coated window |
| Customization | Wavelength, array configuration, drive electronics, and fiber coupling available |
| Brand | Auniontech |
|---|---|
| Model | CW NIR Fiber Laser |
| Type | Continuous-Wave (CW) Single-Mode Polarized Fiber Laser |
| Wavelength Range | 465–1660 nm (standard discrete lines: 976, 1030–1660 nm) |
| Wavelength Accuracy | ±0.5 nm |
| Long-Term Wavelength Stability | ±0.02 nm (8 h) |
| Output Power | 1–50 W (air-cooled), 50–100+ W (water-cooled) |
| Linewidth | < 0.1 nm (typical, FBG-stabilized) |
| Polarization Extinction Ratio | > 20 dB (>99%) |
| Beam Quality | M² < 1.1 (diffraction-limited) |
| Power Stability (8 h) | ±1% RMS |
| Power Tunability | 20–100% of rated output |
| Cooling | Air-cooled (OEM module / 2RU rackmount), Water-cooled (industrial rack cabinet) |
| Fiber Coupling | SM PM fiber (FC/PC, FC/APC, bare fiber options) |
| coupling efficiency | 75–80% |
| Compliance | CE, RoHS, IEC 60825-1 (Class 4 laser product) |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | d-micro Series |
| Wavelength Ranges | 600–1100 nm (USd-micro), 700–1400 nm (Sd-micro & NIRd-micro LP), 1500–1700 nm (NIRd-micro LP) |
| Pulse Duration (Fourier-Limited) | 5–20 fs (USd-micro), 2.5–60 fs (Sd-micro), 80–140 fs (Rd-micro LP), 60–200 fs (NIRd-micro LP) |
| Dispersion Compensation Range | 0 to −4000 fs (USd-micro), −20 to −8000 fs (Sd-micro), −20 to −300,000 fs (Rd-micro LP), −20 to −20,000 fs² (NIRd-micro LP) |
| Repetition Rate Support | ≥1 kHz (with external synchronization option for lower rates) |
| Input Polarization | Linear |
| Max Input Aperture | 20 mm |
| Minimum Input Pulse Energy | >100 pJ @ 80 MHz |
| Compression Module Dimensions (W×L×H) | 317 × 336 × 97 mm (USd-micro), 250 × 250 × 100 mm (Sd-micro) |
| Measuring Head Dimensions (W×L×H) | 57 × 57 × 116 mm |
| Brand | Auniontech |
|---|---|
| Model | d-micro |
| Type | Integrated Dispersion Compensation & Femtosecond Pulse Characterization Module |
| Wavelength Range | 600–1100 nm (d-micro U), 700–1400 nm (d-micro S & d-micro LP NIR), 1500–1700 nm (d-micro LP NIR) |
| Transform-Limited Pulse Width Range | 5–20 fs (U), 2.5–60 fs (S), 80–140 fs (LP), 60–200 fs (LP NIR) |
| Adjustable Second-Order Dispersion Compensation | 0–4,000 fs² (U), 20–8,000 fs² (S), 0–300,000 fs² (LP), 0–20,000 fs² (LP NIR) |
| Repetition Rate Compatibility | ≥1 kHz |
| Input Polarization Requirement | Linear |
| Maximum Input Beam Diameter | 5 mm |
| Minimum Pulse Energy | >100 pJ @ 80 MHz / >1 pJ @ 1 kHz |
| Compressor Module Dimensions (W×L×H) | 300 × 250 × 100 mm |
| Pulse Measurement Head Dimensions | Ø25.4 × 85 mm |
| Origin | Shanghai, China |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Ultrafast Laser Pulse Measurement System |
| Price | Upon Request |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | DAPD-1550 Series |
| Spectral Range | 950–1650 nm |
| Pixel Pitch | 100 µm |
| Active Area per Pixel | 90 × 90 µm² |
| Total Pixels | 25 |
| Photon Detection Efficiency (PDE) @ 1064 nm | 115% |
| Gain (M) | 1 × 10⁵ |
| Excess Noise Factor | < 1.05 |
| Rise Time (10–90%) | < 600 ps |
| Dark Count Rate (per pixel) | 4 MHz |
| Operating Bias Voltage | 50–70 V |
| Recovery Time (per channel, at −35 °C) | 50 ns |
| Package | Hermetic KOVAR with Dual-Stage TEC and Thermistor |
| Operating Junction Temperature | −50 °C |
| Damage Threshold | 0.5 nJ |
| Single-Photon Output Compatibility | 50 Ω RF-coupled, no transimpedance matching required |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | DLIP-200 |
| Core Components | Solid-State Ultrafast Laser-Compatible Interferometric Beam Combining Optics |
| Laser Compatibility | Compatible with ps–fs pulsed lasers (≥1 ps pulse width) |
| Configuration | Fixed-beam and scanning variants available |
| Compliance | Designed for ISO 14644-1 Class 8 cleanroom-optional operation |
| Application Domain | Micro/nano surface structuring for functional surfaces |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Femtum 3400-35 |
| Wavelength Range | 3.0–3.4 µm |
| Spectral Bandwidth (FWHM) | >40 nm |
| Average Power | >100 mW (>500 mW @ 3400 nm) |
| Pulse Energy | >3.5 nJ (>17 nJ @ 3400 nm) |
| Repetition Rate | ~35 MHz (>50 MHz optional) |
| Peak Power | ~1–>50 kW |
| Pulse Duration | <500 fs |
| Beam Diameter | ~3 or 9 mm |
| Beam Quality (M²) | <1.3 |
| Polarization | Elliptical |
| Dimensions (W×H×D) | 48.3 × 14.0 × 52.1 cm |
| Cooling | Air-cooled |
| Input Power | 100/240 V AC, 50/60 Hz |
| Output | Free-space or fiber-coupled |
| Control Interface | Software-driven |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Femtum Ultra 2800 (Research-Grade Mid-IR Femtosecond Laser) |
| Pricing | Available Upon Request |
| Center Wavelength | 2800 ± 20 nm |
| FWHM Bandwidth | 10–30 nm |
| Avg. Power (Std) | 35 mW |
| Avg. Power (Custom) | >100 mW |
| Pulse Width | <600 fs |
| Repetition Rate (Std) | ~35 MHz |
| Repetition Rate (Custom) | 40–100 MHz |
| Pulse Energy (Std) | 1 nJ |
| Pulse Energy (Custom) | >3 nJ |
| Peak Power (Std) | >1 kW |
| Peak Power (Custom) | >5 kW |
| Beam Diameter | <3 mm |
| M² | <1.3 |
| Polarization | Linear |
| Output | Free-space or Fiber-coupled |
| Cooling | Air-cooled |
| Dimensions (W×H×D) | 24 × 5.2 × 17.3 in |
| Control Interface | PC-based GUI or Integrated Touchscreen |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Type | Diode-Pumped Solid-State (DPSS) Laser |
| Wavelength | 213 nm |
| Pulse Width | ≤1.0 ns |
| Repetition Rate | Up to 20 kHz |
| Single-Pulse Energy | 0.05 µJ–2.5 µJ (model-dependent) |
| Peak Power | 0.05–2.5 kW |
| Beam Mode | TEM₀₀ |
| Beam Divergence | < 2.0–3.0 mrad |
| Beam Diameter | 400 ± 200 µm |
| Pulse Energy Stability | < ±5% |
| Output Configuration | Internal/External Triggering |
| Enclosure | Sealed NLO Crystal Capsule |
| Compliance | Designed for laboratory-grade optical metrology and analytical instrumentation environments |
| Brand | Auniontech |
|---|---|
| Wavelength | 257.5 nm |
| Output Power Options | 0.3 W / 0.5 W / 0.7 W / 1.0 W |
| Linewidth | < 0.01 pm |
| Polarization | Vertical, Linear |
| Extinction Ratio | > 100:1 |
| Beam Quality | TEM₀₀, M² < 1.3 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Power Consumption | < 340 W |
| Cooling | Water-cooled |
| Dimensions | 350 × 590 × 124 mm |
| Origin | Shanghai, China |
| Brand | Auniontech |
|---|---|
| Wavelength | 213 nm |
| Output Power | 10–20 mW (CW) |
| Linewidth | < 0.01 pm |
| Polarization | Vertical, Linear |
| Beam Quality | TEM₀₀ |
| Extinction Ratio | > 100:1 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Power Consumption | < 300 W |
| Cooling | Air-cooled |
| Dimensions | 240 × 840 × 160 mm |
| Origin | Shanghai, China |
| Laser Type | Single Longitudinal Mode (SLM), Frequency-Doubled Quadrupled Solid-State Laser |
| Brand | Auniontech |
|---|---|
| Model | FSX Series |
| Laser Type | Solid-State Femtosecond Oscillator & Amplifier System |
| Output Wavelengths | Fixed 1040 nm + Second Output Either Fixed (750–1300 nm, factory-set) or Continuously Tunable (750–1300 nm) |
| Pulse Width | <130 fs |
| Avg. Power | >1 W @ 1040 nm |
| Repetition Rate | 80 MHz |
| Pulse Energy | >12.5 nJ @ 1040 nm |
| Beam Quality | M² < 1.1 (TEM₀₀) |
| Polarization Extinction Ratio | >23 dB |
| Pointing Stability | <30 μrad rms (12 h, constant temp) |
| Cooling | Air-cooled |
| Output | Collimated Free-Space Beam |
| Compliance | CE, RoHS, IEC 60825-1 Class 4 Laser Product |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Type | Domestic |
| Model | High-Power Tunable Narrow-Linewidth Semiconductor Laser |
| Core Components | III-V/Si Hybrid External Cavity Laser Chips, Gain Chips, BOA (Booster Optical Amplifier) Chips, Integrated Resonator-Based Self-Injection Locked Lasers |
| Wavelength Options | O-, S-, C-, L-bands (standard) |
| Output Power | >20 mW (C-band, bare chip) |
| Linewidth | Instantaneous linewidth ~kHz |
| Relative Intensity Noise (RIN) | < −145 dBc/Hz @ 3 MHz–26 GHz |
| Tuning Range | >100 nm @ 1580 nm (gain chip + external cavity) |
| Packaging | COC (Chip-on-Carrier) or packaged modules only (no bare die supplied) |
| Spectral Purity | SMSR > 40 dB |
| Spectral Width (−20 dB) | ≤ 0.1 nm |
| Thermal Wavelength Drift | 0.08 nm/°C |
| Beam Divergence (FWHM) | Fast axis 28°, Slow axis 23° |
| Operating Current (typ.) | 300 mA @ 25°C |
| Threshold Current (typ.) | ≤30 mA |
| Slope Efficiency (typ.) | 0.35 W/A |
| Forward Voltage (typ.) | 1.8 V @ 250 mA |
| Center Wavelength Tolerance | ±0.5 nm @ 50 mW |