Laser Instruments
Filter
Showing 241–270 of 917 results
| Brand | CrystaLaser |
|---|---|
| Wavelengths | 523 nm, 527 nm, 542 nm |
| Output Power | 5–400 mW (model-dependent) |
| Beam Mode | TEM₀₀, M² > 1.1 |
| Linewidth | < 10⁻⁵ nm (SLM), 0.2 nm (basic) |
| Coherence Length | > 300 m (SLM) |
| RMS Noise | < 0.5% (10 Hz–20 MHz), 2% (0–10 kHz) |
| Power Stability | < 2% (8 h), optional < 0.5% or < 0.25% (24 h) |
| Beam Diameter (1/e²) | 0.2 mm |
| Full Beam Divergence | 4 mrad (expandable) |
| Beam Pointing Stability | < 0.02 mrad (isothermal) |
| Polarization Ratio | ≥50:1 (standard), up to >300:1 (optional) |
| Polarization | Linear |
| Brand | CrystaLaser |
|---|---|
| Origin | USA |
| Model Series | CL561, CL555, CL593 |
| Wavelengths | 561 nm, 555 nm, 593 nm |
| Output Power Options | 5–200 mW (model-dependent) |
| Transverse Mode | TEM₀₀, M² < 1.1 |
| Beam Diameter (1/e²) | 0.7 mm (standard) |
| Full-Angle Beam Divergence | 1.1 mrad (reducible with expander) |
| Intensity Noise (RMS) | 2% (10 Hz–10 kHz), ~20% (100 kHz–1 MHz) |
| Power Stability (RMS) | <2% over 8 h |
| ultra-stable variants | 0.5% or 0.25% over 24 h |
| Beam Pointing Stability | <0.02 mrad at constant temperature |
| Polarization | Linear |
| extinction ratio standard 50 | 1, optional >100:1 |
| Brand | CrystaLaser |
|---|---|
| Origin | USA |
| Model Series | CL657, CL660, CL671 |
| Wavelengths | 657 nm, 660 nm, 671 nm |
| Output Power (671 nm) | 25–300 mW |
| Output Power (657/660 nm) | 50–300 mW |
| Longitudinal Mode | Single-Longitudinal-Mode (SLM) or Multimode |
| Spectral Linewidth (SLM) | < 10⁻⁵ nm |
| Spectral Linewidth (Basic) | < 0.15 nm (nominal) |
| RMS Intensity Noise | < 0.5% (10 Hz – 20 MHz, SLM) |
| RMS Intensity Noise | 2% (10 Hz – 10 kHz), >20% (100 kHz – 1 MHz, Basic) |
| Coherence Length (SLM) | > 300 m |
| Transverse Mode | TEM₀₀, M² < 1.1 |
| Beam Diameter (1/e²) | 0.2 mm (standard) |
| Full-Angle Beam Divergence | 4 mrad (reducible with expander) |
| Power Stability (rms) | < 2% over 8 h |
| optional ultra-stable | 0.5% or 0.25% over 24 h |
| Beam Pointing Stability | < 0.02 mrad (at constant temperature) |
| Polarization | Linear |
| extinction ratio 50 | 1 standard, >100:1 optional |
| Brand | CrystaLaser |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Models | CL946, CL1030, CL1047, CL1053, CL1064, CL1080, CL1122, CL1313, CL1319, CL1342 |
| Output Power Options | 25 mW – 4 W (model- and wavelength-dependent) |
| Beam Diameter (1/e²) | 0.3–0.5 mm |
| Beam Divergence (full angle) | 3–5 mrad |
| Transverse Mode | TEM₀₀, M² < 1.1 |
| RMS Intensity Noise | < 0.5% (10 Hz – 20 MHz) |
| Linewidth | < 1×10⁻⁵ nm (SLM version) |
| Coherence Length | > 300 m (SLM version) |
| Power Stability (rms) | < 2% over 8 h |
| optional ultra-stable | ≤ 0.5% or ≤ 0.25% over 24 h |
| Beam Pointing Stability | < 0.02 mrad (temperature-stabilized environment) |
| Polarization | Linear, extinction ratio ≥ 100:1 (≥ 300:1 optional) |
| Brand | CrystaLaser |
|---|---|
| Origin | USA |
| Model Series | DL375, DL405, DL445 |
| Wavelengths | 375 nm (±5 nm), 405 nm (±5 nm), 445 nm (±5 nm) |
| Output Power Options | 375 nm — up to 30 mW |
| Beam Diameter (1/e²) | 1.2 mm (DL375/DL405), 1.2–2.5 mm (DL445) |
| Full-Angle Beam Divergence | 0.6 mrad (DL375/DL405), 0.7–1.2 mrad (DL445) |
| Transverse Mode | TEM₀₀ (M² ≈ 1.2, DL375) |
| Longitudinal Mode | Single Longitudinal Mode (SLM, DL375) |
| Spectral Linewidth | < 10⁻⁵ nm (DL375 SLM), 0.8 nm (DL405), ~1 nm (DL445) |
| Coherence Length | > 50 m (DL375 SLM), not specified (DL405/DL445) |
| Intensity Noise (RMS, 10 Hz–50 MHz) | < 1% (DL375/DL445), < 0.5% (DL405 low-noise variant) |
| Power Stability (RMS) | 1% over 8 h |
| optional ultra-stable versions | 0.5% or 0.25% over 24 h |
| Beam Pointing Stability | < 0.02 mrad (temperature-stabilized environment) |
| Polarization | Linear, extinction ratio ≥ 100:1, vertical orientation |
| Brand | CrystaLaser |
|---|---|
| Wavelengths | 473 nm, 488 nm |
| Output Power Options | 5–150 mW (473 nm) |
| Beam Diameter (1/e²) | 0.7–1.2 mm |
| Beam Divergence (Full Angle) | 0.7–1.0 mrad |
| Transverse Mode | TEM₀₀ (M² < 1.2) to Circular (M² ≈ 1.2) |
| Longitudinal Mode | Single Longitudinal Mode (SLM) or Multimode |
| Spectral Linewidth | < 0.00001 nm (SLM), ≤ 1 nm (nominal) |
| Coherence Length | > 100 m (SLM) |
| RMS Intensity Noise | < 1% (10 Hz–50 MHz), up to 30% at 300 kHz (Low-Noise Options Available) |
| Power Stability | < 2% rms over 8 h |
| optional ultra-stable | 0.25% rms over 24 h |
| Beam Pointing Stability | < 0.02 mrad (constant temperature) |
| Polarization | Linear, extinction ratio ≥ 100:1 (vertical), optional ≥ 300:1 |
| Brand | CrystaLaser |
|---|---|
| Wavelengths | 532 nm, 527 nm, 523 nm, 555 nm, 561 nm |
| Max. Avg. Power (at optimal rep rate) | 1000 mW |
| Max. Pulse Energy (at 1 kHz) | 0.20–0.35 mJ |
| Avg. Power Options | 1 W, 500 mW, 200 mW, 100 mW, 50 mW |
| Pulse Width | 7–100 ns (typ. 10–25 ns) |
| Repetition Rate | 1–100 kHz (internal), 0–400 kHz (external trigger) |
| Beam Diameter (1/e²) | 0.3 mm |
| Beam Divergence (full angle) | 3–4 mrad |
| Transverse Mode | TEM₀₀, M² < 1.2 (typ. < 1.1) |
| Longitudinal Mode | Single longitudinal mode (coherence length option available) |
| Power Stability (rms) | ≤3% after warm-up |
| Beam Pointing Stability | < 0.02 mrad (constant temperature) |
| Polarization | Linear, extinction ratio ≥100:1 |
| Brand | CrystaLaser |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Instrument |
| Model Numbers | QL1064, QL1053, QL1047, QL946, QL1122, QL1313, QL1319, QL1338, QL1342, QL1444 |
| Max. Avg. Power | 2000 mW (model-dependent) |
| Max. Pulse Energy (at 1 kHz) | 0.60 mJ |
| Avg. Power Options | 100–2000 mW (custom higher powers available) |
| Pulse Width | 7–100 ns (typ. 15–30 ns) |
| Repetition Rate | 1–100 kHz (internally adjustable) |
| Transverse Mode | TEM₀₀, M² < 1.2 (typ. < 1.1) |
| Beam Diameter (1/e²) | 0.5 mm |
| Beam Divergence (full angle) | 3–4 mrad |
| Longitudinal Mode | Single longitudinal mode (coherence length option available) |
| Power Stability (rms) | ≤3% after thermal stabilization |
| Beam Pointing Stability | < 0.02 mrad (isothermal conditions) |
| Polarization | Linear, extinction ratio ≥100:1 |
| Brand | CrystaLaser |
|---|---|
| Origin | USA |
| Model Variants | QL355, QL351, QL262 |
| Wavelengths | 355 nm, 351 nm, 349 nm, 266 nm, 262 nm |
| Max. Avg. Power (optimal rep rate) | 100 mW (355/351/349 nm), 50 mW (266/262 nm) |
| Max. Pulse Energy @ 1 kHz | 25 µJ (355/262 nm), 50 µJ (351/349 nm), 15 µJ (266 nm) |
| Pulse Width | 5–100 ns (typ. 10–15 ns) |
| Repetition Rate | 1–100 kHz (internal), up to 400 kHz (external trigger) |
| Beam Divergence (full angle) | 2–6 mrad |
| Beam Diameter (1/e²) | 0.15 × 0.3 mm (elliptical at 262/266 nm), 0.2 mm (circular at 349–355 nm) |
| Transverse Mode | TEM₀₀, M² < 1.3 (typically < 1.1 for 349–355 nm) |
| Longitudinal Mode | Multi-longitudinal |
| Power Stability (rms) | ≤5% after thermal equilibrium |
| Beam Pointing Stability | < 0.02 mrad (constant temperature) |
| Polarization | Linear, >100:1 extinction ratio |
| Brand | CrystaLaser |
|---|---|
| Wavelengths | 440 nm, 447 nm, 473 nm |
| Max. Avg. Power (at optimal rep. rate) | 50 mW |
| Pulse Energy (at 10 kHz) | 5 µJ |
| Avg. Power Options | 10 mW, 25 mW, 50 mW |
| Pulse Width | 7–100 ns (typ. 15–35 ns) |
| Repetition Rate | 1–100 kHz (internal), 0–200 kHz (external trigger) |
| Transverse Mode | TEM₀₀, M² < 1.2 (typ. < 1.1) |
| Beam Diameter (1/e²) | 0.2 mm |
| Beam Divergence (full angle) | 3–4 mrad |
| Power Stability (rms) | ≤5% after warm-up |
| Beam Pointing Stability | < 0.02 mrad (constant temperature) |
| Polarization | Linear, >100:1 ratio |
| Coherence | Narrow linewidth with long coherence length option available |
| Brand | CrystaLaser |
|---|---|
| Wavelengths | 657 nm, 660 nm, 671 nm |
| Max. Avg. Power (at optimal rep. rate) | 200 mW, 500 mW, 500 mW |
| Pulse Energy (at 10 kHz) | 20 µJ, 0.50 µJ, 0.50 µJ |
| Avg. Power Options | 100–500 mW |
| Pulse Width | 10–100 ns (typ. 20–40 ns) |
| Repetition Rate | 1–100 kHz (internal), up to 200 kHz (external trigger) |
| Transverse Mode | TEM₀₀, M² < 1.2 (typ. < 1.1) |
| Beam Diameter (1/e²) | 0.3 mm |
| Beam Divergence (full angle) | 3–4 mrad |
| Linewidth & Coherence | Narrow linewidth with optional long-coherence configuration |
| Power Stability (rms) | ≤3% after thermal stabilization |
| Beam Pointing Stability | < 0.02 mrad (constant temperature) |
| Polarization | Linear, >100:1 extinction ratio |
| [Brand | Cutting Edge Optronics (CEO) |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Cooling Options | Conductive Cooling, Water Cooling, Microchannel Cooling |
| Core Components | Semiconductor Laser Diode Bars and Packaged Modules |
| Wavelength Range | 790–1550 nm (Standard Bands: 780–815 nm, 875–890 nm, 935–945 nm, 965–975 nm) |
| CW Output Power | Up to 100 W/bar (60–600 W/module, depending on configuration) |
| QCW Output Power | Up to 300 W/bar (up to 29 kW total system-level output) |
| Packaging Formats | G-Series, Cs-Series, Derringer, Shooter, E2, A-Series, HDS Arrays |
| Compliance | Designed for MIL-STD-810G, RoHS-compliant materials, hermetic sealing per MIL-STD-883 Method 1014] |
| Brand | CEO |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | eDrive, eDrive Nitro |
| Key Components | Solid-State Laser Systems & Driver Electronics |
| Operating Modes | CW & QCW |
| Voltage Range | 0–350 V |
| Max. CW Current | 70 A (eDrive), 50 A (eDrive Nitro) |
| Max. QCW Current | 300 A (both, ≤7% duty cycle, water-cooled) |
| Pulse Frequency | Up to 50 kHz |
| Pulse Width | 100 µs – 100 ms |
| Transition Time | Typical 5 µs (100 A), 40 µs (100 A) |
| Cooling Options | Air-cooled or Water-cooled |
| Interface | RS232, RS485, LabVIEW-compatible |
| Compliance | CE-marked versions available |
| Mounting | 19-inch rack-mountable |
| Safety | Integrated interlock circuitry, thermal monitoring, and fail-safe shutdown |
| Brand | CVI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 35 LAP321 |
| Laser Type | Gas Laser (Argon-Ion) |
| Wavelength Range | 454–520 nm (discrete lines), including 457, 465, 472, 476, 488, 496, 502, and 514 nm |
| Output Mode | TEM₀₀ |
| Max Single-Line Power | 120 mW @ 488 nm |
| Beam Diameter | ~0.65 mm (1/e²) |
| Beam Divergence | <1.5 mrad |
| Cooling Method | Air-Cooled |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 (Laser Product Safety) |
| Brand | CVI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 35LAS450 |
| Core Technology | Gas Laser System |
| Wavelength | 488 nm |
| Output Power | 50 mW |
| Gain Medium | Ar⁺ (Argon Ion) |
| Beam Mode | TEM₀₀ |
| Cooling Method | Forced-Air |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 |
| Brand | Cycle |
|---|---|
| Origin | Hamburg, Germany |
| Core Wavelength | 1550 nm (optional dual output at 1550 nm / 775 nm) |
| Pulse Energy | up to 4.5 µJ @ 1550 nm |
| Average Power | 4.5 W @ 1550 nm |
| Repetition Rate | 1–30 MHz (factory-set, fixed per unit) |
| Pulse Duration | <350 fs (transform-limited, typical @ 1550 nm) |
| Peak Power | 50 MW @ 1 MHz |
| Spectral Bandwidth | τₚ·Δνₚ ≈ 0.35 |
| Beam Quality | M² < 1.5, TEM₀₀ |
| Polarization Extinction Ratio | >20 dB |
| Output | Collimated free-space beam (beam height: 99.5 mm) |
| Laser Head Dimensions | 905 × 605 × 177 mm³ |
| Laser Head Weight | ~15 kg |
| Controller | 19″/3HU rack-mount |
| Power Supply | 100–240 VAC, 50–60 Hz, <300 W |
| Brand | ALPhANOV |
|---|---|
| Origin | France |
| Model | D-LMS |
| Type | Dual-Beam Laser Microscopy Platform |
| Application | Optical Fault Injection (OFI), Side-Channel Analysis Support, Semiconductor IC Security Testing |
| Core Components | Integrated Semiconductor Laser Sources (Wavelengths Configurable, Typically 1064 nm & 532 nm), High-NA Microscope Objective, Precision XYZ Nanopositioning Stage, Synchronized Pulse Control Unit, Beam Steering & Focusing Optics |
| Brand | DAYY Photonics |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | ECL-4500 Series |
| Tuning Range | Standard 45–200 nm, Extended up to 500 nm |
| Spectral Linewidth (FWHM) | ~0.5 nm @ 1550 nm |
| Output Power | >10 mW per wavelength |
| Simultaneous Wavelengths | Up to 4 |
| Tuning Speed | kHz-rate continuous electronic tuning |
| Tuning Mechanism | Solid-state, no moving parts, voltage-controlled |
| Fiber Coupling | Polarization-maintaining (PM), single-mode (SM), or free-space options |
| Interfaces | USB, RS-232, Ethernet |
| Software | GUI + Python/C++ API for automated test systems |
| Brand | Del Mar Photonics |
|---|---|
| Origin | USA |
| Model | Trestles-20 |
| Pulse Width | 20–100 fs |
| Tuning Range | 700–960 nm |
| Output Power @ 800 nm | 150–1500 mW |
| Spatial Mode | TEM₀₀ |
| Pump Power | 3–10 W |
| Pulse Energy | 1–15 nJ |
| Repetition Rate | 93–100 MHz |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | DD-## |
| Pricing | Available Upon Request |
| Brand | FLC |
|---|---|
| Origin | USA |
| Type | Distributed Feedback (DFB) and Distributed Bragg Reflector (DBR) Semiconductor Laser Diodes |
| Wavelength Range | 689–3400 nm |
| Output Power | 1–150 mW |
| Package Options | TO-can, Butterfly, and Fiber-Pigtailed Modules |
| Operating Temperature Range | −40 °C to +85 °C |
| Spectral Linewidth | < 3 MHz (typ.) |
| Side Mode Suppression Ratio (SMSR) | > 50 dB |
| Tuning Capability | Current- and Temperature-Tunable |
| Compliance | RoHS, CE, ISO 9001 Certified Manufacturing |
| Brand | DFM |
|---|---|
| Origin | Denmark |
| Model | Stabiλaser 1542ε, Stabiλaser 771 |
| Wavelength (vacuum) | 1542.3837 nm |
| Linewidth (short-term) | 300 Hz |
| Allan Deviation (ADEV ≥ 1 s) | ≤3×10⁻¹³ |
| Long-term accuracy | ≤2×10⁻¹² (annual drift) |
| Output power (locked) | 10 mW @ 1542 nm |
| Power supply | 100–240 VAC, 50/60 Hz |
| Dimensions | 13.3 cm × 48.3 cm × 49.6 cm |
| Compliance | CIPM-recommended frequency standard (uncertainty: 5 kHz) |
| Brand | DPSS Lasers |
|---|---|
| Origin | USA |
| Model | TCW Series |
| Wavelength | 354.7 nm |
| Output Power Options | 10–200 mW (TCW50/TCW100/TCW150/TCW200) |
| Beam Mode | TEM₀₀ (M² < 1.3) |
| Beam Diameter (1/e²) | 1.2 mm |
| Beam Divergence (full angle) | < 0.3 mrad |
| Beam Pointing Stability | < 25 µrad |
| Polarization Ratio | > 100:1 |
| Ellipticity | < 10% |
| Astigmatism | < 0.3 |
| Optical Noise (P-P, 0–2 MHz) | < 10% |
| Optical Noise (RMS) | < 1% |
| Power Stability (8 hrs) | < 5% |
| Warm-up Time | < 1 hour |
| Input Voltage | 90–240 VAC |
| Power Consumption | < 1000 W |
| Operating Temperature | 10–30 °C |
| Laser Head Dimensions (L×W×H) | 521 × 254 × 129 mm³ |
| Laser Head Weight | 15.9 kg |
| Power Supply Dimensions | 330 × 455 × 137 mm³ |
| Power Supply Weight | 10.5 kg |
| Chiller Dimensions | 287 × 224 × 389 mm³ |
| Chiller Weight (dry) | 9.1 kg |
| Cooling | Active liquid cooling |
| Laser Type | Diode-pumped solid-state (DPSS), frequency-tripled Nd:YVO₄ |
| Brand | DPSS Lasers |
|---|---|
| Origin | USA |
| Type | Diode-Pumped Solid-State (DPSS) Pulsed UV Laser |
| Wavelength | 354.7 nm |
| Average Power Range | 100 mW – 5 W |
| Pulse Width | <30–80 ns |
| Repetition Rate | 30–150 kHz |
| Pulse Energy | 1–166 µJ |
| Beam Mode | TEM₀₀ (M² < 1.3) |
| Beam Diameter (1/e²) | 1.5–2.0 mm |
| Beam Divergence (full angle) | <0.3–0.6 mrad |
| Polarization Ratio | >100:1 (linear, horizontal) |
| Pulse-to-Pulse Stability | <10–15% RMS |
| 8-hr Power Stability | <5% |
| Beam Pointing Stability | <50 µrad |
| Cooling | Integrated Chiller System |
| Input Voltage | 90–240 VAC |
| Max. Power Consumption | 500–900 W |
| Operating Temperature | 10–35 °C |
| Laser Head Weight | 15.9 kg |
| Origin | Israel |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Duma AngleMeter |
| Price Range | USD 1,400–7,200 (based on configuration) |
| Core Component | Semiconductor Laser-Based Measurement System |
| Spectral Range | 350–1100 nm |
| Angular Deviation Accuracy | ±0.5% of reading |
| Power Measurement Accuracy | ±5% |
| Sensor Options | PSD4 (4×4 mm), PSD9 (9×9 mm), CMOS USB2, with HR (High-Resolution) and Analog/USB interfaces |
| Lens Options | 50 mm f/1.8, 85 mm f/1.8, 100 mm f/4, 200 mm f/5.6 |
| Origin | Israel |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | BA Series |
| Detector Options | Si (350–1100 nm), UV-enhanced Si (190–1100 nm), InGaAs (800–1800 nm, 1200–2700 nm) |
| Blade Configurations | 3-blade or 7-blade scanning slit architecture |
| Detector Apertures | 5 mm circular (Si/UV), 9 mm square (Si/UV), 3 mm or 5 mm circular (InGaAs) |
| Interface | USB 2.0 |
| Software | BeamGage-compatible CD-based analysis suite |
| Compliance | Designed for ISO 11146-1:2005 and ISO 13694-compliant beam parameter extraction |
| Brand | Duma Optronics |
|---|---|
| Origin | Israel |
| Model | BA7-IR |
| Detection Principle | Rotating Knife-Edge Method |
| Wavelength Range | 800–1800 nm |
| Aperture | 5 mm |
| Blade Count | 7 |
| Interface | PCI |
| Software Included | BeamAnalyzer™ v6.x |
| Compliance | ISO 11146-1:2005, ISO 13694:2000, ANSI Z136.1-2022 |
| Measurement Accuracy | < ±1% (relative, calibrated), Resolution: < 1 µm (spatial), Dynamic Range: > 6 decades (intensity) |
| Brand | Duma Optronics |
|---|---|
| Origin | Israel |
| Model | BA7-IR3 |
| Spectral Range | 190–1800 nm |
| Beam Size Range | 3 µm – 9 mm |
| Spatial Resolution | 0.1 µm |
| A/D Resolution | 12-bit |
| Interface | USB 2.0, RS232, TCP/IP |
| Measurement Principle | Multi-angle scanning knife-edge with tomographic reconstruction |
| Compliance | CE, RoHS |
| Software | BeamGage Pro (Windows), SDK included |
| Key | Brand: Duma Optronics |
|---|---|
| Origin | Israel |
| Detector Type | Silicon (Si) |
| Aperture Shape | Square |
| Aperture Size | 9 mm × 9 mm |
| Spectral Range | 190–1990 nm |
| Beam Size Measurement Range | 3 µm – 9 mm |
| Spatial Resolution | 0.1 µm |
| A/D Resolution | 12-bit |
| Interface | USB 2.0 |
| Blade Count | 7 |
| Compliance | CE, RoHS |
| Software | BeamGage®-compatible SDK, ActiveX, TCP/IP, RS-232 |
| Brand | Duma Optronics |
|---|---|
| Origin | Israel |
| Model | Beam On WSR |
| Spectral Range | 190–1600 nm |
| Detector Type | WSR (Wide Spectral Response) CMOS Sensor |
| Active Area | 6.47 mm × 4.83 mm |
| Pixel Size | 8.6 µm (H) × 8.3 µm (V) |
| Resolution | 752 × 582 pixels |
| Interface | USB 2.0 |
| Max Frame Rate | 25 Hz (standard mode) |
| Shutter Speed | 1/50×256 s to 1/100,000 s |
| Gain | 6–41 dB |
| Sensitivity | ~160 µW/cm² @ 1550 nm (with ×256 shutter) |
| Saturation Power Density | ~1 mW/cm² @ 633 nm (no attenuation) |
| Damage Threshold | 50 W/cm² / 1 J/cm² (with full filter set) |
| Operating Temperature | −10 °C to +50 °C (non-condensing) |
| Dimensions | 80 mm × 78.5 mm × 49 mm |
| Weight | ~400 g (including cable) |
| Power Supply | 5 V, 0.6 A (USB 2.0 powered) |