Laser Instruments
Filter
Showing 841–870 of 984 results
| Brand | RealLight |
|---|---|
| Origin | Beijing, China |
| Model | MCJ Series |
| Wavelengths | 1030 nm / 515 nm / 343 nm / 257 nm |
| Pulse Width | ≤800 ps (typ.) |
| Repetition Rate | up to 2 kHz |
| Pulse Energy | up to 100 µJ |
| Average Power | up to 100 mW |
| Beam Mode | TEM₀₀ |
| Beam Divergence (full angle, 1/e²) | ≤6 mrad (horizontal), ≤6 mrad (vertical) |
| Polarization Ratio | >100:1 |
| Power Stability (8 h) | ±3% |
| Trigger Interface | TTL 5 V, SMA |
| Power Input | 100–240 VAC, 50/60 Hz |
| Control Interface | RS232, USB |
| System Power Consumption | ≤15 W |
| Laser Head Dimensions (W×H×L) | 45 × 30 × 120 mm |
| Power Supply Dimensions (W×H×L) | 168 × 88 × 140 mm |
| Operating Temperature | 15–35 °C |
| Storage Temperature | 0–60 °C |
| Integrated Sealed Module | Yes |
| Optional Built-in Beam Expander | Available (divergence <2 mrad) |
| Brand | RealLight |
|---|---|
| Origin | Beijing, China |
| Model(s) | MCM, MCO |
| Output Configuration | Free-space (MCO) or Fiber-coupled (MCO-F) |
| Wavelength Range | 266–1064 nm |
| Repetition Rate | 10–200 Hz |
| Pulse Energy | >10 mJ (MCM @ 1064 nm) |
| Pulse Width | <3 ns (MCM) |
| Laser Type | Diode-pumped solid-state (DPSS) microchip laser |
| Cooling | Conductive / Forced-air (model-dependent) |
| Compliance | CE-marked per EN 60825-1:2014 (Class 4 laser product) |
| Control Interface | RS232 / USB / Analog TTL sync |
| Brand | RealLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MCM |
| Core Components | Semiconductor Pump Laser Module + Monolithic Nd:YAG/Cr:YAG Passive Q-Switched Solid-State Laser |
| Wavelength | 1064 nm |
| Repetition Rate | 10 Hz |
| Pulse Energy | >10 mJ |
| Pulse Width | <3 ns |
| Beam Divergence (Full Angle, 1/e²) | 3 mrad (Horizontal) / 3 mrad (Vertical) |
| Power Stability (RMS) | <3% |
| Cooling Method | Air-Cooled |
| Laser Head Dimensions (W×H×L) | 17 × 16.1 × 58.5 mm |
| Operating Temperature | 15–35 °C |
| Storage Temperature | −20–60 °C |
| Electrical Input | 12 VDC |
| Control Interface | RS-232 + TTL I/O |
| Max System Power Consumption | 15 W |
| Driver Board Dimensions (W×H×L) | 45 × 39.6 × 110.3 mm |
| Trigger Mode | Internal or External |
| Brand | RealLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MCO Fiber-Coupled |
| Core Components | Semiconductor Laser Systems & Integrated Microchip Laser Modules |
| Wavelengths | 1064 / 532 / 355 / 266 nm |
| Repetition Rate | 1–200 Hz (16–200 Hz in Continuous & Burst Modes) |
| Pulse Width | ≤1 ns |
| Max. Fiber-Coupled Pulse Energy | 50 µJ @ 1064 nm, 25 µJ @ 532/355 nm, 10 µJ @ 266 nm |
| Energy Stability (RMS) | ≤3% |
| Energy Tuning Step Accuracy | ≤2% |
| Polarization Ratio | ≥100:1 |
| Fiber Output | 200 µm core / 0.22 NA |
| Power Input | 24 V DC (90–260 V AC adapter included) |
| Peak Power Consumption | <20 W |
| Average Power Consumption | <10 W |
| Dimensions (W×H×L) | 82 × 79 × 250 mm |
| Operating Temperature | 15–35 °C |
| Storage Temperature | −10–60 °C |
| Trigger Jitter | <100 ps (Optical Sync Output) |
| Control Interface | RS-232 |
| Modulation Input | TTL 0–5 V via SMB connector |
| Enclosure | Fully Sealed, Industrial-Grade Housing |
| Brand | RealLight |
|---|---|
| Origin | Beijing, China |
| Model | MCO Spatial-Output |
| Wavelengths (nm) | 1064 / 532 / 355 / 266 |
| Repetition Rate | 1–200 Hz |
| Max. Pulse Energy (spatial output) | 60 µJ @ 1064 nm, 30 µJ @ 532 nm, 25 µJ @ 355 nm, 15 µJ @ 266 nm |
| Pulse Width | ≤1 ns |
| Beam Divergence (full angle, 1/e²) | ≤2 mrad (horizontal & vertical) |
| Polarization Ratio | ≥100:1 |
| Beam Mode | TEM₀₀ |
| Energy Stability (RMS) | ≤3% |
| Energy Tuning Step Accuracy | ≤2% |
| Trigger Jitter (optical trigger) | <100 ps |
| Power Supply | 24 V DC |
| Input Voltage Range (adapter included) | 90–260 V AC |
| Peak Power Consumption | <20 W |
| Average Power Consumption | <10 W |
| Dimensions (W×H×L) | 82 × 102.8 × 240 mm |
| Operating Temperature | 15–35 °C |
| Storage Temperature | 0–60 °C |
| Control Interface | RS-232 |
| Modulation Input | TTL 0–5 V, SMB connector |
| Enclosure | Fully sealed, industrial-grade housing |
| Brand | Hengjiu |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Reef-RT |
| Price | Upon Request |
| Wavelength Range | 700–1000 nm & 1000–1400 nm |
| Pulse Width Range | 20–200 fs & 200–2000 fs |
| Input Pulse Energy | >500 nJ (1–10 Hz) & >50 nJ (>1 kHz) |
| Repetition Rate | 1–10 Hz (single-shot mode) & >10 Hz (multi-shot mode) |
| Input Polarization | Linear, Horizontal or Vertical |
| Brand | REO (Research Electro-Optics) |
|---|---|
| Origin | USA |
| Type | Gas Laser System |
| Wavelength | 633 nm |
| Output Power Range | 0.5–35 mW |
| Polarization | Linear (>500:1) or Unpolarized |
| Beam Mode | TEM₀₀ |
| Power Rise Time | ≤3 s to 75% of rated output |
| Beam Diameter | 0.57–1.22 mm |
| Beam Divergence | 0.66–1.41 mrad |
| Longitudinal Mode Spacing | 163–1082 MHz |
| Frequency Stability (Stabilized Models) | ±1 MHz (1 hr), ±2 MHz (8 hr) |
| Power Stability (Stabilized Models) | ±0.1% (1 min), ±0.2% (1 hr) |
| Orthogonal Polarization Option | Dual-output, orthogonal linear polarization (Δθ = 90°, >500:1 extinction ratio) |
| Optional Wavelengths | 543 nm, 594 nm, 604 nm, 612 nm, 1.15 µm, 1.52 µm, 3.39 µm, dual-wavelength (e.g., 633/1.52 µm) |
| Brand | Resolution Spectra Systems |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SpectraResolver |
| Core Hardware Integration | SWIFTS-based laser spectrometers (Zoom Spectra & Micro Spectra platforms) |
| Supported Light Sources | Semiconductor laser diodes and multi-mode laser systems |
| Calibration Reference | Temperature-stabilized internal reference for absolute wavelength accuracy |
| Wavelength Accuracy | Sub-picometer (pm) level for multi-mode lasers under controlled thermal conditions |
| Data Acquisition Modes | High-frame-rate burst capture and low-frame-rate long-term monitoring |
| Native Data Compatibility | Zoom Spectra and Micro Spectra spectral acquisition units |
| Brand | Hengjiu |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Rincon |
| Wavelength Range | 700–1500 nm |
| Dynamic Range | 10⁸ (10⁴ in measurement window) |
| Temporal Scan Range | 950 ps |
| Input Pulse Energy | < 500 µJ (for 40–50 fs pulses) |
| Minimum Pulse Width | > 20 fs |
| Repetition Rate | < 100 Hz |
| Input Polarization | Linear, Horizontal |
| Temporal Resolution | 150 fs (2 ps time window), 400 fs (12 ps time window) |
| Power Supply | 220 V, 50/60 Hz ±10% |
| Brand | TEO |
|---|---|
| Origin | Israel |
| Model | RTP |
| Type | Electro-Optic Q-Switch & Phase/Amplitude Modulator |
| Operating Temperature Range | −50 °C to +70 °C |
| Crystal Structure | Rhombohedral (Space Group R3c) |
| Electro-Optic Coefficient | r₄₁ ≈ 11.8 pm/V (at 1064 nm) |
| Half-Wave Voltage (Vπ) | < 3.5 kV (for standard 25 mm aperture, λ = 1064 nm) |
| Laser Damage Threshold | > 1 GW/cm² (10 ns, 1064 nm, 10 Hz) |
| Insertion Loss | < 0.2 dB per surface (AR-coated, 1064 nm) |
| Extinction Ratio | > 30 dB (with precision bias control) |
| Hygroscopicity | Non-hygroscopic |
| Ringing Effect | Negligible (τ < 1 ns step response) |
| Brand | UpTek |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sabray |
| Core Component | Industrial-grade Solid-State Femtosecond Laser System |
| Motion Platform | Granite龙门 gantry structure, 600 mm travel range, <10 nm positioning resolution |
| Optional Modules | Galvo scanning head, long-working-distance microscope objective, helical drilling module, vacuum sample chamber |
| Brand | Sacher Lasertechnik |
|---|---|
| Origin | Germany |
| Model | TEC-520-1550 |
| Wavelength | 1550 nm |
| Tuning Range | Mode-hop-free over >35 GHz (typ.) |
| Linewidth | <100 kHz (1 ms) |
| Output Power | Up to 100 mW |
| Output Options | Free-space and fiber-coupled variants available |
| Control Interfaces | GPIB, RS232, USB |
| Cavity Type | Littman-Metcalf external cavity diode laser (ECDL) |
| Brand | Coherent |
|---|---|
| Origin | USA |
| Model | Sapphire FP Series |
| Wavelength | 488 nm |
| Output Type | Fiber-Coupled (FC/PC or FC/APC optional) |
| Laser Medium | Solid-State (Diode-Pumped Nd:YAG / LBO frequency-doubled) |
| Cooling | Air-Cooled |
| Polarization | Linear, >100:1 |
| Power Stability | <±0.5% RMS over 8 hours |
| Beam Pointing Stability | <5 µrad/°C |
| Lifetime | >10,000 hours MTBF |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 (Laser Product Safety) |
| Brand | Scientech |
|---|---|
| Origin | USA |
| Product Type | Imported Laser Power/Energy Measurement Instruments |
| Detector Types | Photodiode, Surface-Absorbing Calorimeter, Volume-Absorbing Calorimeter |
| Wavelength Range | 0.193–26 µm |
| Power Range | 100 nW–30 W (continuous) |
| Energy Range | 10 µJ–1000 J (pulsed) |
| Aperture Diameter | 8–200 mm |
| Compliance | NIST-traceable calibration available |
| Software Interface | USB/RS-232 with PC-based data acquisition and analysis suite |
| Regulatory Alignment | Designed for use in environments requiring GLP/GMP documentation support and FDA 21 CFR Part 11–compatible audit trails (when paired with compliant software) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Senza® 1064nm |
| Pricing | Available Upon Request |
| Wavelength | 1064 nm |
| Output Power (CW) | 500 mW & 1000 mW |
| Beam Diameter | 0.7 mm (±0.2 mm) @ 10 mm from aperture (1/e²) |
| Spatial Mode | TEM₀₀, M² < 1.05 |
| Beam Divergence | < 1 mrad (half-angle) |
| Beam Pointing Stability | ≤ 10 μrad / °C |
| Longitudinal Mode | Single Longitudinal Mode (SLM) |
| Spectral Linewidth | < 2 MHz |
| Polarization | Vertical |
| Polarization Extinction Ratio | ≥ 100 : 1 |
| Intensity Noise (p-p) | ≤ 2 % (10 Hz – 2 MHz) |
| Intensity Noise (rms) | ≤ 0.3 % (10 Hz – 2 MHz) |
| Power Stability | ≤ 2 % over 4 hours |
| Operating Temperature | 15 – 35 °C |
| Storage Temperature | 10 – 50 °C |
| Laser Head Dimensions (L×W×H) | 170 × 139 × 96 mm |
| Laser Head Weight | 2540 g |
| Power Supply Dimensions (L×W×H) | 175 × 104 × 45 mm |
| Power Supply Weight | 740 g |
| Wavelength | 1064 nm |
|---|---|
| Output Power (CW) | 2000 mW (standard), custom options >2000 mW |
| Beam Diameter | 0.7 mm ±0.2 mm @ 10 mm (1/e²) |
| Beam Mode | TEM₀₀, M² < 1.05 |
| Beam Divergence | <1 mrad (half-angle) |
| Beam Pointing Stability | ≤10 μrad / °C |
| Longitudinal Mode | Single Longitudinal Mode (SLM), Linewidth <2 MHz |
| Polarization | Vertical, Extinction Ratio ≥100:1 |
| Intensity Noise (p-p) | ≤2% (10 Hz–2 MHz) |
| Intensity Noise (rms) | ≤0.3% (10 Hz–2 MHz) |
| Power Stability | ≤2% over 4 hours |
| Operating Temperature | 15–35 °C |
| Storage Temperature | 10–50 °C |
| Laser Head Dimensions | 186 × 139 × 96 mm |
| Laser Head Weight | 2540 g |
| Power Supply Dimensions | 225 × 246 × 110 mm |
| Power Supply Weight | 2960 g |
| Brand | Servomex |
|---|---|
| Origin | United Kingdom |
| Model | Laser 2900 |
| Measurement Principle | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Optical Path Length | 0.5–15 m |
| Response Time | <2 s |
| Zero Drift | <2% FS/6 months |
| Span Drift | <4% FS/6 months |
| Analog Outputs | Dual isolated 4–20 mA loops (500 Ω max each) |
| Digital Interfaces | RS232, 10/100 Base-T Ethernet (optional), ASCII over fiber (optional) |
| Relay Outputs | Three SPST relays (1 A, 30 V DC/AC |
| Analog Inputs | Optional 4–20 mA inputs for process temperature & pressure compensation |
| Calibration Interval | Recommended every 6–12 months |
| Installation Modes | In-situ (direct flange-mounted), extractive (sample cell), or bypass configuration |
| Brand | Sheaumann Laser |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | MIR-Pac |
| Laser Type | Solid-State Mid-Infrared Laser |
| Wavelength | 2.94 µm (2940 nm) |
| Output Power | 1 W / 1.5 W (CW, free-space or fiber-coupled) |
| Spatial Mode | TEM₀₀, M² < 1.2 |
| Spectral Bandwidth | < 0.5 cm⁻¹ |
| Wavelength Stability | < ±1 cm⁻¹ |
| Beam Diameter | < 2.0 mm |
| Beam Divergence | < 20 mrad |
| Pointing Stability | < ±5% of beam divergence |
| Intensity Noise (10 Hz–100 kHz) | < 1.0% RMS |
| Long-Term Power Stability | < ±2.0% over 8 h |
| Polarization | Random |
| Warm-up Time | < 5 min |
| Operating Ambient Temperature | 15–40 °C |
| Power Dissipation | < 100 W |
| Laser Head Dimensions | 114 × 52 × 38 mm³ |
| Laser Head Weight | 0.82 kg |
| Driver Option | DRV-002 High-Power Laser Diode & TEC Controller |
| [Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | S1FC635, S1FC675, S1FC780, S1FC1310, S1FC1550, S3FC1310, S3FC1550, LPS-FC/LPM-SMA Series |
| Output Power Range | 1.5–22.5 mW |
| Wavelength Options | 635–1550 nm |
| Fiber Types | SM600, SM800-5.6-125, SMF-28 |
| Connector Types | FC/PC, SMA |
| Integrated Electronics | Constant-Current Driver (S1), Thermo-Electric Cooler (TEC) + Driver (S3), DFB Laser Diode Option (LPS-1550DFB-FC)] |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Model | 320NX |
| Central Wavelength | 320 nm |
| Output Power | Up to 200 mW (fixed within operating range) |
| Spectral Bandwidth | < 0.5 MHz |
| Spatial Mode | TEM₀₀ |
| Operation Mode | CW, Single Longitudinal Mode (SLM) |
| Spectral Stability (8 h) | ±0.2 pm |
| Power Stability (8 h, P-P) | ≤ 2% |
| Intensity Noise (10 Hz–10 MHz) | ≤ 0.1% RMS |
| Beam Diameter (exit aperture) | 0.6–1.2 mm |
| Beam Divergence | 1.0 mrad (diffraction-limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Coherence Length | > 100 m |
| Polarization Ratio | ≥ 100:1 (vertical) |
| Laser Head Dimensions | 240 × 150 × 100 mm |
| Controller Dimensions | 238 × 170 × 54 mm |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Beam Height | 65 mm |
| Operating Temperature | 18–30 °C (laser head stability ±1.5 °C) |
| Storage Temperature | 0–50 °C |
| Humidity | 0–50% RH (non-condensing) |
| Cooling Options | Fan-assisted heatsink or water-cooled TEC |
| Interface | USB (plug-and-play), optional external analog modulation (0–10 V), AOM-compatible up to 200 kHz |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Model | 349NX |
| Wavelength | 349 nm |
| Output Power | Up to 200 mW (fixed within operating range) |
| Spectral Bandwidth | ≤ 0.5 MHz |
| Spatial Mode | TEM₀₀ |
| Operation Mode | Continuous Wave (CW), Single Longitudinal Mode (SLM) |
| Spectral Stability (8 h) | ±0.2 pm |
| Power Stability (8 h) | ≤ 2% (peak-to-peak) |
| Intensity Noise (10 Hz–10 MHz) | ≤ 0.1% RMS |
| Coherence Length | > 100 m |
| Polarization Ratio | ≥ 100:1 (vertical) |
| Beam Diameter (exit aperture) | 0.6–1.2 mm |
| Beam Divergence | 1.0 mrad (diffraction-limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Laser Head Dimensions (L×W×H) | 240 × 150 × 100 mm |
| Controller Dimensions (L×W×H) | 238 × 170 × 54 mm |
| Beam Height | 65 mm |
| Operating Temperature | 18–30 °C (laser head thermal stability ±1.5 °C) |
| Storage Temperature | 0–50 °C |
| Humidity | 0–50% RH (non-condensing) |
| Cooling Options | Fan-assisted heatsink or water-cooled TEC |
| Interface | USB (plug-and-play), remote diagnostics support |
| Optional Features | Closed-loop chiller, fiber coupling (multimode >95%, single-mode >70%), external AOM modulation up to 200 kHz, analog 0–10 V power control (0–100%) |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Model | 532NX |
| Wavelength | 532 nm |
| Output Power | up to 2000 mW |
| Spectral Linewidth | ≤ 0.5 MHz |
| Power Stability (8 h, P-P) | ≤ 1% |
| Spectral Stability (8 h) | ±0.2 pm |
| Intensity Noise (10 Hz–10 MHz) | ≤ 0.1% RMS |
| Beam Mode | TEM₀₀ |
| Coherence Length | > 100 m |
| Polarization Ratio | ≥ 100:1 (vertical) |
| Beam Diameter (exit) | 0.7–1.1 mm |
| Beam Divergence | 1.0 mrad (diffraction-limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Operating Temperature | 18–30 °C |
| Storage Temperature | 0–50 °C |
| Humidity | 0–50% RH (non-condensing) |
| Laser Head Dimensions | 240 × 150 × 100 mm |
| Controller Dimensions | 245 × 170 × 54 mm |
| Beam Height | 65 mm |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Product Type | Imported |
| Model | 640 NX |
| Core Technology | Compact Diode-Pumped Solid-State (C-DPSS) Laser System |
| Center Wavelength | 640 nm |
| Max Output Power | 1500 mW |
| Spectral Bandwidth | ≤ 0.5 MHz |
| Power Stability (8 h, P-P) | ≤ 1% |
| RMS Intensity Noise (10 Hz–10 MHz) | ≤ 0.1% |
| Coherence Length | > 100 m |
| Beam Mode | TEM₀₀ |
| Beam Diameter (Exit Aperture) | 0.8–1.2 mm |
| Beam Divergence | 1.0 mrad (Diffraction-Limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Polarization Ratio | > 100:1 (Vertical) |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Operating Temperature | 18–30 °C |
| Storage Temperature | 0–50 °C |
| Relative Humidity | 0–50% (Non-Condensing) |
| Laser Head Dimensions (L×W×H) | 210 × 100 × 80 mm |
| Controller Dimensions (L×W×H) | 238 × 170 × 54 mm |
| Beam Height | 65 mm |
| Spectral Stability (8 h) | ±0.2 pm |
| Thermal Control Stability | ±1.5 °C |
| Interface | USB 2.0 (Plug-and-Play), Optional Analog Modulation Input (0–10 V) |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Model | 780 NX |
| Center Wavelength | 780 nm |
| Output Power | up to 200 mW |
| Spectral Linewidth | ≤ 0.3 MHz |
| Power Stability (8 h, P-P) | ≤ 2% |
| Spectral Stability (8 h) | ±0.2 pm |
| Beam Mode | TEM₀₀ |
| Coherence Length | > 100 m |
| Polarization Ratio | ≥ 100:1 (vertical) |
| Beam Diameter (exit) | 0.8–1.2 mm |
| Beam Divergence | 1.0 mrad (diffraction-limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Operating Temperature | 18–30 °C |
| Storage Temperature | 0–50 °C |
| Humidity | 0–50% RH (non-condensing) |
| Laser Head Dimensions | 210 × 100 × 80 mm |
| Controller Dimensions | 238 × 170 × 54 mm |
| Beam Height | 65 mm |
| Interface | USB, analog 0–10 V input for power control |
| Optional | closed-loop chiller, fan-cooled heatsink, fiber coupling (multimode >95%, single-mode >70%), AOM-based intensity modulation up to 200 kHz |
| Brand | Solar |
|---|---|
| Origin | Belarus |
| Type | Solid-State Pulsed Laser System |
| Model Variants | LQ115, LQ215, LQ215-D, LQ629, LQ529C, LQ529B, LQ529A, LQ929B, LQ929A |
| Pulse Energy (1064 nm) | 90–1400 mJ |
| Pulse Repetition Rate | 1–100 Hz |
| Pulse Width (FWHM) | 6–18 ns |
| Beam Divergence | ≤3 mrad (typ. <1.5 mrad) |
| Beam Diameter | 4–11 mm |
| Pulse Energy Stability | ±1.5% to ±2.5% (RMS) |
| Jitter (External Trigger) | ±1 ns to ±1.5 ns |
| Cooling | Air or Integrated Water-to-Air |
| Interface | RS232 |
| Optional Harmonic Generators | LG101 (SHG), LG103 (THG/FHG), LG105 (FHG) |
| Brand | Solar |
|---|---|
| Origin | Belarus |
| Model | LX329 |
| Tuning Range (Fundamental) | 700–980 nm |
| SHG | 350–490 nm |
| THG | 235–320 nm |
| FHG | 210–240 nm |
| Linewidth (w/o etalon) | <0.05 nm |
| Linewidth (w/ etalon) | <0.005 nm |
| Repetition Rate | 10 Hz |
| Pulse Width | 7–30 ns |
| Beam Divergence | 1 mrad |
| Dimensions | 650 × 285 × 135 mm³ |
| Conversion Efficiency | Fundamental 25%, SHG 30%, THG/FHG 20% |
| Core Gain Medium | Ti:Sapphire Solid-State Crystal |
| Brand | SOLARS |
|---|---|
| Origin | Russia |
| Model | LP601 |
| Pump Wavelength | 355 nm |
| Tuning Range (Signal + Idler) | 410–2500 nm |
| Second-Harmonic Generation (SHG) Range | 210–420 nm |
| Linewidth | ≤4 cm⁻¹ (typ.) |
| Nonlinear Crystal | BBO |
| Pump Requirements | Nd:YAG, 355 nm, ≤100 mJ, 4–12 ns, ≤60 MW/cm² |
| Dimensions | 255 × 155 × 70 mm |
| OPO Architecture | Intracavity or Standalone Synchronous OPO |
| Brand | SOLAR |
|---|---|
| Origin | Russia |
| Model | LQ215-D |
| Type | Solid-State Nanosecond Pulsed Nd:YAG Laser |
| Harmonic Output | 1064 nm, 532 nm, 355 nm, 266 nm, 213 nm |
| Max Pulse Energy (1064 nm) | 130 mJ |
| Repetition Rate | Up to 50 Hz |
| Compliance | CE, RoHS, IEC 60825-1 Class 4 Laser Product |
| Brand | Solars |
|---|---|
| Model | SHR Series |
| Origin | Belarus |
| Type | Imported Optical Measurement Instrument |
| Spectral Range (SHR) | 190–1100 nm |
| Absolute Accuracy (SHR) | ±0.003 nm |
| Spectral Resolution (SHR) | 0.006 nm @ 193 nm, 0.04 nm @ 1200 nm |
| Spectral Range (SHR-IR) | 600–1800 nm |
| Absolute Accuracy (SHR-IR) | ±0.02 nm |
| Spectral Resolution (SHR-IR) | 0.15 nm @ 600 nm, 0.48 nm @ 1800 nm |
| Linewidth Requirement | ≤125 cm⁻¹ |
| Optical Interface | SMA-905 fiber connector, 400 µm core, 1 m length |
| Attenuation | Integrated FA-3 diffuse attenuator |
| Operation Modes | CW and externally triggered pulsed |
| Brand | Spark Lasers |
|---|---|
| Model | ALCOR 780 |
| Central Wavelength | 780 nm |
| Average Power | 0.8 W (up to 4 W optional) |
| Repetition Rate | 80 MHz (40 MHz optional) |
| Pulse Duration | <150 fs |
| Beam Delivery | Free-space collimated output |
| Laser Head Dimensions | 286 × 165 × 79 mm³ |
| Weight | <5 kg |
| Cooling | Air-cooled |
| GDD Pre-compensation Range | 0 to –60,000 fs² (standard), up to –90,000 fs² optional |
| Interfaces | USB, RS232, TCP/IP, TTL sync output |
| Synchronization Jitter | <100 fs RMS |