Light Source Xenon Lamp Mercury Lamp
Filter
Showing 301–330 of 384 results
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SME300E H1 |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Lamp Power | 300 W |
| Total Optical Output | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Diameter | 30–60 mm |
| Maximum Irradiance | >4200 mW/cm² |
| Long-Term Stability | ≤±3% |
| Power Supply Stability | ±0.3% (instantaneous) |
| Current Limit Adjustment | up to 25 A |
| Lamp Lifetime | >1000 h |
| Triggering | Integrated High-Voltage Ignition (two-stage, no high-voltage cabling) |
| Control Modes | Constant Current / Constant Irradiance |
| Feedback System | Precision Optical Photometric Feedback |
| Cooling Architecture | Redesigned Forced-Air Thermal Management |
| Interface | RS232/Ethernet-enabled Host PC Software Control |
| Safety Features | Fan-fault shutdown, auto-startup, delayed shutdown, over-current/over-load protection |
| Compliance | Designed for GLP-compliant photoreactor integration and ISO/IEC 17025-aligned optical calibration workflows |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLS-STAS-I |
| Light Source Type | Direct Natural Sunlight (Outdoor Concentrated Illumination) |
| Illumination Mode | Internal Irradiation Configuration |
| Tracking Method | Hybrid Optical + Astronomical Time-Based Tracking |
| Elevation Range | 0–90° |
| Azimuth Range | −110° to +110° (0° = True South) |
| Tracking Accuracy | <0.3° (Optical), <1° (Time-Based) |
| Fresnel Lens Area | 0.2 m² |
| Minimum Focal Spot Area | 7 cm² |
| Concentration Ratio | 278× |
| Operating Temperature | 5–60°C |
| Ambient Temperature Range | −25°C to +55°C |
| Pressure Condition | Ambient Atmospheric |
| Gas Collection | 300 mL / 500 mL Gas Sampling Bags |
| Photosynthetic/Photochemical Irradiance Measurement | ≤10 W/cm² |
| Radiation Monitoring | Direct & Global Solar Irradiance |
| Environmental Sensors | Ambient Temperature, Relative Humidity, Barometric Pressure, Wind Speed |
| IP Rating | IP67 |
| Wind Resistance | Up to Beaufort Scale 6 |
| Control Architecture | Integrated PLC with GPS Geolocation and Real-Time Parameter Logging |
| Safety Features | End-Position Limit Switches, Wind-Activated Auto-Stow, Rain Detection & Shutdown |
| Brand | PerfectLight (PerkinElmer-compatible architecture) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300/300UV |
| Light Source Type | DC-powered short-arc xenon lamp |
| Illumination Mode | External irradiation configuration |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm with optional optics) |
| Beam Divergence | ~6° (FWHM) |
| Spot Diameter | 30–60 mm (adjustable via working distance) |
| Long-term Irradiance Stability | ≤ ±3% over 8 h |
| Lamp Power Rating | 300 W (adjustable 150–300 W) |
| Lamp Lifetime | >1000 h (under photoreactor-relevant irradiance conditions) |
| Current Limit | 21 A |
| Ignition Method | Integrated dual-stage high-voltage trigger (no HV cabling between power supply and lamp housing) |
| Thermal Management | Passive aluminum finned heat sink |
| EMI Shielding | Fully enclosed grounded metal lamp housing |
| Control Interface | Microprocessor-based digital power management with programmable operation mode |
| Safety Compliance | No high-voltage transmission in interconnect cable |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Light Source Type | Xenon Arc Lamp |
| Output Power Range | 150–300 W |
| Rated Lamp Power | 300 W |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Divergence | ~6° (full angle) |
| Spot Diameter | 30–60 mm (at working distance) |
| Long-Term Irradiance Stability | ≤ ±3% |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Trigger Method | Integrated High-Voltage Ignition (dual-stage, no high-voltage cabling) |
| Max Current Limit | 21 A |
| Cooling | Passive heatsink-based thermal management |
| Illumination Mode | External (top-down or side-illumination compatible) |
| Safety Design | Low-voltage lamp-to-power-supply interconnect, EMI-shielded metal housing |
| Control Interface | Microprocessor-based digital power management with programmable mode |
| Brand | PerfectLight (Perfetlight) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300+300UV |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Total Optical Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Divergence | ~6° (average) |
| Spot Diameter | 30–60 mm (distance-dependent) |
| Long-Term Irradiance Stability | ≤ ±3% |
| Lamp Power | 300 W |
| Power Adjustment Range | 150–300 W |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Max Current Limit | 21 A |
| Triggering Method | Integrated High-Voltage Ignition (dual-stage, no high-voltage cabling) |
| Lamp Housing | Shielded Metal Enclosure |
| Power Management | Microcontroller-Based Digital Control |
| Safety | Low-Voltage Interconnect Between Lamp Housing and Power Supply |
| Brand | PerfectLight (PoPhilae) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300D / PLS-SXE300DUV |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Total Optical Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Divergence | Avg. 6° |
| Spot Diameter | Adjustable at 30–60 mm working distance |
| Long-Term Irradiance Stability | ≤ ±3% |
| Lamp Power | 300 W |
| Power Adjustment Range | 150–300 W |
| Power Supply Ripple | 200 mVp-p |
| Lamp Lifetime | >1000 h |
| Max Current Limit | 21 A |
| Trigger Method | Integrated High-Voltage Ignition (Two-Stage, No HV Transmission) |
| Cooling | Axial Fan-Based Heat Dissipation (Patented Structure, CN201320740323.5) |
| Optional Accessory | PLS-LA320A Homogenizer |
| Brand | PerfectLight (Perfetlight) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300E |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Lamp Power | 300 W |
| Power Adjustment Range | 150–300 W |
| Power Supply Ripple | 150 mVp-p |
| Load Regulation | ±0.5% |
| Current Display | Digital |
| Control Mode | Programmable / PC Software Interface |
| Current Limit Setting | 21 A |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Triggering Method | Integrated High-Voltage Ignition (two-stage, no high-voltage cabling) |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 320–2500 nm) |
| Beam Divergence | Avg. 6° |
| Spot Diameter | 30–60 mm (distance-dependent) |
| Long-Term Stability | ≤±3% |
| Cooling Architecture | Axial Fan-Based Heat Dissipation (Patent CN201320740323.5) |
| Safety Features | No HV transmission between lamp housing and power supply, fan-fault protection, auto-start on power-up, shutdown delay, overcurrent/overload cutoff |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300E / PLS-SXE300EUV |
| Lamp Type | 300 W Short-Arc Xenon Lamp |
| Illumination Mode | External Irradiation |
| Power Adjustment Range | 150–300 W |
| Power Supply Ripple | 150 mVp-p |
| Load Regulation | ±0.5% |
| Current Limit Setting | 21 A |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 320–2500 nm with optional optics) |
| Beam Divergence | ~6° (full angle, average) |
| Spot Diameter | 30–60 mm (distance-dependent) |
| Long-Term Intensity Stability | ≤±3% (over 8 h) |
| Triggering Method | Integrated High-Voltage Ignition (dual-stage, no high-voltage cabling between lamp and power supply) |
| Cooling Architecture | Axial Air-Cooling System (Patent No. CN201320740323.5) |
| Control Interface | RS232/USB for PC-based software control |
| Safety Features | Fan-failure shutdown, auto-startup, post-shutdown cooling delay, over-current & over-load protection |
| Housing Material | Non-metallic lamp housing |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Lamp Type | Xenon Arc Lamp |
| Rated Power | 1800 W |
| Cooling Method | Air-Cooled |
| Rated Lifetime | 1500 hours |
| Compatible Models | Q-SUN Xe-1, Q-SUN Xe-3 |
| Spectral Range | Full-spectrum (290–800 nm), UV-Visible-NIR |
| Mounting Configuration | External Irradiation Source |
| Filter Dependency | Requires Borosilicate Outer Sleeve + Multi-element Inner Filter Assembly (7-piece per set) |
| Compliance | ASTM G155, ISO 11341, ISO 4892-2, AATCC TM16, SAE J2527 |
| Brand | Qioptiq |
|---|---|
| Origin | UK |
| Model | iFLEX-IRIS-405 |
| Wavelength | 405 nm |
| Output Power | 25 mW |
| Beam Mode | TEM₀₀ (M² < 1.1) |
| Beam Diameter (at aperture) | 0.7 mm |
| Beam Divergence | Diffraction-limited |
| Polarization Ratio | >200:1 (Vertical ±2°) |
| Power Stability (8 h) | <0.5% RMS |
| Intensity Noise | <0.05% RMS (20 Hz – 20 MHz) |
| Pointing Stability | <1 µrad/°C |
| Dimensions | 70 mm × 40 mm × 38 mm |
| Delivery | Free-space or single-mode polarization-maintaining fiber-coupled output |
| Illumination Type | External illumination |
| Brand | Qioptiq |
|---|---|
| Origin | United Kingdom |
| Model | iFLEX-IRIS |
| Dimensions | 70 mm × 40 mm × 38 mm |
| Output | Single-wavelength, fiber-coupled (single-mode, polarization-maintaining) |
| Modulation | Closed-Loop Modulation (CLM) with automatic power control |
| Thermal Stability | Active temperature stabilization, mode-hop-free operation |
| Beam Quality | TEM₀₀, high pointing stability |
| Compliance | Designed for integration into CE-compliant OEM instrumentation |
| Fiber Interface | KineFLEX® PM-fiber coupling, free-space/fiber-output dual configuration |
| Brand | QOptronics |
|---|---|
| Origin | Shanghai, China |
| Model | High Power EYDFA |
| Operating Wavelength | 1535–1565 nm |
| Input Power Range | –5 to +10 dBm |
| Output Power Range | 27–37 dBm |
| Noise Figure (at 0 dBm input) | ≤6 dB |
| Polarization-Dependent Gain | ≤0.5 dB |
| Pump Leakage to Output | ≤–30 dBm |
| Pump Leakage to Input | ≤–30 dBm |
| Return Loss (EDFA off) | ≥40 dB |
| AC Power Supply | 100–240 VAC |
| Power Consumption | 8–50 W |
| Operating Temperature | –5 to +55 °C |
| Storage Temperature | –20 to +70 °C |
| User Interface | LCD display with LED status/alarm indicators |
| Network Interface | RJ-45, RS-232, or RS-485 |
| Dimensions | 90×70×19 mm (module), 483×385×44 mm (1U 19″ rack), or 320×220×90 mm (benchtop) |
| Control Modes | ACC, APC, AGC |
| Output Power Options | 10, 13, 20, 27 dBm (customizable) |
| Pigtail Fiber Options | 250 µm, 900 µm, 2 mm, 3 mm |
| Connector Types | FC/UPC, FC/APC, SC/APC |
| Brand | QOptronics |
|---|---|
| Model | LQ-ASE-L-P-PW-SP(GFF) |
| Central Wavelength | 1565–1610 nm |
| Output Power | 7–15 dBm |
| Spectral Flatness (with GFF) | <3 dB |
| Power Spectral Density | ≥−2 to −20 dBm/nm |
| DOP | ≤5% |
| Spectral Stability | ≤±0.05 dB/5 min |
| Output Power Short-Term Stability | ≤±0.02 dB/15 min |
| Output Power Long-Term Stability | ≤±0.03 dB/8 h |
| Operating Temperature | 0–65 °C (−20–65 °C optional) |
| Power Supply | 110/220 V AC or +5 V / +3.3 V DC |
| Max. Power Consumption | 10 W |
| Dimensions (Module) | 90×70×19 mm |
| Dimensions (Benchtop) | 320×220×90 mm |
| Fiber Pigtail | SMF-28 |
| Connector | FC/UPC or FC/APC |
| Brand | QOptronics |
|---|---|
| Origin | Shanghai, China |
| Model | LQ-SLED-1310-P-PW-SP |
| Central Wavelength | 1310 ± 10 nm |
| −3 dB Spectral Bandwidth | ≥ 45 nm |
| Output Power Options | 1, 5, 10, 20, 30, 35 mW |
| Spectral Ripple | ≤ 0.2 dB |
| Short-Term Power Stability | ≤ ±0.01 dB / 15 min |
| Long-Term Power Stability | ≤ ±0.03 dB / 8 h |
| Operating Temperature | 0–40 °C |
| Storage Temperature | −20–70 °C |
| Power Supply | AC 110/220 V ±10 %, 50 Hz, 20 W |
| Package Options | Benchtop (320 × 220 × 90 mm) or Module (90 × 70 × 19 mm) |
| Fiber Pigtail | SMF-28 single-mode |
| Output Connector | FC/UPC or FC/APC |
| Operating Mode | Continuous Wave (CW) |
| Feedback Protection | Optional (SP=1) |
| Brand | Qphotonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | DFB-1550-50 |
| Light Source Type | Semiconductor Laser Diode |
| Illumination Method | Internal (Fiber-Coupled) |
| Wavelength | 1550 nm ± 0.5 nm |
| Output Power | 45 mW (typ.) |
| Spectral Linewidth | < 1 MHz |
| Package | 14-pin Butterfly with TEC, Thermistor & Monitor Photodiode |
| Fiber Output | Single-Mode or Polarization-Maintaining (PM) Pigtail |
| Operating Mode | CW or Pulsed via Current/Temperature Tuning |
| Brand | Qphotonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | FBG Series |
| Light Source Type | Semiconductor Laser Diode (FBG-Stabilized) |
| Wavelength Range | 405–1650 nm |
| Output Power Range | 0.5–350 mW |
| Spectral Linewidth | ≤500 kHz (typical), up to 10 MHz (select models) |
| Tuning Range | ±0.05 nm (center wavelength) |
| Package Options | 14-pin DIL or Butterfly |
| Fiber Options | Single-mode or Polarization-Maintaining (PM) |
| Connector | FC/PC or FC/APC |
| Built-in Components | Thermistor, TEC, Monitor Photodiode |
| Rise Time | 0.5 ns |
| Operating Mode | CW or Pulsed |
| Brand | Qphotonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | LP Series |
| Light Source Type | Broadband Semiconductor Light Source |
| Wavelength Range | 405–1650 nm |
| Output Power Range | 0.2–300 mW (CW) |
| Spectral Bandwidth (FWHM) | 1–120 nm |
| Package Options | Butterfly, 14-Pin DIL, 9 mm TO, Mini-DIL, Chip-on-Carrier |
| Fiber Coupling | Single-mode, FC/APC optional |
| Integrated Components | Monitor Photodiode, Thermistor, TEC |
| Operating Mode | CW or Pulsed (10 ns rise/fall time) |
| Brand | Qphotonics |
|---|---|
| Origin | USA |
| Type | Single-mode laser diode |
| Wavelength range | 395–1650 nm |
| Output power | 1 mW to 1200 mW |
| Spectral linewidth | 0.01–10 nm (depending on type) |
| Package options | 14-pin DIL, 14-pin butterfly, coaxial, mini-DIL |
| Integrated components | Thermistor, TEC, monitor photodiode |
| Fiber coupling | SMF-28 with FC/PC or FC/APC connector |
| Operating mode | CW or pulsed |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Light Source Type | Other Light Source |
| Illumination Mode | Internal Illumination |
| Electrode Types | Ag/AgCl (R0302, R0303, R0305), Saturated Calomel (R0232) |
| Outer Diameter | 4 mm (R0302), 6 mm (R0303), 5/9 mm (R0232) |
| Internal Electrolyte | 3.5 mol/L KCl (R0302/R0303), Saturated KCl (R0305/R0232) |
| Construction Features | Removable fill port (R0302), side-fill port (R0303), powder-pressed Ag/AgCl element (R0305), classical Hg/Hg₂Cl₂ design (R0232) |
| Brand | ScanSci |
|---|---|
| Model | ScanSource |
| Spectral Range | 200–1100 nm (standard), optional down to 180 nm |
| Lamp Types | Deuterium (D₂) + Tungsten-Halogen (W) |
| Deuterium Power | 30 W |
| Tungsten Power | 9 W |
| Output Stability (Fluctuation) | ≤2×10⁻⁵ A.U. |
| Long-Term Drift | ±0.3 %/h (D₂), ±0.25 %/h (W) |
| External Control | Shutter, Lamp On/Off, Main Power On/Off |
| Fiber Coupling | SMA 905 |
| Deuterium Lamp Lifetime | 2000 h |
| Tungsten Lamp Lifetime | 2000 h |
| Cooling | Active (fan-cooled) |
| Dimensions | 157 × 178 × 250 mm |
| Compliance | CE, RoHS |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | 16S/LS1000 |
| Light Source Type | Xenon Arc Lamp |
| Irradiation Mode | External Top-Down Illumination |
| Compliance | FDA, ISO 24443, COLIPA (now Cosmetics Europe), JCIA, Australian Standard AS/NZS 2604 |
| Effective Dose | 4 MED (1 MED = 21 mJ/cm² effective erythemal dose) |
| Uniformity | <20% spatial variation (meets FDA requirement) |
| Beam Diameter (16S) | 75 mm (covers 2" × 2" PMMA plate) |
| Beam Area (LS1000-4S) | 4" × 4" (for simultaneous irradiation of four 2" × 2" PMMA plates) |
| Optional Beam Area | 6" × 6" (for nine plates) |
| Temperature Rise on PMMA | <0.2 °C during full 4-MED exposure |
| Exposure Time (16S) | ~23 min for 4 MED |
| Exposure Time (LS1000-4S) | ~20 min for 4 MED per plate |
| Detector Compatibility | PMA2101 Erythemal Sensor, PMA2100 Radiometer with dose-integration and auto-shutoff |
| Footprint | <2 ft² |
| Cooling | Air-cooled, no external chiller required |
| Brand | SPECIM |
|---|---|
| Origin | Finland |
| Model | HI400S |
| Spectral Range | 400–2500 nm |
| Illumination Width | 350 mm |
| Power Supply | Wide-range AC input |
| Modular Design | Yes |
| Application Domain | Hyperspectral Imaging (VNIR–SWIR) |
| Compliance | CE, RoHS |
| Brand | Spectro-UV |
|---|---|
| Origin | USA |
| Model | AccuMAX™ XRP-3000A |
| UV-A Irradiance Range | 0–100 mW/cm² |
| Visible Light Illuminance Range | 0–5,300 lux (0–500 fc) |
| Power Source | Two 9V alkaline batteries |
| Overall Accuracy | < ±5% (NIST-traceable calibration) |
| Compliance | ASTM E3022, ASTM E2297 |
| Application Fields | Aerospace NDT, Laboratory Testing, Forensic Inspection, Industrial Quality Control |
| Brand | Spectro-UV |
|---|---|
| Origin | USA |
| Model | CM-10A, CM-24A, CM-26A |
| Dimensions (L×W×H) | CM-10A & CM-26A: 30 × 22.8 × 16.5 cm |
| CM-24A | 61 × 26.7 × 35.6 cm |
| UV Irradiance | 300 µW/cm² at 365 nm (UVA), 310 µW/cm² at 254 nm (UVC) |
| Light Source Type | External-mount high-intensity UV lamps (E-series, ENF-240C, ENF-260C) |
| Illumination Mode | External irradiation |
| Compliance | Designed for ASTM E1417, ISO 3452-2, and forensic light source protocols per IAI/ENFSI guidelines |
| Brand | Spectro-UV |
|---|---|
| Origin | USA |
| Model Variants | ENF-240C, ENF-260C, ENF-280C, EA-140, EA-160 |
| Power Options | 4 W, 6 W, 8 W |
| Wavelength Options | 254 nm (UV-C), 365 nm (UV-A), UV-A only |
| Filter Configuration | Integrated filter tube or external filter assembly |
| Housing | Anodized silver aluminum |
| Dimensions (L×W×H) | 17.6–33.65 cm × 8.26 cm × 6.36 cm |
| Weight | 0.73–1.77 kg |
| Illumination Mode | External irradiation |
| Application Scope | NDT, forensic analysis, life sciences, gemology, rodent contamination detection, agricultural inspection |
| Brand | Spectro-UV |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | EagleEye™ EEX-1000 |
| Price Range | USD 1,400 – 7,200 (FOB) |
| Light Source Type | UV-A LED (365 nm peak) + White LED (Dual-Mode) |
| Illumination Mode | External (Hand-Free, Head-Worn) |
| UV-A Intensity (at 38 cm) | ≥15,000 µW/cm² |
| UV-A Beam Diameter (at 38 cm) | 11.4 cm (4.5 in) |
| Power Supply | Rechargeable 3.7 V, 3000 mAh Li-ion Battery |
| Continuous UV-A Runtime | 5 hours |
| White Light Runtime | N/A (mode-dependent) |
| Compliance | ASTM E3022-18, ISO 3059:2012, AITM6-1001 Issue 15, RRES 90061:2014 |
| Visible Light Emission | ≤21.5 lux (at working distance) |
| Spectral FWHM | ≤15 nm @ 365 nm |
| Current Ripple | <5% |
| Thermal Cutoff Protection | Yes |
| EMC Certification | Per unit + model-specific test report |
| Brand | Spectro-UV |
|---|---|
| Origin | USA |
| Model | EDGE Series Overhead UV-A Lamp |
| Light Source Type | UV-A LED Array |
| Illumination Method | External Top-Down Illumination |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| UV-A Intensity (at 38 cm) | 4,700–8,500 µW/cm² |
| UV-A Emission Range | 365 nm peak (±5 nm) |
| Beam Coverage (at 38 cm) | 37 × 33 cm to 45 × 43 cm |
| LED Configuration | 4–16 UV-A LEDs + optional white-light LEDs |
| Compliance | ASTM E3022, ISO 3059, Rolls-Royce RRES 90061, Airbus AITM6, Pratt & Whitney standards |
| Application Scope | NDT, cleanroom inspection, forensic documentation, aerospace component verification |
| Brand | Spectro-UV |
|---|---|
| Origin | USA |
| Model | ML-3500 Series |
| Light Source Type | Micro-Discharge Lamp (MDL) |
| Irradiation Mode | External Illumination |
| UV-A Intensity (at 38 cm) | 5,700–90,000 µW/cm² |
| Power Consumption | 35 W |
| Filter Options | 2F100CN, 2F958N, 4.5-hour N-type |
| Compliance | Meets IEC 62471 Photobiological Safety Classification for Risk Group 1 (Exempt) |
| Mercury Content | <3% of standard HID lamp mercury load |
| Brand | Spectro-UV |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Portable UV-A Flashlight |
| Price Range | USD $1,200 – $6,500 |
| Light Source Type | UV-A LED Array (365 nm nominal) |
| Illumination Mode | External Irradiation |
| IP Rating | IP68 |
| Battery Options | NiMH / Li-ion / Alkaline |
| Runtime | 1.5–9 hours (model-dependent) |
| UV-A Intensity (at 38 cm) | 4,500–33,000 µW/cm² |
| Beam Diameter (at 38 cm) | 5.0–15.2 cm Ø |
| Compliance | ASTM E3022, ISO 3059, ANSI Z87.1 (UV eye protection recommended) |
| Brand | Spectro-UV |
|---|---|
| Origin | USA |
| Model Variants | Q-12, Q-22, Q-22B, QZ-22B, QZ-22 |
| UV Peak Intensity (at 15 cm) | 700–1400 µW/cm² |
| Lamp Type | Integrated-filter UV-A fluorescent tubes (4 W each) |
| Dual-mode Option | UV-A + white light (Q-22, QZ-22) |
| Ballast & Housing | Lightweight phenolic resin construction |
| Handle | Ergonomic, fatigue-resistant phenolic grip |
| Dimensions (W × L × H) | 5.75 in × 7 in × 2.25 in (14.6 cm × 17.8 cm × 5.7 cm) |
| Weight | 0.9–1.2 kg |
| Input Current | 0.2–0.4 A |
| Illumination Mode | External irradiation (handheld or benchtop) |