Optical Instruments
Filter
Showing 3391–3420 of 7440 results
| Brand | Integrated Optics |
|---|---|
| Model | 0405L-1064L |
| Wavelength Range | 405–1064 nm |
| Output Type | Free-space / SM/PM/MM Fiber-Coupled |
| Linewidth | <1 pm (typ.) |
| SMSR | >60 dB |
| Power Stability (RMS, 8 h) | <2% |
| Intensity Noise (RMS, 20 Hz–20 MHz) | <1% |
| Beam Diameter (1/e²) | ~1 mm (DPSS) |
| Beam Divergence | <1.5 mrad (DPSS, except 532/785 nm @ 500 mW) |
| Beam Pointing Stability | <1 mrad/°C |
| Polarization Extinction Ratio (PM fiber) | >20 dB |
| Polarization Rotation | <5° |
| Operating Voltage | +5 V DC |
| Dimensions | 50 × 30 × 18 mm |
| TEC Cooling | Integrated |
| Safety Features | Over-temperature Protection |
| Modulation | TTL & Analog Input Compatible |
| Control Interface | Standardized 12-pin header |
| Fiber Connector | FC/APC (SM/PM), FC/PC (MM/SMA) |
| Brand | Integrated Optics |
|---|---|
| Model | 0405L–1342L |
| Wavelength Range | 405–1342 nm (discrete lines) |
| Output Type | Free-space, SM/PM/MM fiber-coupled |
| Dimensions | 50 × 30 × 18 mm |
| Power Supply | +5 V DC |
| Cooling | Integrated TEC |
| Power Stability (RMS, 8 h) | <1–2% |
| Intensity Noise (RMS, 20 Hz–20 MHz) | <0.6–3% |
| Spectral Bandwidth | <0.5–20 nm |
| Modulation | Analog & Digital TTL |
| Compliance | RoHS, CE |
| Brand | Integrated Optics |
|---|---|
| Model | 40A-48A-XXY-64A-11 |
| Dimensions | 50 × 30 × 18 mm |
| Output Options | Free-space or multimode fiber-coupled (105/200/400 µm core) |
| Wavelength Channels | Up to 4 (e.g., 405/488/520/638 nm) |
| Power Stability | <1% RMS (8 h) |
| Intensity Noise | <2% RMS (20 Hz–20 MHz) |
| Spectral Bandwidth | <1.5 nm (FWHM) |
| Spatial Mode | TEM₀₀ or top-hat-like multimode |
| Cooling | Integrated TEC |
| Control Interface | Digital & analog modulation, 5 V DC supply |
| Compliance | RoHS, CE |
| Brand | Integrated Optics |
|---|---|
| Model | 0515L-21C, 1030L-21C |
| Wavelength | 515 ± 0.2 nm / 1029.5 ± 0.5 nm |
| Pulse Width | <10 ns (0515L-21C), <10 ns (1030L-21C) |
| Repetition Rate | <35 kHz |
| Single-Pulse Energy | <25 µJ (0515L-21C), <35 µJ (1030L-21C) |
| Average Power | 150 mW (0515L-21C), 300 mW (1030L-21C) |
| Power Stability | <1% RMS (8 h) |
| Spectral Bandwidth | <1 pm (0515L-21C), <1 pm (1030L-21C) |
| Spatial Mode | TEM₀₀ |
| Operating Voltage | 5 V DC |
| Dimensions | 50 × 30 × 18 mm |
| Cooling | Integrated TEC |
| Modulation | Digital & Analog |
| Output Options | Free-space, SM/PM/MM fiber-coupled |
| Brand | Invitrogen |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Category | Imported |
| Model | FLoid |
| Pricing | Upon Request |
| Dimensions | 40.4 cm (W) × 53.6 cm (H) × 35.3 cm (D) |
| Weight | 11.8 kg |
| Power Input | 100–240 VAC, 50–60 Hz |
| DC Output | 5 V DC, 4.15 A |
| Operating Temperature | 4–32 °C |
| Operating Humidity | <90% RH (non-condensing) |
| Camera Sensor | Sony ICX445 EXview HAD CCD, 1.3 MP, 1/3″ format |
| Image Resolution | 1296 × 964 pixels |
| Display | 15″ color LCD, 1366 × 768 resolution, adjustable tilt |
| Objective | 20× Plan Fluor, NA 0.45, WD 5.9 mm |
| Total Magnification | 460× (optical) to 1840× (digital zoom) |
| Resolution Limit | 0.5 µm |
| Illumination | Long-life LED (50,000 h), intensity-adjustable |
| Excitation Filters | 390/40 nm (blue), 482/18 nm (green), 586/15 nm (red) |
| Emission Filters | 446/33 nm (blue), 532/59 nm (green), 646/68 nm (red) |
| Imaging Modes | Brightfield (relief contrast phase), Blue/Green/Red fluorescence |
| Channels | 4 (phase + 3 fluorescence) |
| Stage Travel | X/Y ±4 mm |
| Stage Clearance | 60 mm |
| Supported Vessels | Slides, multiwell plates, culture flasks |
| File Formats | 16-bit monochrome TIFF, JPEG, BMP, PNG |
| Software | FLoid™ Cell Imaging Station Software (v3.x or later) |
| Language Support | English, Spanish, German, French, Italian, Japanese, Chinese |
| USB Ports | 4 |
| Included Media | 2 GB USB drive |
| Brand | Invitrogen |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | EVOS M5000 |
| Pricing | Available Upon Request |
| Brand | Invitrogen |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | EVOS S1000 |
| Pricing | Available Upon Request |
| Sensor Resolution | 4.2 Megapixels |
| Camera Type | 16-bit sCMOS |
| Objective Turret | 5-position, supporting 2.5× to 40× objectives |
| Brand | Invitrogen |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | EVOS XL Core |
| Pricing | Upon Request |
| Brand | Spectrum Technologies |
|---|---|
| Origin | USA |
| Model | 2860 |
| Magnification Range | 40×–140× |
| Interface | USB 2.0 |
| Illumination | Integrated LED |
| Software Included | Basic Imaging Suite (Labeling, Annotation, Timestamping, Scale Calibration) |
| Optional Upgrades | Real-time Video Capture Module (2860V), UV Illumination Variant (2860UV), Megapixel Sensor Version (2860MP), 3D Stereo Mount (2860HS), macOS-Compatible Software (2860MAC) |
| Compliance | CE, FCC, RoHS |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | IPS |
| Pricing | Upon Request |
| Core Components | Semiconductor Laser Source & Integrated Packaging |
| Brand | IRISIOME |
|---|---|
| Origin | France |
| Model | MANNY Series |
| Wavelength Options | 515/532/775/780 nm (VIS) or 1030/1064/1550/1560 nm (IR) |
| Pulse Width | 35 ps – several ns (adjustable) |
| Repetition Rate | 1 Hz – 2 GHz (with Burst mode) |
| Average Power | 10 mW – 20 W (model-dependent) |
| Spectral Width | <1 nm (FWHM) |
| Pulse Energy | >1 µJ |
| RMS Power Stability | <2% |
| Timing Jitter | <10 ps RMS |
| Polarization | Linear, >20 dB |
| Beam Quality | M² <1.3 (free-space output) or fiber-coupled |
| Cooling | Air-cooled |
| Brand | IRISIOME |
|---|---|
| Origin | France |
| Model | SID Series |
| Wavelength Options | 515/532/775/780/1030/1064/1550/1560 nm |
| Average Output Power | 10 mW – 20 W |
| Pulse Width | 15–35 ps (FWHM) |
| Repetition Rate | 1 Hz – 2 GHz (continuous & burst mode) |
| Spectral Bandwidth | <1 nm (FWHM) |
| Pulse Energy | >1 µJ |
| Power Stability | <2% RMS |
| Timing Jitter | <10 ps RMS |
| Polarization | Linear, >20 dB |
| Beam Quality | M² <1.3 (free-space), fiber-coupled options available |
| Cooling | Air-cooled |
| Origin | Imported |
|---|---|
| Manufacturer Type | Distributor |
| Model | Haoliang. |
| Image Resolution | Customizable up to 120 MP (e.g., 16,384 × 7,680) |
| Pixel Size | 50 µm or 100 µm (selectable) |
| Active Chip Area | Up to 82 mm × 39 mm (wafer-level tiling supported) |
| On-Sensor Memory | 36 GB DDR4 buffer integrated on sensor carrier PCB |
| Readout Speed | Up to 40 fps at full resolution (configurable via ROI and binning) |
| Dynamic Range | ≥85 dB (typical, 16-bit linear output) |
| Quantum Efficiency | >90% at 550 nm (back-illuminated, thinned silicon) |
| Brand | ISS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Alba-STED |
| Price | USD 680,000 (FOB New York) |
| Brand | ISS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | FLIM/FFS Upgrade Kits |
| Instrument Type | Point-Scanning Confocal Microscope |
| Time Resolution | 1 ps |
| Acquisition Range | 100 ps – 100 ms |
| Detection Channels | 8 |
| Channel Bandwidth | 65 MHz/channel |
| Detector Configuration | NDD-based Two-Photon Detection |
| Supported Platforms | Leica TCS SP8, Nikon A1/C2, Olympus FV1000/FV1200/FV3000/FVMPE-RS, Zeiss LSM 710/LSM 780 |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | Q2 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Resolution | 1×1 to 4096×4096 pixels |
| Excitation Sources | 266 nm, 355 nm, 405 nm lasers, white-light supercontinuum laser, two-photon laser |
| Detectors | High-speed hybrid detectors, extended-Infrared avalanche photodiodes (eIR-APDs), cryogenically cooled sCMOS spectrometers |
| Scanning Modules | 2D galvanometric mirrors, piezo Z-stage, closed-loop motorized XY stage |
| Scanning Mode | Galvo-based XY scanning + piezo-driven Z-axis scanning |
| Optical Zoom | 0.25×–2.5× |
| Microscope Host | Upright or inverted configuration |
| Illumination | Tungsten-halogen lamp or white LED |
| Software Suite | Dedicated FLIM acquisition software with Phasor Plot analysis module |
| Vibration Isolation Platform | 1200 mm × 1500 mm optical table |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | Q2 |
| Fluorescence Lifetime Range | 100 ps – 100 ms |
| Time Resolution | ≤1 ps |
| Counting Rate | 65 MHz/channel |
| Detection Channels | up to 8 |
| Scan Mode | Galvo-based XY scanning (5 kHz) with closed-loop motorized stage |
| Spatial Resolution | configurable from 1×1 to 4096×4096 pixels |
| Frame Rate | up to 20 fps @ 256×256 |
| Spectral Range (detection) | 350–1100 nm & 900–1700 nm |
| Excitation Options | UV–Vis–NIR lasers, supercontinuum source, single- or two-photon excitation |
| Temperature Control | 77 K – 500 K |
| Compliance | GLP/GMP-ready data audit trail, FDA 21 CFR Part 11–compatible software architecture |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | SMT-3D Nanoimaging |
| Category | Upgraded Add-on for Olympus FV1000/FV1200 Laser Scanning Confocal Microscopes |
| Detection Principle | Modulation Tracking via Feedback-Controlled Circular Beam Oscillation |
| Lateral Resolution | 20–40 nm (±2 nm) |
| Axial Precision | 2 nm |
| XY Tracking | Galvo Mirror System |
| Z Tracking | Piezo-Driven Stage |
| Data Acquisition Rate | 32–256 kHz |
| Orbit Frequency | 2 kHz |
| Detector | Internal PMT of FV1000/FV1200 + ISS Photon Counting Unit |
| Software | SimFCS (Globals Unlimited) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Ocean Optics |
|---|---|
| Origin | USA |
| Model | ISS-2 |
| Light Source Type | Tungsten-Halogen Lamp |
| Illumination Geometry | Internal (In-Cuvette) |
| Optical Path Length | 1 cm |
| Collimating Lens | 5 mm Ø, f/2, BK7 glass, f = 10 mm, SMA 905 connector |
| Filter Holder | Accepts filters up to 6.35 mm (1/4") thick |
| Base Material | Aluminum |
| Spectral Range | 360 nm – 2000 nm |
| Dimensions (L×W×H) | 155.0 × 50.0 × 53.3 mm |
| Input Power | 12 VDC / 800 mA (operating range: 7–20 VDC / 0.5–2 A) |
| Lamp Power | 5 V / 1.3 A |
| Output Power | 6.5 W |
| Lamp Lifetime | 900 h |
| Warm-up Time to Stability | ~30 min |
| Voltage Regulation Accuracy | ±0.2% |
| Cooling | Integrated axial fan beneath lamp assembly |
| Positioning Mechanism | Spring-loaded spherical screw for precise 1 cm cuvette alignment |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iStar Series |
| Sensor Format | 512 × 512 or 1024 × 1024 |
| Image Intensifier Diameter | 18 mm or 25 mm |
| Phosphor Screen | P43 or P46 |
| Minimum Optical Gate Width | 2 ns |
| Delay Resolution | 25 ps |
| Total Trigger-to-Gate Delay | 40 ns |
| Gating Technology | Intelligate™ Synchronized MCP–Photocathode Gating |
| Onboard Digital Delay Generator | Yes |
| Remote Control Interface | Wireless |
| UV Response | Optimized for deep-UV with >10⁷ on/off contrast ratio |
| Compliance | Designed for GLP/GMP-compliant time-resolved imaging workflows requiring traceable timing control |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-30 |
| Spectral Range | 190–2500 nm (UV version) |
| Spectral Radiance | ~40 mW/(mm²·sr·nm) |
| Spatial Output Power | ~1.5 W |
| Fiber-Coupled Output Power | ~0.4 W |
| Emitter Size | 100 × 200 µm |
| Lifetime | 10,000 hours |
| Stability (STD) | <0.15% |
| Numerical Aperture | 0.5–0.55 (adjustable) |
| Dimensions (L×W×H) | 110 × 110 × 120 mm |
| Weight | 2 kg |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Cooling | Air-cooled |
| Purge Gas | High-purity N₂ or Ar (≥ Class 6), flow rate 1 L/min |
| Output Interfaces | C-mount, Thorlabs SM1, 30 mm cage system |
| Control Interface | USB-RS485 |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-65 |
| Light Source Type | Laser-Pumped Plasma |
| Spectral Range | 190–2500 nm (UV-VIS-NIR) |
| Spectral Radiance | ~50 mW/(mm²·sr·nm) |
| Output Power (Free-Space) | ~3 W |
| Output Power (Fiber-Coupled) | ~0.5 W |
| Plasma Emission Size | 250 × 500 µm |
| Stability (STD) | <0.15% |
| Lifetime | 10,000 h |
| Numerical Aperture | Adjustable 0.4–0.55 |
| Cooling | Air or Water (Lamp & Controller) |
| Input Power | 100–240 V, 50/60 Hz |
| Purge Gas | N₂ or Ar, ≥Grade 6, 1 L/min |
| Lamp Housing Dimensions | 130 × 110 × 74 mm, 1.3 kg |
| Controller Dimensions | 351 × 172 × 232 mm, 8 kg |
| Output Interfaces | C-mount, Thorlabs SM1, 30 mm cage system |
| Fiber Coupling | SMA or FC (FCU version only) |
| Optional Configurations | UV-optimized (190–2500 nm) or OFR-optimized (250–2500 nm), free-space or fiber-coupled output |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-X |
| Spectral Range | 190–2500 nm (UV), 250–2500 nm (OFR) |
| Spectral Radiance | ~120 mW/(mm²·sr·nm) |
| Spatial Output Power | ~3 W |
| Fiber-Coupled Output Power | ~0.6 W |
| Emitter Size | 250 × 500 µm |
| Lifetime | 10,000 h |
| Stability (STD) | <0.15% |
| Numerical Aperture | Adjustable 0.4–0.55 |
| Cooling | Air or Water (lamp housing & controller) |
| Input Power | 100–240 V, 50/60 Hz |
| Purge Gas | Grade 6+ N₂ or Ar, 1 L/min |
| Housing Dimensions (Lamp) | 130 × 110 × 74 mm, 1.8 kg |
| Controller Dimensions | 351 × 172 × 232 mm, 8 kg |
| Output Interfaces | C-mount, Thorlabs SM1, 30 mm cage (free-space) |
| Brand | Itioture |
|---|---|
| Origin | Taiwan |
| Manufacturer Type | OEM/ODM Producer |
| Model | XDRS-028 |
| Measurement Range (Salinity) | 0–28% w/w NaCl |
| Resolution | 0.1% |
| Accuracy | ±0.2% |
| Temperature Measurement Range | 0–40 °C |
| Temperature Accuracy | ±1 °C |
| ATC Range | 5–40 °C |
| Dimensions | 120 × 56 × 36 mm |
| Weight | 120 g |
| Display | Backlit LCD |
| Brand | Ivium |
|---|---|
| Origin | Netherlands |
| Model | Modulight |
| Light Source Type | Infrared-capable LED-based modular light source |
| Illumination Mode | External illumination |
| Spectral Output | 7 standard channels (460–740 nm + 5500K white) + 4 optional channels (365 nm, 400 nm, 4000K natural white, 3100K warm white) |
| Intensity Control | Software-controlled DC or sinusoidally modulated (10 µHz – 2 MHz) |
| Compliance | Designed for integration with Ivium electrochemical workstations (e.g., Stat, Vertex, CompactStat series) and compatible with ISO/IEC 17025-aligned electro-optical testing workflows |
| Brand | Ixblue / Ixblue Photonics |
|---|---|
| Origin | France |
| Distributor Type | Authorized Distributor |
| Import Status | Imported |
| Model | IXF-PDF (Phosphorus-Doped Fiber) |
| Active Fiber Type | Yes |
| Component Category | Optical Component |
| Raman Gain Coefficient (Typ.) | 2.5 (W·km)⁻¹ |
| P₂O₅ Concentration | High |
| Attenuation | Low |
| Splicing Loss | Low |
| Bend Loss | Low |
| Raman Shift Peak | ~1320 cm⁻¹ |
| Primary Pump Wavelengths | 1060 nm, 1310 nm |
| Output Stokes Bands | ~1240 nm (1st Stokes), ~1480 nm (2nd Stokes), ~1550 nm (3rd Stokes / C-band signal band) |
| Brand | Ixblue |
|---|---|
| Origin | France |
| Type | Active Polarization-Maintaining LMA Fiber |
| Core Diameter | 40 µm |
| Mode Field Area | 750 µm² |
| Cladding Diameter | 220 µm |
| Coating Diameter | 320 µm |
| Numerical Aperture (Core) | 0.065 |
| Cut-off Wavelength | 970 ± 30 nm |
| Pump Absorption @ 976 nm | 1.2 ± 0.2 dB/m |
| Polarization Extinction Ratio | ≥20 dB/10 m |
| Proof Test Level | 100 kpsi |
| Operating Wavelength Range | 1030–1080 nm |
| Brand | iXblue |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | LAZ-LAB-NIR |
| Wavelength Range | 780–1080 nm |
| Output Type | Continuous-wave (CW), fiber-coupled |
| Laser Chip | Monolithic DFB semiconductor (InGaAsP/InP) |
| Package | Compact OEM module with integrated TEC and photodiode monitor |
| Control Interface | USB and analog voltage inputs |
| Software | LAZ-CONTROL GUI (Windows/Linux) |
| Compliance | CE, RoHS, IEC 60825-1 Class 1 |
| Brand | Ixblue / Ixblue Photonics |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Optical Component |
| Model Series | Specialty Multicore Fiber |
| Core Count | 4–12 Cores |
| Photosensitivity | Yes (FBG-compatible) |
| Fiber Types | Active-doped (e.g., Er-doped radiation-hardened) & Passive Power Delivery Variants |
| Compliance | ITU-T G.652.D / G.657.A1 baseline architecture, compatible with standard fiber splicing and grating inscription platforms |
| Brand | Ixblue |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Optical Component |
| Model | Specialty Fiber (Single-Mode / Polarization-Maintaining / Radiation-Hardened / Dual-Clad) |
| Coating Options | Polyimide, Aluminum, Acrylate, Silicone |
| Core Material | Pure Silica |
| Compliance | ITU-T G.652.D, G.657.A1, IEC 60793-2-50 |
| Key Applications | FBG Fabrication, High-Power Laser Delivery, Radiation-Resistant Sensing, High-Temperature Interferometry |