Optical Measurement Instruments
Filter
Showing 3271–3300 of 3889 results
| Brand | Jinfly |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Origin Category | Domestic (China) |
| Model | SPEC Series |
| Pricing | Upon Request |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Model | 320NX |
| Central Wavelength | 320 nm |
| Output Power | Up to 200 mW (fixed within operating range) |
| Spectral Bandwidth | < 0.5 MHz |
| Spatial Mode | TEM₀₀ |
| Operation Mode | CW, Single Longitudinal Mode (SLM) |
| Spectral Stability (8 h) | ±0.2 pm |
| Power Stability (8 h, P-P) | ≤ 2% |
| Intensity Noise (10 Hz–10 MHz) | ≤ 0.1% RMS |
| Beam Diameter (exit aperture) | 0.6–1.2 mm |
| Beam Divergence | 1.0 mrad (diffraction-limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Coherence Length | > 100 m |
| Polarization Ratio | ≥ 100:1 (vertical) |
| Laser Head Dimensions | 240 × 150 × 100 mm |
| Controller Dimensions | 238 × 170 × 54 mm |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Beam Height | 65 mm |
| Operating Temperature | 18–30 °C (laser head stability ±1.5 °C) |
| Storage Temperature | 0–50 °C |
| Humidity | 0–50% RH (non-condensing) |
| Cooling Options | Fan-assisted heatsink or water-cooled TEC |
| Interface | USB (plug-and-play), optional external analog modulation (0–10 V), AOM-compatible up to 200 kHz |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Model | 349NX |
| Wavelength | 349 nm |
| Output Power | Up to 200 mW (fixed within operating range) |
| Spectral Bandwidth | ≤ 0.5 MHz |
| Spatial Mode | TEM₀₀ |
| Operation Mode | Continuous Wave (CW), Single Longitudinal Mode (SLM) |
| Spectral Stability (8 h) | ±0.2 pm |
| Power Stability (8 h) | ≤ 2% (peak-to-peak) |
| Intensity Noise (10 Hz–10 MHz) | ≤ 0.1% RMS |
| Coherence Length | > 100 m |
| Polarization Ratio | ≥ 100:1 (vertical) |
| Beam Diameter (exit aperture) | 0.6–1.2 mm |
| Beam Divergence | 1.0 mrad (diffraction-limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Laser Head Dimensions (L×W×H) | 240 × 150 × 100 mm |
| Controller Dimensions (L×W×H) | 238 × 170 × 54 mm |
| Beam Height | 65 mm |
| Operating Temperature | 18–30 °C (laser head thermal stability ±1.5 °C) |
| Storage Temperature | 0–50 °C |
| Humidity | 0–50% RH (non-condensing) |
| Cooling Options | Fan-assisted heatsink or water-cooled TEC |
| Interface | USB (plug-and-play), remote diagnostics support |
| Optional Features | Closed-loop chiller, fiber coupling (multimode >95%, single-mode >70%), external AOM modulation up to 200 kHz, analog 0–10 V power control (0–100%) |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Model | 532NX |
| Wavelength | 532 nm |
| Output Power | up to 2000 mW |
| Spectral Linewidth | ≤ 0.5 MHz |
| Power Stability (8 h, P-P) | ≤ 1% |
| Spectral Stability (8 h) | ±0.2 pm |
| Intensity Noise (10 Hz–10 MHz) | ≤ 0.1% RMS |
| Beam Mode | TEM₀₀ |
| Coherence Length | > 100 m |
| Polarization Ratio | ≥ 100:1 (vertical) |
| Beam Diameter (exit) | 0.7–1.1 mm |
| Beam Divergence | 1.0 mrad (diffraction-limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Operating Temperature | 18–30 °C |
| Storage Temperature | 0–50 °C |
| Humidity | 0–50% RH (non-condensing) |
| Laser Head Dimensions | 240 × 150 × 100 mm |
| Controller Dimensions | 245 × 170 × 54 mm |
| Beam Height | 65 mm |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Product Type | Imported |
| Model | 640 NX |
| Core Technology | Compact Diode-Pumped Solid-State (C-DPSS) Laser System |
| Center Wavelength | 640 nm |
| Max Output Power | 1500 mW |
| Spectral Bandwidth | ≤ 0.5 MHz |
| Power Stability (8 h, P-P) | ≤ 1% |
| RMS Intensity Noise (10 Hz–10 MHz) | ≤ 0.1% |
| Coherence Length | > 100 m |
| Beam Mode | TEM₀₀ |
| Beam Diameter (Exit Aperture) | 0.8–1.2 mm |
| Beam Divergence | 1.0 mrad (Diffraction-Limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Polarization Ratio | > 100:1 (Vertical) |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Operating Temperature | 18–30 °C |
| Storage Temperature | 0–50 °C |
| Relative Humidity | 0–50% (Non-Condensing) |
| Laser Head Dimensions (L×W×H) | 210 × 100 × 80 mm |
| Controller Dimensions (L×W×H) | 238 × 170 × 54 mm |
| Beam Height | 65 mm |
| Spectral Stability (8 h) | ±0.2 pm |
| Thermal Control Stability | ±1.5 °C |
| Interface | USB 2.0 (Plug-and-Play), Optional Analog Modulation Input (0–10 V) |
| Brand | Skylark Lasers |
|---|---|
| Origin | United Kingdom |
| Model | 780 NX |
| Center Wavelength | 780 nm |
| Output Power | up to 200 mW |
| Spectral Linewidth | ≤ 0.3 MHz |
| Power Stability (8 h, P-P) | ≤ 2% |
| Spectral Stability (8 h) | ±0.2 pm |
| Beam Mode | TEM₀₀ |
| Coherence Length | > 100 m |
| Polarization Ratio | ≥ 100:1 (vertical) |
| Beam Diameter (exit) | 0.8–1.2 mm |
| Beam Divergence | 1.0 mrad (diffraction-limited) |
| Beam Pointing Stability | ≤ 5 µrad/°C |
| Warm-up Time | 5–30 min |
| Power Consumption | < 200 W |
| Operating Temperature | 18–30 °C |
| Storage Temperature | 0–50 °C |
| Humidity | 0–50% RH (non-condensing) |
| Laser Head Dimensions | 210 × 100 × 80 mm |
| Controller Dimensions | 238 × 170 × 54 mm |
| Beam Height | 65 mm |
| Interface | USB, analog 0–10 V input for power control |
| Optional | closed-loop chiller, fan-cooled heatsink, fiber coupling (multimode >95%, single-mode >70%), AOM-based intensity modulation up to 200 kHz |
| Brand | TimePower |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | TP130 |
| Pricing | Upon Request |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | SOL |
| Spectral Range | 400–2500 nm |
| Number of Discrete Bandpass Channels | 16 |
| Adjustable Irradiance | Continuous |
| Filter Type | Precision Narrowband Interference Filters |
| Operating Temperature | +5 °C to +35 °C |
| Storage Temperature | −5 °C to +55 °C |
| Dimensions (W×D×H) | 119 × 40 × 24 cm |
| Weight | 29.2 kg |
| Measurement Capabilities | NEI, Responsivity, Linearity, Dynamic Range, D*, Quantum Efficiency, Spatial Noise, Relative Spectral Responsivity |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | 16S |
| Lamp Type | 150 W / 300 W Xenon Arc |
| Spectral Class | ASTM Class A (AM1.5G) |
| Calibration | NIST-traceable |
| Power Supply | XPS200 (200 W) or XPS400 (400 W) |
| Beam Orientation | Horizontal or Vertical (with optional PMA2144-compatible vertical adapter) |
| Output Intensity Range | 10–100% (80–100% via front-panel knob |
| Typical Irradiance | 1000 W/m² (6 cm Ø), 2000 W/m² (3 cm Ø), 4000 W/m² (2 cm Ø) |
| Spot Uniformity | Compliant with ASTM E927-19 requirements |
| Filter | AM1.5G, NIST-traceable, integrated |
| Compliance | ASTM G151, G155, E948, E927, G173 |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | LS1000 |
| Spectral Output Options | UV, AM0, AM1.5, AM1 |
| Beam Shape | Circular or Square |
| Beam Diameter/Size | 2–12 in (circular), 4–12 in (square) |
| Uniformity | ±5% |
| Collimation Half-Angle | <4° |
| Light Source | 1000 W Xenon Short-Arc Lamp (also configurable with Hg-Xe or Mercury Arc) |
| Lamp Lifetime | ~900 hours |
| Calibration | NIST-traceable prior to shipment |
| Compliance | ASTM E927-05, E948-09, G173-03e1, G151, G155 |
| Optional Features | Electronic Shutter, Precision Dose Control System, Custom Filters, Air-Cooled Thermal Management |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2100 |
| Detector Compatibility | >35 Digital Sensor Types (UVA, UVB, UVC, Visible, NIR, Broadband, Spectral) |
| Calibration | NIST-Traceable |
| Data Logging | Internal Memory with Timestamped Records |
| Display | Graphical LCD with Real-Time Plotting |
| Measurement Modes | Instantaneous, Averaging, Min/Max Tracking, Dose Integration, Threshold Alarming |
| Units | Adjustable (W/m², mW/cm², µW/cm², Lux, ft-cd, MED/hr, J/m², etc.) |
| Operating Temperature | 0 to +50 °C |
| Housing | Handheld, Ruggedized Industrial Enclosure |
| Sensor Interface | Auto-Recognizing Digital Bus (PMA-DIGI™ Protocol) |
| Power | Rechargeable Li-ion Battery (≥12 hr runtime) |
| Compliance | ASTM E471, ISO 17166:2022 (CIE S 026/E:2018), IEC 62471, ACGIH TLV® for UV Exposure |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2100 |
| Detector Inputs | 2 |
| Input Ranges | ±0.4 V, ±4 V (auto-ranging) |
| Resolution (±0.4 V range) | 15 µV |
| Dynamic Range | >2×10⁵ |
| Accuracy | ±0.5% FS across all ranges |
| Nonlinearity | ≤0.02% FS per range |
| Temperature Coefficient | ≤50 ppm/°C |
| Data Memory | 1024 points |
| Operating Temperature | 0–50 °C |
| Power | 4×AA NiCd or alkaline batteries |
| Weight | 480 g (17 oz) |
| Dimensions | 10 × 19.5 × 4.5 cm (4″ W × 7.6″ H × 1.75″ D) |
| Safety Compliance | UL 61010-1 Annex DVC |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2101 |
| Spectral Response | CIE 1987 Erythema Action Spectrum (280–320 nm) |
| Angular Response | Lambertian (cosine-corrected, ≤5% deviation up to 60°) |
| Measurement Range | 0.01 µW/cm² to >1 mW/cm² |
| Units | MED/hr, µW/cm², W/m² |
| Calibration | NIST-traceable |
| Operating Temperature | 0–50 °C (non-condensing) |
| Dimensions | Ø40.6 mm × 45.8 mm |
| Weight | 200 g |
| Cable | Retractable 0.3–1.5 m |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2106 |
| Detection Principle | Broadband Non-Weighted UVB (280–320 nm) |
| Spectral Response | Flat, Unfiltered Silicon Photodiode with UVB-optimized optical filter |
| Angular Response | Lambertian (Cosine-corrected, ±5% up to 60° incidence) |
| Measurement Range | 0.001–200 mW/cm² (0.01–2000 W/m²) |
| Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Temperature Coefficient | ±1 %/°C (for solar UVB irradiance) |
| Cable | Retractable coaxial, 0.3–1.5 m |
| Dimensions | Ø40.6 mm × H45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable, factory-calibrated for UVB irradiance (mW/cm² and W/m²) |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2106 |
| Detection Principle | Broadband Non-Weighted UVB (280–320 nm) |
| Spectral Response | Flat, Unfiltered Silicon Photodiode with UVB-optimized optical filter |
| Angular Response | Lambertian (Cosine-corrected, ±5% up to 60° incidence) |
| Measurement Range | 0.001–200 mW/cm² (0.01–2000 W/m²) |
| Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Temperature Coefficient | ±1 %/°C (for solar UVB irradiance) |
| Calibration Traceability | NIST-traceable |
| Cable | Retractable coaxial cable, 0.3–1.5 m |
| Dimensions | Ø40.6 mm × H45.8 mm |
| Weight | 200 g |
| Compliance | ASTM E772, ISO 17166:1999 (CIE S 007/E), FDA 21 CFR Part 11 (when used with compliant PMA-series meter) |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2107 |
| Spectral Range | 280–400 nm (UVA: 315–400 nm, UVB: 280–315 nm) |
| Detector Type | Silicon photodiode with precision optical filter and cosine-corrected diffuser |
| Angular Response | ≤5% deviation from ideal Lambertian response up to 60° incidence angle |
| Measurement Range | 0.001–200 mW/cm² (0.01–2000 W/m²) |
| Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Temperature Coefficient | ±1 %/°C (for solar irradiance) |
| Calibration | NIST-traceable, factory-calibrated for broadband UVA+UVB irradiance |
| Physical Dimensions | Ø40.6 mm × H45.8 mm |
| Weight | 200 g |
| Cable | Retractable coaxial cable, 0.3–1.5 m |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2110 |
| Spectral Range | 320–400 nm |
| Cosine Error | ≤5% at angles <60° |
| Measurement Range | 0.001–200 mW/cm² (or 0.01–2000 W/m²) |
| Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | 0–50 °C |
| Detector Diameter | 40.6 mm |
| Height | 45.8 mm |
| Weight | 200 g |
| Cable | Retractable, 0.3–1.5 m |
| Temperature Coefficient | <0.1 %/°C |
| Environmental Rating | Indoor use only |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2112 |
| Spectral Range | 320–390 nm |
| Peak Sensitivity | ~365 nm |
| Operating Tip Temperature | 0–400 °C |
| Sensor Operating Temperature | 0–50 °C |
| Dynamic Range | 0.1 mW/cm² to 20 W/cm² |
| Display Resolution | 0.1 mW/cm² |
| Temperature Coefficient | <0.05 %/°C |
| Probe Diameter | 9.5 mm (0.375 in) |
| Probe Length | 18 in (457 mm) |
| Overall Dimensions | 40.6 mm × 500 mm |
| Weight | 425 g (15 oz) |
| Cable | Retractable, 0.3–1.5 m |
| Radiometric Units | kW/m², W/cm², or mW/cm² (user-selectable) |
| Dose Integration | Yes, with START/STOP control and 1024-point memory buffer |
| Compliance | NIST-traceable calibration |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2120 |
| Spectral Response | Aligned with ACGIH UV Hazard Action Spectrum (Fig. 1) |
| Angular Response | ≤5% deviation up to 60° from normal incidence |
| Measurement Range | 0–1 mW/cm² |
| Display Resolution | 0.01 μW/cm² |
| Dose Calculation | Real-time integration to mJ/cm² |
| TLV Mode | Displays time-to-reach ACGIH TLV (3 mJ/cm² per 8-hr shift) |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Cable | Retractable 0.3–1.5 m |
| Dimensions | Ø40.6 mm × H45.8 mm |
| Weight | 200 g |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | PMA2121 |
| Price | Upon Request |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2123 |
| Spectral Range | 425–475 nm |
| Calibration | NIST-traceable |
| Output Unit | μW/cm²/nm |
| Cosine Correction | Yes |
| Stability | Long-term drift < ±0.5% per year |
| Dynamic Range | 10⁴:1 (typical) |
| Detector Type | Silicon photodiode with bandpass interference filter |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2130 |
| Spectral Response | CIE 1931 photopic luminous efficiency function (V(λ), 400–700 nm) |
| Cosine Correction | Integrated, ±5% up to 60° incidence angle |
| Measurement Range (PMA2130 standard variant) | 1–150,000 lx |
| Radiometric Equivalent | 0.001–220 W/m² |
| Illuminance Units | lux (lx), foot-candle (ft-cd), W/m² |
| Display Resolution | 1 lx / 0.001 W/m² / 0.1 ft-cd |
| Operating Temperature | 0–50 °C |
| Dimensions | Ø40.6 mm × 45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable, certified per ISO/IEC 17025 accredited laboratory |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2131 |
| Spectral Response | CIE scotopic luminosity function (V′(λ), 400–600 nm) |
| Angular Response | ≤5% deviation up to ±60° |
| Measurement Range | 200,000 scotopic mLux / 20,000 mft-cd / 120,000 µW/m² |
| Resolution | 1 mLux / 0.1 mft-cd / 1 µW/m² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Detector Diameter | 40.6 mm |
| Height | 45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable |
| Cable | Retractable, 0.3–1.5 m |
| Cosine Correction | Integrated |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2132 |
| Spectral Range | 400–700 nm |
| Calibration | NIST-traceable |
| Cosine Response Error | ≤5% up to 80° incidence angle |
| Measurement Range | 0–20,000 µE·s⁻¹·m⁻² |
| Resolution | 0.1 µE·s⁻¹·m⁻² |
| Operating Temperature | −40 to +50 °C |
| Cable Length | 15 m (standard), optional retractable 0.3 m |
| Dimensions | Ø40.6 mm × 45.8 mm |
| Weight | 200 g |
| Temperature Coefficient | <0.15 %/°C |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2133 |
| Spectral Response | CIE Photopic Luminosity Function (400–700 nm) |
| Field of View | 8° |
| Measurement Range | 0–6,800 cd/m² (0–2,000 fL) |
| Resolution | 0.01 cd/m² or 0.01 fL |
| Operating Temperature | 0–50 °C |
| Cable Length | 1.5 m |
| Detector Diameter | 40.6 mm |
| Height | 81.3 mm |
| Weight | 110 g |
| Calibration | NIST-traceable cosine-corrected photometric calibration |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2140 |
| Spectral Range | 400–1100 nm |
| Cosine Response Error | ≤5% for incident angles <60° |
| Measurement Range | 0–2000 W/m² |
| Resolution | 0.01 W/m² |
| Operating Temperature | 0–50 °C (non-condensing) |
| Detector Diameter | 40.6 mm |
| Height | 45.8 mm |
| Weight | 200 g |
| Cable Length | 0.3 m (standard), extendable to 1.5 m |
| Compliance | ASTM G173, ISO 9060:2018 Class C (reference-grade context) |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2143 |
| Spectral Response | 0.2–50 µm |
| Field of View | 10° |
| Angular Response | ≤2% for incident angles <70° |
| Measurement Range | 1500 MED/hr or 150 µW/cm² |
| Display Resolution | 1 W/m² / 0.1 mW/cm² |
| Response Time | 30 s |
| Operating Temperature | −40 to +80 °C |
| Temperature Coefficient | ±6% (−10 to +40 °C) |
| Nonlinearity | ≤3% (at 50 mV output) |
| Detector Diameter | 40.6 mm |
| Cable Length | 1.82 m |
| Weight | 240 g |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2144 |
| Spectral Range | 310–2800 nm |
| Full-Scale Range | 2000 W/m² (200 mW/cm²) |
| Response Time | 18 s (95%) |
| Annual Drift | <1% |
| Nonlinearity | <2.5% (at 1000 W/m²) |
| Thermal Zero Offset | <15 W/m² (at 200 W/m²) |
| Cosine Response Error | ≤2% up to 70° zenith angle |
| Operating Temperature | −40 to +80 °C |
| Cable Length | 9 m |
| Sensor Diameter (with shade) | 60.3 mm |
| Weight | 0.31 kg |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2145 |
| Spectral Range | 310–2800 nm (FWHM) |
| Full-Scale Range | 2000 W/m² |
| Response Time | 18 s (95%) |
| Annual Drift | <1% |
| Nonlinearity | <1.0% (at 1000 W/m²) |
| Temperature Dependence | <2% (-10 to +40 °C) |
| Cosine Response Error | ≤1% up to 70° zenith angle |
| Zero Offset | <15 W/m² at 200 W/m² net irradiance |
| Resolution | 1 W/m² / 0.1 mW/cm² |
| Operating Ambient | -40 to +80 °C |
| Cable Length | 9 m |
| Sensor Diameter (with shade) | 60.3 mm |
| Height | 84.0 mm |
| Weight | 0.31 kg |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2200 |
| Detector Input | 1 channel (supports up to 4 analog signals from PMA21XX-series detectors) |
| Input Range | ±4 V |
| Resolution | 3 µV |
| Dynamic Range | 2.6 × 10⁶ (6.5-digit equivalent) |
| Accuracy | ±0.2% of full scale |
| Integral Non-Linearity | ±0.003% |
| Temperature Coefficient | ≤50 ppm/°C |
| Sampling Rate | 3 samples/sec |
| Display Refresh Rate | 10 Hz |
| Operating Temperature | 0–50 °C |
| Power | 4 × AA alkaline batteries (>40 h continuous operation) or external 9–12 V AC/DC adapter |
| Power Consumption | ~110 mW |
| Weight | 510 g (18 oz) |
| Dimensions | 10 × 19.5 × 4.5 cm (W × H × D) |
| LCD Size | 6.4 × 1.3 cm (2.5" × 0.5") |