Optical Measurement Instruments
Filter
Showing 3391–3420 of 3889 results
| Brand | HunterLab |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | FSD-200 |
| Price | Upon Request |
| Applicable Film Width | ≤210 mm |
| Minimum Detectable Feature Size | 0.1 mm (adjustable via CCD selection) |
| Spatial Resolution | Up to 30 µm (configurable with higher-resolution CCD) |
| Sensor Type | Area-Scan CCD |
| Maximum Web Speed | 18 m/min |
| Light Source | 30 W LED Cold Illumination |
| Communication Interfaces | RS232 / RS485 / Ethernet / USB |
| Power Supply | 220 VAC, 50 Hz |
| Dimensions (Upper Unit) | 230 × 131 × 108 mm |
| Dimensions (Lower Unit) | 272 × 160 × 252 mm |
| Compliance Standards | GB 6595–1986, ASTM D3351–93, GB/T 4611–2008, GB/T 11115–2009 |
| Brand | HunterLab |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FSD-300 |
| Quotation | Upon Request |
| Applicable Film Width | ≤340 mm |
| Minimum Detectable Feature Radius | 0.05 mm |
| Maximum Spatial Resolution | 30 µm |
| Sensor Type | Area-Scan CCD |
| Maximum Web Speed | 18 m/min |
| Light Source | 30 W LED Cold Illumination |
| Power Supply | 220 VAC, 50 Hz |
| Communication Interfaces | RS232 / RS485 / Ethernet / USB |
| Dimensions (Upper Unit) | 230 × 131 × 108 mm |
| Dimensions (Lower Unit) | 272 × 160 × 252 mm |
| Brand | HunterLab |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SP-Y-1908 |
| Measurement Range | 0.2 mm, 0.3 mm, 0.4 mm, 0.8 mm (software-selectable per standard) |
| Sensor | 20 MP CCD with high-resolution lens |
| Minimum Detectable Target Radius | 0.1 mm |
| Resolution | < 0.035 mm |
| Detection Area | ≥ 200 × 200 mm |
| Optical Magnification | > 30× |
| Illumination Intensity | ≥ 6000 lumens |
| Light Source | 24 V / 60 W halogen assembly |
| Power Supply | 220 V, 50 Hz |
| Dimensions | 459 × 426 × (276 + 380) mm |
| Brand | Supelco |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | 1100IR |
| Price Range | USD 2,800 – 7,000 |
| Type | Portable |
| Measurement Range | 0.01–1100 NTU |
| Resolution | 0.01 NTU (0–100 NTU range) |
| Operating Ambient Temperature | 10–30 °C |
| Accuracy | ±2% of reading or ±0.01 NTU, whichever is greater |
| Brand | Superlum |
|---|---|
| Origin | Russia |
| Model Variants | BS-785, BS-840, BS-930, BS-1060 |
| Wavelength Ranges | 765–815 nm, 805–880 nm, 900–980 nm, 1020–1090 nm |
| Output Power (Standard/HP) | 15–250 mW / up to 50–100 mW (HP variants) |
| Spectral Linewidth (FWHM) | ≤0.06–0.15 nm |
| Sweep Repetition Rate | 2–100 kHz |
| Power Consumption | 20–25 W |
| Operating Temperature | +15 °C to +30 °C |
| Storage Temperature | 0 °C to +40 °C |
| Dimensions (W×H×D) | 257×170×325 mm or 362×160×326 mm |
| Weight | 9–12 kg |
| Brand | Superlum (distributed by Auniontech) |
|---|---|
| Origin | Shanghai, China |
| Product Type | SLD-based broadband light source module |
| Spectral Range | 650–1620 nm |
| FWHM Bandwidth | up to 100 nm |
| Output Power | up to 100 mW (fiber-coupled) |
| Compliance | RoHS-compliant |
| Control Interface | Analog/Digital (ACC/APC), RS-232, TTL |
| Power Supply | 5–30 V DC |
| Modulation Bandwidth | up to 50 kHz |
| Brand | Superlum |
|---|---|
| Origin | Ireland |
| Model | SLD-HP-SM |
| Wavelength Range | 670–1610 nm |
| Output Power (SM) | up to 20 mW |
| Spectral Bandwidth (FWHM) | 50–200 nm |
| Coherence Length | <7 µm (T-series) to >10 µm (D-series) |
| Cooling | Thermoelectric (TEC) or uncooled options |
| Fiber Output | SM/PM/MM options available |
| Driver Compatibility | PILOT 4 DC/AC, PILOT WP2 dual-channel |
| Integrated Optical Isolator | S-series only |
| Compliance | RoHS, CE |
| Brand | SurfaceOptics |
|---|---|
| Origin | USA |
| Model | 410 DHR |
| Wavelength Bands | 0.9–1.1, 1.9–2.4, 3.0–4.0, 3.0–5.0, 4.0–5.0, 8.0–12.0 µm |
| Wavelength Resolution | Fixed-band spectral filtering (no scanning monochromator) |
| Measurement Time | 10 s per acquisition (after 90 s warm-up) |
| DHR Repeatability | ±0.5% absolute reflectance (typical, under controlled ambient conditions) |
| Incident Angles | 20° and 60° from normal |
| Sample Geometry Support | Flat, convex (≥6″ radius), concave (≥12″ radius) |
| IR Source | Kanthal® alloy resistive emitter |
| Probe Design | Modular, swappable optical heads |
| Display | Integrated touchscreen PDA with embedded control firmware |
| Operating Temperature | 0–40 °C (non-condensing) |
| Storage Temperature | −25–70 °C |
| Power | Dual rechargeable NiMH batteries |
| Weight | 2.1 kg (including batteries) |
| Calibration | NIST-traceable gold mirror reference standard included |
| Brand | SurfaceOptics |
|---|---|
| Origin | USA |
| Model | 410 Solar |
| Wavelength Range | 335–2500 nm |
| Wavelength Bands | 7 discrete bands (335–380, 400–540, 480–600, 590–720, 700–1100, 1000–1700, 1700–2500 nm) |
| Incident Angle | 20° from normal |
| Measurement Modes | Total reflectance, diffuse reflectance, and 20° specular reflectance |
| Repeatability | ±0.5% (within 10 s per measurement |
| Calibration Traceability | NIST-traceable gold reference standard included |
| Compliance | ASTM E903, ASTM C1549 |
| Spot Size | 0.250" diameter at 20° incidence |
| Beam Divergence | 3° half-angle |
| Operating Temperature | 0–40 °C (non-condensing) |
| Storage | −25 to 70 °C |
| Power | Dual rechargeable NiMH batteries |
| Weight | 2.1 kg (with batteries) |
| Display | Integrated PDA-style touchscreen interface with on-board SD card data storage |
| Brand | SurfaceOptics (SOC) |
|---|---|
| Origin | USA |
| Model | AE1/RD1 |
| Emissivity Measurement Range | 0.05–0.95 |
| Repeatability | ±0.01 |
| Measurement Time per Sample | ≤10 s |
| Sample Temperature Range | Up to 54 °C (130 °F) |
| Standard Blackbody Cavity Temperature Control | Required for thermal equilibrium |
| Detector Output Linearity Error | <±0.01 over full emissivity range |
| Output Signal | 2.4 mV at 25 °C, ε = 0.9, 150 Ω load |
| Power Supply | 100–240 VAC, 50–60 Hz → 12 VDC adapter |
| Optional Battery Pack | 12 V, 12 h continuous operation |
| Minimum Flat Sample Diameter | 5.7 cm (2.25 in) |
| with AE-AD1 | 2.54 cm (1.0 in) |
| with AE-AD3 | 1.9 cm (0.75 in measurement area) |
| Compliance | Designed for ASTM C1371, ISO 18434-1, and ASTM E1933-compliant emissivity validation workflows |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GRENOUILLE 8-50-ECO |
| Price Range | USD $13,500 – $27,000 |
| Wavelength | 633 nm / 660 nm / 780 nm / 785 nm |
|---|---|
| Linewidth | <200 kHz |
| Power Stability (p-p) | <2% |
| Center Wavelength Stability | ±1.5 pm (12 h, ±3 °C) |
| ASE Suppression | <–65 dBc |
| SMSR | >50 dB |
| Lifetime | >5000–6000 hrs |
| Dimensions | 2.5" × 1.25" × 1.25" |
| Operating Temp | 15–35 °C |
| Wavelength Selectability | 50 pm |
| Compliance | RoHS, CE |
| Wavelength | 532 nm |
|---|---|
| Output Power (CW) | 1000 mW |
| Beam Diameter | 0.7 mm ±0.2 mm (@ 10 mm, 1/e²) |
| Beam Mode | TEM₀₀, M² < 1.05 |
| Divergence | <1 mrad (½ angle) |
| Beam Pointing Stability | ≤10 μrad / °C |
| Longitudinal Mode | Single Longitudinal Mode (SLM), Linewidth <1 MHz |
| Polarization | Vertical, Extinction Ratio ≥100:1 |
| Intensity Noise (p-p) | ≤2% (10 Hz–10 MHz) |
| Intensity Noise (rms) | ≤0.3% (10 Hz–10 MHz) |
| Power Stability | ≤2% over 4 hours |
| Operating Temperature | 15–35 °C |
| Storage Temperature | 10–50 °C |
| Laser Head Dimensions | 186 × 139 × 96 mm |
| Laser Head Weight | 2540 g |
| Power Supply Dimensions | 225 × 246 × 110 mm |
| Power Supply Weight | 2960 g |
| Brand | Synoptics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Alexandrite (BeAl₂O₄:Cr³⁺) |
| Price Range | USD 0 – 7,200 (FOB) |
| Wavelength Tuning Range | 710–800 nm |
| Pulse Energy Capability | Multi-joule level |
| Thermal Shock Resistance | 5× higher than Nd:YAG |
| Crystal Structure | Orthorhombic |
| Chemical Formula | Be(Al₁₋ₓCrₓ)₂O₄ |
| Cr³⁺ Doping Concentration | 0.01–0.20 at.% (standard: 0.10 at.%, optimum: 0.83/d % where d = diameter in mm) |
| Diameter Tolerance | +0.000″ / −0.002″ |
| Edge Chamfer | 0.005″ ± 0.003″ @ 45° |
| Surface Finish | 55 ± 5 μin Ra (ground & polished) |
| Surface Flatness | λ/10 @ 632 nm |
| Parallelism | ≤30 arc-seconds |
| Perpendicularity | within 5 arc-minutes |
| Scratch-Dig | 10–5 per MIL-O-13830 |
| Wavefront Distortion | <0.5 wave/inch (measured at 1 µm) |
| Coating Options | Single-layer MgF₂ AR |
| Refractive Index (750 nm) | nₐ = 1.7367, n_b = 1.7421, n_c = 1.7346 (birefringent, biaxial) |
| Density | 3.7 g/cm³ |
| Melting Point | 1870 °C |
| Thermal Expansion (α) | αₐ = 5.9 × 10⁻⁶ K⁻¹, α_b = 6.1 × 10⁻⁶ K⁻¹, α_c = 6.7 × 10⁻⁶ K⁻¹ |
| Thermal Conductivity | 0.23 W/cm·K |
| Vickers Hardness | 2000 kg/mm² |
| Young’s Modulus | 469 GPa |
| Fracture Stress | 0.457–0.948 GPa |
| dn/dT | ~8 × 10⁻⁶ K⁻¹ |
| Nonlinear Refractive Index (n₂) | ~10⁻¹³ esu |
| Findlay-Clay Insertion Loss | <0.3 cm⁻¹ |
| Brand | Synoptics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Cr4+:YAG |
| Wavelength Range | 500–3000 nm |
| Crystal Orientation | <100> |
| Surface Finish | Flat/Flat |
| AR Coating | R < 0.2% @ 1064 nm |
| Laser-Induced Damage Threshold (LIDT) | >500 MW/cm² (10 ns, 10 Hz, 1064 nm) |
| Diameter | 3–10 mm |
| Thickness | 1–5 mm (customizable) |
| Optical Density (OD) Options | 0.30, 0.40, 0.50 ±10% @ 1064 nm |
| Absorption Coefficient (α) | 1.5–6.0 cm⁻¹ @ 1064 nm |
| Uniformity | High spatial homogeneity of Cr⁴⁺ distribution |
| Compliance | ISO 9001:2008 certified manufacturing and QA process |
| Brand | SYNOPTICS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | KTF |
| Price Range | USD $0 – $7,200 (FOB) |
| Crystal Structure | Cubic |
| Chemical Formula | KTb₃F₁₀ |
| Primary Application | Faraday Rotators & Optical Isolators for High-Power Lasers |
| Transmission Range | 400–1500 nm |
| Orientation | Standard <100>, Optional <111> |
| Diameter Tolerance | +0.000″ / −0.002″ |
| Edge Chamfer | 0.005″ ± 0.003″ @ 45° |
| Roll-off Polish | ≤55 µin Ra |
| Surface Flatness | λ/10 @ 633 nm |
| Parallelism | ≤60 arc-seconds |
| Perpendicularity | ≤10 arc-minutes |
| Wavefront Distortion | <¼ wave per inch @ 633 nm |
| AR Coating | R < 0.25% per surface (1064 nm, 0° AOI) |
| [Brand | SYNOPTICS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | TGG |
| Price Range | USD 0–7,200 (FOB) |
| Material | Terbium Gallium Garnet (Tb₃Ga₅O₁₂) |
| Crystal Orientation | [111] ±5° |
| Diameter Tolerance | +0.000″ / −0.002″ |
| Length Tolerance | +0.010″ / −0.010″ |
| Surface Roughness (RMS) | 55 ±5 μin |
| Edge Chamfer | 0.005″ ±0.003″ @ 45° ±5° |
| Wavefront Distortion | < λ/8 per inch (large rods), < λ/8 total (small rods) @ 632 nm |
| Extinction Ratio | ≥25 dB |
| AR Coating Reflectivity | <0.25% @ 1064 nm |
| Adhesion & Durability | Compliant with MIL-C-48497A |
| Pulsed Laser Damage Threshold | 10 J/cm² (1064 nm, 10 ns, 10 Hz) |
| Faraday Rotation Coefficient (V) | 134 rad·T⁻¹·m⁻¹ @ 1064 nm |
| Absorption Coefficient (α) | 0.0015 cm⁻¹ @ 1064 nm |
| Thermal Conductivity | 7.4 W·m⁻¹·K⁻¹ |
| Refractive Index (n) | 1.95 @ 1064 nm |
| Nonlinear Refractive Index (n₂) | 8.0 × 10⁻¹³ esu |
| Figure of Merit (V/α) | 27 |
| Figure of Merit (V/n) | 58] |
| Brand | Systec |
|---|---|
| Origin | Germany |
| Model | SK101PA |
| Wavelength Range Options | 375–450 nm (VISUV), 400–700 nm (UVIS), 450–800 nm (VIS), 700–1100 nm (NIR), 1100–1600 nm (IR) |
| Interface | USB 2.0 |
| Power Supply | Bus-powered via USB |
| Fiber Adapters | FC-APC (standard), FC-PC, DIN AVIO, ST (optional) |
| Free-space Beam Diameter | Up to 4 mm |
| Optical Power Range | 0.01–50 mW |
| Sampling Rate | 15 Hz |
| SOP Accuracy | ±0.2° |
| PER Accuracy | ±0.5 dB |
| DOP Accuracy | ±5% |
| Warm-up Time | 5 min |
| Dimensions (W×L×H) | 40 × 70 × 82 mm |
| Sample Compatibility | Free-space beams & polarization-maintaining (PM) fiber outputs (FC/APC, SMA-905 HP, etc.) |
| Software | Dedicated Windows-based application for SOP tracking, PM-fiber alignment, and Poincaré sphere visualization |
| Brand | TaiKun |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | LINCam |
| Instrument Type | Synchronized Scanning Streak Camera |
| Photocathode Material | GaAsP (not "钴ui" — corrected per standard industry nomenclature) |
| Photocathode Active Area | 0.2 mm² |
| Spectral Response Range | 300–900 nm |
| Timing Resolution | 40 ps FWHM |
| Spatial Resolution | 1000 × 1000 pixels |
| Detection Mode | Time-Correlated Single-Photon Counting (TCSPC) |
| Interface | PCIe 3.0 x8 |
| Trigger Input | SMA, LVDS-compatible |
| Software Support | Windows/Linux SDK, MATLAB & Python APIs |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing environment |
| Brand | TAITEC |
|---|---|
| Origin | Japan |
| Model | OD-Monitor A&S |
| Measurement Range | 0.00–2.55 OD / 0.00–9.99 OD |
| Resolution | 0.1 NTU (OD-equivalent) |
| Operating Temperature | +15°C to +50°C |
| Accuracy | ±0.5% to ±1.5% (at specified OD range) |
| Configuration | Benchtop Laboratory System |
| Detection Principle | Near-Infrared Transmittance (950 nm) |
| Output Interface | USB 2.0, RS-232C |
| Channel Capacity | 8-channel simultaneous measurement |
| Calibration | User-adjustable correction factor (0.01–2.55) referenced to E. coli OD₆₀₀ |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | TC-HIIIDPK |
| Pricing | Available Upon Request |
| Measurement Principle | Integrating Sphere (60 mm diameter) |
| Compliance | JIS K 6718, JIS K 7105, ASTM D1003 |
| Light Source | Tungsten-Halogen Lamp |
| Detector | Silicon Photodiode |
| Measuring Aperture | Ø10 mm |
| Display | Backlit LCD |
| Output | Built-in Thermal Printer |
| Measured Parameters | Total Transmittance (Tt %), Diffuse Transmittance (Td %), Specular Transmittance (Tp %), Haze (%), Max/Min/Average Statistics |
| A/D Adjustment | User-configurable reference voltage calibration |
| Power Supply | Stabilized DC source for measurement integrity |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TC-HIIIDPK |
| Pricing | Available Upon Request |
| Brand | TCT (Xiamen Tongchuang) |
|---|---|
| Model | Handset P2 |
| Type | Handheld Digital Refractometer |
| Origin | Fujian, China |
| Temperature Compensation | Yes (0–40 °C) |
| Display | LCD Digital |
| Measurement Range (Urea Concentration) | 0–51.0 wt% |
| Resolution (Urea) | 0.1 wt% |
| Accuracy (Urea) | ±0.2 wt% |
| Measurement Range (Refractive Index) | 1.3330–1.4200 nD |
| Resolution (nD) | 0.0001 nD |
| Accuracy (nD) | ±0.0003 nD |
| Power | 1 × AAA 1.5 V battery |
| Weight | 110 g (instrument only) |
| Dimensions | 121 × 58 × 25 mm |
| Compliance | GB 29518–2013 |
| External Light Inhibition (E.L.I.) Function | Yes |
| PC Software Interface | Yes |
| Optional Bluetooth Thermal Printer Support | Yes |
| Brand | TechnoTeam |
|---|---|
| Origin | Germany |
| Model | L3 |
| Brightness Stability | <1% per 100 h |
| Chromaticity Coordinate Stability | <1 nm (dominant wavelength) per 100 h |
| Operating Temperature Range | 15°C – 30°C |
| Spatial Non-Uniformity | <2% |
| Spectral Options | Red, Green, Blue, Yellow, Orange, White |
| Interface | USB (real-time monitoring of drive current, heatsink temperature, and operational hours) |
| Application Scope | Calibration of luminance meters, chroma meters, CCD/CMOS imaging systems, integrating spheres, and goniophotometers |
| Brand | TechnoTeam |
|---|---|
| Origin | Germany |
| Model | LMK 6 |
| Sensor Type | Scientific-grade CCD |
| Field of View | 2° (CIE 1931 Standard Observer) |
| Spatial Resolutions | 2464 × 2056 (LMK 6-5) |
| Dynamic Range | ~140 dB |
| Luminance Repeatability | < 0.1% |
| Chromaticity Repeatability (x,y) | < 0.0001 |
| Luminance Accuracy (A-source) | < ±3% |
| Chromaticity Accuracy (x,y, A-source) | < ±0.0020 |
| Trigger Support | Yes (for pulsed light sources) |
| Filter Options | CIE V′(λ) scotopic, C(λ) circadian, IR (780–1000 nm), BLH (blue-light hazard) |
| Brand | TechnoTeam |
|---|---|
| Origin | USA |
| Model | OL 770/771 |
| Spectral Range | 200–1700 nm |
| Wavelength Accuracy | ±0.25 nm |
| Sampling Rate | >25 spectra/s |
| Stray Light Suppression | <10⁻⁵ |
| Reflectance Coating | PTFE (>99% from 300–1700 nm) |
| Calibration Source | Integrated tungsten-halogen reference lamp |
| Compliance | CIE 127:2007 (Conditions A, B, and Total Flux), CIE 127.2, ISO/CIE 11664 (Colorimetry), ASTM E308, USP <857> (Photometric Testing) |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TS-7400TH |
| Price Range | USD 42,000 – 70,000 |
| Power Supply | Single-phase AC 200 V |
| Dimensions (W×D×H) | 600 mm × 1120 mm × 1560 mm |
| Weight | 270 kg |
| Throughput | Up to 1000 kg/hr |
| Detection Capability | Sub-100 µm black specks in transparent pellets |
| Illumination | Spherical LED lighting system |
| Camera Type | Linear CCD monochrome camera |
| Pixel Count | 7400 pixels |
| Minimum Resolvable Feature Size | 40 µm |
| Feed System | Vibratory feeder |
| Transport System | Drum-type conveyor |
| Separation Mechanism | Velocity-differential ejection via feed drum coordination |
| Ejection | 16-channel solenoid valves |
| Human-Machine Interface | 8.4-inch color touch panel |
| Optional | PC-based monitoring and data logging system |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TS-7500C |
| Price Range | USD 42,000 – 70,000 |
| Power Supply | Single-phase AC 200 V |
| Dimensions (W×D×H) | 600 mm × 1120 mm × 1560 mm |
| Weight | 270 kg |
| Throughput | Up to 1000 kg/hr |
| Illumination | Spherical LED lighting |
| Camera Type | Linear CCD full-color RGB camera |
| Effective Resolution | ≤40 µm |
| Feed Mechanism | Vibratory feeder + roller conveyor |
| Particle Separation Principle | Velocity-differential separation between feeder and roller |
| Ejection | 20-channel solenoid valves |
| Human-Machine Interface | 8.4-inch color touch panel |
| Optional | PC-based remote monitoring system |
| Brand | Teka |
|---|---|
| Origin | Germany |
| Model | KT04 |
| Measurement Principle | Transient Line Source Method (Needle Probe) |
| Thermal Conductivity Range | 0.1–10 W/(m·K) |
| Accuracy | ±2% |
| Repeatability | ±1.5% |
| Heating Current Accuracy | ±0.01% |
| Single Measurement Duration | 80 s (probe-dependent) |
| Max. Auto-Repeat Tests | 99 |
| Sample Temperature Range | −25 °C to +75 °C (up to +125 °C with optional probe) |
| Operating Ambient Temperature | 0–45 °C |
| Power Supply | 220–240 VAC, 50 Hz / 110–120 VAC, 60 Hz |
| Power Consumption | ~40 W |
| Dimensions (W×H×D) | 471 × 147 × 391 mm |
| Weight | 11 kg |
| Interface | RS232 serial or USB (via USB-to-serial adapter) |
| Sample Compatibility | Solids, granules, powders, viscous liquids |
| Probe Interchangeability | Yes |
| Real-time Temperature Drift Monitoring | Yes |
| Software-Controlled Operation | Yes |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Lasy633 |
| Key Components | Semiconductor Laser System with Integrated Iodine Absorption Cell and Active Stabilization Electronics |
| Output Power | >2 mW (fiber-coupled), >10 mW (free-space) |
| Tuning Range | ≥300 GHz (≈0.4 nm at 633 nm) |
| Frequency Stability | <5 MHz RMS over 10 min |
| Coherence Length | >50 m |
| Spectral Linewidth | <5 MHz |
| Tuning Resolution | 1 MHz |
| Wavelength Accuracy | ±1 nm (standard) |