Physical Property Testing Instruments
Filter
Showing 11041–11070 of 12269 results
| Brand | OEM / Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Control System | TEMI880 Color Touchscreen Programmable Controller (English/Chinese Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Protection Features | Compressor Overheat/Overcurrent/High-Pressure Protection |
| Standard Equipment | Dual-Layer Tempered Glass Viewing Window |
| Temperature/Humidity Control | Balanced Temperature and Humidity Control System (BTSC) |
| Operating Ambient | +5°C to +35°C |
| Heater | Nickel-Chromium Alloy Wire |
| Humidifier | Surface Evaporation Type |
| Blower | Centrifugal Fan |
| Airflow Pattern | Wide-Band Forced Circulation (Top-Out/Bottom-In) |
| Condensation Method | Air-Cooled |
| Refrigeration System | Hermetic “Tecumseh” (France) Compressor |
| Construction | Outer Shell: SUS304B Stainless Steel |
| Inner Chamber | Welded Austenitic Stainless Steel (Leak-Proof Seam Welding) |
| Sealing | Dual-Silicone Rubber Gasket at Door |
| Insulation | High-Density Mineral Wool (Low Thermal Conductivity) |
| Internal Fans | Axial-Flow Circulation Fans (Quantity Configured per Chamber Volume) |
| Cable Port | One φ50 mm Penetration Port (Left Wall) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-assembled) |
| Model | TX-500C |
| Price Range | USD 14,000 – 28,500 |
| Surface/Interfacial Tension Range | 1×10⁻⁶ – 100 mN/m |
| Measurement Resolution | 0.001 mm |
| Measurement Accuracy | ±0.1% of reading |
| Temperature Control Range | 0–100 °C |
| Temperature Accuracy | ±0.1 °C |
| Measurement Method | Rotating Drop |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TY-401A |
| Max Operating Temperature | 300 °C |
| Temperature Range | RT to 300 °C |
| Temperature Uniformity | ≤ ±1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Time (RT → 300 °C) | ≤60 min |
| Air Exchange Rate | 3–10 times/h |
| Internal Chamber Dimensions (W×H×D) | 450 × 450 × 500 mm |
| Turntable Speed | 11–12 rpm |
| Airflow Velocity | 0.5–1.5 m/s |
| Power Consumption | 2.2–4 kW |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TY-4020 |
| Impact Energy Range | 2 J, 4 J, 5 J, 7.5 J, 15 J, 25 J, 50 J |
| Impact Velocity | 2.9 m/s or 3.8 m/s |
| Pendulum Moment (Impact Constant) | 150° lift angle |
| Distance from Pendulum Center to Specimen Center | 221 mm / 380 mm (mechanical design) |
| Pendulum Lift Angle | 150° |
| Support Span Options | 40 mm, 60 mm, 70 mm, 95 mm |
| Support Blade Radius | R = 1 mm |
| Impact Blade Angle | 30° |
| Impact Blade Radius | R = 2.0 ± 0.5 mm |
| Angular Resolution | 0.01° (Omron rotary encoder) |
| Energy Resolution | 0.01 J |
| Display | Color TFT touchscreen (bilingual UI) |
| Data Storage | Up to 12 test records with auto-averaging |
| Output Units | J/m, kJ/m², kg·cm/cm, ft·lb/in |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TY-8000A 100 kN |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | 100 kN |
| Load Resolution | 1/500,000 FS |
| Load Accuracy | ≤ ±0.5% |
| Force Measurement Range | 0.4–100% FS |
| Deformation Measurement Range | 0.2–100% FS |
| Force Control Rate Range | 0.01–5% FS/s |
| Force Control Accuracy | ±1% of set value |
| Displacement Resolution | 0.001 mm |
| Crosshead Travel (excl. fixtures) | 1200 mm |
| Effective Width | 550 mm |
| Test Speed Range | 0.1–500 mm/min |
| Speed Accuracy | ≤ ±0.3% |
| Power Supply | 380 V, 1.6 kW |
| Dimensions (W×D×H) | 1150 × 700 × 2300 mm |
| Weight | 1000 kg |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TY8000B-50KN |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | 50 kN |
| Load Resolution | 1/60,000 |
| Load Accuracy | ≤ ±0.5% FS |
| Maximum Travel (excl. grips) | 900 mm |
| Effective Width | 400 mm |
| Test Speed Range | 10–260 mm/min |
| Speed Accuracy | ≤ ±0.8% |
| Displacement Resolution | 0.01 mm |
| Drive System | Stepper-Servo Motor + Ball Screw |
| Control Architecture | DSP + MCU Digital Controller |
| Power Supply | 220 V, 800 W |
| Dimensions (W×D×H) | 850 × 580 × 1900 mm |
| Weight | 480 kg |
| Brand | Tyler |
|---|---|
| Origin | USA |
| Model | RX-29-10 |
| Sieve Diameter | 200 mm (8") |
| Tap Frequency | 150 ± 10 taps/min |
| Rotary Speed | 278 ± 10 rpm |
| Timer Range | 0–99 min with 0.1-s increment |
| Compliance | ASTM E11-09, ISO 3310-1 |
| Dimensions (W×D×H) | 710 × 530 × 635 mm |
| Weight | 86 kg |
| Power Supply | 230 V, 50 Hz |
| Max. Sieve Stack | 6 full-height + 13 half-height sieves |
| Nominal Aperture Range | 20 µm – 125 mm |
| Brand | Tyler |
|---|---|
| Origin | USA |
| Model | RX-29-10 |
| Sieve Diameter | 200 mm (8") |
| Tap Frequency | 150 ± 10 taps/min |
| Rotary Speed | 278 ± 10 rpm |
| Timer Range | 0–99 min, 0.1-sec increment |
| Compliance | ASTM E11-09, ISO 3310-1, NIST-traceable calibration support |
| Dimensions (W×D×H) | 710 × 530 × 635 mm |
| Weight | 86 kg |
| Power Supply | 230 V, 50 Hz |
| Max. Sieve Stack Capacity | 6 full-height + 13 half-height sieves |
| Particle Size Range | 20 µm – 100 mm |
| Screen Mesh Options | 3.5–500 mesh (5.6 mm – 25 µm), including stainless steel, brass, polyester, nylon, and wet-sieving configurations |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-4021A |
| Impact Energies | 2.75 J, 5.5 J, 11 J, 22 J |
| Impact Velocity | 3.5 m/s |
| Pendulum Moment (Impact Constant) | 150° lift angle |
| Anvil-to-Striker Distance | 22 mm |
| Pendulum Pivot-to-Striker Distance | 335 mm |
| Striker Radius | R = 0.8 ± 0.2 mm |
| Display | Color TFT touchscreen (English/Chinese UI) |
| Angular Resolution | 0.01° (Omron rotary encoder) |
| Energy Resolution | 0.01 J |
| Data Storage | 24 test records with auto-averaging |
| Weight | 85 kg |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Brand | TYTESTER (TianYuan) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TY-8008 |
| Instrument Type | Drop Weight Impact Tester |
| Impact Energy Range | 3–15 kg·m (with hammer masses: 3, 4, 5, 6, 7, 8, 9, 10, 15 kg |
| mass tolerance | ±5 g) |
| Impact Velocity | Free-fall acceleration (g = 9.80665 m/s²) |
| Maximum Lift Height | 2000 mm (±2 mm height accuracy) |
| Hammer Head Options | Type A, B, C (Rockwell hardness ≥ HRC 54) |
| Fixture Inner Diameters | 40 ± 1.0 mm (Type C), 80 ± 2.0 mm (Type A), 130 ± 2.5 mm (Type B) |
| Test Table Dimensions | 500 × 400 mm |
| Control System | PLC + 10-inch TFT touch HMI |
| Drive Motor | Stepper motor with gear reducer |
| Power Supply | AC 220 V, 50 Hz |
| Operating Temperature | 10–35 °C |
| Environmental Requirements | Low-vibration, low-EMI environment |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| High-Temp Zone Range | 70–150 °C |
| Low-Temp Zone Range | –10 to –45 °C |
| Temperature Resolution | 0.1 °C |
| Control Accuracy | ±2 °C |
| Heating Time (RT → 150 °C) | ~35 min |
| Cooling Time (RT → –45 °C) | ~40 min |
| Transfer Time Between Zones | 10–20 s |
| Test Chamber Recovery Time | 5–15 min |
| Hot/Cold Bath Dimensions | 30 × 30 × 15 cm (D×W×H) |
| External Dimensions | 200 × 160 × 190 cm (D×W×H) |
| Construction Material | SUS#304 Stainless Steel |
| Insulation | Polyurethane Foam + High-Density Fiberglass |
| Refrigerant | R404A/R23 Dual-Circuit System |
| Controller | U-8226S Touchscreen PID Microprocessor |
| Origin | South Korea |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UFT |
| Price Range | USD 140,000 – 280,000 |
| Instrument Type | Ultra-High-Frequency Fatigue Tester |
| Maximum Test Load | Up to 1000 MPa Stress Amplitude |
| Frequency Range | 20 kHz ± 500 Hz |
| Unit Weight | 500 kg |
| Brand | UgCS |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | R4 |
| Measurement Principle | Pulsed-field fluxgate magnetometry |
| Magnet Type | Superconducting coil-based (auxiliary field generation) |
| Operating Temperature Range | −20 °C to +50 °C |
| Magnetic Field Range | ±75,000 nT (field-extensible) |
| Magnetic Moment Resolution | <150 pT |
| Temperature Ramp Rate | Up to 2 °C/min (within specified range) |
| Field Sweep Rate | Up to 200 Hz (programmable, field-extensible) |
| Sampling Rate | 200 Hz |
| Real-time Data Output Rate | 2 Hz |
| Onboard Storage | 2 GB SD card |
| Integrated Sensors | Triaxial fluxgate magnetometers, GPS receiver, 3-axis accelerometer |
| Weight | <1.2 kg (system-level, fully configured) |
| Brand | UGT |
|---|---|
| Origin | Germany |
| Model | SEDIMAT 4-12 |
| Standard Compliance | DIN ISO 11277, ASTM D422 (optional) |
| Sample Capacity | 12 samples per run |
| Fractionation Levels | 4 (F1–F4) or 2 (ASTM F1–F2) |
| Temperature Control | Precise 25 °C water bath |
| Automation | 4-axis robotic arm (X: 1290 mm, Y: 990 mm, Z1 stirring: 790 mm, Z2 pipetting: 490 mm) |
| Dimensions (L×W×H) | 2080 × 860 × 1940 mm |
| Weight | ~400 kg |
| Power Supply | CEE 16, 16 A, 3N/PE, AC 380 V / 50 Hz |
| Pipetting Accuracy | Depth- and time-synchronized sampling per ISO-defined intervals |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | UIC-5 |
| Pricing | Available Upon Request |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | UIC-4 |
| Construction | Copper alcohol cups (4 pcs) |
| Test Angle | 45° sample support fixture (1 set) |
| Brand | UIC |
|---|---|
| Model | 833 |
| Origin | USA |
| Type | Vapor Pressure Osmometer |
| Molecular Weight Range | 100–25,000 Da (in toluene) |
| Minimum Detectable Concentration | 5 × 10⁻⁵ mol/L (toluene) |
| Temperature Control Range | Ambient to 130 °C (with optional chiller for sub-ambient operation) |
| Response Time | 2–5 min per sample |
| Sample Volume | 0.25 mL |
| Sensor Current Settings | 5, 20, 100 µA |
| Output Signal | 0–200 mV analog |
| Solvent Compatibility | Toluene, benzene, chloroform, 1,2-dichloroethane, methylene chloride, acetone, dimethylformamide (DMF), pyridine, water |
| Power Requirement | 220 V, 50 Hz, 1 A |
| Construction | All-steel sealed chamber with dual precision mechanical syringes and bowl-shaped thermistor housing |
| Dimensions (Controller) | 22 × 24 × 17 cm (L×W×H) |
| (Sample Cell) | 23 × 23 × 27 cm (L×W×H) |
| Brand | PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-H03M |
| Instrument Type | Electromechanical Universal Testing Machine |
| Force Capacity Options | 10 N / 20 N / 50 N / 100 N / 200 N (single selection) |
| Control System | Full PC-based control with proprietary software |
| Force Resolution | 1/1,000,000 full scale |
| Force Accuracy | ±0.1% FS |
| Displacement Resolution | 1/1,000,000 full stroke |
| Displacement Accuracy | ±0.1% FS |
| Sampling Rate | 1000 Hz |
| Effective Stroke | 450 mm |
| Speed Range | 0.01–30 m/min (standard), upgradable to 60 m/min (1,000,000 mm/min) upon configuration |
| Sample Width | ≥50 mm |
| Safety & Stop Modes | Overload stop, emergency stop button, automatic rupture detection, auto-return, dual-end travel limit protection |
| Drive System | High-precision servo motor with ball screw and linear guide transmission |
| Dimensions (L×W×H) | 850 × 270 × 560 mm |
| Net Weight | ~45 kg |
| Power Supply | 220 V AC, 50–60 Hz |
| Rated Power | 400 W |
| Included Accessories | USB/RS232 interface cable, control software license, standard fixture set |
| Optional Fixtures | 90°/180° peel fixtures (small/large), coefficient-of-friction fixture, unwind force fixture, stainless steel test plates, consumables |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | –70°C to +180°C |
| Humidity Range | 5% to 98% RH |
| Minimum Achievable Humidity | ≤5% RH (at 25°C) |
| Control Accuracy | ±0.5°C / ±2% RH |
| Uniformity | ±1.5°C / ±3% RH |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Power Supply | 380 VAC, 3-phase, 50/60 Hz |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2012, MIL-STD-2164A, USP <1151> (Environmental Stress Screening Guidance) |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (Reference Only) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (Reference Only) |
| Temperature Range | –70°C to +150°C |
| Humidity Range | 20–98% RH |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,100 (approx. ¥22,000) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Brand | COFOMEGRA |
|---|---|
| Origin | Italy |
| Model | Ultramatic200 |
| Chamber Volume | 200 L |
| Max. Sample Size | 77 × 102 cm |
| Agitator Speed Range | 0–750 rpm (electronically controlled) |
| Power Supply | 220/380 V, single-phase, 50/60 Hz |
| Dimensions (L×W×D) | 2120 × 1500 × 1100 mm |
| Net Weight | 650 kg |
| Ventilation Duct Connection | Ø100 mm |
| Heating System | Integrated electric heater with optional chiller or water-cooling interface |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 650 (FOB) |
| Compliance | ASTM D2210, TAPPI T403, ISO 2759, GB/T 6545, JIS L1004/L1018/L1031, K6328, P8131/P8112 |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 650 (FOB Guangdong) |
| Compliance Standards | ISO 2759, GB/T 6545, ASTM D2210, TAPPI T403, JIS L1004/L1018/L1031, QB/T 1057 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +5°C to 60°C |
| Internal Chamber Dimensions | W120 × H50 × D100 cm |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic |
| Chamber Material | High-Purity Grey PVC (Acid- and Alkali-Resistant) |
| Heating System | Independent Ni-Cr Alloy Heaters |
| Temperature Sensor | PT100 Platinum Resistance Thermometer |
| Control System | LED Digital PID Controller with Dual-Channel Display |
| Safety Features | Circuit Breakers, Dual Overheat Protection (Electronic & Mechanical), Integrated Water Filtration, Preheated Salt Solution System |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Capacity Options | 1000 kg / 2000 kg / 5000 kg |
| Test Area | 1200 × 1200 mm (customizable) |
| Resolution | 1/10,000 |
| Display Units | kg, N, lbf |
| Test Speed | 10 ± 3 mm/min |
| Overall Dimensions | 1200 × 1000 × 1400 mm |
| Approx. Weight | 750 kg |
| Power Supply | 220 V AC, 50 Hz |
| Load Cell | High-precision explosion-proof load cell (US-sourced) |
| Drive System | Taiwan-made AC frequency-controlled motor |
| Motion Mechanism | Precision ball screw actuation |
| Control System | Microprocessor-based controller with real-time compression monitoring and automatic crush detection |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Capacity Options | 1000 kg / 2000 kg / 5000 kg |
| Test Area | 1200 mm × 1200 mm (customizable) |
| Overall Dimensions | 1200 mm × 1000 mm × 1400 mm |
| Resolution | 1/10,000 F.S. |
| Display Units | kg, N, lb |
| Compression Speed | 10 ± 3 mm/min |
| Weight | Approx. 750 kg |
| Power Supply | 220 V AC, 50 Hz |
| Load Cell | High-Precision Explosion-Proof Load Cell (U.S.-sourced) |
| Drive System | Taiwan-sourced AC Frequency-Controlled Motor |
| Actuation | Precision Ball Screw Vertical Movement |
| Control System | Microprocessor-Based Digital Controller with Thermal Printer Integration |