Physical Property Testing Instruments
Filter
Showing 11371–11400 of 12238 results
| Brand | Xufeng |
|---|---|
| Origin | Shanghai, China |
| Model | XF-5481 |
| Instrument Type | Multicell Capillary Viscometer |
| Viscosity Range | 2–7 mPa·s (cP) |
| Test Temperature | Up to 150 °C ±0.1 °C |
| Capillary Diameter | 0.15 mm |
| Capillary Length | 15–18 mm |
| Pressure Range | 350–3500 kPa (±0.1% control accuracy) |
| Sample Volume | 7–10 mL |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 420 × 360 × 830 mm |
| Weight | 26 kg |
| Compliant Standards | ASTM D5481, SH/T 0703 |
| Brand | Xutongyongfu |
|---|---|
| Model | XT-100 |
| Rated Output Voltage | 0–50 kV |
| Max Output Current | 3 A @ 50 kV |
| Rated Capacity | 150 kVA |
| Output Frequency | 50 Hz ±5% |
| Waveform Distortion Rate | <1.0% (sinusoidal) |
| Quality Factor (Q) | 30–80 |
| Continuous Duty Cycle | 15 min at full load |
| Operating Ambient | −10°C to +40°C, RH <90% (non-condensing) |
| Input Power | AC 220 V ±10%, 50 Hz ±1 Hz |
| Protection | Overcurrent auto-trip, zero-position interlock, audible/visual timer alarm (0–99.9 s) |
| Accuracy | ±0.5% |
| Compliance | GB 50150–91, DL/T 596–1996, DL/T 848.2–2004 |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XT-105 |
| Price Range | USD 1,400 – 7,000 (based on exchange rate and configuration) |
| Max Test Force | 50 kN |
| Force Loading Rate | 50 N/s |
| Platen Spacing | 300 mm |
| Platen Dimensions | 400 mm × 400 mm |
| Input Voltage | AC 220 V ±10%, 50 Hz |
| Output Voltage | AC 0–250 V (continuously adjustable) |
| Output Current | AC 0–10 A |
| Output Modes | Continuous & Triggered |
| Overcurrent Protection Thresholds | 4.5 A / 9 A |
| Weight | 16 kg |
| Dimensions (W×D×H) | 400 × 300 × 200 mm |
| Operating Temperature | −15 °C to +50 °C |
| Relative Humidity | ≤85% at 20 °C |
| Brand | Xutongyongfu |
|---|---|
| Model | XT-107A |
| Origin | Beijing, China |
| Power Supply | AC 220 V ±10%, 50 Hz ±1 Hz |
| Operating Temperature | −5 °C to +40 °C |
| Relative Humidity | ≤90% at +25 °C |
| Output Voltage Rating | DC 4.5 kV / AC 3 kV |
| Accuracy | ±1.5% |
| Rated Capacity | 2 kVA |
| Dimensions | 400 × 300 × 300 mm |
| Display | 4½-digit digital meters + embedded oscilloscope module |
| Safety Features | Zero-position interlock, overcurrent protection, timed audible/visual alarm |
| Input–Output Isolation | Galvanically isolated |
| Output Configuration | Rear-panel high-voltage AC/DC terminals |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XT-200 |
| Price Range | USD 7,000–14,000 (FOB) |
| Breakdown Voltage | 20 kV |
| AC Output | 6–15 kV (±1.5% accuracy) |
| DC Output | 10–25 kV (±1.5% accuracy) |
| Max Output Current | 550 mA (with compensating reactor) |
| Transformer Capacity | 1.0–1.5 kVA |
| Input Power | AC 220 V ±10%, 50 Hz ±1 Hz |
| Timer Range | 0–999 s (±0.5% accuracy) |
| Dimensions | 400 × 300 × 300 mm |
| Weight | 22 kg |
| Operating Temperature | −15 °C to +50 °C |
| Relative Humidity | ≤90% at +25 °C |
| Compliance | GB 50150–2006, DL/T 596–2005, DL/T 848.2–2004 |
| Brand | Xutongyongfu |
|---|---|
| Model | XT200 |
| Output Voltage (AC) | 10 kV (6 kV motor class), 15 kV (10 kV motor class) |
| Output Voltage (DC) | 15 kV (6 kV motor class), 25 kV (10 kV motor class) |
| Max Output Current | 550 mA (with compensating reactor) |
| Rated Transformer Capacity | 1.0–1.5 kVA |
| Input Power | AC 220 V ±10%, 50 Hz ±1 Hz |
| Display | Analog pointer meter |
| Voltage Accuracy | ±1.5% |
| Timing Range | 0–999 s (±0.5% accuracy) |
| Overcurrent Protection | 6.7 A |
| Zero-Position Interlock | Yes |
| Auto Trip on Timeout/Overcurrent | Yes |
| Dimensions (W×D×H) | 400 × 300 × 300 mm |
| Weight | 22 kg |
| Operating Temperature | –15 °C to +50 °C |
| Relative Humidity | ≤90% at +25 °C |
| Compliance | GB 50150–2006, DL/T 596–2005, DL/T 848.2–2004 |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | XT200-1 |
| Price Range | USD 7,000 – 14,000 (FOB) |
| AC Breakdown Voltage Output | Up to 15 kV (rms) |
| DC Breakdown Voltage Output | Up to 25 kV (dc) |
| Max. Output Current (with reactor compensation) | 550 mA |
| Rated Transformer Capacity | 1.0–1.5 kVA |
| Weight | 22 kg |
| Dimensions (W×D×H) | 400 × 300 × 300 mm |
| Operating Temperature | −15 °C to +50 °C |
| Relative Humidity | ≤90% at +25 °C |
| Compliance | GB 50150–2006, DL/T 596–2005, DL/T 848.2–2004 |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XT200-2 |
| Price Range | USD 7,000 – 14,000 (FOB) |
| Maximum Breakdown Voltage | 20 kV AC/DC |
| Output Current | Up to 550 mA (with compensating reactor) |
| Input Power | AC 220 V ±10%, 50 Hz ±1 Hz |
| Accuracy | ±1.5% of reading (voltage), ±0.5% (timer) |
| Timer Range | 0–999 s (selectable in seconds, minutes, hours) |
| Overcurrent Protection | 6.7 A |
| Operating Temperature | −15 °C to +50 °C |
| Relative Humidity | ≤90% at +25 °C |
| Dimensions | 400 × 300 × 300 mm |
| Weight | 22 kg |
| Compliance | GB 50150–2006, DL/T 596–2005, DL/T 848.2–2004 |
| Brand | Xuxin Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ST-1510 |
| Measurement Range | 2–200 mN/m |
| Resolution | 0.01 mN/m |
| Accuracy | ±0.1 mN/m |
| Temperature Display Range | 0–40 °C |
| Temperature Display Precision | ±0.1 °C |
| Measurement Method | Du Noüy Ring Method |
| Repeatability | ≤0.2% RSD |
| Power Consumption | ≤20 W |
| Operating Environment | 5–45 °C, 10–80% RH |
| Power Supply | 220 V ±10%, 50 Hz |
| Dimensions | 270 × 185 × 360 mm |
| Weight | 7.5 kg |
| Compliance Standard | GB/T 6541 (Petroleum Products — Determination of Interfacial Tension Between Oil and Water — Du Noüy Ring Method) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -20 °C to 130 °C |
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Humidity Fluctuation | ±2% RH |
| Chamber Models | OK-ZTH-408 (60×85×80 cm), OK-ZTH-800 (100×100×80 cm), OK-ZTH-1000 (100×100×100 cm) |
| Refrigeration | French Tecumseh hermetic compressor |
| Dryer Filter | USA Parker Hannifin (AEGO) |
| Oil Separator | China Guanya |
| Solenoid Valve | Italy Castel |
| Vibration Exciter | Japan ThreeBand coil bonding adhesive, IMV temperature sensors, Tohbu stainless mesh diaphragm |
| Power Amplifier | Siemens switches/contactors, Sanyo power modules, Motorola output devices, Fuji protective fuses |
| Cabinet Construction | A3 steel exterior with powder coating, SUS304 stainless steel interior, ultra-fine glass wool insulation |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance | GB/T 2423.5, GJB 150.18–1986 |
| Drive Type | Pneumatic + Electromagnetic Hybrid |
| Max Payload Capacity | Up to 2× Rated Load (Model-Dependent) |
| Platform Material | Monolithic Cast Aluminum Alloy |
| Guidance System | Chrome-Plated Precision Linear Rails |
| Impact Repeatability | ±0.5 mm (via Photoelectric Height Sensing) |
| Built-in Damping Base | High-Mass Isolation Substructure |
| Operating Mode | Sweep, Fixed-Frequency, Shock Pulse, Random Vibration (with Optional Controller) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Model | OK-ES-10 |
| Max. Load Capacity | 70 kg |
| Effective Table Size | 1.2 m × 1.1 m |
| Stroke (Peak-to-Peak Amplitude) | 25.4 mm |
| Speed Range | 60–300 rpm |
| Speed Resolution | ±1 rpm |
| Drive Motor | 1 HP DC Motor with Smooth Start |
| Transmission | Synchronous Silent Belt |
| Control Mode | DC Speed Regulation |
| Timer Range | 0 s – 99 h |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 230 kg |
| Base Construction | Heavy-Duty C-Channel Steel Frame with Anti-Vibration Rubber Mounts |
| Table Surface | Stainless Steel |
| Sample Fixation | Aluminum Fixture with Manual Knob Adjustment |
| Compliance Standards | ASTM D999, ISO 2247, EN 71-1, ISTA 3A/3E |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Frequency Range | 1–5000 Hz |
| Max Acceleration | <20 g |
| Max Displacement (p-p) | ≤5 mm |
| Load Capacity | 100 kg |
| Vibration Waveform | Sine (Half/Full Cycle) |
| Axes | Vertical + Horizontal (X/Y/Z orthogonal) |
| Control Modes | Fixed Frequency, Sweep, Programmable (15-segment), Logarithmic, Octave |
| Display Resolution | 0.01 Hz (frequency), ±0.1 Hz accuracy |
| Operating Temperature | 5–40 °C (24-hr avg ≤25 °C) |
| Humidity | ≤85% RH |
| Power Supply | AC 220 V ±10% / 50 Hz or AC 380 V ±10% / 50 Hz |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Y30 |
| Price Range | USD 7,000–14,000 |
| Temperature Range | 0–100 °C |
| Heating Rate | 0.1–10 °C/min |
| Temperature Repeatability | ±0.1 °C (at 0.1 °C/min heating rate) |
| Temperature Accuracy | ±0.3 °C (up to 100 °C) |
| Capillary Dimensions | OD 1.4 mm, ID 1.0 mm, L 100 mm (dual-open) |
| Sample Capacity | 2 samples per run |
| Temperature Resolution | 0.1 °C |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Y50 |
| Price Range | USD 7,000–14,000 |
| Temperature Range | 0–100 °C |
| Heating Rate | 0.1–10 °C/min |
| Temperature Repeatability | ±0.1 °C (at 0.1 °C/min) |
| Temperature Accuracy | ±0.3 °C (at ~100 °C) |
| Capillary Dimensions | OD 1.4 mm, ID 1.0 mm, L 100 mm (dual-open) |
| Sample Capacity | 2 samples per run |
| Temperature Resolution | 0.1 °C |
| Cooling Method | Forced-air convection |
| Display | 7-inch TFT high-definition color screen |
| Data Storage | 8 GB internal + microSD card (up to 128 GB) |
| Connectivity | USB 2.0, RS-232, Ethernet |
| User Accounts | 8 configurable roles with password protection |
| Compliance Standards | SNT 0801.5–1999, GB/T 24892–2010, GB/T 12766–2008 |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Y90 |
| Price Range | USD 1,400–2,800 |
| Temperature Range | 4–100 °C |
| Heating Rate | 0.1–10 °C/min |
| Temperature Repeatability | ±0.1 °C (at 0.1 °C/min) |
| Temperature Accuracy | ±0.3 °C (up to 100 °C) |
| Capillary Dimensions | OD 4 mm, ID 1.0 mm, L 100 mm (dual-open) |
| Sample Capacity | 2 samples per run |
| Temperature Resolution | 0.1 °C |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DKN313C |
| Instrument Type | Benchtop |
| Temperature Range | Ambient +10°C to 260°C |
| Temperature Uniformity | ±1.0°C (at setpoint) |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ~60 min (from ambient to 210°C) |
| Chamber Volume | 27 L |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (Reference Only) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Rapid TC Range | −45 °C to +85 °C or −20 °C to +85 °C |
| Ramp Rates | 5–25 °C/min (customizable) |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0% RH (at ≥75% RH) |
| Humidity Stability | ±2.5% RH |
| Interior Material | SUS#304 Stainless Steel |
| Refrigeration System | Hermetic Dual-Stage Compressor with Eco-Friendly Refrigerants (R404A/R23) |
| Controller | Touchscreen LCD with English/Chinese Interface |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-Phase 5-Wire |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | 300kN |
| Max Test Force | 300 kN |
| Force Measurement Range | 4–100% FS |
| Force Accuracy | ≤ ±1% |
| Stroke | 1,000 mm |
| Maximum Test Length (Gauge Length Extension) | 10 m |
| Piston Speed (No-Load) | ≥100 mm/min |
| Controlled Loading Speed | 0.5–80 mm/min |
| Control System | Electro-hydraulic servo with real-time PC-based closed-loop control |
| Display Interface | Industrial PC with LCD monitor and dedicated tensile testing software |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | 300kN Computer-Controlled Hydraulic Horizontal Tensile Testing Machine |
| Instrument Type | Hydraulic Tensile Testing Machine |
| Maximum Test Force | 300 kN |
| Force Measurement Range | 4–100% FS |
| Force Accuracy | ≤ ±1% FS |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CSL-1 |
| Sample Dimensions Supported | 10×10×55 mm, 10×7.5×55 mm, 10×5×55 mm |
| Notch Types | V-notch (GB/T 229–2007, ISO 148-1:2016 compliant) and U-notch (2 mm root radius, GB/T 229–2007) |
| Notching Stroke | 350 mm |
| Feed Rate | 2.5 mm/min |
| Overall Dimensions (L×W×H) | 350×350×700 mm |
| Net Weight | 80 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CST-50 |
| Projection Screen Size | 200 × 200 mm (graduated scale etched on optical glass) |
| Stage Dimensions | Square stage 110 × 125 mm |
| Stage Travel | Longitudinal ±10 mm, Transverse ±10 mm, Vertical ±12 mm |
| Stage Rotation | 0–360° continuous |
| Total Optical Magnification | 50× (Objective: 2.5×, Projection Lens: 20×) |
| Illumination Source | 12 V / 100 W halogen tungsten lamp |
| Power Supply | 220 V AC, 50 Hz |
| Overall Dimensions | 515 × 224 × 603 mm |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Type | Brinell Hardness Tester |
| Model | HBE-3000C |
| Measuring Range | 8–650 HBW |
| Test Forces | 62.5 kgf, 100 kgf, 125 kgf, 187.5 kgf, 250 kgf, 500 kgf, 750 kgf, 1000 kgf, 1500 kgf, 3000 kgf |
| Maximum Specimen Height | 220 mm |
| Depth from Indenter Center to Column | 155 mm |
| Test Space (H × D) | 235 mm × 155 mm |
| Indenter Diameters | 2.5 mm, 5 mm, 10 mm tungsten carbide balls |
| Eyepiece Magnification | 20× |
| Micrometer Eyepiece Resolution | 0.01 mm |
| Load Application | Motor-driven, closed-loop electronic force control |
| Dwell Time | 1–60 s (adjustable in 1 s increments) |
| Data Storage | Up to 30 test records |
| Hardness Scale Conversion | HRA, HRB, HRC, HRD, HEF, HK, HV, HR15N/30N/45N, HR15T/30T/45T, HBW |
| Compliance | GB/T 231.2, JJG 150 |
| Power Supply | AC 220 V |
| Dimensions (W × D × H) | 520 × 230 × 750 mm |
| Weight | ~130 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HBRVS-187.5 |
| Hardness Scales | Rockwell (HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK), Brinell (HBW 2.5/31.25, HBW 2.5/62.5, HBW 5/62.5, HBW 2.5/187.5), Vickers (HV30, HV100) |
| Test Forces | Rockwell — 588 N (60 kgf), 980 N (100 kgf), 1471 N (150 kgf) |
| Testing Space | 180 mm (H) × 160 mm (D) |
| Magnification | Brinell — 37.5×, Vickers — 75× |
| Max Specimen Height | 220 mm (Rockwell), 170 mm (Brinell/Vickers) |
| Dimensions (L×W×H) | 580 × 260 × 780 mm |
| Weight | ~80 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | HBS-3000L |
| Instrument Type | Brinell Hardness Tester |
| Hardness Range | 8–650 HBW |
| Total Test Forces | 62.5 kgf, 100 kgf, 125 kgf, 187.5 kgf, 250 kgf, 500 kgf, 750 kgf, 1000 kgf, 1500 kgf, 3000 kgf |
| Maximum Specimen Height | 235 mm |
| Depth from Indenter Center to Column | 155 mm |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Brinell Hardness Tester |
| Model | HBS-3000LZ |
| Measurement Range | 8–650 HBW |
| Test Forces | 62.5 kgf, 100 kgf, 125 kgf, 187.5 kgf, 250 kgf, 500 kgf, 750 kgf, 1000 kgf, 1500 kgf, 3000 kgf |
| Maximum Specimen Height | 225 mm |
| Depth of Throat | 135 mm |
| Vertical Clearance | 200 mm |
| Indenter Diameters | 2.5 mm, 5 mm, 10 mm tungsten carbide balls |
| Optical Magnification | 20× |
| Eyepiece Resolution | 0.564 µm |
| Load Application | Motor-driven closed-loop electronic force control |
| Dwell Time | 0–60 s (adjustable in 1-s increments) |
| Hardness Scale Conversion | HRB, HRC, HRA, HRD, HRF, HK, HV, HR15N/30N/45N, HR15T/30T/45T, HBW |
| Data Storage | Up to 30 test records |
| Compliance | GB/T 231.2, JJG 150 |
| Power Supply | AC 220 V |
| Dimensions (W×D×H) | 520 × 230 × 750 mm |
| Weight | ~130 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | HBS-62.5MZ |
| Instrument Type | Brinell Hardness Tester |
| Measurement Range | 4–650 HBW |
| Total Test Forces | 1 kgf, 2.5 kgf, 5 kgf, 10 kgf, 15.625 kgf, 25 kgf, 30 kgf, 31.25 kgf, 62.5 kgf |
| Test Space | 220 mm (H) × 130 mm (D) |
| Indentation Measurement Magnification | 50×, 100× |
| Dwell Time | 0–60 s (adjustable in 1 s increments) |
| Hardness Scale Conversions | 14 scales (HRA, HRB, HRC, HRD, HEF, HV, HK, HBW, HR15N, HR30N, HR45N, HR15T, HR30T, HR45T) |
| Compliance | GB/T 230.2, JJG 112 |
| Built-in Thermal Printer | Yes |
| Net Weight | ~40 kg |
| Dimensions (L×W×H) | 520 × 190 × 650 mm |
| Power Supply | AC 220 V / 50 Hz |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HBS-D3000M4.3 |
| Instrument Type | Brinell Hardness Tester |
| Measuring Range | 8–650 HBW |
| Test Force Levels | 62.5–3000 kgf (612.5–29,400 N) |
| Indentation Scales | HBW2.5/62.5 to HBW10/3000 |
| Dwell Time | 0–60 s (1 s increments) |
| Max Specimen Height | 250 mm |
| Distance from Indenter Center to Front Column | 155 mm |
| Field of View Diameter | 6 mm |
| Eyepiece Magnification | 20× |
| Eyepiece Graduation | 0.01 mm |
| Test Record Capacity | Up to 30 sets |
| Standard Compliance | GB/T 231.1, GB/T 231.2, JJG 150 |
| Hardness Scale Conversion | HRC, HV, HK, HBW, HRA, HRD, HR15N/30N/45N, HR15T/30T/45T, HRB, HRF |
| Display | Touchscreen interface with direct hardness readout |
| Power Supply | AC 220 V / 50 Hz |
| Dimensions (L×W×H) | 520 × 230 × 755 mm |
| Net Weight | 114.0 kg |
| Gross Weight | 139.5 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic (China) |
| Model | HBS-D3000M7 |
| Instrument Type | Brinell Hardness Tester |
| Measurement Range | 8–650 HBW |
| Test Force Levels | 62.5 kgf (612.5 N) to 3000 kgf (29,400 N) |
| Indentation Scales | HBW 2.5/62.5 to HBW 10/3000 |
| Hardness Conversion | HRC, HV, HK, HRA, HRD, HR15N–HR45N, HR15T–HR45T, HRB, HRF |
| Load Application | Fully Automatic (Loading–Dwell–Unloading) |
| Dwell Time | 0–60 s (1 s increments) |
| Optical Magnification | 20× Digital Eyepiece |
| Eyepiece Resolution | 0.5 µm |
| Specimen Max Height | 230 mm |
| Distance from Indenter Center to Chamber Wall | 155 mm |
| Data Storage | Up to 30 Test Records |
| Standard Conformance | GB/T 231.1, GB/T 231.2, JJG 150 |
| Power Supply | AC 220 V / 50 Hz |
| Dimensions (L×W×H) | 535 × 185 × 750 mm |
| Net Weight | 116.5 kg |
| Gross Weight | 142.0 kg |