- All
- Favorite
- Popular
- Most rated
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Domestic Origin | Yes |
| Model | SP-30 |
| Price Range | USD 28,000 – 42,500 |
| Batch Capacity | 30–1000 mL per cycle |
| Spray Freezing Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Integrated oil-free air compressor (4.2 m³/h, 0.2 kW, <50 dB(A)) |
| Drying Air Flow Rate | 0–330 m³/h (max), 686 Pa static pressure |
| Jet Cleaner (Needle Sweeper) | Pneumatically actuated, frequency adjustable (2.3 bar internal supply) |
| Total Power | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Origin | Shanghai |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SY-100 |
| Pricing | Available Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ST-20 |
| Pricing | Available Upon Request |
| Standard Throughput | 20 L/h (adjustable 5–40 L/h) |
| Minimum Batch Volume | 3–5 L |
| Max Sterilization Temp | 150 °C |
| Hold Time Options | 5 s, 15 s, 30 s (at 20 L/h) |
| Fill Temp Range | 20–90 °C |
| SIP Capability | Integrated |
| CIP Flow Rate | 400 L/h |
| Max System Pressure | 10 bar |
| Power Supply | 3-phase, 380 V, 10 kW |
| Dimensions (UHT Unit) | 1600 H × 1200 L × 950 W mm |
| CT-20 Aseptic Filling Chamber | HEPA Filtration Efficiency ≥99.999% @ 0.3 µm |
| Chamber Dimensions | 850 L × 660 W × 2100 H mm |
| Chamber Power | Single-phase, 220–240 V, 50 Hz, 0.25 kW |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | EX-TE-03 / EX-TE-05 / EX-TE-10 / EX-TE-30 / EX-TE-50 / EX-TE-100 |
| Capacity | 3–100 L |
| Design Pressure (Vessel) | 0.09 MPa |
| Design Pressure (Jacket) | 0.3–0.4 MPa |
| Heating Power | 3–15 kW |
| Agitation Power | 0.09–0.5 kW |
| Temperature Control Range | Ambient to 120 °C |
| Optional Ultrasonic Frequency | 15–60 kHz |
| Compliance | Designed for GLP-compliant R&D environments |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model | CF121 |
| Pricing | Available Upon Technical Inquiry |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | EX-TE |
| Pricing | Available Upon Request |
| Vessel Capacities | 3–100 L (6 Models: EX-TE-03 to EX-TE-100) |
| Design Pressure (Inner Vessel) | 0.09 MPa |
| Jacket Design Pressure | 0.3–0.4 MPa |
| Heating Power | 3–15 kW |
| Agitation Power | 0.09–0.5 kW |
| Temperature Control Range | Ambient to 120 °C |
| Optional Ultrasonic Frequency Range | 15–60 kHz (Pulsed or Continuous Mode) |
| Integrated Sensors | Real-time monitoring of extraction temperature, heating temperature, pH, vacuum level, agitation speed/type, and liquid level |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Fully Imported |
| Model | SE03.0V |
| Instrument Type | Floor-Standing Centrifuge |
| Speed Range | 10,000–30,000 rpm (Rated Max: 11,000 rpm) |
| Max RCF | 11,000 × g |
| Max Capacity | 5 L (per batch, with optional 10–1000 L/h continuous operation) |
| Dimensions (W×D×H) | 670 × 455 × 880 mm |
| Power Supply | 3-phase, 380 V, 50 Hz, 1.5 kW |
| Motor Protection | IP55, Class F Insulation, Thermal Overload Protection |
| Drum Material | High-Strength Stainless Steel (AISI 431 shaft, precision-machined disc stack in AISI 304), Dynamic Balance Grade G2.5 |
| Feed/Discharge | Sanitary 304 SS inlet tubing, pressure gauge, micro-controlled discharge valves |
| Compliance | CE-marked, designed per ISO 13485 principles for pharmaceutical process validation support |
| Typical Configuration | Horizontal-axis disc stack centrifuge with integrated 25/50 L feed & clarified product tanks |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | TS-NS |
| Pricing | Upon Request |
| Volumes | 5 L, 10 L, 20 L, 30 L, 50 L, 100 L |
| Heating Power | 5–20 kW |
| Jacket Pressure | 0.3–0.4 MPa |
| Internal Tank Pressure | 0.09 MPa |
| Extraction Temperature | 100 °C |
| Concentration Temperature Range | 40–80 °C |
| Stirring Motor Power | 0.09–0.40 kW |
| Condensing Area | 0.20–0.95 m² |
| Heating Surface Area | 0.20–0.95 m² |
| Vacuum Pump Power | 0.75–2.25 kW |
| Ultimate Vacuum | −0.05 to −0.08 MPa |
| Dimensions (L×W×H, mm) | 1500×1200×550 to 2200×1550×660 |
| Construction Material | SUS304 stainless steel, interior welds polished to 300-grit finish |
| Insulation | Triple-layer thermal insulation |
| CIP System | Integrated Clean-in-Place |
| Heating Method | Electric jacketed heating |
| Optional Ultrasound Frequencies | 15, 20, 28, 30, 35, 40, 50, 60 kHz |
| Compliance | Designed in accordance with GMP principles for pharmaceutical R&D environments |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | SY-100 |
| Pricing | Available Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | BX-10 |
| Pricing | Available Upon Request |
| Throughput | 100 L/h |
| Minimum Batch Volume | 1,000 mL |
| Pasteurization Temperature Range | 30–90 °C |
| Temperature Control Accuracy | ±1 °C |
| Filling Mode | Automated volumetric filling with liquid-level sensing |
| Compatible Containers | PET, PE, glass bottles, and heat-resistant flexible packaging |
| Safety Interlock | Filling disabled until product temperature reaches setpoint |
| Power Supply | 8.5 kW, 380 V AC, 3-phase 5-wire |
| Net Weight | 50 kg |
| Dimensions (L×W×H) | 550 × 450 × 500 mm |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ST-20 |
| Pricing | Upon Request |
| Standard Throughput | 20 L/h (adjustable 5–40 L/h) |
| Minimum Batch Volume | 3–5 L |
| Max Sterilization Temperature | 150 °C |
| Holding Time Options | 5 s, 15 s, 30 s (at 20 L/h) |
| Fill Temperature Range | 20–90 °C |
| SIP Capability | Yes |
| CIP Flow Rate | 400 L/h |
| Max System Pressure | 10 bar |
| Power Supply | 3-phase, 380 V, 10 kW |
| Dimensions (UHT Unit) | 1600 H × 1200 L × 950 W mm |
| Aseptic Filling Module (CT-20) | HEPA Filtration Efficiency ≥99.999% @ 0.3 µm |
| Cleanroom Class | ISO Class 5 (Fed. Std. 209E Class 100) |
| CT-20 Dimensions | 2100 H × 850 L × 660 W mm |
| CT-20 Power | Single-phase, 220–240 V, 50 Hz, 0.25 kW |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SP-1500 |
| Pricing | Available Upon Request |
| Evaporation Capacity | 1500 mL/h |
| Inlet Air Temperature Range | 30–280 °C |
| Outlet Air Temperature Range | 30–120 °C |
| Temperature Control Accuracy | ±1 °C |
| Drying Residence Time | 1.0–1.5 s |
| Feed Rate (Peristaltic Pump) | 30–2000 mL/h |
| Air Flow Rate | 0–330 m³/h (Max), Max Static Pressure: 686 Pa |
| Compressor Power | 0.2 kW, Air Output: 4.2 m³/h, Operating Pressure: 2–5 bar |
| Nozzle Type | Two-Fluid, Standard Orifice: 0.75 mm (Optional: 0.5–2.0 mm) |
| Atomization Direction | Co-current, Downward |
| Heating System Power | 3.5 kW |
| Electrical Supply | AC 220–240 V, 50/60 Hz, 13 A |
| Dimensions (L×W×H) | 650 × 500 × 1550 mm |
| Net Weight | 120 kg |
| Integrated Oil-Free Air Compressor | Noise Level < 50 dB(A) |
| Air Intake Filter | HEPA-Class Pre-Filter Included |
| Collection Efficiency | >95% of dried powder within a single particle size distribution band |
| (Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GL-20 |
| Pricing | Available Upon Request) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SP-1500 |
| Pricing | Upon Request |
| Evaporation Capacity | 1500 mL/h |
| Inlet Air Temperature Range | 30–280 °C |
| Outlet Air Temperature Range | 30–120 °C |
| Temperature Control Accuracy | ±1 °C |
| Drying Residence Time | 1.0–1.5 s |
| Feed Flow Rate (Peristaltic Pump) | 30–2000 mL/h |
| Airflow Volume | 0–330 m³/h |
| Air Pressure | Up to 686 Pa |
| Compressor Power | 0.2 kW |
| Compressed Air Output | 4.2 m³/h at 2–5 bar |
| Jet Cleaner (Needle) Frequency | Adjustable, driven by internal 2.3 bar compressed air supply |
| Nozzle Configuration | Standard dual-fluid nozzle (0.75 mm orifice), optional orifices 0.5–2.0 mm |
| Spray & Hot Air Flow Direction | Co-current, downward |
| Total Power Consumption | 3.5 kW |
| Electrical Supply | 220/240 V AC, 50/60 Hz, 13 A |
| Dimensions (L×W×H) | 650×500×1550 mm |
| Net Weight | 120 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | TS-NS |
| Capacity Options | 5 L, 10 L, 20 L, 30 L, 50 L, 100 L |
| Heating Power | 5–20 kW |
| Jacket Pressure | 0.3–0.4 MPa |
| Internal Vessel Pressure | 0.09 MPa |
| Extraction Temperature | Up to 100 °C |
| Concentration Temperature Range | 40–80 °C |
| Stirring Motor Power | 0.09–0.40 kW |
| Condensing Area | 0.20–0.95 m² |
| Heating Surface Area | 0.20–0.95 m² |
| Vacuum Pump Power | 0.75–2.25 kW |
| Ultimate Vacuum | −0.05 to −0.08 MPa |
| Dimensions (L×W×H mm) | 1500×1200×550 to 2200×1550×660 |
| Construction Material | SUS304 stainless steel, internal/external welds polished to 300-grit finish |
| Insulation | Triple-layer thermal insulation |
| CIP System | Integrated Clean-in-Place |
| Heating Method | Electric jacketed heating |
| Optional Ultrasound Frequencies | 15, 20, 28, 30, 35, 40, 50, 60 kHz |
| Compliance | Designed per GMP principles for pharmaceutical R&D environments |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | TS-NS |
| Quotation | Available Upon Request |
| Capacities | 5 / 10 / 20 / 30 / 50 / 100 L |
| Heating Power | 5–20 kW |
| Jacket Pressure | 0.3–0.4 MPa |
| Internal Vessel Pressure | 0.09 MPa |
| Extraction Temperature | Up to 100 °C |
| Concentration Temperature Range | 40–80 °C |
| Stirring Motor Power | 0.09–0.40 kW |
| Condensing Area | 0.20–0.95 m² |
| Heating Surface Area | 0.20–0.95 m² |
| Vacuum Pump Power | 0.75–2.25 kW |
| Ultimate Vacuum | −0.05 to −0.08 MPa |
| Ultrasonic Frequency Options | 15–60 kHz (selectable) |
| Construction Material | SUS304 stainless steel, 300-grit electropolished welds |
| Insulation | Triple-layer thermal insulation |
| CIP System | Integrated Clean-in-Place |
| Control System | Centralized PLC-based HMI interface |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | BX-10 |
| Pricing | Available Upon Request |
| Output Capacity | 100 L/h |
| Minimum Batch Volume | 1000 mL |
| Pasteurization Temperature Range | 30–90 °C |
| Temperature Control Accuracy | ±1 °C |
| Power Supply | 8.5 kW, 380 V, 3-phase 5-wire |
| Net Weight | 50 kg |
| Dimensions (L×W×H) | 550 × 450 × 500 mm |
| Fill Volume Control | Automatic, Level-Sensing Quantitative Filling |
| Compatible Packaging | PET bottles, PE bottles, glass bottles, heat-resistant flexible pouches |
| Safety Interlock | Fill cycle disabled until product temperature reaches setpoint |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SP-1500 |
| Pricing | Upon Request |
| Evaporation Capacity | 1500 mL/h |
| Inlet Air Temperature Range | 30–280 °C |
| Outlet Air Temperature Range | 30–120 °C |
| Temperature Control Accuracy | ±1 °C |
| Drying Residence Time | 1.0–1.5 s |
| Feed Rate (Peristaltic Pump) | 30–2000 mL/h |
| Air Flow Rate | 0–330 m³/h (Max), 686 Pa Max Static Pressure |
| Compressor Output | 4.2 m³/h @ 2–5 bar, 0.2 kW |
| Two-Fluid Nozzle Standard Orifice | 0.75 mm (Optional: 0.5–2.0 mm) |
| Jet Cleaner (Needle Clearing System) | Adjustable Frequency, Internal 2.3 bar Air Supply |
| Power Supply | 3.5 kW, AC 220/240 V, 50/60 Hz, 13 A |
| Dimensions (L×W×H) | 650 × 500 × 1550 mm |
| Net Weight | 120 kg |
| Noise Level | <50 dB(A) |
| Glass Construction | High-Borosilicate, Heat-Resistant, Transparent |
| Control Interface | Color LCD Touchscreen, Bilingual (English/Chinese), PID-Based Real-Time Temperature Regulation |
| Air Intake Filtration | Integrated HEPA-Class Pre-Filter |
| Safety Interlock | Heater activation disabled unless blower is operational |
| Origin | Italy |
|---|---|
| Type | Floor-Standing Disc Stack Centrifuge |
| Model | SE03.0V |
| Max Speed | 11,000 rpm |
| Max RCF | 11,000 × g |
| Capacity | 50–1,000 L/h (batch min. 10 L) |
| Dimensions (W×D×H) | 670 × 455 × 880 mm |
| Power Supply | 3-phase / 380 V / 50 Hz / 1.5 kW |
| Motor Protection | IP55, Class F Insulation with Thermal Overload Protection |
| Drum Material | High-Strength Stainless Steel (AISI 431 for spindle, AISI 304 for housing and discs) |
| Separation Efficiency | Fat content ≤ 0.05% in skim milk |
| Separation Modes | Two-phase (liquid–solid or liquid–liquid) and three-phase (liquid–liquid–solid) |
| Compliance | Designed to meet hygienic process equipment standards for food, pharmaceutical, and biotech applications |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | EX-TE-03 / EX-TE-05 / EX-TE-10 / EX-TE-30 / EX-TE-50 / EX-TE-100 |
| Capacity | 3–100 L |
| Design Pressure (Vessel) | 0.09 MPa |
| Design Pressure (Jacket) | 0.3–0.4 MPa |
| Heating Power | 3–15 kW |
| Stirring Power | 0.09–0.5 kW |
| Temperature Control | Integrated PID with Digital Display |
| Optional Ultrasonic Frequency Range | 15–60 kHz |
| Safety Features | Low-Level Liquid Protection, Dual-Temperature Monitoring, Expandable Multi-Unit Synchronization |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SP-300 |
| Price Range | USD 28,000 – 42,500 |
| Processing Capacity | 30–1000 mL per batch |
| Spray Freezing Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum Pressure (empty) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Built-in oil-free air compressor (4.2 m³/h, 0.2 kW, noise < 50 dB(A)) |
| Drying Air Flow | 0–330 m³/h, max. static pressure 686 Pa |
| Atomization Airflow | 5.5 m³/min |
| Jet Cleaner (Needle) Frequency | Variable, with integrated 2.3 bar compressed air supply |
| Power Input | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Control System | Full-color LCD touchscreen interface with real-time digital display of drying chamber temperature, peristaltic pump speed, fan frequency, needle purge frequency, and chamber pressure |
| Dual-mode Capability | Optional conversion to conventional hot-air spray dryer configuration |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ST-20 |
| Pricing | Upon Request |
| Standard Throughput | 20 L/h (adjustable 5–40 L/h) |
| Minimum Batch Volume | 3–5 L |
| Max Sterilization Temp | 150 °C |
| Hold Time Options | 5 s / 15 s / 30 s (at 20 L/h) |
| Fill Temp Range | 20–90 °C |
| In-line SIP Capability | Yes |
| In-line CIP Flow Rate | 400 L/h |
| Max System Pressure | 10 bar |
| PID Temperature Control Accuracy | ±0.5 °C |
| Power Supply | 3-phase, 380 V, 10 kW |
| Dimensions (UHT Unit) | 1600 H × 1200 L × 950 W mm |
| CT-20 Aseptic Filling Chamber | ISO Class 5 (Fed. Std. 209E Class 100), HEPA Filtration Efficiency: 99.999% @ 0.3 µm |
| Chamber Dimensions | 850 L × 660 W × 2100 H mm |
| Chamber Power | Single-phase, 220–240 V, 50 Hz, 0.25 kW |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SP-300000 |
| Price Range | USD 28,000–42,500 |
| Processing Capacity | 30–1000 mL per batch |
| Spray Freeze Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum Pressure (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Built-in oil-free air compressor (4.2 m³/h, 0.2 kW, noise < 50 dB(A)) |
| Drying Air Flow Rate | 0–330 m³/h (max), max static pressure 686 Pa |
| Jet Cleaner (Needle Probe) Frequency | Adjustable, integrated 2.3 bar air supply |
| Refrigeration System | Internal air-cooled hermetic compressor |
| Vacuum Connection | Standard ISO-KF 25/40 flange |
| Control Interface | 7-inch color LCD touchscreen, bilingual (English/Chinese), real-time display of drying chamber temperature, peristaltic pump speed, fan frequency, needle probe frequency, and chamber pressure |
| Power Supply | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Dual-Mode Capability | Upgradable to conventional hot-air spray dryer configuration |
Show next