- All
- Favorite
- Popular
- Most rated
| Brand | DLAB |
|---|---|
| Model | OS40-S / OS20-S |
| Origin | Beijing, China |
| Input Power | 120 W / 60 W |
| Output Power | 100 W / 50 W |
| Max. Stirring Volume (H₂O) | 40 L / 20 L |
| Speed Range | 0–2200 rpm |
| Speed Display Resolution | ±1 rpm |
| Max. Torque | 60 N·cm / 40 N·cm |
| Max. Viscosity | 50,000 mPa·s / 10,000 mPa·s |
| Chuck Capacity | 0.5–10 mm |
| Dimensions (W×H×D) | 83 × 220 × 186 mm |
| Weight | 2.8 kg / 2.6 kg |
| Protection Class | IP42 |
| Operating Temp. | 5–40 °C |
| Relative Humidity | ≤80 % |
| Safety Certifications | CE, cTUVus, FCC |
| Motor Type | Brushless DC Explosion-Proof Motor |
| Safety Features | Overload protection, short-circuit cutoff, speed anomaly detection, soft-start function |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MS-PA |
| Stirring Capacity | 3 L (H₂O) |
| Speed Range | 100–1500 rpm |
| Speed Display | Dual LED (Set & Actual) |
| Control System | Microprocessor-Based Closed-Loop Feedback |
| Housing | Flame-Retardant Fully Enclosed Plastic Enclosure |
| Plate Diameter | Ø135 mm (5") |
| Plate Material | High-Impact Polymer |
| Motor Type | Brushed DC Motor |
| Input Power | 5 W |
| Output Power | 3 W |
| Rated Power Consumption | 15 W |
| Voltage | 100–240 VAC, 50/60 Hz |
| IP Rating | IP42 (per DIN EN 60529) |
| Dimensions (W×D×H) | 150 × 260 × 80 mm |
| Weight | 1.8 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Max Stir Bar Length | 50 mm |
| Stirring Positions | 1 |
| Brand | DLAB |
|---|---|
| Model | D-500 |
| Rated Voltage | 220 V / 50 Hz |
| Input Power | 500 W |
| Output Power | 380 W |
| Speed Range | 10,000–30,000 rpm |
| Speed Control | 7-step continuous adjustment |
| Rotor Tip Speed | 22.7–36 m/s |
| Max. Viscosity | 10,000 mPa·s |
| Processing Volume (H₂O) | 10–40,000 mL |
| Material in Contact | 316L stainless steel / PTFE |
| Weight | 1.3 kg |
| Noise Level | 79 dB(A) |
| Ambient Temperature | 5–40 °C |
| Relative Humidity | ≤85% |
| Duty Cycle | Continuous (100%) |
| Ingress Protection | IP20 |
| Dimensions | 70 × 70 × 255 mm |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MS-M-S10 |
| Quotation | Upon Request |
| Stirring Positions | 10 |
| Max. Stirring Volume per Position (H₂O) | 0.4 L |
| Max. Stir Bar Length | 40 mm |
| Speed Range | 0–1100 rpm |
| Speed Display | Analog Scale |
| Motor Type | Brushless DC Motor |
| Input Power | 12 W |
| Output Power | 4 W |
| Rated Power Consumption | 20 W |
| Voltage | 200–240 VAC |
| Frequency | 50/60 Hz |
| Working Plate Dimensions | 180 × 450 mm |
| Plate Material | Stainless Steel with Silicone Resin Coating |
| Protection Class (DIN EN 60529) | IP42 |
| Dimensions (W×D×H) | 182 × 552 × 65 mm |
| Weight | 3.2 kg |
| Operating Ambient Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MS-H-S10 |
| Voltage | 220 VAC |
| Frequency | 50/60 Hz |
| Total Power | 490 W |
| Heating Power | 470 W |
| Heating Temperature Range | Ambient to 120 °C |
| Safety Cut-off Temperature | 140 °C |
| Number of Stirring Positions | 10 |
| Max. Volume per Position (H₂O) | 0.4 L |
| Total Max. Volume (H₂O) | 4 L |
| Stirring Position Spacing | 90 mm |
| Speed Range | 0–1100 rpm |
| Speed Display | Analog Scale |
| Speed Deviation per Position | ≤5% |
| Max. Stir Bar Length | 30 mm |
| Motor Type | Brushless DC |
| Motor Input Power | 12 W |
| Motor Output Power | 4 W |
| Workplate Material | Stainless Steel with Silicone Resin Coating |
| Workplate Dimensions | 180 × 450 mm |
| Overall Dimensions | 182 × 552 × 65 mm |
| Weight | 3.2 kg |
| Operating Ambient Temperature | 5–40 °C |
| Max. Relative Humidity | 80% |
| Ingress Protection | IP42 |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MX-RD-Pro |
| Speed Range | 10–70 rpm |
| Adjustable Tilt Angle | 0–90° |
| Capacity | 1.5–50 mL tubes |
| Timer Range | 1–1199 min |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Power Consumption | 40 W |
| Motor Type | DC motor |
| Display | Dual LCD (speed & time) |
| Operating Mode | Timed or Continuous |
| Dimensions (W×D×H) | 190 × 510 × 260 mm |
| Weight | 8 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Ingress Protection | IP21 |
| Brand | DLAB |
|---|---|
| Model | MS-S (Non-heating) / MS-H-S & MS-H-Pro (Heating) |
| Type | Benchtop Magnetic Stirrer |
| Power Supply | 220 VAC, 50/60 Hz |
| Max. Stirring Volume (H₂O) | 20 L |
| Speed Range | 0–1500 rpm (MS-S/MS-H-S), 100–1500 rpm (MS-S-Pro/MS-H-Pro) |
| Speed Display | Analog scale (MS-S/MS-H-S) or Backlit LCD (MS-S-Pro/MS-H-Pro) |
| Heating Power | 500 W (MS-H-S/MS-H-Pro) |
| Max. Heating Temp | 340 °C |
| Heating Rate (1 L H₂O) | 6 K/min |
| Temperature Display & Control | LCD with 0.1 °C resolution (MS-H-Pro) |
| Motor | Brushless DC (MS-S/MS-H-S) or Brushless Pancake Outer Rotor (MS-S-Pro/MS-H-Pro) |
| Motor Output Power | 10 W |
| Workplate Material | Stainless steel (non-heating models) or Enamel-coated steel (heating models) |
| Workplate Diameter | φ135 mm |
| Safety | Dual independent thermal cutoff circuits (trip at 350 °C plate surface temp), IP42 enclosure rating (MS-Pro series), automatic stir bar detection & recapture (MS-H-Pro/MS-S-Pro), residual heat warning display |
| Connectivity | RS232 interface for PC-based parameter configuration, data logging, and remote monitoring |
| Compliance | DIN EN 60529 (IP42), DIN 12878 (for external temperature probe interface), GLP-compatible audit trail via software |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | SK-O180-Pro / SK-L180-Pro |
| Drive Type | Brushless DC Motor |
| Orbit Diameter (O180-Pro) | 10 mm |
| Stroke Length (L180-Pro) | 4 mm |
| Max Load (with clamp) | 7.5 kg (O180-Pro) / 2.5 kg (L180-Pro) |
| Speed Range | 100–500 rpm (orbital), 100–350 rpm (linear) |
| Timer Range | 1–1199 min |
| Display | Dual-line LCD (speed & time) |
| Input Voltage | 100–240 VAC, 50/60 Hz |
| Power Consumption | 30 W |
| Protection Rating | IP21 |
| Interface | RS232 |
| Operating Environment | 5–40 °C, ≤80% RH |
| Dimensions (W×D×H) | 370×420×100 mm (O180-Pro), 300×340×100 mm (L180-Pro) |
| Weight | 13.5 kg (O180-Pro), 8.1 kg (L180-Pro) |
| Brand | DLAB |
|---|---|
| Model | SK-D3309-Pro |
| Type | 3D Orbital Shaker |
| Voltage | 100–240 VAC |
| Frequency | 50/60 Hz |
| Power Consumption | 50 W |
| Motor | DC Motor |
| Tilt Angle | 7° |
| Max Load Capacity | 5 kg |
| Speed Range | 10–70 rpm |
| Speed Display | LCD |
| Timer Function | Yes |
| Timer Display | LCD |
| Time Setting Range | 1–1199 min |
| Operation Modes | Timed / Continuous |
| Dimensions (D×W×H) | 430 × 360 × 106 mm |
| Net Weight | 9 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Ingress Protection Rating | IP21 |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MX-T6-Pro / MX-T6-S |
| Voltage | 100–240 VAC |
| Frequency | 50/60 Hz |
| Power | 30 W (MX-T6-Pro) / 25 W (MX-T6-S) |
| Motor | DC motor |
| Motion Modes | Orbital rolling + rocking |
| Amplitude | 24 mm |
| Max Load Capacity | 5 kg (MX-T6-Pro) / 4 kg (MX-T6-S) |
| Number of Rollers | 6 |
| Roller Length | 340 mm (MX-T6-Pro) / 280 mm (MX-T6-S) |
| Speed Range | 10–70 rpm (MX-T6-Pro) / 0–70 rpm (MX-T6-S) |
| Speed Display | LCD (MX-T6-Pro) / Analog scale (MX-T6-S) |
| Timer Function | Yes (MX-T6-Pro, 1–1199 min) / No (MX-T6-S) |
| Operation Modes | Timed or continuous (MX-T6-Pro) / Continuous only (MX-T6-S) |
| Dimensions (D×W×H) | 530×260×120 mm (MX-T6-Pro) / 450×260×120 mm (MX-T6-S) |
| Weight | 5.1 kg (MX-T6-Pro) / 4.5 kg (MX-T6-S) |
| Operating Ambient Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Ingress Protection | IP21 |
| Brand | DLAB |
|---|---|
| Model | MX-RL-Pro |
| Type | Rotary Mixer |
| Speed Range | 10–70 rpm |
| Adjustable Tilt Angle | 0–90° |
| Timer Range | 1–1199 min |
| Display | LCD (speed & time) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Power Consumption | 40 W |
| Motor Type | DC motor |
| Dimensions (D×W×H) | 510×190×260 mm |
| Weight | 8 kg |
| Operating Environment | 5–40 °C, ≤80% RH |
| Ingress Protection | IP21 |
| Sample Capacity | 1.5–50 mL tubes |
| Operation Modes | Timed or Continuous |
| Tube Holder Compatibility | Interchangeable fixtures for 1.5–50 mL centrifuge tubes |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MS-PB |
| Motor Type | DC |
| Input Power | 10 W |
| Output Power | 3 W |
| Voltage | 100–240 VAC, 50/60 Hz |
| Speed Range | 0–1500 rpm |
| Speed Display | Analog Scale |
| Max. Stirring Volume (H₂O) | 3 L |
| Max. Stir Bar Length | 50 mm |
| Plate Diameter | φ135 mm (5") |
| Plate Material | Flame-Retardant Plastic |
| Enclosure | Fully Enclosed Flame-Retardant Housing |
| IP Rating | IP42 |
| Dimensions (W×D×H) | 150 × 260 × 80 mm |
| Weight | 1.8 kg |
| Operating Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % RH |
| Stirring Positions | 1 |
| Compliance | DIN EN 60529 |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MS7-H550-Pro |
| Heating Temperature Range | Ambient to 550 °C |
| Max. Stirring Volume (H₂O) | 20 L |
| Stirring Speed Range | 100–1500 rpm |
| Speed Resolution | ±1 rpm |
| Plate Dimensions | 184 × 184 mm |
| Heating Area | 176 × 176 mm |
| Heating Power | 1000 W |
| Total Power Consumption | 1050 W |
| Motor Type | Brushless DC |
| Motor Output Power | 10 W |
| External Temperature Sensor | PT1000 (±0.2 °C accuracy) |
| On-Plate Temperature Accuracy | ±1 °C (<100 °C), ±1% (>100 °C) |
| Safety Cut-off Temperature | 580 °C |
| Residual Heat Warning Threshold | 50 °C |
| Enclosure Protection Rating | IP21 (per DIN EN 60529) |
| RS232 Interface | Yes |
| Display | Backlit LCD showing set/actual speed & temperature |
| Operating Environment | 5–40 °C, ≤80% RH |
| Weight | 4.3 kg |
| Dimensions (W×D×H) | 215 × 360 × 112 mm |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SK-R330-Pro |
| Voltage | 100–240 VAC |
| Frequency | 50/60 Hz |
| Power Consumption | 40 W |
| Motor Type | DC Motor |
| Rocking Angle | 9° |
| Max Load Capacity | 10 kg |
| Speed Range | 10–70 rpm |
| Speed Display | LCD |
| Timer Function | Yes |
| Timer Display | LCD |
| Timer Range | 1–1199 min |
| Operation Modes | Timed & Continuous |
| Dimensions (D×W×H) | 410 × 360 × 200 mm |
| Net Weight | 9 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% RH (non-condensing) |
| Ingress Protection Rating | IP21 |
| Brand | DLAB |
|---|---|
| Model | OS40-Pro / OS20-Pro |
| Motor Type | Brushless DC Explosion-Proof Motor |
| Max. Stirring Volume (H₂O) | 40 L / 20 L |
| Speed Range | 50–2200 rpm |
| Speed Accuracy | ±3 rpm |
| Speed Resolution | ±1 rpm |
| Max. Torque | 60 N·cm / 40 N·cm |
| Max. Viscosity | 50,000 mPa·s / 10,000 mPa·s |
| Chuck Capacity | 0.5–10 mm |
| Input Power | 120 W / 60 W |
| Output Power | 100 W / 50 W |
| Voltage | 100–240 VAC |
| Frequency | 50/60 Hz |
| Protection Rating | IP42 (DIN EN 60529) |
| Dimensions (W×H×D) | 83 × 220 × 186 mm |
| Weight | 2.8 kg / 2.6 kg |
| Ambient Temp | 5–40 °C |
| Relative Humidity | ≤80 % RH |
| RS232 Interface | Yes |
| Safety Certifications | CE, cTUVus, FCC |
| Brand | DLAB |
|---|---|
| Model | MX-M |
| Type | Orbital Microplate Shaker |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Rated Power | 20 W |
| Motor | Brushless DC |
| Orbit Diameter | 4.5 mm |
| Speed Range | 0–1500 rpm (single plate), 0–1000 rpm (dual plate) |
| Max Load Capacity (with fixture) | 0.5 kg |
| Dimensions (W×D×H) | 260 × 150 × 80 mm |
| Weight | 3 kg |
| Operating Temperature | 5–40 °C |
| Operating Humidity | ≤80% RH |
| Ingress Protection | IP21 |
| Display | Analog Speed Scale |
| Compliance | DIN EN 60529 |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MS7-H550-S |
| Heating Temperature Range | Room Temp to 550°C |
| Max. Stirring Volume (H₂O) | 10 L |
| Stirring Speed Range | 0–1500 rpm |
| Plate Dimensions | 184 × 184 mm |
| Heating Area | 176 × 176 mm |
| Heating Power | 1000 W |
| Total Power Consumption | 1030 W |
| Motor Type | Shaded-pole AC motor |
| Motor Output Power | 1.5 W |
| Input Voltage | 100–120 / 200–240 VAC, 50/60 Hz |
| Temperature Control Accuracy (with PT1000) | ±0.5°C |
| Temperature Display Resolution | ±1°C |
| Safety Cut-off Temperature | 580°C |
| Residual Heat Warning Threshold | 50°C |
| Enclosure Protection Rating | IP21 (per DIN EN 60529) |
| Plate Material | High-purity glass-ceramic |
| External Temperature Sensor | PT1000 (plug-and-play) |
| Dimensions (W×D×H) | 215 × 360 × 112 mm |
| Weight | 4.5 kg |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MS-H280-Pro |
| Heating Temperature Range | Ambient to 280 °C (±1 °C accuracy <100 °C |
| Temperature Control with External PT1000 Sensor | ±0.5 °C |
| Stirring Speed Range | 100–1500 rpm |
| Max. Stirring Volume (H₂O) | 3 L |
| Max. Stir Bar Length | 50 mm |
| Hotplate Diameter | φ135 mm |
| Heating Power | 500 W |
| Total Power Consumption | 515 W |
| Input Voltage | 200–240 VAC, 50/60 Hz |
| Motor Type | DC |
| Motor Output Power | 3 W |
| IP Rating | IP21 |
| Over-Temperature Safety Cut-off | 320 °C |
| Residual Heat Warning Threshold | 50 °C |
| Housing Material | Flame-Retardant Plastic (DIN/EN 60529 Compliant) |
| Dimensions (W×D×H) | 150 × 260 × 80 mm |
| Weight | 1.8 kg |
| Operating Environment | 5–40 °C, ≤80% RH |
| Certifications | CE, cTUVus, FCC |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MX-S / MX-F |
| Voltage | 220–230 VAC |
| Frequency | 50 Hz |
| Power Consumption | 60 W |
| Oscillation Mode | Orbital |
| Orbit Diameter | 4 mm |
| Speed Range (MX-S) | 0–2500 rpm |
| Speed Range (MX-F) | 2500 rpm (fixed) |
| Continuous Operation Duty Cycle | 100% |
| Dimensions (W×D×H) | 127 × 130 × 160 mm |
| Weight | 3.5 kg |
| Operating Temperature | 5–40 °C |
| Operating Humidity | ≤80% RH |
| Ingress Protection | IP21 |
| Motor Input Power | 58 W |
| Motor Output Power | 10 W |
| Speed Indication | Analog scale (MX-S only) |
| Operation Modes | Continuous or momentary (touch-start) |
| Base Material | Silicone-damped polymer housing |
| Bearing Design | Eccentric ball bearing assembly |
| Compatible Vessels | 0.5–15 mL microtubes, tubes & containers with diameter ≤99 mm |
| Adapter Options | VT1.1 standard head, VT1.3 universal circular head, tube-specific adapters (e.g., for Eppendorf® 1.5/2.0 mL tubes) |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Model | MS7-Pro |
| Stirring Capacity | 20 L (H₂O) |
| Plate Dimensions | 184 × 184 mm (7″ square) |
| Plate Material | Glass-Ceramic |
| Motor Type | Brushless DC Motor |
| Input Power | 18 W |
| Output Power | 10 W |
| Rated Power | 50 W |
| Voltage | 200–240 VAC |
| Frequency | 50/60 Hz |
| Speed Range | 100–1500 rpm |
| Speed Display | LCD (Resolution: ±1 rpm) |
| Max Stir Bar Length | 80 mm |
| Protection Rating | IP21 |
| Dimensions (W×D×H) | 215 × 360 × 112 mm |
| Weight | 5.3 kg |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % RH |
| Brand | DLAB |
|---|---|
| Model | D-160 |
| Type | Handheld High-Shear Rotational Homogenizer |
| Power Input/Output | 160 W / 110 W |
| Rated Voltage/Frequency | 220 V / 50 Hz |
| Speed Range | 8,000–30,000 rpm |
| Rotor Tip Speed | 6.3–14 m/s |
| Speed Settings | 6-step mechanical dial |
| Processing Volume (H₂O) | 0.1–50 mL (with DS-160/5 probe) or 1–250 mL (with DS-160/10 probe) |
| Max. Viscosity | 5,000 mPa·s |
| Wetted Materials | 316L stainless steel + PTFE |
| Weight | 0.6 kg |
| Noise Level | 72 dB(A) |
| Operating Ambient | 5–40 °C, ≤85% RH |
| Duty Cycle | Continuous (100%) |
| IP Rating | IP30 |
| Dimensions (D×W×H) | 46 × 55 × 230 mm |
Show next