- All
- Favorite
- Popular
- Most rated
| Brand | Agilent Technologies |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China-manufactured) |
| Model | 7820A |
| Instrument Type | Benchtop Laboratory Gas Chromatograph |
| Application Scope | General-purpose Analytical Chemistry |
| Detector Options | FID, TCD, FPD Plus, NPD, µECD |
| Injector Types | Split/Splitless, Packed Column, Purge-and-Trap, Headspace |
| Valve Configuration | Up to 3 Valves |
| Control Architecture | Full Electronic Pressure Control (EPC) from Injector to Detector |
| Software Interface | Compatible with OpenLab CDS and Third-party Data Systems |
| Regulatory Alignment | Designed for GLP/GMP environments |
| Brand | Agilent Technologies |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Regional Classification | Domestic (China) |
| Model | 8860 GC |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Scope | General-Purpose |
| Temperature Control Range | +8 °C above ambient to 425 °C |
| Maximum Ramp Rate | 75 °C/min |
| Cooling Rate | 300 °C to 50 °C in 5.7 min (at 25 °C ambient) |
| Brand | Agilent Technologies |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China-manufactured) |
| Model | 7820A VL |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Scope | General-purpose analysis |
| Control System | Electronic Pressure Control (EPC) at inlet |
| Detector Regulation | Electronic Pressure Regulation (EPR) for FID |
| Included Configuration Options | SSL/EPC inlet + FID/EPR detector |
| Software | OpenLab CDS VL |
| Brand | Agilent Technologies |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | 7890B |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Field | Petrochemical Industry |
| Heating/Cooling Rate | Enabled by Low Thermal Mass (LTM) modules for direct, rapid column heating and cooling |
| Compliance | Designed to support GLP/GMP workflows with audit-trail-capable data systems (when paired with OpenLab CDS or ChemStation software) |
| Brand | Agilent Technologies |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | 8850 |
| Instrument Type | Benchtop Laboratory Gas Chromatograph |
| Application Scope | General-Purpose |
| Oven Temperature Range | +4 °C above ambient to 430 °C |
| Maximum Ramp Rate | 300 °C/min (120 V standard oven: ≤120 °C/min |
| 120 V fast oven | ≤200 °C/min) |
| Cooling Rate | 350 °C → 50 °C in ≤2.5 min (ambient 22 °C) |
| Carrier Gas Pressure Control Resolution | 0.001 psi |
| Brand | Agilent Technologies |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China-manufactured) |
| Model | Intuvo 9000 |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Scope | General-purpose |
| Temperature Control Range | +10 °C above ambient to 450 °C |
| Maximum Ramp Rate | 250 °C/min |
| Cooling Performance | 450 °C to 50 °C in ≤3 min (ambient 22 °C) |
| Column Dimensions | Standard 0.18–0.53 mm ID capillaries |
| Detector Compatibility | FID, TCD, ECD, NPD, PID, and GC/MS interfaces |
| GC/MS Integration | Compatible with Agilent 5977, 7000, and 7010 mass spectrometers |
| Retention Time Reproducibility | <0.008% RSD |
| Peak Area Reproducibility | <1% RSD |
| Pressure Control Resolution | 0.001 psi |
| Microfluidic Flow Technology | Integrated Chip-based Flow Path (CFT) with backflush and split capability |
| Environmental Certification | My Green Lab ACT Label (Accountability, Consistency, Transparency) |
| Power Consumption | <50% of conventional GC systems |
| Footprint | 27 cm W × 69 cm D × 51 cm H |
| Brand | Agilent Technologies |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China-manufactured) |
| Model | 8890 GC |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Scope | General-purpose |
| Oven Temperature Range | +4 °C above ambient to 450 °C |
| Maximum Ramp Rate | 120 °C/min (75 °C/min with 120 V power supply) |
| Oven Cool-down | 4.0 min from 450 °C to 50 °C (ambient 22 °C) |
| Detector Options | FID, TCD, SCD, NCD, compatible with single-quadrupole, triple-quadrupole, and Q-TOF GC/MS platforms |
| Retention Time Reproducibility | <0.008% RSD |
| Peak Area Reproducibility | <0.5% RSD |
| Pressure Control Resolution | 0.001 psi |
| Dual-Tower Simultaneous Injection | Yes |
| Dimensions (W × D × H) | 58 cm × 51 cm × 49 cm |
| Microfluidic Flow Control Technology (CFT) | Fully integrated |
| Cryogenic Cooling Options | –80 °C (LN₂), –40 °C (CO₂) |
| Inlet Configurations | Up to 2 inlets + 10 valves |
| Environmental Certification | My Green Lab ACT Label (Accountability, Consistency, Transparency) |
Show next