- All
- Favorite
- Popular
- Most rated
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | PT-8600 |
| Instrument Type | Aqueous Sample Dedicated |
| Dimensions | 8U (19-inch Rack Mountable) |
| Sample Handling | Fully Automated Online Flow-through Sampling |
| Trap Configuration | Straight-Path Ambient-Temperature Trap |
| Thermal Management | Independent Trap Bake-out, Pre-heat & Desorption Control |
| Fluidic Architecture | Fully Enclosed Inert Gas/Liquid Path (Stainless Steel + PEEK) |
| Calibration & QC | Automated Internal Standard Addition (3× amber vials, 10-step volumetric precision), Auto Blank Analysis, Auto Dilution, Auto Calibration Curve Generation |
| System Intelligence | Programmable Cycle Timing, Real-time Foam Detection & Suppression, Zone-specific Temperature/Flow Optimization (Purge, Dry-Purge, Bake, Desorb), Modular Integrated Fluidics with Minimized Dead Volume |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Dual-Stage Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 20-Position Carousel |
| Heating Zones | Three Independent Zones (Desorption Chamber, Transfer Line, Injection Valve) |
| GC/GC-MS Compatibility | Universal Interface for Domestic & International Instruments |
| Regulatory Compliance | Designed to Support HJ 583–2010, HJ 644–2013, HJ 734–2014, GBZ/T 300.62–2017, GBZ/T 300.66–2017, GBZ/T 300.68–2017, HJ/T 400–2007, GB 50325–2020, GB 36246–2018, GB/T 18204.2–2014, GB/T 18883–2022 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Multifunctional Autosampler |
| Maximum Sample Positions | 16 |
| Standard Quantitative Loop Volume | 100 µL (customizable) |
| Leak Detection | Pre-valve-opening automated leak check |
| Flow Path Treatment | Passivated (inertized) tubing and valves |
| Cleaning Protocol | Software-controlled reverse-flush for all flow paths |
| Valve Architecture | Multi-position rotary valve |
| Control Interface | PC-based method programming with unattended operation (scheduled, repetitive, continuous injection) |
| [Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automated |
| Sample Tray Capacity | 80 positions |
| Vial Specification | 20 mL crimp-top headspace vials |
| Heating Zones | 10 independent temperature-controlled ovens |
| Optional Features | Vial agitation, needle heating, leak detection, PC-based control with real-time status monitoring, GC/GC-MS synchronization and bidirectional communication, audit-trail-enabled method logging] |
| [Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Domestic |
| Model | PT-8100 |
| Sample Tray Capacity | 100 positions |
| Sample Type Compatibility | Aqueous and Solid (Soil/Sediment) |
| Dual-Needle Architecture | Independent aqueous & solid sample pathways |
| Cryogenic Sample Cooling Option | Available |
| Automated Trap Bake-Out & Desorption | Yes |
| Automated Line Cleaning & Blank Analysis | Yes |
| Calibration Curve Automation | Up to 10 concentration levels |
| Methanol Extraction Module | Integrated for soil samples |
| Soil Heating Range | Up to 90 °C with variable-speed magnetic stirring |
| GC Trigger Interface | Configurable TTL/relay signal output |
| Software Control | PC-based method editor, queue management, real-time status monitoring, audit-trail-enabled logging] |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Dual-Stage Thermal Desorber |
| Automation Level | Fully Automatic |
| Sample Capacity | 150 Positions |
| Control Interface | 7-inch Industrial Touchscreen |
| Temperature Zones | 4 Independently Controlled (Desorption Zone, Injection Valve, Transfer Line, Secondary Desorption/Cold Trap) |
| Cooling Method | Electronic Refrigeration for Cold Trap |
| Motion Accuracy | ±0.01 mm (XYZ Robotic Arm) |
| Gas Flow Control | Mass Flow Controller (MFC) |
| Compliance | ASTM D6196, ISO 16017-1, US EPA TO-17, HJ 583–2010, HJ 644–2013, HJ 734–2014, GB/T 18883–2022, GB 50325–2020 |
| Brand | Zyuyou |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ATDS-20S Max |
| Instrument Type | Dual-Channel Secondary Thermal Desorber |
| Automation Level | Fully Automatic |
| Sample Capacity | 40 positions (2 × 20) |
| Compliance | HJ 644–2013, HJ/T 400–2007, GB/T 18883–2002, HJ 583–2010, HJ 734–2014, GB 50325–2020 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automated |
| Sample Tray Capacity | 10 positions |
| Vial Sizes Supported | 10 mL and 20 mL |
| Oven Temperature Range | Ambient to 240 °C (1 °C increments |
| Valve Temperature Range | Ambient to 220 °C (1 °C increments |
| Temperature Control Accuracy | < ±0.1 °C |
| Loop Volume | 10 mL |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ATDS-30A (Two-Stage) |
| Instrument Type | Two-stage Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 30 positions |
| Compliance | HJ 644–2013, HJ/T 400–2007, GB/T 18883–2002, HJ 583–2010, GB 50325–2020, HJ 734–2014 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | PT-7900D |
| Instrument Type | Water-and-Soil Integrated Purge and Trap System |
| Sample Tray Capacity | 30-position |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automated |
| Sample Tray Capacity | 40 positions |
| Vial Size Compatibility | 20 mL |
| Compliance | Designed for ASTM D6866, ISO 11843, USP <467>, and EPA Method 502.2/8240/8260B workflows |
| Safety Features | Over-temperature protection, auto-eject on power failure, real-time pressure/flow monitoring, electrical leakage protection |
| Interface | 7-inch capacitive touchscreen with method storage (up to 10 methods) |
| Sample Path Materials | SilcoNert®-treated stainless steel tubing and deactivated fused-silica sampling needle |
| [Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automated |
| Sample Capacity | 20 positions |
| Vial Size | 20 mL |
| Oven Temperature Range | Ambient +1°C to 220°C (1°C increment) |
| Valve Temperature Range | Ambient +1°C to 220°C (1°C increment) |
| Temperature Control Accuracy | ±0.1°C |
| Sample Introduction | Pressure-balanced loopless injection controlled by pressurization time and pressure |
| Software Control | PC-based method programming with real-time status animation |
| Compliance | Designed for ASTM D6866, ISO 11843, USP <467>, EP 2.4.24, and Chinese EPA/HJ standards] |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | PT-7900D-II |
| Instrument Type | Water & Soil Integrated Purge and Trap System |
| Sample Tray Capacity | 72 positions |
| Fluid Handling | Integrated Syringe Pump for Automated Liquid Addition |
| Temperature Control Zones | 7 (Sample Zone, Valve Oven, Purge Tube, Transfer Line, Cold Trap, Water Trap, Desorption Zone) |
| Desorption Ramp Rate | Up to 2000 °C/min |
| Gas Path Materials | Passivated Stainless Steel & PEEK |
| Valves | Imported Electromechanical Switching Valves |
| Pressure Monitoring | Digital Electronic Pressure Sensors |
| Flow Control | Mass Flow Controllers (MFCs) |
| User Interface | 7-inch Touchscreen with Real-time Status Visualization |
| Compliance Standards | ASTM D6866, EPA Methods 502.2, 524.2, 624, 8260D, 8270E |
| Safety Features | System Self-Check at Power-On, Over-Temperature Protection, Leak Detection, Electrical Leakage Protection |
| Cleaning Functions | Methanol Rinse, High-Temperature Water Rinse, Automated Back-Flush of Entire Gas Path |
| Sample Agitation | Motorized Stirring Module |
| Optional Purge Tube Configurations | U-shaped, 5 mL or 25 mL |
| GC/GC-MS Synchronization | Universal Trigger Interface for Major Chromatographic Platforms (Agilent, Thermo Fisher, Shimadzu, Waters, PerkinElmer) |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ATDS-30A (Single-Stage) |
| Instrument Type | Single-Stage Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 30 positions |
| Compliance Standards | GBZ/T 300–2017, HJ 583–2010, GB 50325–2020 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Single-Stage Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 10 positions |
| Compatible With | All domestic and imported gas chromatographs (GC) |
| Regulatory Compliance | HJ 583–2010, GB 50325–2020, GBZ/T 300–2017 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ATDS-20A (Single-Stage) |
| Instrument Type | Single-Stage Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 20 positions |
| Compliance Standards | HJ 583–2010, GB 50325–2020, GBZ/T 300–2017 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ATDS-20A Max |
| Instrument Type | Dual-Stage Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 20 Positions |
| Compliance Standards | HJ 644–2013, HJ/T 400–2007, GB/T 18883–2002, HJ 583–2010, GB 50325–2020, HJ 734–2014 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Two-Stage Thermal Desorber |
| Automation Level | Semi-Automatic |
| Primary Desorption Temperature Range | Ambient to 400 °C |
| Secondary Desorption Temperature Range | Ambient to 400 °C |
| Valve Injection Zone Temperature Range | Ambient to 220 °C (1 °C increments) |
| Transfer Line Temperature Range | Ambient to 260 °C (1 °C increments) |
| Cryo-Focusing Trap Temperature Range | Down to −30 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Analyte Recovery Rate | >98% |
| Sample Position Capacity | 1 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Dual-Channel Secondary Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 2 × 30 positions (60 total) |
| Heating Zones | 4 independent temperature-controlled zones (desorption oven, valve oven, transfer line, secondary desorption trap) |
| Compliance | Designed for GB/T, HJ, GBZ/T, and GB-series Chinese environmental & occupational health standards |
| Interface | GC-synchronized trigger output |
| Optional Accessories | Quartz-lined transfer lines for active compound analysis |
| Brand | ZHYSHEN |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Secondary Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 20 positions per channel (dual-channel, total 40 samples per batch) |
| Compliance | HJ 644–2013, HJ/T 400–2007, GB/T 18883–2002, HJ 583–2010, GB 50325–2020, HJ 734–2014 |
| Thermal Zones | Four independently controlled zones (primary desorption, valve oven, transfer line, secondary desorption) |
| Sample Tube Activation | Built-in programmable tube conditioning |
| GC Interface | Universal hardware interface for Agilent, Thermo Fisher, Shimadzu, PerkinElmer, and domestic GC systems |
| Optional Accessories | Ambient-temperature or cryo-cooled secondary desorption module, fused quartz transfer line, replaceable injection needle |
| Brand | Zoeyun |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Dual-Stage Thermal Desorber |
| Automation Level | Fully Automated |
| Sample Capacity | 64 Positions |
| Heating Zones | 4 Independent Zones (Desorption Chamber, Injection Valve, Transfer Line, Secondary Desorption Trap) |
| Cooling Method | Electronic Peltier Cooling (No Liquid Nitrogen Required) |
| Sample Tube Material Compatibility | Standard 1/4" OD Stainless Steel or Silica Tubes |
| Gas Flow Control | Mass Flow Controllers (MFCs) |
| Leak Detection | Automatic Tube Integrity Check |
| Interface | GC/GC-MS Synchronization with Start/Stop & Remote Control Signal Support |
| Software Features | Method Programming, Queue Management, Audit Trail, Event Logging, Tube Aging & Calibration Simulation |
| Compliance Standards | ASTM D6196, ISO 16017-1, US EPA TO-17, HJ 583–2010, HJ 644–2013, HJ 734–2014, GB/T 18883–2022, GB 50325–2020 |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Single-Stage Thermal Desorber |
| Automation Level | Semi-Automatic |
| Desorption Zone Temperature Range | Ambient to 400 °C (1 °C increments) |
| Valve & Injection Port Temperature Range | Ambient to 180 °C (1 °C increments, ~60 W heating power) |
| Transfer Line Temperature Range | Ambient to 200 °C (1 °C increments, ~40 W heating power) |
| Cold Trap Temperature Range | Down to −35 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Analyte Recovery Rate | ≥95% |
| Sample Capacity | 6 sample tubes + 1 activation tube |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Single-Stage Thermal Desorber |
| Automation Level | Semi-Automatic |
| Sample Position Count | 1 |
| Compliance | GB 50325-2020 (Indoor Air VOC/BTEX Analysis) |
| GC Interface | Universal Adapter for Major Imported GC Systems |
| Carrier Gas Integration | External Regulated Supply, Compatible with Native GC Carrier Gas |
| Sample Tube Format | Standard 6 mm OD × 89 mm Length Sorbent Tubes |
| Desorption Temperature Range | Ambient to 400 °C (Programmable) |
| Valve & Transfer Line Temp Control | Independent PID-Controlled Zones |
| Method Storage Capacity | 9 Predefined Methods |
| Remote Triggering | TTL/Relay Input Support for Synchronized GC Start |
| Brand | Zhongyi Yusheng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | HS-30 |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automated |
| Sample Tray Capacity | 30 positions |
| Vial Size | 20 mL |
Show next