ATAGO
Filter
Showing 61–90 of 591 results
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-ISα (Cat. No. 3700) |
| Measurement Principle | Critical Angle Refractometry |
| Measured Parameters | Refractive Index (nD), Brix (%), Concentration (% w/w or % w/v), Temperature |
| Refractive Index Range | 1.32000–1.49100 |
| Brix Range | 0.0–80.0% |
| Temperature Range | −15 to +160°C (5 to 320°F) |
| Refractive Index Resolution | 0.00001 |
| Brix Resolution | 0.01% or 0.1% (configurable) |
| Temperature Resolution | 0.1°C / 0.1°F |
| Refractive Index Accuracy | ±0.0002 |
| Brix Accuracy | ±0.1% |
| Temperature Accuracy | ±1°C / ±1°F |
| Automatic Temperature Compensation Range | 5–100°C |
| Output Signals | DC 4–20 mA (2-wire) or RS-232C |
| Power Supply | DC 24 V |
| Intrinsic Safety Certification | Ex ia IIB T3 Ga TA (IEC 60079-0, -11) |
| Enclosure Rating | IP67 |
| Process Connection | G1/2" or 3/4" NPT (optional flange mount) |
| Wetted Materials | Sapphire prism, 316L stainless steel body, EPDM or Viton® gasket options |
| Operating Pressure | ≤1.0 MPa (10 bar) |
| Response Time (T90) | < 5 s (typical, dependent on flow rate and thermal stability) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-ISα |
| Explosion Protection Rating | Ex ia IIB T3 Ga TA |
| Measurement Principle | Critical Angle Refraction |
| Measurable Parameters | Refractive Index (nD), Brix (% w/w), Concentration (%), Temperature |
| Refractive Index Range | 1.32000–1.49100 |
| Brix Range | 0.0–80.0% |
| Temperature Range | −15 to +160 °C |
| Refractive Index Resolution | 0.00001 |
| Brix Resolution | 0.01% or 0.1% (selectable) |
| Temperature Resolution | 0.1 °C |
| Refractive Index Accuracy | ±0.0002 |
| Brix Accuracy | ±0.1% |
| Temperature Accuracy | ±1 °C |
| ATC Range | 5–100 °C |
| Output Signals | DC 4–20 mA / RS-232C |
| Power Supply | DC 24 V |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-Isα |
| Catalog No. | 3700 |
| Measurement Parameters | Refractive Index (1.32000–1.49100), Brix (0.0–80.0%), Temperature (−15 to 160 °C) |
| Resolution | RI ±0.00001, Brix ±0.01% or ±0.1%, Temp ±0.1 °C |
| Accuracy | RI ±0.0002, Brix ±0.1%, Temp ±1 °C |
| ATC Range | 5–100 °C |
| Output | 4–20 mA DC or RS-232C |
| Power Supply | 24 V DC |
| Explosion Protection | Ex ia IIB T3 Ga TA |
| Compliance | ATEX, IECEx, EN 60079-0/-11 |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-ISα Series |
| Explosion Protection | Intrinsically Safe (IECEx/ATEX certified) |
| Measurement Principle | Critical Angle Refractometry |
| Operating Temperature Range | −10 to 60 °C (process fluid) |
| Process Connection | Clamp-type or flanged (DN25/DN40 options) |
| Output Signal | 4–20 mA (HART optional), RS-485 (Modbus RTU) |
| IP Rating | IP67 (sensor head), IP65 (transmitter) |
| Material | 316L stainless steel wetted parts |
| Brix Range | 0–95 % Brix (configurable) |
| Accuracy | ±0.1 % Brix (typical, at 20 °C, sucrose solution) |
| Repeatability | ±0.02 % Brix |
| Response Time (T90) | < 5 s |
| Certifications | IECEx ia IIC T4 Ga, ATEX II 1G Ex ia IIC T4 Ga, SIL2 per IEC 61508 |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-Isα-DMF |
| Explosion Protection Rating | Ex ia IIB T3 Ga TA |
| Measurement Principle | Refractive Index-Based Concentration Determination |
| Application | Real-time In-line DMF (N,N-Dimethylformamide) Solution Concentration Monitoring |
| Compliance | ATEX/IECEx Certified for Zone 0/1 Hazardous Areas |
| Enclosure Rating | IP67 |
| Process Connection | Clamp or Flange (DN25/DN40 Options Available) |
| Operating Temperature Range | −10 to 80 °C (Process Fluid) |
| Output Signal | 4–20 mA (HART Optional), RS-485 (Modbus RTU), Analog Voltage (0–5/0–10 V) |
| Material of Wetted Parts | 316L Stainless Steel, Sapphire Prism, FKM Seals |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-ISα-EG (Cat. No. 5708) |
| Refractive Index Range | 1.32000–1.49100 |
| EG Concentration Range | 0.0–53.0% w/w |
| Freeze Point Range | −50 to 0 °C (−58 to 32 °F) |
| Process Temperature Range | −15 to 160 °C (5 to 320 °F) |
| Refractive Index Resolution | 0.00001 |
| EG Concentration Resolution | 0.1% |
| Freeze Point Resolution | 1 °C / 1 °F |
| Temperature Resolution | 0.1 °C / 0.1 °F |
| Refractive Index Accuracy | ±0.0002 |
| EG Concentration Accuracy | ±0.4% |
| Freeze Point Accuracy | ±1 °C / ±1 °F |
| Temperature Accuracy | ±1 °C / ±1 °F |
| Temperature Compensation Range | 5–100 °C |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Certification | Intrinsically Safe (IECEx/ATEX Zone 0/1, Class I Div 1) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-Isα-EG |
| Explosion Protection Rating | Ex ia IIB T3 Ga TA |
| Measuring Principle | Refractive Index (RI) |
| RI Range | 1.32000–1.49100 |
| EG Concentration Range | 0.0–53.0% w/w |
| Freeze Point Range | −50 to 0 °C (−58 to 32 °F) |
| Process Temperature Range | −15 to 160 °C (5 to 320 °F) |
| RI Resolution | 0.00001 |
| EG Resolution | 0.1% |
| Freeze Point Resolution | 1 °C / 1 °F |
| Temperature Resolution | 0.1 °C / 0.1 °F |
| RI Accuracy | ±0.0002 |
| EG Concentration Accuracy | ±1.0% |
| Freeze Point Accuracy | ±1 °C / ±1 °F |
| Temperature Accuracy | ±1 °C / ±1 °F |
| Temp. Compensation Range | 5–100 °C |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | CM-Isα-Ethanol (V/V) |
| Product Type | Online Refractometer |
| Digital Display | Yes |
| Measurement Range | Refractive Index: 1.32000–1.49100 |
| Ethanol Concentration (v/v) | 0.0–53.0% |
| Accuracy | Refractive Index ±0.0002, Ethanol ±1.0% |
| Explosion Protection Rating | Ex ia IIB T3 Ga TA |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-Isα-Ethanol (W/W) |
| Explosion Protection Rating | Ex ia IIB T3 Ga TA |
| Measurement Principle | Refractive Index → Ethanol Mass Concentration (w/w%) |
| Compliance | ATEX, IECEx, UL 60079-0/-11 |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-Isα-IPA |
| Explosion Protection Rating | Ex ia IIB T3 Ga TA |
| Measurement Principle | Digital Refractometry |
| Application | Continuous In-Line IPA Aqueous Solution Concentration Monitoring |
| Compliance | ATEX/IECEx Certified for Zone 0/1 Hazardous Areas |
| Housing Material | 316L Stainless Steel |
| Process Connection | G1/2" or NPT 1/2" (customizable) |
| Operating Temperature Range | 0–80 °C (process fluid) |
| Pressure Rating | ≤1.0 MPa |
| Output Signal | 4–20 mA (HART optional), RS-485 (Modbus RTU), Ethernet/IP (optional) |
| Accuracy | ±0.1 wt% IPA (calibrated range: 0–100 wt%) |
| Repeatability | ±0.02 wt% IPA |
| Response Time (T90) | <3 seconds |
| IP Rating | IP67 |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-ISα-Methanol |
| Explosion Protection Rating | Ex ia IIB T3 Ga TA |
| Measurement Principle | Critical Angle Refractometry |
| Temperature Compensation | Automatic (PT1000 sensor integrated) |
| Output Signals | 4–20 mA (HART optional), RS-232C |
| Process Connection | DN25/DN40 flange or tri-clamp (SUS316L wetted parts) |
| Operating Temperature | –10 to +60 °C (process fluid) |
| IP Rating | IP67 (sensor head), IP65 (transmitter) |
| Compliance | ATEX Directive 2014/34/EU, IEC 60079-0, IEC 60079-11, ISO 21873-1 (for hazardous area instrumentation) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | CM-ISα-NMP |
| Product Type | In-Line Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Measurement Range | Refractive Index 1.32000–1.49100 |
| Accuracy | ±0.0002 RI |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-Isα-PG |
| Explosion Protection Rating | Ex ia IIB T3 Ga TA |
| Measurement Principle | Total Internal Reflection Refractometry |
| Output Signal | 4–20 mA / RS-485 (Modbus RTU) |
| Process Connection | DN25/DN40 Flange or Clamp |
| Operating Temperature | −10 to 70 °C (Process Fluid) |
| IP Rating | IP67 |
| Material | 316L Stainless Steel Housing & Sapphire Prism |
| Calibration Range | 0–100 wt% Propylene Glycol (refractive index 1.333–1.432) |
| Accuracy | ±0.1 wt% PG (typical, with temperature compensation) |
| Response Time | < 3 s (90% step change) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-TANKα (FER) |
| Product Type | Online Refractometer |
| Measurement Range | Brix 0.00–80.0% |
| Accuracy | ±0.1% Brix |
| Resolution | 0.01% Brix (0.00–9.99%), 0.1% Brix (≥10.0%) |
| Temperature Compensation Range | 5–100 °C |
| Measurement Time | ~1 s |
| Output | DC 2–20 mA / RS-232C |
| Prism Material | Synthetic Sapphire |
| Sample Cell Material | SUS316L |
| Power Consumption | 3 VA |
| Supply Voltage | DC 24 V |
| Ingress Protection Rating | IP67 |
| Dimensions (W×H×D) | 160 × 167 × 110 mm |
| Weight | 2.4 kg (main unit only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-TANKα-SW(FER) |
| Measurement Range | Salt (NaCl) 0.00–28.0% w/w |
| Temperature Range | −15 to +160 °C |
| Salt Resolution | 0.01% (0.00–9.99%), 0.1% (10.0–28.0) |
| Temperature Resolution | 1 °C |
| Salt Accuracy | ±0.1% |
| Temperature Accuracy | ±1 °C |
| Temperature Compensation Range | 5–100 °C |
| Output | DC 4–20 mA / RS-232C |
| Response Time | ~1 s |
| Power Supply | DC 24 V |
| Prism Material | Synthetic Sapphire |
| Sample Cell Material | SUS316L |
| Ingress Protection | IP67 |
| Dimensions | 160 × 167 × 110 mm |
| Weight | 2.4 kg (main unit only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-TANKα-Urea (FER) |
| Product Type | In-line Refractometer |
| Measurement Range | Urea 0.0–55.0% w/w |
| Accuracy | ±0.3% w/w |
| Temperature Range | −15 to +160 °C |
| Temperature Resolution | 1 °C |
| Urea Resolution | 0.1% w/w |
| Prism Material | Synthetic Sapphire |
| Sample Cell Material | SUS316L |
| Output | 4–20 mA DC / RS-232C |
| IP Rating | IP67 |
| Dimensions | 160 × 167 × 110 mm |
| Weight | 2.4 kg (main unit only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DD-7 |
| Type | Benchtop Differential Refractometer |
| Measurement Range | 0–2% (w/w) |
| Display | Digital LCD |
| Temperature Control | None |
| Temperature Stability | ±0.5 °C (ambient-dependent) |
| Compliance | CE-marked, ISO/IEC 17025-compatible operation environment |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DEC-2 Portable Digital Conductivity Meter |
| Measurement Range | 0.0–19.9 mS/cm |
| Resolution | 0.1 mS/cm |
| Accuracy | ±0.2 mS/cm (0.0–10.0 mS/cm), ±0.4 mS/cm (10.1–19.9 mS/cm) |
| Temperature Range | 0.0–50.0 °C with Automatic Temperature Compensation (ATC) |
| IP Rating | IP67 |
| Power | 4 × LR44 button cells |
| Dimensions | 4.5 × 3.0 × 16.3 cm |
| Weight | 90 g (without accessories) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DEC-2 (Cat. No. 4340) |
| Instrument Type | Pocket-Sized Conductivity Pen |
| Parameter Type | Single-Parameter (Conductivity) |
| Measurement Range | 0.0 to 19.9 mS/cm |
| Resolution | 0.1 mS/cm |
| Accuracy | ±0.2 mS/cm (0.0–10.0 mS/cm), ±0.4 mS/cm (10.1–19.9 mS/cm) |
| Temperature Range | 0.0–50.0 °C with Automatic Temperature Compensation (ATC) |
| IP Rating | IP67 |
| Calibration Standard | 0.71 g/100 g NaCl solution |
| Power Source | 4 × LR44 button cells |
| Dimensions | 4.5 × 3.0 × 16.3 cm |
| Weight | 90 g (without accessories) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| Measurement Parameters | TPM (% w/w) and Acid Value (mg KOH/g oil) |
| Compliance | Designed for GB 7102.1–2003, ISO 8534, AOCS Cd 3d-63 |
| Interface | NFC (Android-compatible), USB-C data export |
| Construction | Titanium alloy housing |
| Operating Distance | ≥30 cm from hot oil surface |
| Intended Use | On-site frying oil monitoring in food service, regulatory inspection, and QC laboratories |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 (Edible Oil TPM & Acid Value Analyzer) |
| Measurement Parameters | TPM (%), Acid Value (mg KOH/g) |
| Compliance | Designed for GB 7102.1–2003, ISO 660, AOCS Cd 3d-63 |
| Interface | NFC (Android-compatible), USB-C data export |
| Construction | Titanium alloy housing |
| Safety Distance | ≥30 cm during measurement |
| Weight | <350 g |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| TPM Range | 0.5–40.0% |
| AV Range | 0.00–9.99 |
| Temperature Range | 0–225°C |
| TPM Accuracy | ±2.0% (20–200°C) |
| AV Accuracy | ±0.2 |
| Temperature Accuracy | ±1°C |
| TPM Resolution | 0.5% |
| AV Resolution | 0.01 |
| Temp. Resolution | 1°C |
| IP Rating | IP67 |
| Power | 2×AAA alkaline batteries |
| Dimensions | Ø22×490 mm |
| Weight | 400 g (host only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| Measurement Parameters | TPM% (0.5–40.0%), AV (0.00–9.99), Temperature (0–225°C / 32–437°F) |
| Accuracy | TPM ±2.0% (20–200°C), AV ±0.2, Temp ±1°C |
| Resolution | TPM 0.5%, AV 0.01, Temp 1°C |
| IP Rating | IP67 |
| Power | 2×AAA alkaline batteries |
| Dimensions & Weight | Ø22×490 mm, 400 g (host only) |
| NFC | Android-compatible near-field communication |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 Frying Oil Analyzer |
| Measurement Parameters | Total Polar Materials (TPM) % and Acid Value (AV) |
| Principle | Dielectric Constant-Based Non-Destructive Detection |
| Sample Contact | Immersion Probe (30 cm Handle for Operator Safety) |
| Compliance | Designed for ISO 8534, AOCS Cd 19a-99, and EU Regulation (EU) No 1881/2006 Monitoring Guidance |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 (9341) + AOM-03 Test Strips (9351) |
| Measurement Range | TPM 0.5–40% |
| Temperature Display Range | 0–225°C (32–437°F) |
| Temperature Accuracy | ±2.0°C (20–190°C), ±3.0°C (full range) |
| TPM Resolution | 0.5% |
| AV Resolution | 0.01 |
| TPM Accuracy | ±2.0% (20–190°C), ±3.0% (full range) |
| Measurement Method | Immersion-based electrochemical/optical strip assay |
| Temperature Compensation | Automatic digital compensation |
| Data Interface | NFC-enabled wireless transfer to iOS/Android devices |
| Compliance | Designed for routine QC in food service, compliant with JIS Z 8401 and ISO 8655-6 principles for volumetric accuracy of test strip readers |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| Measurement Parameters | Total Polar Materials (TPM) and Acid Value (AV) |
| Principle | Refractive Index–Based Correlation with TPM & Potentiometric Titration–Derived AV |
| Temperature Compensation | Automatic (ATC, 0–100°C) |
| Power Source | Rechargeable Lithium-ion Battery |
| Dimensions | 168 × 82 × 42 mm |
| Weight | Approx. 320 g |
| Compliance | Meets JIS K 2501, ISO 8534, and aligns with EU Regulation (EU) No 1881/2006 for polar compound limits in frying oils |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| Measurement Parameters | TPM (%) and Acid Value (mg KOH/g) |
| Compliance | Designed to support verification against GB/T 7102.1–2003, EU Regulation (EC) No. 156/2013, and Codex Alimentarius standards for frying oil safety |
| Construction | Titanium alloy housing |
| Connectivity | NFC (Android-compatible), USB-C data export |
| Operating Distance | Non-contact measurement at ~30 cm |
| Weight | <250 g |
| Power | Rechargeable Li-ion battery (≥8 hours continuous use) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DPH-2 |
| Instrument Type | Portable pH Meter |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | 0.0 to 14.0 pH |
| Resolution | 0.1 pH |
| Accuracy | ±0.1 pH (at 2.0–12.0 pH, 25°C) |
| Calibration Points | 3-point (pH 4.0, 7.0, 10.0) |
| Temperature Compensation | Automatic (ATC), 0–50°C |
| Power Supply | Four LR44 button cells (1.5 V each) |
| Enclosure Rating | IP67 |
| Dimensions | 4.5 × 3.0 × 16.3 cm |
| Weight | 90 g (instrument only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DPH-2 Digital Portable pH Meter |
| Instrument Type | Pen-style pH Meter |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | 0.0 to 14.0 pH |
| Resolution | ±0.1 pH (2.0–12.0 pH) |
| Accuracy | ±0.1 pH (2.0–12.0 pH) |
| Temperature Range | 0.0–50.0 °C with Automatic Temperature Compensation (ATC) |
| Calibration Points | 4.0, 7.0, and 10.0 pH buffer solutions |
| Ingress Protection Rating | IP67 |
| Power Supply | Four LR44 button cells |
| Dimensions | 4.5 × 3.0 × 16.3 cm |
| Weight | 90 g (without accessories) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DPH-2 |
| Instrument Type | Portable |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | 0.0 to 14.0 pH |
| Resolution | 0.1 pH |
| Accuracy | ±0.1 pH (within 2.0–12.0 pH range) |
| Temperature Range | 0.0 to 50.0 °C with Automatic Temperature Compensation (ATC) |
| Protection Rating | IP67 |
| Power Supply | Four LR44 button cells |
| Dimensions | 45 × 30 × 163 mm |
| Weight | 90 g (body only) |