Kipp & Zonen
Filter
Showing 31–60 of 60 results
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | CMP6 |
| Spectral Range | 285–2800 nm |
| Sensitivity | 5–20 µV/W/m² |
| Response Time | 18 s |
| Zero Offset A | < 10 W/m² |
| Zero Offset B | < 4 W/m² |
| Directional Error (up to 80°, 1000 W/m² beam) | < 20 W/m² |
| Temperature Dependence of Sensitivity (−10 °C to +40 °C) | < 2 % |
| Operating Temperature Range | −40 °C to +80 °C |
| Maximum Irradiance | 2000 W/m² |
| Field of View | 180° |
| Output Signal | 0–20 mV (passive, no power required) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | CNR4 |
| Spectral Range (Shortwave) | 300–2800 nm |
| Spectral Range (Longwave) | 4500–42000 nm |
| Sensitivity | 5–20 µV/W/m² |
| Temperature Dependence of Sensitivity (−10 to +40 °C) | < 4 % |
| Response Time | < 18 s |
| Non-linearity Error | < 1 % |
| Operating Temperature Range | −40 to +80 °C |
| Ventilation Power (Optional CNF4) | 10 W |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | CUV5 |
| Spectral Range | 280–400 nm |
| Sensitivity | 300–500 µV/(W/m²) |
| Temperature Response | < −0.3 °C |
| Response Time | < 1 s |
| Non-linearity Error | < 1 % |
| Max Solar Irradiance | 400 W/m² |
| Operating Temperature | −40 to +80 °C |
| Directional Error (up to 80°, 1000 W/m² beam) | < 5 W/m² |
| Field of View | 180° |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | DustIQ |
| Type | Optical Soiling Monitor |
| Technology | Optical Scattering-Based Transmission Loss Measurement |
| Power Supply | 12–24 V DC |
| Operating Temperature | −40 °C to +70 °C |
| IP Rating | IP65 |
| Output Interface | RS-485 (Modbus RTU) |
| Dimensions | 120 × 120 × 65 mm |
| Weight | 0.85 kg |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | DustIQ |
| Power Supply | 12–24 V DC, 300 mA |
| Communication | RS-485 Modbus® RTU |
| IP Rating | IP67 |
| Cable Options | Standard 10 m UV-resistant cable (8-pin connector), optional 25 m or 50 m |
| Operating Temperature | –40 °C to +70 °C |
| Calibration | Factory-calibrated for glass surface soiling |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | LAS MkII |
| Aperture | 10 cm (100–1,000 m path) / 15 cm (250–4,500 m path) |
| Wavelength | 850 nm |
| Scintillation Bandwidth | 10⁻¹⁷–10⁻¹² m⁻²/³ |
| Power Supply | 12 VDC, 6 W (up to 54 W with heater enabled) |
| Dimensions | 400 × 300 × 240 mm (L×H×D) |
| Weight | 8.5 kg |
| Internal Processing | Cn², sensible heat flux (H), and derived turbulence parameters |
| Data Logging | Onboard non-volatile memory for multi-month storage |
| Interface | RS-232/422 digital, 0–2 V analog output |
| Software | EVATION® (real-time monitoring, post-processing, calibration support) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | METEON 2.0 |
| Storage Capacity | 3500 samples |
| Input Channels | 5 smart + 1 analog radiation sensors + 1 PV panel temperature sensor + 1 S0 kWh pulse input |
| Power Supply | Internal AA batteries (6) |
| Environmental Rating | Weather-resistant for outdoor deployment |
| Communication | USB, Bluetooth (METEON 2.0) |
| Compatibility | Modbus RTU, analog voltage/current (4–20 mA, 0–1 V, 0–5 V, 0–10 V) |
| Mounting Accessories | CVF4 ventilator, CMF1/CMF4 mounts, CMB1 universal mast bracket, CLF4 leveling fixture, AMPBOX signal conditioner, CM121B/C shading ring, anti-glare hood kit |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | NR Lite2 |
| Spectral Range | 200–100,000 nm |
| Sensitivity | 10 µV/W/m² |
| Response Time | < 20 s |
| Operating Temperature Range | -30 °C to +70 °C |
| Compliance | CE |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | RT1 |
| Sensor Type | Dual-channel digital pyranometer + backsheet temperature probe |
| Mounting | Corner-mount compatible with standard PV modules |
| Calibration Stability | ±2% uncertainty maintained for 5 years without recalibration |
| Output | RS-485 (Modbus RTU) or optional analog 4–20 mA |
| IP Rating | IP67 |
| Operating Temperature | −40 °C to +80 °C |
| Dimensions | 120 × 120 × 45 mm (L × W × H) |
| Weight | 320 g |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Model | SGR4 |
| Output Interface | Modbus® RS-485 & Enhanced Analog |
| Power Supply | 5–30 VDC |
| Field of View | 180° (Hemispherical) |
| Dome Material | Hard Carbon-Coated Silicon Dome |
| Thermal Stability | Dome-to-body coupling eliminates need for dome temperature measurement or shading |
| Desiccant Lifetime | ≥10 years |
| Warranty | 5 years |
| Optional Integration | CVF4 Ventilation Unit |
| Compliance | ISO 9060:2018 Class C (for pyrgeometers), WMO Guide to Instruments and Methods of Observation (CIMO) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SMP10 |
| Spectral Range | 285–2800 nm |
| Response Time (63%) | < 0.7 s |
| Response Time (95%) | < 2 s |
| Zero Offset A | < 7 W/m² |
| Zero Offset B | < 2 W/m² |
| Directional Error (up to 80°, 1000 W/m² beam) | < 10 W/m² |
| Temperature Dependence of Sensitivity (−40 °C to +70 °C) | < 0.3 %/°C |
| Analog Output (-V version) | 0–1 V |
| Analog Output (-A version) | 4–20 mA |
| Digital Output | 2-wire RS-485 Modbus® |
| Operating Voltage | 5–30 VDC |
| Integrated Desiccant Cartridge Lifetime | ≥10 years (sealed operation) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SMP12 |
| Spectral Range (50% points) | 285–2750 nm |
| Response Time (63%) | < 0.15 s |
| Response Time (95%) | < 0.5 s |
| Zero-Offset (thermal offset, full range) | < 3 W/m² |
| Directional Response (1000 W/m² beam irradiance, up to 80° zenith angle) | < 10 W/m² |
| Temperature Dependence of Sensitivity (−10 °C to +40 °C) | < 1 % |
| Temperature Dependence of Sensitivity (−40 °C to +70 °C) | < 2 % |
| Output Interface | 2-wire RS-485 Modbus® RTU |
| Supply Voltage | 10–30 VDC |
| Surge Protection | Level 2 on power input, Level 3 on RS-485 lines |
| Internal Desiccant Lifetime | ≥10 years (sealed enclosure) |
| Integrated Tilt Sensor & Humidity Monitor | Yes |
| Calibration Coefficient Stored in Memory | Yes |
| Digital Irradiance Output | Direct in W/m² |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SMP12 Pyranometer with Albedo Measurement Kit |
| Classification | ISO 9060:2018 Class A (Secondary Standard) |
| Spectral Range | 285–3000 nm |
| Response Time (95%) | < 1.5 s |
| Zero Offset (Thermal, 5 K/h) | ±1 W/m² |
| Non-linearity | < ±0.2 % (0–2000 W/m²) |
| Tilt Error | < ±1 % (0–90°, 1000 W/m²) |
| Operating Temperature | −40 °C to +80 °C |
| Output Signal | Analog (mV) and Digital (RS-485 / Modbus RTU) |
| Heating | Integrated dome heater (12–30 VDC, max 2.5 W) |
| Compliance | ISO 9060:2018 Class A, IEC 61724-1:2021, WMO Guide to Instruments (2022) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SMP12 |
| Accuracy Class | ISO 9060:2018 Class A |
| Spectral Range | 305–2800 nm |
| Response Time (95%) | < 0.5 s |
| Zero Offset (Thermal, 5 K/h) | < 3 W/m² |
| Tilt Dependency | < 1 % (0–90°) |
| Heating Power | 2 W (DC or AC) |
| Output Signal | Analog (0–1 V, 0–2.5 V, 0–5 V, 4–20 mA) + Digital (RS-485 Modbus RTU) |
| Operating Temperature | −40 to +80 °C |
| IP Rating | IP67 |
| Humidity Sensor | Integrated capacitive RH sensor (0–100 % RH, ±2 % RH accuracy) |
| Surge Protection | Enhanced 10 kA (8/20 µs) per IEC 61312 |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SMP22 |
| Spectral Range | 210–3600 nm |
| Response Time (63%) | < 0.5 s |
| Response Time (95%) | < 0.2 s |
| Zero Offset A | < 3 W/m² |
| Zero Offset B | < 1 W/m² |
| Directional Error (up to 80°, 1000 W/m² beam) | < 5 W/m² |
| Temperature Dependence of Sensitivity (−20 °C to +50 °C) | < 0.3 % |
| Analog Output (-V) | 0–1 V |
| Analog Output (-A) | 4–20 mA |
| Digital Output | 2-wire RS-485 |
| Supply Voltage | 5–30 VDC |
| Integrated Desiccant Lifetime | ≥10 years |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SMP3 |
| Spectral Range | 300–2800 nm |
| Response Time (63%) | < 1.5 s |
| Response Time (95%) | < 12 s |
| Zero Offset A | < 15 W/m² |
| Zero Offset B | < 5 W/m² |
| Directional Error (up to 80°, 1000 W/m² beam) | 20 W/m² |
| Temperature Dependence of Sensitivity (-20 °C to +50 °C) | < 2 % |
| Analog Output (-V version) | 0–1 V |
| Analog Output (-A version) | 4–20 mA |
| Digital Output | 2-wire RS-485 Modbus® RTU |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SMP6 |
| Spectral Range | 300–2800 nm |
| Response Time (63%) | < 1.5 s |
| Response Time (95%) | < 12 s |
| Zero Offset A | < 10 W/m² |
| Zero Offset B | < 4 W/m² |
| Directional Error (up to 80°, 1000 W/m² beam) | ±15 W/m² |
| Temperature Dependence of Sensitivity (−10 °C to +40 °C) | < 2 % |
| Analog Output (-V version) | 0–1 V |
| Analog Output (-A version) | 4–20 mA |
| Digital Output | 2-wire RS-485 Modbus® RTU |
| Operating Voltage | 5–30 VDC |
| Integrated Desiccant Lifetime | ≥10 years |
| Compliance | ISO 9060:2018 Secondary Standard (Class A) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SOLYS2 Solar Tracker |
| Tracking Accuracy | < 0.1° (passive) / < 0.02° (active with optional sun sensor) |
| Payload Capacity | 20 kg |
| Power Supply | 18–30 VDC or 90–264 VAC (50/60 Hz) |
| Operating Temperature | −20 to +50 °C (DC) / −40 to +50 °C (AC) |
| Tracker Dimensions | 50 × 34 × 38 cm |
| Tracker Weight | 23 kg |
| Tripod Weight | 5 kg |
| Communication Interface | Ethernet / Web-based UI |
| Drive Mechanism | Inverted toothed belt |
| Power Consumption | 21 W (typical), 13 W (nighttime), 100 W (with heater, AC only) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SOLYS2 |
| Tracking Accuracy | < 0.1° (passive) / < 0.02° (active with optional sun sensor) |
| Payload Capacity | 20 kg |
| Power Supply | 18–30 VDC or 90–264 VAC (50/60 Hz) |
| Operating Temperature | −20 to +50 °C (DC) / −40 to +50 °C (AC) |
| Enclosure Material | Cast aluminum with textured finish |
| Mounting | Integrated tripod base with leveling feet, azimuth adjustment, and bubble level |
| Communication Interface | Ethernet/Web interface |
| Drive Mechanism | Inverted-tooth belt drive |
| Power Consumption | 21 W (normal), 13 W (night), 100 W (with heater enabled, AC only) |
| Dimensions (tracker) | 50 × 34 × 38 cm |
| Weight (tracker) | 23 kg |
| Weight (tripod) | 5 kg |
| GPS Integration | Yes, auto-configures latitude, longitude, and UTC time |
| Software | Open-source firmware |
| Compliance | BSRN-compliant, designed for ISO 9072-1, ASTM G167, and IEC 61724-1 solar monitoring applications |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SP Lite2 |
| Measurement Principle | Silicon Photodiode-based Solar Irradiance Detection |
| Spectral Range | 400–1100 nm |
| Sensitivity | Approx. 10 µV per W/m² |
| Output Signal | Analog Voltage (0–10 mV or 0–5 V optional) |
| Operating Temperature | −40 °C to +80 °C |
| Response Time | < 1 s (95 %) |
| Zero Offset (Thermal) | < ±5 W/m² |
| Non-linearity | < ±1 % (0–1000 W/m²) |
| Tilt Error | < ±1 % (0–90° tilt, 1000 W/m²) |
| IP Rating | IP67 |
| Cable Length | 5 m standard (custom lengths available) |
| Calibration Traceability | NIST-traceable calibration certificate included |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SP Lite2 Pyranometer |
| Spectral Range | 400–1100 nm |
| Sensitivity | 60–100 µV/W/m² |
| Response Time (95%) | < 500 ns |
| Directional Error (up to 80°, 1000 W/m² beam) | < 10 W/m² |
| Temperature Response | < −0.15 %/°C |
| Operating Temperature Range | −40 °C to +80 °C |
| Maximum Irradiance | 2000 W/m² |
| Field of View | 180° |
| Output | Analog voltage (mV), calibrated for direct conversion to W/m² |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SP Lite2 |
| Spectral Range | 400–1100 nm |
| Sensitivity | 60–100 µV/W·m⁻² |
| Response Time (95%) | < 500 ns |
| Directional Error (up to 80°, 1000 W/m² beam) | < 10 W/m² |
| Temperature Response | < −0.15 %/°C |
| Operating Temperature Range | −40 °C to +80 °C |
| Maximum Irradiance | 2000 W/m² |
| Field of View | 180° |
| Output | Analog voltage (mV), proportional to irradiance |
| Calibration Certificate | Traceable to WRR (World Radiometric Reference) |
| Cable | Integrated high-quality yellow cable (5 m standard) |
| Mounting | Integrated leveling bubble and adjustment screws |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | X-LAS MkII / 160 GHz Microwave Scintillometer Integrated System |
| Path Length | 500 m – 10 km |
| Operating Frequency | 160.8 GHz (λ = 1.86 mm) |
| Transmit Power | >25 mW (with 50 dB attenuator) |
| Detection Bandwidth | 10 kHz |
| Power Supply | 12 VDC, max 50 W per unit (Rx: 20 W typ, Tx: 15 W typ) |
| Receiver Aperture | 300 mm |
| Dimensions (Rx) | 482.5 × 360 × 363 mm, 12 kg |
| Dimensions (Tx) | 482.5 × 360 × 363 mm, 10 kg |
| Data Output | Fiber-optic interface (to fiber-to-LAN converter), GPS-synchronized timestamping, VGA/USB×2/sub-D service port |
| Software | Integrated scintillation data acquisition, synchronization, and eddy-covariance–compatible flux computation |
| Brand | KIPP ZONEN |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RaZON+ Integrated Solar Monitoring System |
| Pricing | Available Upon Request |
| Tracking Accuracy | 0.2° (Passive) / <0.02° (Active with Optional Sun Sensor) |
| Power Supply | 24 V DC |
| Operating Temperature Range | -20 °C to +50 °C |
| Ingress Protection Rating | IP65 |
| Drive Mechanism | Gear-Driven |
| Communication Interfaces | RS-485 (Modbus® RTU/ASCII), Ethernet (RJ-45), Wi-Fi (Web-Based Interface) |
| Data Processing Interval | 1-minute Averaging |
| Detector Material | Fused Quartz (for Both DNI and DHI Sensors) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Rt1 |
| Output Interface | RS-485 Modbus® |
| Signal Cable | Pre-terminated 20 m shielded cable with IP68 waterproof connector |
| Compliance | ISO 9847 Annex A.3 (Field Calibration of Pyranometers by Comparison with Reference Instruments) |
| Operating Principle | Thermopile-based broadband solar irradiance measurement (285–3000 nm) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | SHP1 |
| Pricing | Upon Request |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | Solys 2AP |
| Tracking Accuracy | <0.1° (passive) / <0.02° (active, with optional sun sensor) |
| Torque | >40 Nm |
| Payload Capacity (balanced) | 65 kg |
| Maximum Angular Velocity | 1.8°/s |
| Maximum Angular Acceleration | 3.6°/s |
| Power Supply | 24 VDC or 115/230 VAC, 50/60 Hz |
| Power Consumption | 50 W (tracker), +100 W (optional heater) |
| Operating Temperature | 0–50 °C (standard) / –20–50 °C (with frost cover) / –50–50 °C (with frost cover + heater) |
| Dimensions (H×W×D) | 42 × 26 × 38 cm |
| Weight | 30 kg |
| Communication Interface | RS-232 |
| Software | Win2AP (PC-based, user-supplied) |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | LAS MkII ET |
| Measurement Principle | Optical Scintillometry (Large-Aperture Scintillometer) |
| Core Outputs | Latent Heat Flux (LvE), Evapotranspiration (ET), Sensible Heat Flux (H), Path-Averaged Turbulent Fluxes |
| Data Logger | COMBILOG (12 VDC, IP65 Stainless Steel Enclosure with Overvoltage Protection) |
| Radiation Sensor | NR Lite2 Net Radiometer |
| Meteorological Sensors | Dual-Height Air Temperature, Dual-Depth Soil Temperature, Anemometer & Wind Vane, Barometric Pressure Sensor |
| Mounting Mast | 4 m Telescopic Guyed Mast with Lightning Rod, Ground Plate, and Sensor Mounting Hardware |
| Software | EVATION® (Real-Time Monitoring, Post-Processing, CSV/NetCDF Export, Multi-Source Data Integration) |
| Compliance | Designed for Long-Term Field Deployment per IEC 60529 (IP65), ASTM E1371 (Scintillometer Performance), ISO 20607 (Micrometeorological Flux Measurements), GLP-Ready Data Logging Architecture |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Imported |
| Model | METEON 2.0 |
| Input Channels | Up to 5 smart + 1 analog Kipp & Zonen pyranometers/pyrheliometers |
| Additional Input | 1 Mencke & Tegtmeyer PV module temperature sensor |
| Display | Real-time irradiance (W/m²) and temperature (°C) |
| Communication | Modbus RTU over RS-485, analog voltage/current outputs |
| Power | Internal rechargeable battery + external 12 V DC input |
| Enclosure | IP65-rated rugged carry case with integrated mounting for sensors and cabling |
| Operating Temperature | −20 °C to +50 °C |
| Data Storage | Internal microSD card (up to 32 GB), configurable logging interval from 1 s to 24 h |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | SGR3 |
| Spectral Range | 4.4–50 µm |
| Response Time | <18 s |
| Zero Offset (B) | <5 W/m² |
| Temperature Dependence of Sensitivity (−20 to +50 °C) | <3% |
| Operating Temperature Range | −40 to +80 °C |
| Field of View | 150° |
| Analog Output | 4–20 mA or 0–1 V per W/m² |
| Window Heating Offset | 15 W/m² |
| Power Supply | 5–30 VDC |
| Communication Interface | RS-485 Modbus® |
| Desiccant Replacement Interval | ≥10 years |
| Directional Error | <5 W/m² |
| Temperature Correction Range | −40 to +80 °C |