Labthink
Filter
Showing 121–150 of 497 results
| Brand | Labthink |
|---|---|
| Model | C611B |
| Max. Test Force | 9 kN |
| Load Rate | 0–200 mm/min |
| Platen Spacing | 600 mm |
| Platen Dimensions | 600 × 600 × 610 mm |
| Force Accuracy | ±1% of reading (10–100% FS), ±0.1% FS (0–10% FS) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Stroke | 450 mm |
| Sample Height Range | 0–600 mm |
| Power Supply | AC 220 V ±10%, 50 Hz or AC 120 V ±10%, 60 Hz |
| Net Weight | 180 kg |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | C611B |
| Force Sensor Capacity | 3 × 9 kN |
| Force Accuracy | ±1% of reading (10–100% FS), ±0.1% FS (0–10% FS) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Test Speed Range | 0–200 mm/min (adjustable in integer steps) |
| Speed Accuracy | ±2% of set value |
| Maximum Travel | 450 mm |
| Specimen Height Range | 0–600 mm |
| Test Chamber Dimensions | 600 mm (L) × 600 mm (W) × 610 mm (H) |
| Overall Dimensions | 650 mm (L) × 810 mm (W) × 1620 mm (H) |
| Weight | 180 kg |
| Power Supply | AC 220 V ±10%, 50 Hz OR AC 120 V ±10%, 60 Hz (user-selectable) |
| Brand | Labthink |
|---|---|
| Model | C611B |
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Max Test Force | 9 kN |
| Load Rate Range | 0–200 mm/min (integer setting) |
| Platen Dimensions | 600 mm (L) × 600 mm (W) × 610 mm (H) |
| Test Chamber Clearance | 600 mm (L) × 600 mm (W) × 610 mm (H) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Speed Accuracy | ±2% of set value |
| Travel Range | 450 mm |
| Sample Height Capacity | 0–600 mm |
| Power Supply | AC 220 V ±10%, 50 Hz or AC 120 V ±10%, 60 Hz |
| Net Weight | 180 kg |
| Compliance Standards | ASTM D642, ASTM D4169, ISO 12048, TAPPI T804, JIS Z0212, GB/T 16491, GB/T 4857.4, QB/T 1048-2004 |
| Brand | Labthink |
|---|---|
| Model | C611B |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Price Range | USD 7,000 – 14,000 |
| Sensor Capacity | 9 kN (triple-load-cell configuration) |
| Force Accuracy | ±1% of reading (10–100% FS), ±0.1% FS (0–10% FS) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Test Speed | 0–200 mm/min (integer-step adjustable) |
| Speed Accuracy | ±2% of set value |
| Stroke | 450 mm |
| Specimen Height Range | 0–600 mm |
| Test Chamber Dimensions | 0.6 m (L) × 0.6 m (W) × 0.61 m (H) |
| Overall Dimensions | 0.65 m (L) × 0.81 m (W) × 1.62 m (H) |
| Power Supply | AC 220 V ±10%, 50 Hz OR AC 120 V ±10%, 60 Hz (user-selectable) |
| Net Weight | 180 kg |
| Compliance Standards | ASTM D642, ASTM D4169, TAPPI T804, ISO 12048, JIS Z0212, GB/T 16491, GB/T 4857.4, QB/T 1048–2004 |
| Brand | Labthink |
|---|---|
| Model | C611B |
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Max. Test Force | 9 kN |
| Load Rate Range | 0–200 mm/min |
| Platen Spacing | 0–600 mm |
| Platen Size | 450 mm × 450 mm |
| Force Accuracy | ±1% of reading (10–100% FS), ±0.1% FS (0–10% FS) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Stroke | 450 mm |
| Specimen Height Range | 0–600 mm |
| Test Chamber Dimensions | 600 mm (L) × 600 mm (W) × 610 mm (H) |
| Overall Dimensions | 650 mm (L) × 810 mm (W) × 1620 mm (H) |
| Weight | 180 kg |
| Power Supply | AC 220 V ±10%, 50 Hz or AC 120 V ±10%, 60 Hz (selectable) |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | C611M |
| Power Supply | AC 220 V ±10% 50 Hz / AC 120 V ±10% 60 Hz (selectable) |
| Load Capacity | 9 kN (triple-sensor configuration) |
| Force Accuracy | ±1% of reading (10–100% FS), ±0.1% FS (0–10% FS) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Test Speed Range | 0–200 mm/min (integer-settable) |
| Speed Accuracy | ±2% of set value |
| Maximum Travel | 450 mm |
| Specimen Height Range | 0–600 mm |
| Test Chamber Dimensions | 800 mm (L) × 800 mm (W) × 610 mm (H) |
| Overall Dimensions | 850 mm (L) × 1010 mm (W) × 1660 mm (H) |
| Net Weight | 245 kg |
| Compliance Standards | ASTM D642, ASTM D4169, TAPPI T804, ISO 12048, JIS Z0212, GB/T 16491, GB/T 4857.4, QB/T 1048–2004 |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | C611M |
| Force Sensor Capacity | 9 kN (triple-load-cell configuration) |
| Force Accuracy | ±1% of reading (10–100% of full scale), ±0.1% FS (0–10% of full scale) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Test Speed Range | 0–200 mm/min (integer-step adjustable) |
| Speed Accuracy | ±2% of set value |
| Maximum Stroke | 450 mm |
| Specimen Height Range | 0–600 mm |
| Test Chamber Dimensions | 800 mm (L) × 800 mm (W) × 610 mm (H) |
| Overall Dimensions | 850 mm (L) × 1010 mm (W) × 1660 mm (H) |
| Power Supply | AC 220 V ±10%, 50 Hz OR AC 120 V ±10%, 60 Hz (user-selectable) |
| Net Weight | 245 kg |
| Compliance Standards | ASTM D642, ASTM D4169, TAPPI T804, ISO 12048, JIS Z0212, GB/T 16491, GB/T 4857.4, QB/T 1048–2004 |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | C611M |
| Price Range | USD 7,000 – 14,000 |
| Sensor Capacity | 9 kN (triple-load-cell configuration) |
| Force Accuracy | ±1% of reading (10–100% of full scale), ±0.1% FS (0–10% FS) |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Test Speed | 0–200 mm/min (integer-adjustable) |
| Speed Accuracy | ±2% of set value |
| Stroke | 450 mm |
| Max Specimen Height | 600 mm |
| Test Chamber Dimensions | 800 mm (L) × 800 mm (W) × 610 mm (H) |
| Overall Dimensions | 850 mm (L) × 1010 mm (W) × 1660 mm (H) |
| Power Supply | AC 220 V ±10%, 50 Hz OR AC 120 V ±10%, 60 Hz (user-selectable) |
| Net Weight | 245 kg |
| Compliance Standards | ASTM D642, ASTM D4169, TAPPI T804, ISO 12048, JIS Z0212, GB/T 16491, GB/T 4857.4, QB/T 1048-2004 |
| Brand | Labthink |
|---|---|
| Model | C612M |
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Sensor Range | 5 Nm (standard) |
| Torque Accuracy | ±0.5% of reading (10–100% FS) |
| Torque Resolution | 0.0001 Nm |
| Bottle Body Clamping Range | Φ5–Φ170 mm |
| Cap Clamping Range | Φ10–Φ80 mm |
| Bottle Height Adjustment | 20–400 mm |
| Max Test Torque | 2 Nm (customizable) |
| Pneumatic Supply | 0.7 MPa (101.5 psi), external air source required |
| Statistical Capacity | 0–999 samples |
| Dimensions (L×W×H) | 550 × 365 × 1150 mm |
| Weight | 39 kg |
| Power | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz (user-selectable) |
| Compliance Standards | BB/T 0034, GB/T 17876, ASTM D2063, ASTM D3198, ASTM D3474, BB/T 0025 |
| Brand | Labthink |
|---|---|
| Model | C612M |
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Torque Sensor Range | 5 N·m (standard) |
| Accuracy | ±0.5% of reading (10–100% FS) |
| Resolution | 0.0001 N·m |
| Cap Holding Diameter | Φ10–Φ80 mm |
| Bottle Body Holding Diameter | Φ5–Φ170 mm |
| Bottle Height Range | 20–400 mm |
| Max Test Torque | 2 N·m (customizable) |
| Air Supply Requirement | 0.7 MPa (101.5 psi), clean dry air (user-supplied) |
| Statistical Batch Size | 0–999 samples |
| Dimensions (L×W×H) | 550 × 365 × 1150 mm |
| Weight | 39 kg |
| Power | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz (dual-voltage compatible) |
| Brand | Labthink |
|---|---|
| Model | C612M |
| Sensor Range | 5 N·m (standard) |
| Torque Accuracy | ±0.5% of reading (10–100% FS) |
| Torque Resolution | 0.0001 N·m |
| Bottle Body Clamping Diameter | Φ5–Φ170 mm |
| Cap Clamping Diameter | Φ10–Φ80 mm |
| Bottle Height Range | 20–400 mm |
| Max Test Torque | 2 N·m (customizable) |
| Air Supply Requirement | 0.7 MPa (101.5 psi), Ø4 mm polyurethane tubing |
| Power | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz |
| Dimensions (L×W×H) | 550 × 365 × 1150 mm |
| Weight | 39 kg |
| Compliance Standards | GB/T 17876, ASTM D2063, ASTM D3198, ASTM D3474, BB/T 0025, BB/T 0034 |
| Brand | Labthink |
|---|---|
| Model | C612M |
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Max Torque | 40 Nm |
| Torque Measurement Range | 5 Nm (standard) |
| Torque Resolution | 0.0001 Nm |
| Twist Angle Measurement Range | Φ5 mm – Φ170 mm |
| Motor Power | 3 W |
| Torque Accuracy | ±0.5% of reading (10–100% FS) |
| Cap Clamping Range | Φ10 mm – Φ80 mm |
| Bottle Body Height Range | 20–400 mm |
| Air Supply Requirement | 0.7 MPa (101.5 psi), external air source required |
| Data Storage Capacity | 1200 test records |
| Dimensions | 550 × 365 × 1150 mm (L×W×H) |
| Weight | 39 kg |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz (dual-voltage compatible) |
| Brand | Labthink |
|---|---|
| Model | C620H |
| Force Capacity | 5 N (standard) |
| Force Accuracy | ±0.5% of reading (10–100% FS) |
| Force Resolution | 0.001 N |
| Test Speed | 0–500 mm/min (integer setting only) |
| Speed Accuracy | ±0.5% of set value (1–100% of max speed) |
| Travel Range | 10–300 mm |
| Displacement Resolution | 0.01 mm |
| Test Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Accuracy | ±2 °C (single-point calibration, effective area of test platform) |
| Test Platform Dimensions | 400 mm × 150 mm |
| Specimen Thickness Limit | ≤2 mm |
| Sled Dimensions | 63.5 mm × 63.5 mm |
| Sled Mass | 200 g (custom sleds available) |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz |
| Dimensions (L×W×H) | 635 mm × 300 mm × 250 mm |
| Net Weight | 25 kg |
| Brand | Labthink |
|---|---|
| Model | C630H |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Temperature Range | 25–300 °C |
| Sealing Pressure Range | 0.05–0.7 MPa |
| Pressure Resolution | 0.001 MPa |
| Sealing Time Range | 0.1–999.99 s |
| Time Resolution | 0.01 s |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Temperature Gradient Across Sealing Heads | ≤20 °C |
| Sealing Surface Dimensions | 40 mm × 10 mm |
| Number of Independent Sealing Heads | 10 (5 upper + 5 lower, each individually temperature-controlled) |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz |
| Net Weight | 55 kg |
| Overall Dimensions | 375 mm (L) × 360 mm (W) × 518 mm (H) |
| Air Source Interface | Ø8 mm polyurethane tubing |
| Required External Air Supply | 0.7 MPa clean, dry compressed air |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | C630H |
| Price Range | USD 4,200 – 11,200 (FOB Qingdao) |
| Heat Seal Temperature Range | 25–300 °C |
| Heat Seal Pressure Range | 0.05–0.7 MPa (Resolution: 0.001 MPa) |
| Seal Time Range | 0.10–999.99 s (Resolution: 0.01 s) |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Temperature Uniformity | ≤20 °C across sealing surface |
| Temperature Stability | ±0.2 °C |
| Sealing Surface Dimensions | 40 mm × 10 mm per head |
| Number of Independent Sealing Heads | 10 (5 upper + 5 lower, each individually PID-controlled) |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz (user-selectable) |
| Net Weight | 55 kg |
| Dimensions (L×W×H) | 375 × 360 × 518 mm |
| Air Supply Requirement | 0.7 MPa clean, dry compressed air (user-supplied, Ø8 mm polyurethane tubing) |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Jinan Labthink Electromechanical Technology Co., Ltd. |
| Model | C630H |
| Temperature Range | 25–300 °C |
| Sealing Pressure | 0.05–0.70 MPa (Resolution: 0.001 MPa) |
| Sealing Time | 0.10–999.99 s (Resolution: 0.01 s) |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Temperature Uniformity | ≤20 °C across 5 sealing bars |
| Sealing Surface | 40 mm × 10 mm per bar |
| Independent Dual-Zone Heating | 5 upper + 5 lower sealing heads |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz |
| Dimensions | 375 × 360 × 518 mm (L×W×H) |
| Weight | 55 kg |
| Compressed Air Requirement | 0.7 MPa, Ø8 mm polyurethane tubing |
| Brand | Labthink |
|---|---|
| Model | C630H |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Price Range | USD 4,200 – 9,800 (FOB) |
| Heat Seal Temperature Range | Ambient to 300 °C |
| Heat Seal Pressure Range | 0.05–0.7 MPa (Resolution: 0.001 MPa) |
| Seal Time Range | 0.1–999.99 s (Resolution: 0.01 s) |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Temperature Gradient Across Seal Heads | ≤20 °C |
| Seal Face Dimensions | 40 mm × 10 mm |
| Number of Independent Seal Heads | 10 (5 upper + 5 lower, each individually temperature-controlled) |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz (user-selectable) |
| Weight | 55 kg |
| Overall Dimensions | 375 mm (L) × 360 mm (W) × 518 mm (H) |
| Pneumatic Interface | Ø8 mm polyurethane tubing |
| Required Air Supply | Clean, dry compressed air at 0.7 MPa (user-supplied) |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Regional Category | Domestic |
| Model | C630H |
| Price Range | USD 4,200 – 9,800 |
| Heat Seal Temperature Range | 25–300 °C |
| Heat Seal Pressure Range | 0.05–0.7 MPa |
| Pressure Resolution | 0.001 MPa |
| Seal Time Range | 0.1–999.99 s |
| Time Resolution | 0.01 s |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Temperature Gradient Across Heads | ≤20 °C |
| Seal Area per Head | 40 mm × 10 mm |
| Number of Independent Seal Heads | 10 (5 upper + 5 lower, individually temperature-controlled) |
| Power Supply | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz |
| Net Weight | 55 kg |
| Dimensions (L×W×H) | 375 × 360 × 518 mm |
| Air Supply Requirement | 0.7 MPa dry compressed air (user-supplied, Ø8 mm polyurethane tubing) |
| Brand | Labthink |
|---|---|
| Model | C631H |
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Application | Rubber & Plastic Industry |
| Standards Compliance | GB/T 34848, ISO 14616:1997, DIN 53369:1976 |
| Force Sensor Range | 5 N (standard), optional 10 N / 30 N |
| Force Accuracy | ±0.5% of reading (10–100% FS), ±0.05% FS (0–10% FS) |
| Force Resolution | 0.001 N |
| Displacement Range | 0.1–95 mm |
| Displacement Accuracy | ±0.1 mm |
| Shrinkage Rate Range | 0.1–95% |
| Temperature Range | Ambient to 210 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Test Stations | 1 station (2 specimens simultaneously) |
| Specimen Size | 110 mm × 15 mm |
| Dimensions | 480 × 400 × 630 mm (L×W×H) |
| Weight | 26 kg |
| Power Supply | 220 VAC ±10%, 50 Hz / 120 VAC ±10%, 60 Hz |
| Brand | Labthink |
|---|---|
| Model | C631H |
| Application | Quantitative measurement of thermal shrinkage force, cold shrinkage force, and thermal shrinkage rate of plastic films (e.g., PE, PET, PVC, OPS) |
| Standards Compliance | GB/T 34848, ISO 14616:1997, DIN 53369:1976 |
| Force Sensor Range | 5 N (standard) |
| Force Accuracy | ±0.5% of reading (10–100% FS), ±0.05% FS (0–10% FS) |
| Force Resolution | 0.001 N |
| Displacement Range | 0.1–95 mm |
| Displacement Accuracy | ±0.1 mm |
| Shrinkage Rate Range | 0.1–95% |
| Temperature Range | Ambient to 210 °C |
| Temp. Stability | ±0.2 °C |
| Temp. Accuracy | ±0.5 °C (single-point calibration) |
| Test Stations | 1 station (dual-sample configuration) |
| Sample Size | 110 mm × 15 mm |
| Dimensions | 480 × 400 × 630 mm (L×W×H) |
| Weight | 26 kg |
| Power | 220 VAC ±10%, 50 Hz / 120 VAC ±10%, 60 Hz |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | C631H |
| Pricing | Upon Request |
| Brand | Labthink |
|---|---|
| Model | C632B |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Force Sensor Options | 30 N (standard), 50 N / 100 N / 200 N (optional) |
| Force Accuracy | ±1% of reading (10–100% FS), ±0.1% FS (0–10% FS) |
| Force Resolution | 0.01 N |
| Test Speeds | 150 / 200 / 300 / 500 mm/min |
| Hot Tack modes | 1500 / 2000 mm/min |
| Specimen Width | 15 mm / 25 mm / 25.4 mm |
| Stroke | 500 mm |
| Sealing Temperature Range | Ambient to 250 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Sealing Time | 0.1–999.9 s |
| Hot Tack Time | 0.1–999.9 s |
| Sealing Pressure | 0.05–0.7 MPa |
| Sealing Jaw Dimensions | 100 mm × 5 mm |
| Pneumatic Interface | Φ4 mm polyurethane tubing |
| Required Air Supply | 0.7 MPa (101.5 psi), user-supplied |
| Power | 220 VAC ±10%, 50 Hz / 120 VAC ±10%, 60 Hz |
| Dimensions (L×W×H) | 1120 × 380 × 330 mm |
| Net Weight | 45 kg |
| Compliance | GB/T 34445–2017, ASTM F1921, ASTM F2029, QB/T 2358, YBB 00122003 |
| Brand | Labthink |
|---|---|
| Model | C632B |
| Application | Heat seal strength, hot tack strength, peel strength, tensile strength testing of flexible packaging materials |
| Standards Compliance | GB/T 34445-2017, ASTM F1921, ASTM F2029, QB/T 2358, YBB 00122003 |
| Temperature Range | Ambient to 250 °C |
| Temp. Accuracy | ±0.5 °C (single-point calibration) |
| Temp. Stability | ±0.2 °C |
| Seal Time | 0.1–999.9 s |
| Hot Tack Time | 0.1–999.9 s |
| Seal Pressure | 0.05–0.7 MPa |
| Seal Area | 100 mm × 5 mm |
| Force Sensor Options | 30 N (standard), 50/100/200 N (optional) |
| Force Accuracy | ±1% of reading (10–100% FS), ±0.1% FS (0–10% FS) |
| Force Resolution | 0.01 N |
| Test Speeds | 150, 200, 300, 500, 1500, 2000 mm/min |
| Sample Width | 15 mm, 25 mm, or 25.4 mm |
| Stroke | 500 mm |
| Power Supply | 220 VAC ±10% 50 Hz / 120 VAC ±10% 60 Hz |
| Dimensions | 1120 × 380 × 330 mm (L×W×H) |
| Net Weight | 45 kg |
| Pneumatic Interface | Φ4 mm polyurethane tubing |
| Required Air Supply | 0.7 MPa (user-provided) |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Origin Category | Domestic (China) |
| Model | C632M |
| Price Range | USD 7,000 – 14,000 |
| Sensor Capacity | 50 N |
| Force Accuracy | Class 0.5 |
| Force Resolution | 0.001 N |
| Pressure Range | 0.05–0.7 MPa |
| Pressure Resolution | 0.001 MPa |
| Temperature Range | Ambient to 250 °C |
| Temperature Stability | ±0.2 °C |
| Sealing Time | 0.1–999.9 s |
| Delay Time | 0.01–999.99 s |
| Test Speed | 1500, 2000–12,000 mm/min |
| Seal Head Configuration | Dual-heated, single pair |
| Seal Head Dimensions | 100 mm × 10 mm |
| Jaw Width | 35 mm |
| Specimen Width Options | 15 mm, 25 mm, or 25.4 mm |
| Gauge Length | 350 mm |
| Air Supply Requirement | Dry compressed air, 0.7 MPa (101.5 PSI), Φ6 mm polyurethane tubing |
| Dimensions (H×W×D) | 81 cm × 43 cm × 48 cm |
| Weight | 60 kg |
| Power Input | 120 VAC ±10%, 60 Hz OR 220 VAC ±10%, 50 Hz (configurable) |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Region Classification | Domestic (China) |
| Model | C632M Hot Tack Tester |
| Price Range | USD 4,200 – 9,800 |
| Pressure Range | 0.05–0.7 MPa |
| Pressure Resolution | 0.001 MPa |
| Temperature Range | Ambient to 250 °C |
| Temperature Stability | ±0.2 °C |
| Force Sensor Capacity | 50 N |
| Force Accuracy | Class 0.5 |
| Force Resolution | 0.001 N |
| Seal Time Range | 0.1–999.9 s |
| Delay Time Range | 0.01–999.99 s |
| Test Speed | 1500, 2000–12000 mm/min |
| Seal Head Dimensions | 100 mm × 10 mm |
| Sample Width Options | 15 mm / 25 mm / 25.4 mm |
| Jaw Spacing | 350 mm |
| Air Supply Requirement | Dry compressed air, 0.7 MPa (101.5 PSI), Φ6 mm PU tubing |
| Power Input | 120 VAC ±10% 60 Hz or 220 VAC ±10% 50 Hz |
| Net Weight | 60 kg |
| Dimensions (H×W×D) | 81 cm × 43 cm × 48 cm |
| Compliance Standards | ASTM F1921, GB/T 34445 |
| Brand | Labthink |
|---|---|
| Model | C640M / C640H |
| Measurement Principle | Mechanical Contact (Controlled-Pressure Displacement Sensing) |
| Test Range (Std) | 0–2 mm |
| Resolution | 0.1 µm |
| Repeatability | 0.8 µm (C640M) / 0.4 µm (C640H) |
| Applied Pressure | 17.5 ± 1 kPa (film, 50 mm²) / 100 ± 1 kPa (paper, 200 mm²) |
| Compliance | ISO 4593, ISO 534, ASTM D6988, ASTM F2251, GB/T 6672, GB/T 451.3, TAPPI T411, EN 1942, JIS K6250 |
| Optional Features | Auto-Feeding Module, DataShield™ Secure Data Management System, GMP-Compliant Software Validation Package (21 CFR Part 11 & Annex 11 Ready) |
| Power Supply | 220–240 VAC, 50 Hz / 120 VAC, 60 Hz |
| Dimensions | 370 × 350 × 410 mm (L×W×H) |
| Net Weight | 26 kg |
| Brand | Labthink |
|---|---|
| Model | C640 |
| Measurement Principle | Mechanical Contact (Controlled-Pressure Displacement Sensing) |
| Standard Test Pressure | 17.5 ± 1 kPa (film), 100 ± 1 kPa (paper, default) |
| Contact Area | 50 mm² (film), 200 mm² (paper) |
| Resolution | 0.1 µm |
| Repeatability | 0.4 µm (C640H), 0.8 µm (C640M) |
| Standard Range | 0–2 mm |
| Optional Ranges | 0–6 mm, 0–12 mm |
| Adjustable Gap | 0–1000 mm |
| Traverse Speed | 1.5–80 mm/s |
| Power Supply | 220–240 VAC, 50 Hz / 120 VAC, 60 Hz |
| Dimensions (L×W×H) | 370 × 350 × 410 mm |
| Net Weight | 26 kg |
| Compliance | ISO 4593, ISO 534, ASTM D6988, ASTM F2251, GB/T 6672, GB/T 451.3, TAPPI T411, EN 1942, JIS K6250, ISO 12625-3, ISO 9073-2, FDA 21 CFR Part 11 (with DataShield™ & GMP-compliant software option) |
| Brand | Labthink |
|---|---|
| Model | C640M / C640H |
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Measurement Principle | Mechanical contact with controlled pressure (ISO 534, ASTM D6988 compliant) |
| Test Range (Standard) | 0–2 mm |
| Resolution | 0.1 µm |
| Repeatability | ≤0.8 µm (C640M) / ≤0.4 µm (C640H) |
| Applied Pressure | 100 ±1 kPa (paper, 200 mm²), 17.5 ±1 kPa (film, 50 mm²) |
| Adjustable Measurement Spacing | 0–1000 mm |
| Sample Feed Speed | 1.5–80 mm/s |
| Optional Accessories | Automated Sample Feeder, DataShield™ Secure Data Management System, GMP-Compliant Software Module (21 CFR Part 11 Audit Trail & User Permission Controls) |
| Power Supply | 220–240 VAC, 50 Hz / 120 VAC, 60 Hz |
| Dimensions (L×W×H) | 370 × 350 × 410 mm |
| Net Weight | 26 kg |
| Brand | Labthink |
|---|---|
| Model | C640H |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Price Range | USD 2,800 – 14,000 |
| Measurement Principle | Mechanical Contact with Controlled Load |
| Standards Compliance | ISO 4593, ISO 534, ASTM D6988, ASTM F2251, GB/T 6672, GB/T 451.3, TAPPI T411, EN 1942, JIS K6250 |
| Test Range (Std) | 0–2 mm |
| Resolution | 0.1 µm |
| Repeatability | ±0.4 µm |
| Load Options | 17.5 ±1 kPa (50 mm², film), 100 ±1 kPa or 50 ±1 kPa (200 mm², paper/board) |
| Sample Traverse Distance | 0–1000 mm (programmable) |
| Feed Speed | 1.5–80 mm/s (adjustable) |
| Optional Accessories | Auto-Feeding Module, DataShield™ Secure Data Management System, GMP-Compliant Software Configuration (21 CFR Part 11 Audit Trail & User Access Control) |
| Brand | Labthink |
|---|---|
| Model | C640H |
| Measurement Principle | Mechanical Contact Method |
| Standard Compliance | GB/T 451.3, ISO 534, ASTM D6988, TAPPI T411, ISO 4593, GB/T 6672, EN 1942, JIS Z1702 |
| Test Range (Std) | 0–2 mm |
| Resolution | 0.1 µm |
| Repeatability | 0.4 µm |
| Measuring Pressure (Paper) | 100 ± 1 kPa (std) / 50 ± 1 kPa (optional) |
| Contact Area (Paper) | 200 mm² |
| Power Supply | 220–240 VAC, 50 Hz / 120 VAC, 60 Hz |
| Dimensions | 370 × 350 × 410 mm (L×W×H) |
| Net Weight | 26 kg |
| Optional Features | Automatic Sample Feeder, DataShield™ Data Integrity System, GMP-Compliant Software Module |