ZYKX
Filter
Showing 1–30 of 58 results
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | InLab-2016 |
| Instrument Type | Benchtop Laboratory Water Quality Analyzer |
| Measured Parameters | COD (High/Low Range), Ammonia-N, Total Phosphorus, Total Nitrogen, Nitrate-N, Nitrite-N, Free/Total Chlorine, Chlorine Dioxide, Hexavalent Chromium, Color, Turbidity, Suspended Solids, Sulfate, Sulfide, Fluoride, Aniline, Phosphate, Barium, Total Chromium, Iron, Ferrous Iron, Copper, Nickel, Zinc, Manganese, Dissolved Oxygen, pH, Temperature, Conductivity, ORP, Salinity, TDS, Cobalt, Ozone, Cyanide |
| Detection Method | Spectrophotometric (including DPD, Nessler, Molybdate, Cerium(IV)–Catalyzed Oxidation, etc.), Electrochemical (pH, DO, Conductivity, ORP, Salinity, TDS), and Gravimetric/Turbidimetric (SS, Sulfate) |
| Display | 7-inch TFT color capacitive touchscreen with Chinese UI |
| Data Storage | 10,000 measurement records with power-loss protection |
| Calibration | 1–7 point calibration with auto-curve adjustment |
| Connectivity | RS232 + USB |
| Dimensions | 300 × 220 × 120 mm |
| Weight | 2.8 kg |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Operating Environment | 5–40 °C, RH <85% (non-condensing) |
| Compliance Standards | HJ/T 399–2007, HJ 535–2009, GB 11893–89, GB 11892–89, EPA-approved methods, ISO 7027, ISO 5667, ASTM D1253, ASTM D3370 |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | InLab-2022 |
| Pricing | Upon Request |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | InLab-2022 |
| Instrument Type | Laboratory Benchtop Analyzer |
| Measurement Principle | Rapid Digestion Spectrophotometry |
| Wavelength Range | 590–610 nm |
| COD Range | 5–15,000 mg/L (high-range), 5–150 mg/L (low-range), 0–50 mg/L (permanganate method) |
| Repeatability | ≤ ±5% |
| Measurement Time | 20 min (typical COD cycle) |
| Batch Capacity | 15 samples |
| Temperature Control Range | 45–200 °C |
| Temperature Uniformity | ≤ 1 °C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Dimensions | 370 × 250 × 140 mm |
| Weight | Approx. 4.2 kg |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | InLab-2100 |
| Instrument Type | Laboratory Benchtop Analyzer |
| Measurement Principle | Infrared Spectrophotometry (C–H Bond Absorption at 2930 cm⁻¹, 2960 cm⁻¹, and 2850 cm⁻¹) |
| Measurement Range | 0.00–100 mg/L (water sample, 4 cm cell, direct analysis) |
| Detection Limit | <0.12 mg/L (water sample) |
| Accuracy | ±0.5 mg/L (for C < 10 mg/L) |
| Resolution | 0.1 ppm (0.001 mg/L) |
| Measurement Frequency | 10 samples per minute |
| Wavenumber Range | 3400–2400 cm⁻¹ |
| Spectral Resolution | 1 cm⁻¹ |
| Absorbance Range | 0.0000–2.000 AU |
| Baseline Drift | <0.001 AU/60 min |
| Cell Compatibility | 0.5–5 cm pathlength cuvettes (standard: 4 cm) |
| Interface | RS-232 or USB |
| Power Supply | 220 V ±22 V, 50 Hz ±1 Hz, 40 VA |
| Dimensions | 550 × 380 × 160 mm |
| Weight | ~14 kg |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | InLab-2200N |
| Principle | Infrared Spectrophotometry |
| Measurement Range | 0–800 mg/L (extract) / 0.0012–64,000 mg/L (water sample, 100:1 extraction ratio) |
| Detection Limit | <0.05 mg/L (water sample, typical) |
| Accuracy | ±0.4 mg/L (C < 10 mg/L), ±3% (10 ≤ C ≤ 80 mg/L) |
| Resolution | 0.001 mg/L |
| Wavenumber Range | 4000–2400 cm⁻¹ |
| Spectral Resolution | 1 cm⁻¹ |
| Absorbance Range | 0.0000–3.000 AU |
| Baseline Drift | <0.001 AU/60 min |
| Measurement Frequency | 10 samples/min (discrete mode) |
| Cell Pathlength Compatibility | 0.5–5 cm |
| Interface | RS-232 or USB |
| Dimensions | 550 × 380 × 150 mm |
| Weight | ~14 kg |
| Power | 220 ± 22 V, 50 ± 1 Hz, 40 VA |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | InLab-2400 |
| Price Range | USD 4,200 – 7,000 |
| Instrument Type | Laboratory Water Quality Analyzer |
| Target Analyte | Petroleum Hydrocarbons (Oil Content) |
| Compliance | HJ 970–2018 |
| Wavelength Range | 190–400 nm |
| Primary Measurement Wavelength | 225 nm |
| Absorbance Stability | ±0.005 Abs / 10 min |
| Absorbance Range | 0.000–2.000 Abs |
| Detection Limit | 0.001 mg/L |
| Repeatability | RSD ≤ 1% (for 2–20 mg/L oil standards, n=11) |
| Accuracy | ±2% |
| Resolution | 0.001 mg/L |
| Correlation Coefficient | R > 0.9995 (calibration range: 0–20 mg/L) |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | InLab-2500 |
| Detection Method | UV Spectrophotometry (225 nm) |
| Extraction Solvent | n-Hexane |
| Compliance | HJ 970–2018 |
| Detection Limits | Petroleum Hydrocarbons ≤ 0.01 mg/L, Animal & Vegetable Oils ≤ 0.5 mg/L |
| Measurement Range | 0.01–100 mg/L |
| Repeatability | ≤1% (at 20 mg/L petroleum standard) |
| Linearity | R > 0.999 |
| Sample Throughput | Multi-sample capable (manual or optional auto-extraction) |
| Cell Type | 20 mm quartz cuvette |
| Data Storage | 10,000 records with power-loss protection |
| Interface | RS232 & USB |
| Operating Temp | 5–40 °C |
| Power | AC 220 V ±15%, 50 Hz, 28 W |
| Dimensions | 395 × 298 × 120 mm |
| Weight | 4.5 kg |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JF99H |
| Pricing | Available Upon Request |
| Measurement Principle | Washburn Capillary Rise Method |
| Pressure Range | 0–330 mbar |
| Pressure Resolution | 0.16 mbar |
| Temperature Range | Ambient to 200 °C (optional dual-zone electric heating control) |
| Contact Angle Range | 0–180° |
| Quartz Tube Dimensions | OD 10 mm / ID 8 mm or 6 mm |
| Instrument Dimensions | 295 × 240 × 260 mm |
| Power Supply | 220 V AC, 20 W |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | SCI-016 |
| Surface Tension Range | 0–150 mN/m |
| Resolution | < 0.05 mN/m |
| Measurement Method | Wilhelmy Plate (Du Noüy–Wilhelmy) |
| Trough Dimensions | 700 mm × 140 mm |
| Barrier Speed | 10–100 mm/min (infinitely variable) |
| Temperature Control | Dual independent water jackets (30 L pure water tank + 10 L trough jacket), both settable to 35 ± 0.5 °C |
| Power Supply | AC 220 V ± 10 V, 50 Hz, < 150 W |
| Compliance | ASTM D971, ISO 6295, ISO 1409, USP <721>, GLP-ready data logging |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | SCI-026 |
| Instrument Type | Laboratory-Based Automatic Water Sampler |
| Sampling Mode | Exceedance-Triggered Retention Sampling |
| Single Sample Volume | 10–1000 mL (user-configurable) |
| Sampling Volume Accuracy | ≤5% |
| Flow-Proportional Sampling Support | Yes (via external 4–20 mA or pulse flow signal) |
| Sampling Interval | 5–9999 min (programmable) |
| Vertical Sampling Depth | 8.7 m |
| Horizontal Sampling Distance | 80 m |
| Sample Bottle Capacity | 24 × 1000 mL HDPE rectangular bottles |
| Mixing Tank Volume | 3.5 L (dual A/B tanks) |
| Data Storage | 10,000 sampling records + 2,000 system event logs |
| Power Supply | AC 220 V ±15%, 50 Hz |
| Average Power Consumption | 130 W |
| Operating Humidity | ≤90% RH |
| MTBF | ≥1440 h |
| Insulation Resistance | >20 MΩ |
| Tube Leak Integrity | ≤−0.08 MPa |
| Clock Drift | Δ1 ≤0.1%, Δ12 ≤30 s |
| Temperature Control (optional chiller) | ±1 °C |
| Communication Interfaces | RS-232, RS-485, 4–20 mA analog input, digital I/O (dry contact) |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JS94H2M |
| Zeta Potential Range | ±3000 mV |
| Measurement Accuracy | ±5% |
| pH Range | 0.00–14.00 |
| pH Resolution | 0.1 pH |
| Zeta Resolution | 1 mV |
| Temperature Range | −5.0 to 105.0 °C (Accuracy: ±0.1 °C) |
| Optional Thermostatic Platform | −10 to 95 °C |
| Sample Volume per Test | 0.5 mL |
| Optical System | Semiconductor-based blue/green LED illumination (low-power, non-thermal) |
| Magnification | 1200× |
| Electrophoretic Cell | Integrated Ag/Pt/Ti electrodes in 0.5 cm-thick precision glass cuvette |
| Voltage Polarity Switching Time | 0.30–1.20 s (adjustable) |
| Sampling Duration | 3–10 s |
| Power Supply | 220 V, 50 Hz, 150 W |
| Brand | ZYKX |
|---|---|
| Model | JS94HM |
| Measurement Principle | Laser Doppler Electrophoretic Light Scattering |
| Zeta Potential Range | ±3000 mV |
| Accuracy | ±5% |
| pH Range | 0.00–14.00 |
| pH Resolution | 0.1 pH |
| Zeta Resolution | 1 mV |
| Temperature Range | −5.0 to 105.0 °C (±0.1 °C) |
| Optional Thermostatic Stage | −10 to 95 °C |
| Sample Volume per Test | 0.5 mL |
| Optical System | Low-power semiconductor laser (blue/green, <100 µW), 1200× magnification |
| Voltage Polarity Switching Time | 0.30–1.20 s (adjustable) |
| Sampling Duration | 3–10 s |
| Power Supply | 220 V AC, 50 Hz, 150 W |
| Compliance | Designed for GLP-compliant lab environments |
| Environmental Requirement | Vibration-isolated platform, temperature- and dust-controlled room |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JS94J2M |
| Zeta Potential Range | ±3000 mV |
| Accuracy | ±5% |
| pH Range | 0.00–14.00 |
| pH Resolution | 0.1 pH |
| Zeta Resolution | 1 mV |
| Temperature Range | −5.0 to 105.0 °C |
| Temp. Accuracy | ±0.1 °C |
| Sample Volume per Measurement | 0.5 mL |
| Optical System | Semiconductor-based blue/green LED illumination (λ ≈ 470–520 nm), 1200× magnification |
| Electrophoresis Cell | Integrated Ag/Pt/Ti electrodes in 0.5 cm-thick borosilicate glass cuvette |
| Voltage Polarity Switching Time | 0.30–1.20 s (adjustable) |
| Sampling Duration | 3–10 s |
| Power Supply | 220 V AC, 50 Hz, 150 W |
| Optional Thermostatic Stage | −10 to 95 °C |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JS94JM |
| Zeta Potential Range | ±3000 mV |
| Measurement Accuracy | ±5% |
| pH Range | 0.00–14.00 |
| pH Resolution | 0.1 pH |
| Zeta Resolution | 1 mV |
| Temperature Range | −5.0 to 105.0 °C (±0.1 °C) |
| Optional Thermostatic Platform | −10 to 95 °C |
| Sample Volume per Test | 0.5 mL |
| Optical System | Semiconductor-based blue/green LED illumination (low-power, non-thermal) |
| Magnification | 1200× |
| Electrophoretic Cell | Integrated Ag/Pt/Ti electrodes in 0.5 cm-thick borosilicate glass cuvette |
| Voltage Polarity Switching Interval | 0.30–1.20 s (adjustable) |
| Sampling Duration | 3–10 s |
| Power Supply | 220 V AC, 50 Hz, 150 W |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZYJY-DZ02 |
| Instrument Category | Soil Moisture / Matric Potential Analyzer |
| Rainfall Intensity Range | 20–200 mm/h |
| Rainfall Uniformity Coefficient | >0.85 |
| Rainfall Regulation Accuracy | ±6 mm/h |
| Response Time for Intensity Adjustment | <30 s |
| Rain Gauge Orifice Diameter | Φ200 ± 0.6 mm |
| Rain Gauge Resolution | 0.1 mm |
| Controller Supply Voltage | AC 220 V, 50 Hz |
| Operating Temperature | 0–60 °C |
| Operating Relative Humidity | ≤95% RH |
| Data Logger Storage Capacity | Unlimited (SD card or internal flash) |
| Sampling Interval | ≥3 s (configurable) |
| Nozzle Types | Three interchangeable nozzles (9 mm, 11 mm, 13 mm diameter) |
| Spray Angle | 45° |
| Redundant Hydraulic Architecture | Yes |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZYJY-DZ10 |
| Instrument Type | Soil Moisture & Infiltration Simulation System |
| Rainfall Area | 2–100 m² (customizable) |
| Rainfall Height | 3–4 m (customizable) |
| Rainfall Intensity Range | 20–200 mm/h |
| Rainfall Uniformity Coefficient | >85% |
| Intensity Resolution | ±6 mm/h |
| Rainfall Duration | Programmable (unlimited) |
| Control Mode | PC-based real-time monitoring with pressure, valve status, and intensity feedback |
| Power Supply | 220 V AC |
| Structural Design | Tool-free quick-connect modular assembly |
| Service Life | ≥15 years |
| Data Storage Capacity | 1000 hours of rainfall intensity logs |
| Brand | Zykx |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | InLab-2300 |
| Instrument Type | Portable |
| Measurement Principle | Infrared Spectrophotometry (Dual-Wavelength & Full-Spectrum Scan) |
| Measurement Range | 0.00–100 mg/L (water sample, standard 4 cm quartz cuvette) |
| Detection Limit | <0.12 mg/L (CCl₄ extract) |
| <0.003 mg/L (water sample, 40 | 1 extraction ratio, 4 cm cuvette) |
| Accuracy | ±0.4 mg/L (C < 10 mg/L) |
| Repeatability | ≤1% (for 20 & 40 mg/L oil standards) |
| Resolution | 0.001 mg/L |
| Measurement Frequency | 5 samples/min |
| Wavenumber Range | 3400–2400 cm⁻¹ |
| Baseline Drift | <0.001 AU/60 min |
| Absorbance Range | 0.0000–3.000 AU |
| Linear Correlation Coefficient | R > 0.999 |
| Power Supply | 220 V ±22 V, 50 Hz ±1 Hz, 40 VA |
| Dimensions | 470 × 380 × 210 mm |
| Weight | ~12 kg |
| Operating Environment | 5–35 °C, 20–90% RH |
| Battery Life | ~8 h (integrated Li-ion) |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JF99M |
| Measurement Method | Washburn Capillary Rise Method |
| Pressure Range | 0–330 mbar |
| Pressure Resolution | 0.16 mbar |
| Operating Temperature | Ambient |
| Quartz Tube Dimensions | OD 10 mm, ID 8 mm or 6 mm |
| Power Supply | 220 V AC, 20 W |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JK15A |
| Price Range | USD 7,000 – 14,000 |
| Surface Tension Range | 0–999.99 mN/m |
| Resolution | <0.05 mN/m |
| Measurement Methods | Du Noüy Ring Method & Wilhelmy Plate Method |
| Sampling Time | 1–5 s (plate), 20–150 s (ring) |
| Interfacial Tension Capability | Yes |
| Mass Measurement Range | 0–120 g (0.1 mg resolution) |
| Power Supply | AC 220 V, 50 Hz, <150 W |
| Operating Humidity | 30–85% RH |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JK2000DM |
| Measurement Range | 0–500 mN/m |
| Resolution | <0.05 mN/m |
| Methods | Du Noüy Ring Method & Wilhelmy Plate Method |
| Sampling Cycle | 1–5 s (Plate), 20–150 s (Ring) |
| Temperature Control | Integrated恒温 Platform (Compatible with External Circulating Bath) |
| Sensor | Imported Japanese High-Precision Force Transducer |
| Compliance | SY/T 5370–1999 |
| Power | AC 220 V ± 22 V, 50 Hz, <150 W |
| Operating Humidity | 30–85% RH |
| Optional Modules | Magnetic Stirring, Dynamic Contact Angle, Fiber Wettability, Density & Powder Wettability Kits |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JK99BM |
| Measurement Range | 0–500 mN/m |
| Sensitivity | 0.01 mN/m |
| Accuracy | ±0.01 mN/m |
| Resolution | 0.01 mN/m |
| Methods | Du Noüy Ring & Wilhelmy Plate |
| Sample Volume (Ring) | 40–50 mL |
| Sample Volume (Plate) | 20–30 mL |
| Sampling Time (Ring) | 150–200 s |
| Sampling Time (Plate) | 1–5 s |
| Power Supply | AC 220 V ±5%, <150 W |
| Temperature Sensing Accuracy | ±0.1 °C |
| Relative Humidity Range | 30–85% RH |
| Interface | RS-232 Serial Port |
| Compliance | GB/T 22237–2008, GB/T 5549–2010, GB/T 6541–1986 |
| Brand | Zykx |
|---|---|
| Origin | Beijing, China |
| Model | JK99H4 |
| Surface Tension Range | 0–500 mN/m |
| Resolution | 0.05 mN/m |
| Temperature Control Range | Ambient to 400 °C |
| Temperature Accuracy | ±1 °C |
| Measurement Methods | Du Noüy Ring & Wilhelmy Plate |
| Sampling Interval | 150–300 s (dual-speed adjustment) |
| Power Supply | AC 220 V ±22 V, 50 Hz |
| Power Consumption | <150 W |
| Operating Humidity | 30–85% RH |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JK99M Series |
| Measurement Range | 0–1999.999 mN/m |
| Resolution & Sensitivity | 0.001 mN/m |
| Accuracy | ±0.001 mN/m |
| Primary Methods | Du Noüy Ring Method & Wilhelmy Plate Method |
| Sampling Interval | 1–5 s (plate), 20–150 s (ring) |
| Vertical Travel | 0–50 mm (standard), up to 110 mm (optional) |
| Positioning Precision | 0.1 µm |
| Data Acquisition Rate | 0.1 Hz (0.02 Hz optional) |
| Mass Measurement Range | 0–210 g (0.1 mg standard, 0.01 mg optional) |
| Temperature Sensing Accuracy | ±0.01 °C |
| Power Supply | AC 220 V ±5%, <150 W |
| Operating Humidity | 30–85% RH |
| Compliance | SY/T 5370–1999 |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JK99M |
| Measurement Range | 0–1999.999 mN/m |
| Resolution & Sensitivity | 0.001 mN/m |
| Accuracy | ±0.001 mN/m |
| Method | Du Noüy Ring & Wilhelmy Plate |
| Sampling Interval | Ring: 20–150 s |
| Plate | 1–5 s |
| Force Sensor | METTLER high-precision electromagnetic balance (0.1 mg / 0.01 mg optional) |
| Vertical Stage Travel | 0–50 mm (up to 110 mm optional) |
| Stage Precision | 0.1 µm |
| Speed Control | 0.1–500 mm/min |
| Temperature Monitoring | ±0.01 °C (external probe or internal liquid sensor optional) |
| Data Acquisition Rate | 0.1 Hz (0.02 Hz optional) |
| Power Supply | AC 220 ±5 V, <150 W |
| Operating Humidity | 30–85% RH |
| Compliance | SY/T 5370–1999 |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JK99M |
| Measurement Range | 0–1999.999 mN/m |
| Resolution & Sensitivity | 0.001 mN/m |
| Accuracy | ±0.001 mN/m |
| Method | Du Noüy Ring & Wilhelmy Plate |
| Sampling Interval | Ring method 20–150 s |
| Vertical Travel | 0–50 mm (optional 0–110 mm) |
| Positioning Precision | 0.1 µm |
| Data Acquisition Rate | 0.1 Hz (optional 0.02 Hz) |
| Temperature Sensing Precision | ±0.01 °C |
| Mass Measurement Range | 0–210 g (optional 0.01 mg resolution) |
| Power Supply | AC 220 V ±5%, <150 W |
| Operating Humidity | 30–85% RH |
| Compliance | SY/T 5370–1999 |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JML04C1M |
| Surface Tension Range | 0–150 mN/m |
| Resolution | 0.05 mN/m |
| Measurement Method | Wilhelmy Plate |
| Trough Material | PTFE (Full Fluoropolymer) |
| Trough Dimensions | 200 mm × 80 mm |
| Compression Ratio | up to 90% |
| Barrier Speed | 0.48–97 mm/min |
| Vertical Dipping Speed | 0.22–45 mm/min |
| Dipping Modes | Upward/Downward |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Max. Power Consumption | 150 W |
| Operating Temperature | Ambient (with optional external thermostatic bath) |
| Relative Humidity | 30–85% RH |
| Software Interface | Windows-based GUI with data export, curve fitting, and post-processing capability |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JML04C2M |
| Surface Tension Range | 0–150 mN/m |
| Resolution | 0.05 mN/m |
| Measurement Method | Wilhelmy Plate |
| Trough Material | PTFE (Full Fluoropolymer) |
| Trough Dimensions | 300 mm × 100 mm |
| Compression Ratio | Up to 90% |
| Barrier Speed | 0.48–97 mm/min |
| Deposition Speed | 0.22–45 mm/min |
| Deposition Modes | Upward & Downward |
| Power Supply | AC 220 V ±10%, 50 Hz, 150 W Max |
| Operating Temperature | Ambient (with optional external thermostatic bath) |
| Relative Humidity | 30–85% RH |
| Compliance | ASTM D971, ISO 6295, ISO 1409, USP <721>, GLP-ready data logging |
| Brand | ZYKX |
|---|---|
| Model | JPM2012M |
| Origin | Beijing, China |
| Power Supply | 220 V AC, 300 W |
| Dimensions (W×D×H) | 690 × 310 × 480 mm |
| Gas Flow Range | 0–500 mL/min (±0.5% accuracy, max pressure 0.5 MPa) |
| Foam Height Measurement | 0–280 mm via high-resolution video imaging |
| Minimum Sample Volume | 20 mL |
| Conductivity Sensing | 5-channel electrodes, resolution 0.01 µS/cm |
| Imaging System | 1300K-pixel digital camera, 25 fps, 5 mm macro lens |
| Foam Generator Pore Size (standard) | 1.0–1.6 µm |
| Temperature Control (optional) | ambient to 90 °C via integrated heating rod |
| Data Acquisition & Control | PC-based system with pre-installed proprietary software for real-time parameter configuration, curve visualization, and Excel-exportable reports |
| Optional Add-ons | top-view industrial CCD observation module, mechanical stirring foam generation unit |
| Brand | ZYKX |
|---|---|
| Origin | Beijing, China |
| Model | JQ03E PRO |
| Measurement Range | 0–999.999 mN/m |
| Resolution | 0.001 mN/m |
| Accuracy | ±0.01 mN/m |
| Sensitivity | 0.001 mN/m |
| Platinum Plate Method Sampling Time | 1–5 s |
| Platinum Ring Method Sampling Time | 50–200 s |
| CCD Imaging System | USB3.0 monochrome CMOS camera (1.3 MP, 54 fps), 0.7–4.5× continuous zoom, adjustable LED cold light source |
| Temperature Sensing Accuracy | ±0.1 °C (external probe optional) |
| Mass Measurement Range | 0–210 g (0.1 mg standard, 0.01 mg optional) |
| Vertical Stage Travel | 0–25 mm (0.1 mm standard, 1 µm optional) |
| Data Acquisition Rate | 0.1 s (0.02 s optional) |
| Compliance | GB/T 22237–2008, GB/T 5549–2010, GB/T 6541–1986, SY/T 5370–1999 |
| Brand | Zykx |
|---|---|
| Model | JS94HX |
| Origin | Beijing, China |
| Type | Microelectrophoresis Instrument |
| Price Range | USD 7,000–14,000 |
| Particle Size Range | 0.5–20 µm (aqueous dispersions) |
| Zeta Potential Range | ±3000 mV |
| Measurement Accuracy | ±5% |
| pH Operating Range | 1.6–13.0 (0.1 resolution) |
| Temperature Control | 5–35 °C (±0.1 °C) |
| Sample Volume per Test | 0.5 mL |
| Optical System | Semiconductor-based blue/green LED illumination (low-power, <100 µW), 1200× magnification |
| Electrophoretic Cell | Integrated Ag/Pt/Ti electrodes in 0.5 cm-thick borosilicate glass cuvette |
| Voltage Polarity Switching | Adjustable from 0.30 to 1.20 s |
| Data Acquisition Time | 3–10 s per measurement |
| Compliance | Designed for GLP-aligned laboratory workflows |