Common Laboratory Equipment
Filter
Showing 10801–10830 of 17932 results
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MF2 |
| Input Voltage | AC 100–240 V, 50/60 Hz |
| Power Consumption | 13 W |
| Dimensions (W×D×H) | 210 × 300 × 280 mm |
| Weight | 5.8 kg |
| Heating Element Travel Range (X/Y/Z) | 14 mm each |
| Capillary Manipulator Travel Range (X/Z) | 12 mm / 28 mm |
| Microscope Focus Travel (Y) | 30 mm |
| Swing Angle (X) | ≈5° |
| Tilt Adjustment (Z) | ≈3° |
| Magnification Options | 50×/100× (MF2-LS1), 400× (with MF2-LO40), 600× (MF2-LO40 + MF2-LE15) |
| Capillary Compatibility | Ø1.0, Ø1.2, Ø1.5 mm borosilicate glass |
| Included Accessories | Foot switch, power cord, capillary holder, hex key, spare heater (PT-B), silicone rubber gasket (HI01PK01) |
| Optional Lenses | MF2-LS1 (5×/10× objectives + 10× eyepieces), MF2-LE15 (15× eyepieces), MF2-LO40 (40× objective) |
| Micrometer Calibration | 20 µm/div (5×), 10 µm/div (10×), 2.5 µm/div (40×) |
| LED Illumination | Adjustable brightness, low-eye-fatigue design |
| Safety Features | Heater status display, open-circuit warning for heater failure |
| Brand | Narishige |
|---|---|
| Model | MF2 |
| Origin | Japan |
| Type | Microelectrode Fabrication Instrument |
| Heating Micro-Positioning Range (X/Y/Z) | 14 mm / 14 mm / 14 mm |
| Microneedle Manipulation Range (X/Z) | 12 mm / 28 mm |
| Microscope Travel (X/Y/Z) | ~7 mm / 30 mm / ~8 mm |
| Magnification | 50× / 100× (10× eyepiece + 5× / 10× objective) |
| Capillary Outer Diameter Compatibility | 1.0 mm |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MHW-103 |
| Travel Range (X/Y/Z) | 10 mm each axis |
| Minimum Increment | 1 µm |
| Fine Adjustment per Full Turn | 250 µm |
| Control Unit Dimensions | 115 × 115 × 132 mm, 1.6 kg |
| Actuator Dimensions | 40 × 50 × 51 mm, 180 g |
| Hydraulic Tubing Length | 0.9 m |
| Accessories | B-8C Spherical Joint, H-7 Pipette Holder, CF-3 Universal Clamp, CF-3 Wrench |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MHW-3 |
| Drive Principle | Hydraulic (Water-Based) |
| Coefficient of Thermal Expansion | Lower than oil-based systems |
| Integrated Reservoir Ratio | 5:1 |
| Coarse Travel Range (X/Y/Z) | 30 mm each axis |
| Fine Travel Range (X/Y/Z) | 2 mm each axis |
| Fine Adjustment Resolution | 0.2 µm per step |
| Full Rotation of Fine Knob | 50 µm |
| Minimum Increment | 0.2 µm |
| Ball-and-Socket Joint | B-9 included |
| Electrode Holder | H-12 included |
| Control Unit Dimensions | 115 × 115 × 132 mm, 1.6 kg |
| Drive Unit Dimensions | 155 × 155 × 100 mm, 0.9 kg |
| Hydraulic Tubing Length | 0.9 m |
| Compatibility | Compatible with UST-1 universal tilt adapter, NR-35 rotary clamp, MHW-A tilt adapter, and B-9 spherical joint |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MHW-4 |
| Travel Range | 2 mm |
| Minimum Increment | 50 µm |
| Resolution (Scale Reading) | 0.2 µm |
| Control Unit Dimensions | 65 × 88 × 93 mm, 630 g |
| Drive Unit Dimensions | 42 × 28 × 41 mm, 60 g |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MHW-A |
| Dimensions (W×D×H) | 43 × 12 × 52 mm |
| Weight | 50 g |
| Mounting Interface | Compatible with MHW-3 coarse/fine adjustment stage assembly |
| Function | Precision tilt adjustment between coarse and fine motion stages for micromanipulator positioning |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Imported |
| Model | MM-891 |
| Price Range | USD 6,800 – 13,600 |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MM-94 |
| Motion Range (X/Y/Z) | 22 mm each |
| X/Y Axis Speed | 0.1–1.4 mm/s (adjustable via knob), up to 1.4 mm/s with high-speed button |
| Z Axis Speed | 0.2–2.8 mm/s (adjustable via knob), up to 2.8 mm/s with high-speed button |
| Operating Voltage | AC 100–240 V, 50/60 Hz |
| Power Consumption | ~10 W |
| Control Unit Dimensions | 204 × 135 × 62 mm, 1.05 kg |
| Controller Dimensions | 70 × 100 × 120 mm, 0.53 kg |
| Drive Unit Dimensions | 85 × 112 × 144 mm, 0.591 kg |
| Cable Length | 1.2 m |
| Total System Weight | ~1.17 kg |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MM-94B |
| Travel Range (X/Y/Z) | 22 mm / 22 mm / 22 mm |
| X/Y Axis Speed | 0.1–1.4 mm/s (adjustable via rotary knob), up to 1.4 mm/s with high-speed button |
| Z Axis Speed | 0.2–1.4 mm/s (adjustable), up to 2.8 mm/s with high-speed button |
| Operating Voltage | AC 100–240 V, 50/60 Hz |
| Power Consumption | ~10 W |
| Controller Dimensions | 70 × 100 × 120 mm, 530 g (incl. 1.2 m cable) |
| Control Unit Dimensions | 85 × 112 × 144 mm, 591 g (incl. 1.2 m cable) |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MMN-1 |
| Coarse Adjustment Range (X/Y/Z) | 30 mm each axis |
| Dimensions (W × D × H) | 130 × 130 × 118 mm |
| Weight | 530 g |
| Accessories | Universal Wrench, Lead Screw Assembly |
| Manufacturer Type | Authorized Distributor (Imported Equipment) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MMO-203 |
| X/Y/Z Travel Range | 10 mm each axis |
| Fine Adjustment Resolution | 1 µm |
| Coarse Adjustment per Full Turn | 250 µm |
| Control Unit Dimensions | 115 × 115 × 132 mm, 1.6 kg |
| Drive Unit Dimensions | 70 × 50 × 80 mm, 0.15 kg |
| Accessories | B-8C Spherical Joint, H-7 Pipette Holder, CF-3 Clamp, Capillary Holder |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MMO-220A |
| Travel Range | 10 mm |
| Fine Adjustment per Full Rotation | 250 µm |
| Minimum Scale Division | 1 µm |
| Control Unit Dimensions | 65 × 115 × 88 mm, 630 g |
| Drive Unit Dimensions | 52 × 20 × 35 mm, 38 g |
| Included Accessory | CF-3 Clamp Holder |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MMO-220C |
| Coarse Travel Range | 10 mm |
| Full Knob Rotation Displacement | 1 mm |
| Minimum Scale Division | 20 µm |
| Controller Dimensions (W×D×H) | 55 × 45 × 80 mm, 140 g |
| Drive Unit Dimensions (W×D×H) | 45 × 20 × 35 mm, 90 g |
| Hydraulic Tubing Length | 0.9 m |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MN-151 |
| Price Range | USD $2,119 – $2,648 |
| Gross Weight | 470 g |
| Dimensions (W × D × H) | 115 × 42 × 165 mm |
| Coarse Travel (X/Y/Z) | 25 mm / 20 mm / 25 mm |
| Fine Z-Travel per Full Rotation | 250 µm |
| Fine Z-Resolution | 5 µm |
| Joystick X-Y Motion Ratio | 1:150 to 1:15 |
| Compatible Ball Joint | B-8B Spherical Joint |
| Mounting | Rod-based system with magnetic base or adapter options |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MN-4 |
| Construction Material | Anodized Aluminum Alloy |
| Weight | 0.6 kg |
| Dimensions (W × D × H) | 125 × 110 × 135 mm |
| Coarse Travel Range | X: 30 mm, Y: 30 mm, Z: 30 mm |
| Included Accessory | Universal Wrench |
| Compliance | Designed for integration with standard micromanipulator mounting systems (e.g., Narishige MM series, Leica, Olympus, Zeiss microscope stages) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MO-202U |
| Microadjustment Range (X/Y/Z) | 10 mm each |
| Minimum Increment (via Knob Rotation) | 4 µm |
| Coarse Joystick Movement Range (X–Y Plane) | 2 mm |
| Control Unit Dimensions | 130 × 130 × 220 mm, 1.86 kg |
| Transmission Unit Dimensions | 40 × 51 × 87 mm, 180 g |
| Hydraulic Tubing Length | 0.9 m |
| Included Accessories | UT-2 Universal Joint, Hex Wrench |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MO-8HL |
| Dimensions | 31.5 mm (W) × 10 mm (D) × 75 mm (H) |
| Weight | 50 g |
| Compatibility | Replaces MO-10 and MDO-84 electrode holders |
| Extended total length | 170 mm |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MO-903A |
| Dimensions (W×D×H) | 12 × 8 × 51 mm |
| Weight | 7 g |
| Coarse Adjustment Range (Z-axis) | 40 mm |
| Compatible With | NARISHIGE MO-903B Micromanipulator |
| Operation Method | Hex Key (Allen Wrench) Actuation |
| Mounting Interface | Standard NARISHIGE modular dovetail coupling |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MTK-AC |
| Dimensions | 10 mm (W) × 10 mm (D) × 4 mm (H) |
| Weight | ~3 g |
| Compatible Mounting Diameter | 4 mm (e.g., HI-7, HI-9 micromanipulator arms) |
| Application | Auxiliary anchoring component for oil-driven and pneumatic microinjection setups with multi-arm TAKANOME configurations |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MTK-AC |
| Dimensions (L×W×D) | 10 mm × 10 mm × 4 mm |
| Weight | Approx. 3 g |
| Compatible Injection Holders | ø4 mm (e.g., HI-7, HI-9) |
| Mounting | Magnetic or mechanical clamp |
| Material | Stainless steel |
| Quantity per package | 2 pcs |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MWS-32 |
| Axis Configuration | Single-axis (Z-axis primary motion with X/Y coarse positioning) |
| Coarse Travel | 30 mm (X, Y, Z) |
| Fine Adjustment Range | 2 mm (Z-axis only) |
| Minimum Graduation | 0.2 µm |
| Control Unit Dimensions | 65 × 88 × 93 mm, 630 g |
| Drive Unit Dimensions | 200 × 100 × 240 mm, 2.45 kg |
| Included Accessories | H-13 Electrode Holder, CF-3 Clamp, Universal Wrench |
| Mounting Type | Magnetic base |
| Actuation Principle | Water-hydraulic pressure transmission with mechanical fine-thread adjustment |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | NAC-1N |
| Components | CK-1 Chamber Base Plate, CK-1B Adapter Plate, CAT-1 Magnetic Tube Clamps (5 pcs) |
| Compatibility | Designed exclusively for Nikon upright and inverted microscopes with standard stage mounting interfaces |
| Material | Optical-grade chemically inert transparent polymer (non-autofluorescent, USP Class VI compliant) |
| Sealing | Precision-machined silicone gasket interface ensuring leak-free laminar flow control |
| Mounting | Integrated magnetic coupling between CAT-1 clamps and CK-1B plate enables rapid, tool-free tube organization and reconfiguration |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | NAC-1O |
| Compatibility | Olympus IX73/IX83 inverted microscopes |
| Chamber Material | Medical-grade stainless steel & polycarbonate (PC) |
| Temperature Control Range | 20–40 °C (±0.5 °C) |
| Gas Input | CO₂ (5–10%) and O₂ (5–20%) |
| Flow Rate Range | 0.1–100 µL/min |
| Sterilization | Autoclavable at 121 °C for 20 min |
| Observation Window Thickness | 1 mm |
| Mounting Diameter | φ60 mm |
| Sealing | Silicone gasket + quick-connect fittings |
| Waste Collection | Integrated drain channel + collection reservoir |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | NMN-21 3D |
| Gross Dimensions (W×D×H) | 110 × 170 × 105 mm |
| Weight | 930 g |
| Coarse Travel (X/Y/Z) | 15 mm per axis |
| Fine Travel (X/Y/Z) | 6 mm per axis |
| Fine Adjustment Resolution | 1 µm |
| Full-Turn Coarse Knob Displacement | 4 mm |
| Full-Turn Fine Knob Displacement | 250 µm |
| Standard Accessories | UST-2 Solid Universal Joint, Mounting Plate, H-1 Electrode Holder, Universal Wrench |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | NMN-21 |
| Coarse Motion Range | X/Y/Z ±15 mm |
| Fine Motion Range | X/Y/Z ±6 mm |
| Minimum Resolution | 1 µm |
| Coarse Adjustment per Full Turn | ~4 mm |
| Fine Adjustment per Full Turn | 250 µm |
| Dimensions (W×D×H) | 110 × 170 × 105 mm |
| Weight | 930 g |
| Included Accessories | UST-2 Solid Universal Joint Mount, H-13 Electrode Holder, Hex Key Wrench |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | NMN-25A |
| Dimensions (W×D×H) | 52 × 185 × 60 mm |
| Mass | 27.5 g |
| Construction | High-strength aluminum alloy |
| Travel Range | 25 mm |
| Positioning Accuracy | ±0.02 mm |
| Repeatability | ≤ ±0.01 mm |
| Mounting Interface | Standard M3 and M4 threaded holes |
| Surface Finish | Hard-anodized, low-friction sliding rails |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | NR-35 |
| Dimensions (W×D×H) | 56 × 45 × 16 mm |
| Weight | 200 g |
| Mounting Compatibility | Designed for MHW-3 coarse drive unit |
| Function | 360° rotational adjustment of manipulator axis with fine-tuned jaw opening control |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model Series | NTX, ON4, MTK-1 |
| Category | Import Laboratory Micromanipulation Equipment |
| Distributor Type | Authorized General Distributor |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | P-1A |
| Dimensions | 38 × 28 × 110 mm (W × D × H) |
| Weight | 130 g |
| Adjustment Rod | Ø10 × 50 mm |
| Included Tool | Hex Key (Allen Wrench) |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | P-1A / P-1B / P-1C |
| Rod Diameter | 10 mm (P-1A), 12 mm (P-1B), 14 mm (P-1C) |
| Rod Length | 50 mm |
| Dimensions (W × D × H) | 38 × 28 × 110 mm |
| Weight | 130 g |
| Material | Anodized High-Strength Aluminum Alloy |
| Mounting Interface | Standard Adapter-Compatible Flat Base |
| Adjustment Mechanism | Precision Knurled Micrometer Screw |
| Typical Adjustment Resolution | Sub-micrometer repeatability under controlled loading |
| Included Accessory | Hex Wrench |