Flue Gas Analyzer
Filter
Showing 61–90 of 245 results
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 2000 FT |
| Instrument Type | In-situ Extractive Hot-Wet CEMS |
| Measurement Principle | Fourier Transform Infrared (FTIR) Spectroscopy for Gaseous Pollutants & Moisture |
| Operating Temperature | Full-path 180 °C High-Temperature Heating |
| Spectral Resolution | Standard FTIR Configuration |
| Multi-component Capability | Simultaneous Quantification of ≥12 Gases |
| Compliance | Designed to Meet GB/T 16157, HJ 75–2017, HJ 76–2017, and EU EN 15267 / EN 14181 Requirements |
| Brand | EXPEC (Spectrum Technologies) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CEMS-2000 B FT |
| Instrument Type | Flue Gas Continuous Emission Monitoring System (CEMS) |
| Linearity Error | ≤ ±2% F.S. |
| Drift (Span) | ≤ ±2% F.S. / 7 days |
| Response Time | ≤ 180 s (with 50 m heated sampling line) |
| Zero Drift | ≤ ±2% F.S. / 7 days |
| Measured Gases | SO₂, NO, NO₂, NOₓ, NH₃, HCl, HF, CO, CO₂, O₂, H₂O |
| Origin | France |
|---|---|
| Supplier Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FGD-MgO/Lime |
| Pricing | Available Upon Request |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FGD-Integrated |
| Price | Upon Request |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | CEMS-2000 B S & LGA-4500 |
| Pricing | Available Upon Request |
| Brand | Foedisch |
|---|---|
| Origin | Germany |
| Model | MCA10m |
| Instrument Type | Portable Flue Gas Analyzer |
| Measurement Accuracy (Full Scale) | ±0.1% |
| Repeatability | ≤2% |
| Response Time (T90) | 3 s |
| Long-Term Stability | ±2% per 8 h |
| Measured Gases | O₂, CO, CO₂, NO, SO₂, NO₂ |
| Detection Principle | Electrochemical (O₂, CO, NO, SO₂, NO₂) and NDIR (CO₂) |
| Operating Temperature Range | -10 °C to +50 °C |
| IP Rating | IP42 |
| Power Supply | Rechargeable Li-ion battery (≥6 h continuous operation) |
| Data Storage | Internal SD card (≥16 GB), up to 1 million data points |
| Compliance | EN 50379-1/-2, DIN EN 15267-3, MCERTS certified (UK), ISO 12039, ISO 10849, ASTM D6522 |
| Brand | Foedisch |
|---|---|
| Origin | Germany |
| Model | MCA14m |
| Measurement Principle | Non-Dispersive Infrared (NDIR) with High-Temperature Optical Path |
| Operating Temperature | 185 °C (entire gas path heated) |
| Accuracy | ≤1% FS |
| Repeatability | ±2% FS |
| Response Time (T90) | <10 s |
| Zero Calibration | Automatic, using ambient air |
| Gas Components | O₂, CO₂, H₂O, SO₂, NO, NO₂, N₂O, NH₃, HCl, CO, CH₄ |
| Sampling Method | Extractive, hot-wet |
| Power Supply | 230 V AC, 50/60 Hz |
| Enclosure Rating | IP65 |
| Compliance | EN 15267-3, EN 14181, MCERTS, ISO 14001-compatible operation |
| Data Output | RS485, Ethernet, 4–20 mA analog outputs |
| Software | PC-based configuration & data logging (free OEM software with audit trail) |
| Brand | Foedisch |
|---|---|
| Origin | Germany |
| Model | UVA17m CD |
| Instrument Type | Portable Flue Gas Analyzer |
| Measurement Principle | UV Differential Absorption Spectroscopy (UV-DOAS) for NO, NO₂, SO₂, NH₃, H₂S |
| Compliance | HJ 1131–2020, HJ 1132–2020, HJ/T 397–2007, JJG 968–2002, DB37/T 2704–2015, DB37/T 2705–2015, DB37/T 2641–2015 |
| Operating Environment | High-humidity, low-sulfur flue gas streams |
| Key Performance Attributes | Moisture-insensitive measurement, dual-range auto-switching, high-temperature sample path (180 °C), integrated thermal stabilization of optical components, sub-ppm detection limits, cross-interference compensation algorithm |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | CEMS-2000 B |
| Instrument Type | Flue Gas Continuous Emission Monitoring System |
| Response Time | 4 s |
| Measured Parameters | SO₂, NO, O₂, Relative Humidity, Flue Gas Temperature, Static Pressure, Flow Velocity, Particulate Matter (PM) |
| Detection Principle | NDIR (SO₂, CO), UV Absorption (NO), Electrochemical Cell (O₂), Capacitive/Hygrometric (Humidity), PT100/Thermocouple (Temperature), Piezoresistive (Pressure), Pitot Tube or Ultrasonic (Flow Velocity), Light Scattering / Beta Attenuation (PM) |
| Communication Interface | RS485, 4–20 mA, Ethernet, Modbus TCP/RTU, OPC UA |
| Compliance | GB/T 16157, HJ 75–2017, HJ 76–2017, ISO 12039, EN 15267, EN 14181 |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | CEMS-2000 B FT |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measurement Principle | Fourier Transform Infrared Spectroscopy |
| Accuracy | ≤ ±2% of Full Scale (F.S.) |
| Repeatability / Span Drift | ≤ ±2% F.S. over 7 days |
| Response Time | ≤ 180 s |
| Zero Drift | ≤ ±2% F.S. over 7 days |
| Operating Temperature | Sample Path Heated to 180 °C |
| Interferometer | Patented ROCKSOLID™ Dynamic Alignment-Free Design |
| Calibration | Automated Zero and Span Calibration |
| Compliance | Designed for EPA Method 320, ISO 12039, EN 15267-3, and applicable EU IED & US Clean Air Act requirements |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | CEMS-2000 |
| Instrument Type | Flue Gas Continuous Emission Monitoring System |
| Measurement Accuracy | ±2% F.S. for ranges ≤100 mg/m³ |
| Repeatability | Span drift ≤±2% F.S./24 h |
| Response Time | ≤180 s (with heated sampling line ≤70 m) |
| Stability | Zero drift ≤±2% F.S./24 h |
| Measured Parameters | Gaseous pollutants (SO₂, NOₓ, O₂, CO, CO₂), particulate matter (PM), flue gas temperature, pressure, velocity, and humidity |
| Brand | FPI (Fortune Photonics Instrumentation) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | CEMS-2000 D |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measured Parameters | SO₂, NOₓ (NO + NO₂), O₂, H₂O (wet-basis) |
| Analytical Methods | Ultraviolet Fluorescence (SO₂), Chemiluminescence (NOₓ), Capacitive Humidity Sensing (H₂O), Zirconia Electrochemical Cell (O₂) |
| System Architecture | Dilution-extractive sampling with integrated calibration, data acquisition, and communication modules |
| Compliance Framework | Designed to support compliance with GB/T 16157, HJ 75–2017, HJ 76–2017, and compatible with EPA Method 6C / 7E / 3A / 4 for reference equivalence |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | CEMS-2000 VOC |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measured Parameters | Methane / Non-Methane Hydrocarbons (NMHC), BTEX (Benzene, Toluene, Ethylbenzene, Xylenes), Target VOC Species, Particulate Matter (PM) Concentration, Flue Gas Temperature, Pressure, and Velocity |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | CEMS-2000B |
| Instrument Type | Flue Gas Continuous Emission Monitoring System |
| Measurement Accuracy | ≤ ±1% FS |
| Repeatability | ≤ ±0.5% FS/24h (Span Drift) |
| Response Time | ≤ 200 s |
| Stability | ≤ ±1% FS/24h (Zero Drift) |
| Measured Parameters | Gaseous Pollutants (SO₂, NO, NO₂, CO, CO₂, O₂), Particulate Matter (PM), Temperature, Pressure, Flow Velocity, Humidity |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | LDM-100 |
| Instrument Type | In-Situ Optical Transmissometer for Particulate Emissions Monitoring |
| Extinction Accuracy | ±0.004 |
| Repeatability | ≤2% |
| Response Time | 1–600 s (configurable) |
| Stability | Transmittance/Turbidity ±1% |
| Compliance | Meets GB/T 16157, HJ 76–2017, and HJ 836–2017 requirements for fixed-source emission monitoring |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | Methane / NMHC Online Analyzer |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Detection Principle | Gas Chromatography with Flame Ionization Detection (GC-FID) |
| Thermal Design | Full-Stream 175 °C High-Temperature Heating |
| Column Configuration | Dual-Valve Dual-Column (Model 115) / Dual-Valve Triple-Column (Model 120) |
| Analysis Cycle Time | <90 s per cycle |
| Target Analytes | CH₄, Total NMHC, Benzene, Toluene, Xylenes (BTX) |
| Safety Feature | Auto-H₂ shutoff upon FID flameout |
| Compliance Basis | Aligned with HJ 38–2017, HJ 1012–2018, EPA Method 25A, ASTM D6420 |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ZRE |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Indication Error | ±1% FS |
| Repeatability | ≤1% FS |
| Response Time (T90) | ≤1 s |
| Stability (24 h) | ≤1% FS |
| Origin | Austria |
|---|---|
| Type | Imported Instrument |
| Model | GA-60 |
| Sensor Configuration | Standard 5 electrochemical sensors + optional IR sensors (CO₂, CH₄, N₂O) and additional electrochemical sensors (H₂S, H₂) |
| Flow Rate | 1.63 L/min (Bacharach-compliant) |
| Data Storage | 256 MB (~1 million records) |
| Display | 320 × 240 pixel backlit LCD |
| Printer | 57 mm thermal dot-matrix with graphics |
| Power | Rechargeable 12 V / 2.2 Ah lead-acid battery (10 h charge, ~6 h operation) or 110/220 V AC, 50–60 Hz |
| Dimensions | 500 × 410 × 180 mm |
| Weight | 9.5 kg |
| Operating Temperature | 10–50 °C |
| Storage Temperature | −20–55 °C |
| Humidity | 5–90 % RH (non-condensing) |
| Pressure Resolution | 1 Pa (differential), 0.1 hPa (ambient, optional) |
| Temperature Channels | Up to 8 (4 thermocouples + 4 thermistors, optional) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | COPA-3000 |
| Detection Principles | CO – Alternating Flow Modulation NDIR |
| Measurement Range (Standard) | CO: 0–200/500 ppm or 0–500/1000 ppm |
| CO₂ | 0–5/25 vol% |
| O₂ | 0–5/25 vol% |
| Accuracy | ±0.5% FS (repeatability, full scale) |
| Zero Drift | ±0.5% FS/day |
| Span Drift | ±1.0% FS/day |
| Response Time | ≤20 s (TD + T90, 3.0 L/min sample flow) |
| Sample Flow Rate | 1.5–3.0 L/min |
| Cooling Dew Point | ~5 °C (electronic cooler) |
| Output | DC 0–1 V (non-isolated), RS-232C |
| Power Supply | AC 100 V ±10%, 50/60 Hz |
| Dimensions (W×H×D) | 750 × 1054 × 710 mm |
| Weight | ~120 kg (excl. O₂ cylinder & regulator) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | EIA-51d / EIA-51p |
| Explosion Protection Type | Ex d IIB+H2 T4 (EIA-51d) / Ex p II T4X (EIA-51p) |
| Measurement Principle | Non-Dispersive Infrared (NDIR) with Interference Correction |
| Detectable Gases | CO, CO₂, CH₄ (configurable per application) |
| Range | 0–0.11 vol% to 0–100 vol% (gas-dependent) |
| Repeatability | ±0.5% F.S. (standard range) |
| Linearity | ±1.0% F.S. |
| Zero & Span Drift | ±2.0% F.S./week |
| Response Time (T90) | ≤20 s (standard), ≤40 s (optional extended range) |
| Sample Flow Rate | 500 mL/min |
| Sample Pressure | ≥1.98 kPa |
| Operating Ambient Temperature | –5 to 40 °C |
| Analog Output | Isolated 4–20 mA (DC), optional 0–10 V / 1–5 V |
| Communication Interface | RS-485 |
| Protocol | Modbus RTU |
| Baud Rates | 1200–19200 bps |
| Sample Contact Materials | SUS304, SUS316, FKM, CaF₂, Au |
| Calibration | Manual (standard), Auto (optional) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | EIA-51d / EIA-51p |
| Explosion Protection Type | Ex d IIB+H2 T4 (EIA-51d) / Ex p II T4X (EIA-51p) |
| Measurement Principle | Non-Dispersive Infrared (NDIR) with Interference Compensation |
| Detectable Gases | CO, CO₂, CH₄ (configurable per application) |
| Range | 0–0.11 vol% to 0–100 vol% (gas-dependent) |
| Minimum Detection Limit | 0–50 ppm (gas-dependent) |
| Repeatability | ±0.5% F.S. (standard range) |
| Linearity | ±1.0% F.S. |
| Zero & Span Drift | ±2.0% F.S./week |
| Response Time (T90) | ≤20 s (standard), ≤40 s (optional extended range) |
| Sample Flow Rate | 500 mL/min |
| Sample Pressure | ≥1.98 kPa |
| Operating Ambient Temperature | –5 to +40 °C |
| Analog Output | Isolated DC 4–20 mA (standard), optional 0–10 V / Modbus RTU via RS-485 |
| Sample Contact Materials | SUS304, SUS316, FKM, CaF₂, Au |
| Purge Gas | N₂ (196–690 kPa |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | EIA-51d / EIA-51p |
| Explosion Protection | Ex d IIB+H2 T4 (EIA-51d) / Ex p II T4X (EIA-51p) |
| Measurement Principle | Non-Dispersive Infrared (NDIR) with Interference Correction |
| Detection Gases | CO, CO₂, CH₄ (configurable per application) |
| Range | 0–0.11 vol% to 0–100 vol% (gas-dependent) |
| Repeatability | ±0.5% F.S. (standard range) |
| Linearity | ±1.0% F.S. |
| Zero/Scale Drift | ±2.0% F.S./week |
| Response Time (T90) | ≤20 s (standard), ≤40 s (optional extended range) |
| Sample Flow | 500 mL/min |
| Operating Ambient | –5 to +40 °C, RH <90%, vibration <0.3 m/s² @ 100 Hz |
| Analog Output | Isolated 4–20 mA (DC), optional 0–10 V |
| Communication | RS-485, Modbus RTU (selectable baud rates: 1200–19200 bps) |
| Sample Contact Materials | SUS304, SUS316, FKM, CaF₂, Au |
| Purge Gas | N₂, 196–690 kPa, 0.5 L/min (operational), 10 L/min (purge mode) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | ENDA-600ZG |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measurement Accuracy | ±1.0 %F.S. |
| Repeatability | ±0.5 %F.S. |
| Response Time (SO₂) | 60–240 s |
| Stability | ±2.0 %F.S./week |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | ENDA-600ZG |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measurement Principle | Alternating Flow NDIR + Magnetic Pressure O₂ Detection |
| Accuracy | ±0.5% F.S. |
| Repeatability | ±0.5% F.S. |
| Response Time | Td + T90 ≤ 60 s |
| Stability | ±1.0% F.S. |
| Measured Gases | SO₂, NOₓ (as NO), CO, CO₂, O₂ |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | ENDA-600ZG Series |
| Instrument Type | Flue Gas Continuous Emission Monitoring System (CEMS) |
| Accuracy | ±1.0 % FS |
| Repeatability | ±0.5 % FS |
| Response Time (SO₂) | 60–240 s |
| Stability | ±2.0 % FS/week |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | ENDA-600ZG |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measurement Accuracy | ±2.0% of reading |
| Repeatability | ±0.5% F.S. |
| Response Time (SO₂) | 60–240 s (T₉₀) |
| Long-Term Stability | ±2.0% F.S./week |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | ENDA-600ZG Series |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Accuracy | ±1.0 %F.S. |
| Repeatability | ±0.5 %F.S. |
| Response Time (SO₂) | 60–240 s |
| Stability | ±2.0 %F.S./week |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | ENDA-600ZG Series |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Accuracy | ±1.0% F.S. |
| Repeatability | ±0.5% F.S. |
| Response Time (SO₂) | 60–240 s |
| Stability | ±2.0% F.S./week |