Impact Testing Machine
Filter
Showing 61–90 of 188 results
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | JB |
| Price Range | USD 1,400–2,800 |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 2.156 J |
| Impact Velocity | Adjustable |
| Pendulum Torque (Impact Constant) | 120 N·mm |
| Load Cell Range | 100 N |
| Maximum Lifting Height | 120 mm |
| Scale Division Value | 0.028 J |
| Pendulum Raise Angle | 120° |
| Distance from Pendulum Pivot to Impact Point | 300 mm |
| Vertical Travel of Test Table | 120 mm |
| Longitudinal Travel of Test Table | 210 mm |
| Sample Dimensions | Flat plates 6–10.5 inches in diameter |
| Net Weight | 50 kg |
| Overall Dimensions | 890 × 370 × 925 mm |
| Key | Origin: Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JC-300B |
| Quotation | Available Upon Request |
| Max Impact Energy | 300 J |
| Max Drop Height | 2 m |
| Hammer Displacement Accuracy | ±2 mm |
| Max Combined Hammer Mass | 15 kg |
| Mass Tolerance per Weight | ±5 g |
| Hammer Tip Radii | SR=5, 10, 20, 30, 50 mm |
| Adjustable Hammer Masses | 1–10 kg (1 kg increments), plus 15 kg |
| Lifting Force Limit | ≤20 kgf |
| Impact Center Alignment Tolerance | ≤2 mm |
| Test Chamber Dimensions | 250 mm (H) × 300 mm (W) |
| Ring Clamps for Sheet Specimens | Φ40±1.0 mm, Φ80±2.0 mm, Φ130±2.5 mm |
| V-Notch Fixture for Pipes | 300 mm length, 120° opening angle |
| Recommended Sample Range | Pipes Φ20–Φ200 mm |
| Power Supply | AC 220 V |
| Overall Dimensions | 600×600×3100 mm |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | JH |
| Pricing | Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-XJJ-50 |
| Impact Energy | 50 J |
| Impact Velocity | 3.8 m/s |
| Pendulum Radius (Impact Constant) | R = 2 ± 0.5 mm |
| Pendulum Lifting Height | 95 mm |
| Support Span Options | 40, 60, 62, 70, 95 mm |
| Notch Knife Radius | R = 2 ± 0.5 mm |
| Anvil Radius | R = 1 ± 0.1 mm |
| Knife Angle | 30° ± 1° |
| Energy Loss (Empty Swing) | ≤2% (for 0.5–1 J), ≤1% (for 2 J), ≤0.5% (for 4–5 J) |
| Compliance | ISO 179-1, GB/T 1043.1, GB/T 2612, JB/T 8762, GB 4742 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/XJJ-50B |
| Impact Energy | 50 J |
| Impact Velocity | 3.8 m/s |
| Pendulum Radius (Impact Constant) | R = 2 ± 0.5 mm |
| Specimen Support Span | 40, 60, 62, 70, or 95 mm (adjustable) |
| Pendulum Angle | 160° |
| Hammer Blade Radius | R = 2 ± 0.5 mm |
| Anvil Radius | R = 1 ± 0.1 mm |
| Hammer Blade Angle | 30 ± 1° |
| Energy Loss (Empty Swing) | ≤2% (for 0.5–1 J), ≤1% (for 2 J), ≤0.5% (for 4–5 J) |
| Max Lift Height | 95 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/XJJ-5B |
| Impact Energy | 5 J |
| Impact Velocity | 2.9 m/s |
| Pendulum Radius (Impact Constant) | R = 2 ± 0.5 mm |
| Maximum Lifting Height | 62 mm |
| Support Span Options | 40, 60, 62, 70, 95 mm |
| Pendulum Angle | 160° |
| Hammer Blade Radius | R = 2 ± 0.5 mm |
| Anvil Radius | R = 1 ± 0.1 mm |
| Blade Included Angle | 30 ± 1° |
| Energy Loss (Empty Swing) | ≤0.5% for 4–5 J, ≤1% for 2 J, ≤2% for 0.5–1 J |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/XJU-5.5B |
| Impact Energy | 5.5 J |
| Impact Velocity | 3.5 m/s |
| Pendulum Radius (Impact Constant) | R = 0.8 ± 0.2 mm |
| Maximum Lifting Height | 95 mm |
| Standard Compliance | ISO 180, GB/T 1843, GB/T 1043, JB/T 8761 |
| Blade Angle | 30° ± 1° |
| Blade-to-Anvil Distance | 22 ± 0.2 mm |
| Energy Loss (Empty Swing) | ≤1% at 2.75 J |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-126A |
| Price Range | USD 1,400 – 7,000 |
| Instrument Category | Specialized Hydraulic Fatigue Testing System |
| Working Fluid | MIL-PRF-25017 (Type III) / JP-8 / Jet A-1 (equivalent to GJB 1905A Class 3 Kerosene-based Aviation Fuel) |
| Fluid Cleanliness | ≥ GJB 420B Level 7/A |
| Rated Pressure Range | 0–21 MPa (adjustable) |
| Test Pressure Range | 0–31.5 MPa (adjustable) |
| Medium Temperature Range | Ambient to 125 °C (adjustable |
| Temp Control Accuracy | ±2 °C |
| Heating Rate | 3 °C/min |
| Pulse Frequency | ≥1 Hz (adjustable) |
| Waveform Options | Trapezoidal, Damped Sinusoidal, Pure Sinusoidal, Return-Line Trapezoidal |
| Compliance | Designed per ISO 6803, ASTM D3783, and MIL-STD-810H Section 516.7 (Shock & Vibration Fatigue Simulation) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM5 |
| Instrument Type | Gravel Impact Resistance Tester |
| Operating Pressure Range | 0–0.8 MPa (adjustable) |
| Test Temperature | Ambient (optional low-/high-temperature chamber available) |
| Air Hose Internal Diameter | 20 mm / 15 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Tube Internal Diameter | 30 mm / 53 mm |
| Specimen Orientation | 45°, 54°, or 90° for flat panels |
| Sound Pressure Level | ≤120 dB(A) |
| Operation Mode | Continuous duty cycle |
| Impact Media | Gravel, crushed stone, calibrated abrasive particles |
| Feed Rate Control | Electromagnetic vibratory feeder |
| Airflow Pressure Regulation | Manual needle valve |
| Required External Compressor | ≥2 m³/min at 0–0.8 MPa |
| Brand | Jiubin |
|---|---|
| Model | JB-JM5 |
| Type | Stone Chip / Gravel Impact Tester |
| Pressure Range | 0–0.8 MPa (adjustable) |
| Test Media | Gravel, Sand, Calibrated Stone Chips |
| Nozzle Internal Diameter | 30 mm / 53 mm |
| Air Reservoir Volume | 136 L |
| Compressed Air Inlet ID | 15 mm / 20 mm |
| Sample Orientation | 45°, 54°, or 90° (flat specimens) |
| Operating Mode | Continuous-duty cycle |
| Noise Level | ≤120 dB(A) (hearing protection required) |
| Feed Control | Electromagnetic vibratory feeder |
| Airflow Regulation | Manual pressure regulator valve |
| Required External Air Supply | ≥2 m³/min at 0–0.8 MPa (air compressor not included) |
| Compliance | Designed per ISO 20567-1, ASTM D3170/D3171, SAE J400, and GB/T 20374 |
| Brand | Jiubin |
|---|---|
| Model | JB-JM5 |
| Type | Stone Chipping Impact Tester |
| Pressure Range | 0–0.8 MPa (adjustable) |
| Test Media | Gravel, Crushed Stone |
| Air Hose Inner Diameter | 15 mm / 20 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Inner Diameter | 30 mm / 53 mm |
| Sample Orientation Angles | 45°, 54°, 90° (flat specimens) |
| Noise Level | ≤120 dB(A) |
| Operation Mode | Continuous duty |
| Feed Control | Electromagnetic vibratory feeder |
| Air Pressure Control | Manual regulator valve |
| Required External Compressor | ≥2 m³/min at 0–0.8 MPa |
| Compliance | Designed for ASTM D3170/D3170M (Chipping Resistance of Coatings), ISO 20567-1, GB/T 5237.4, and automotive OEM specifications (e.g., GMW 14872, Ford CETP 00.00-L-467) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM6 |
| Price Range | USD 14,000 – 42,000 (FOB Shanghai) |
| Instrument Type | Gravel Impact Resistance Tester |
| Operating Temperature Range | −20 °C to −70 °C (optional cryogenic configuration) |
| Impact Window Dimensions | 300 mm × 300 mm |
| Air Reservoir Volume | 170 L |
| Adjustable Impact Angle | 0°–180° continuous |
| Compliance Standards | SAE J400, ASTM D3170, VDA 233-202, GMW 14872, Ford CETP 00.00-L-467, Mazda MHT-103, JIS D 0205, Nissan NES M0139, Toyota TSL 0601G |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB/XJJ-5 |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 5 J |
| Impact Velocity | 2.9 m/s |
| Pendulum Radius (Impact Constant) | R = 2 ± 0.5 mm |
| Maximum Lifting Height | 62 mm |
| Support Span Options | 40 mm, 60 mm, 62 mm, 95 mm |
| Hammer Blade Angle | 30° ± 1° |
| Anvil & Hammer Nose Radius | R = 1 ± 0.1 mm (anvil), R = 2 ± 0.5 mm (blade) |
| Scale Resolution | 1/100 division |
| Energy Loss in No-Load Swing | ≤0.5% |
| Compliance | ISO 179-1, GB/T 1043.1, GB/T 21189, GB/T 4742, GB/T 2611 |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB/XJU-22B |
| Impact Energy | 22 J |
| Impact Velocity | 3.5 m/s |
| Pendulum Constant (Hammer Moment) | R = 0.8 ± 0.2 mm |
| Maximum Lifting Height | 95 mm |
| Hammer Angle | 160° |
| Notch Knife Radius | R = 0.8 ± 0.2 mm |
| Distance from Knife Edge to Clamp Top | 22 ± 0.2 mm |
| Knife Included Angle | 30° ± 1° |
| Energy Loss in Null Impact (for 2.75 J & 5.5 J levels) | ≤1% and ≤0.5%, respectively |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM5 |
| Instrument Type | Stone Chip Impact Tester |
| Operating Pressure Range | 0–0.8 MPa (adjustable) |
| Test Temperature | Ambient (optional low-/high-temperature chamber available) |
| Air Hose Inner Diameter | 20 mm / 15 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Tube Inner Diameter | 30 mm / 53 mm |
| Specimen Orientation Angles | 45°, 54°, or 90° (flat specimens) |
| Sound Pressure Level | ≤120 dB(A) |
| Operation Mode | Continuous duty cycle |
| Impact Media | Gravel, crushed stone, calibrated abrasive particles |
| Feed Rate Control | Electromagnetic vibratory feeder |
| Airflow Pressure Control | Manual needle valve |
| Required Compressed Air Supply | User-provided |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JJ-20 |
| Quotation | Available Upon Request |
| Span Options | 40 mm, 60 mm, 62 mm, 70 mm, 95 mm |
| Specimen Width Range | 4–15 mm |
| Specimen Thickness Range | 3–10 mm |
| Pendulum Impact Velocity | 3.8 m/s |
| Pre-lift Angle | 150° |
| Distance from Pendulum Axis to Specimen Center | 380 mm |
| Charpy (Simply Supported Beam) Energy Levels | 4 J, 7.5 J, 15 J, 25 J |
| Izod (Cantilever Beam) Energy Levels | 5.5 J, 11 J, 22 J |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JJ-20-cczn |
| Sample Span Options | 40 mm, 60 mm, 62 mm, 70 mm, 95 mm |
| Specimen Width Range | 4–15 mm |
| Specimen Thickness Range | 3–10 mm |
| Pendulum Impact Velocity | 3.8 m/s |
| Display | LCD Digital Interface |
| Brand | Kaelge |
|---|---|
| Origin | Germany |
| Model | IMPact 5.5/15(25) |
| Impact Energy Range | 0.5–5.5 J (IMPact 5.5) |
| Compliance Standards | EN ISO 179, EN ISO 180, ASTM D 256 (Methods A & B), ISO 8256 |
| Test Configurations | Charpy (simply supported beam), Izod (cantilever beam), Tensile Impact |
| Control System | Microprocessor-based with keypad and LCD display (4-language support) |
| Output Interfaces | RS-232 serial port, parallel printer port |
| Key Functions | Automatic pendulum braking, built-in sample centering for Charpy fixtures, real-time energy calculation (absorbed energy, recovered elastic energy, rise angle, impact velocity), on-access auto-test initiation, pendulum calibration verification and report generation, FIFO storage of up to 50 test results with statistical evaluation (mean, standard deviation) |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Instrument Type | Free-Fall Dart Impact Tester |
| Standards Compliance | ASTM D1709, ISO 7765-1 |
| Impact Energy Range | As per manufacturer’s specification sheet |
| Impact Velocity | As per manufacturer’s specification sheet |
| Dart Mass Options | Standardized (e.g., 50 g, 100 g, 200 g) per ASTM/ISO |
| Maximum Drop Height | Adjustable up to 2,000 mm (typical range) |
| Load Cell Capacity | Configurable (e.g., ±500 N full scale) |
| Test Mode | Single-dart or multi-dart statistical mode (50% failure threshold determination) |
| Data Output | Analog + digital (RS-232 / USB) |
| Safety Enclosure | Interlocked transparent polycarbonate shield |
| Brand | Labthink |
|---|---|
| Model | C670M Dart |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Domestic |
| Instrument Type | Dart Impact Tester |
| Testing Methods | ASTM D1709 (Method A & B), ISO 7765-1, GB/T 9639.1-2008, JIS K7124-1 |
| Measurement Range | Method A: 50–2000 g |
| Method B | 300–2000 g |
| Mass Accuracy | ±0.5% |
| Sample Clamping | Pneumatic (0.6 MPa required, Φ8 mm polyurethane tubing interface) |
| Sample Size | >150 mm × 150 mm |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Net Weight | 70 kg |
| Dimensions (A Method) | 500 × 450 × 1320 mm (L×W×H) |
| Dimensions (B Method) | 500 × 450 × 2160 mm (L×W×H) |
| Standard Configuration | Method A setup, 7-inch color touch screen, built-in thermal microprinter |
| Optional Accessories | Method B upgrade kit, Labthink IMPACTSuite™ software, RS232 communication cable |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Model | FIT-01 |
| Impact Energy | 1 J, 2 J, 3 J |
| Impact Energy Resolution | 0.001 J |
| Puncture Tip Diameter | Φ25.4 mm, Φ19 mm, Φ12.7 mm (customizable) |
| Clamp Aperture | Φ89 mm, Φ60 mm |
| Specimen Size | 100 mm × 100 mm or Φ100 mm |
| Air Supply Pressure | 0.6 MPa |
| Air Interface | Φ6 mm polyurethane tubing |
| Dimensions (L×W×H) | 600 mm × 390 mm × 600 mm |
| Weight | 64 kg |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Standard Configuration | Base pendulum (1 J), 2 J & 3 J add-on weights, Φ25.4 mm & Φ19 mm hemispherical tips, Φ89 mm & Φ60 mm clamp sets (with O-rings), micro-printer |
| Optional | Lystem™ Lab Data Management Software, RS232 communication cable, non-standard tips, replacement O-rings |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | FIT-01 |
| Instrument Category | Pendulum Impact Tester |
| Impact Energy | 1 J, 2 J, 3 J |
| Impact Velocity | Defined by pendulum geometry (Φ89 mm & Φ60 mm anvil diameters) |
| Pendulum Moment (Impact Constant) | Configurable via interchangeable pendulum arms with effective radii corresponding to Φ25.4 mm, Φ19 mm, and Φ12.7 mm hemispherical impactors |
| Force Sensor Resolution | 0.001 J |
| Maximum Lift Height | Calibrated for 1 J, 2 J, and 3 J energy levels |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Model | FIT-01 |
| Instrument Type | Pendulum Impact Testing Machine |
| Impact Energy | 1 J, 2 J, 3 J (standard) |
| Impact Velocity | Determined by pendulum drop height per ISO/GB standards (pneumatic release at 0.6 MPa air supply, user-provided) |
| Pendulum Moment (Impact Constant) | Configurable via interchangeable pendulum arms with nominal diameters Φ25.4 mm, Φ19 mm, Φ12.7 mm |
| Force Sensor Range | 1 J / 2 J / 3 J full-scale |
| Maximum Lift Height | Φ89 mm and Φ60 mm test clamp configurations |
| Sample Holder Diameter | Φ89 mm and Φ60 mm |
| Sample Size | 100 mm × 100 mm or Φ100 mm circular |
| Resolution | 0.001 J |
| Air Supply Interface | Φ6 mm polyurethane tubing (external 0.6 MPa source required) |
| Dimensions (L×W×H) | 600 mm × 390 mm × 600 mm |
| Net Weight | 64 kg |
| Compliance | GB/T 8809–1988, ASTM D3420–2008a, NF T54-116–1973 |
| Brand | Labthink |
|---|---|
| Model | FIT-01 |
| Type | Pendulum Impact Testing Machine |
| Impact Energy | 1 J, 2 J, 3 J |
| Impact Energy Resolution | 0.001 J |
| Punch Diameter Options | Φ25.4 mm, Φ19 mm, Φ12.7 mm (customizable) |
| Clamp Aperture | Φ89 mm, Φ60 mm |
| Specimen Size | 100 mm × 100 mm or Φ100 mm |
| Air Supply Pressure | 0.6 MPa |
| Air Interface | Φ6 mm polyurethane tubing |
| Dimensions (L×W×H) | 600 mm × 390 mm × 600 mm |
| Weight | 64 kg |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Standard Accessories | Base pendulum (1 J), 2 J & 3 J add-on weights, Φ25.4 mm & Φ19 mm punches, Φ89 mm & Φ60 mm clamp sets (with O-rings), micro-printer |
| Optional Accessories | Lystem™ Lab Data Management Software, RS232 communication cable, non-standard punches, replacement O-rings |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | FIT-01 |
| Price Range | USD 7,000–14,000 (FOB) |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 1 J, 2 J, 3 J |
| Impact Velocity | Determined by pendulum arc geometry (standardized per ISO 179-1 & ASTM D3420) |
| Pendulum Moment (Impact Constant) | Configurable via interchangeable pendulum arms with effective lengths corresponding to Φ25.4 mm, Φ19 mm, and Φ12.7 mm radius-of-gyration equivalents |
| Force Sensor Range & Resolution | 0.001 J (energy resolution, derived from high-precision load cell and angular displacement integration) |
| Maximum Lift Height | Adjustable per energy level (1 J / 2 J / 3 J), calibrated to ISO-compliant pendulum geometry |
| Sample Clamp Aperture | Φ89 mm and Φ60 mm |
| Specimen Dimensions | 100 mm × 100 mm or Ø100 mm circular |
| Pneumatic Requirements | 0.6 MPa (user-supplied compressed air, Ø6 mm polyurethane tubing interface) |
| Overall Dimensions | 600 mm (L) × 390 mm (W) × 600 mm (H) |
| Compliance | GB/T 8809–2014, ASTM D3420–2008a, NF T54-116–1973, ISO 179-1 (adapted), ISO 8256 (indirect reference) |
| Brand | Labthink |
|---|---|
| Model | FIT-01 |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Domestic |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 1 J, 2 J, 3 J |
| Energy Resolution | 0.001 J |
| Impactor Tip Diameter | Φ25.4 mm, Φ19 mm, Φ12.7 mm (customizable) |
| Clamp Aperture | Φ89 mm, Φ60 mm |
| Specimen Size | 100 mm × 100 mm or Φ100 mm |
| Pneumatic Pressure Requirement | 0.6 MPa (user-supplied air source) |
| Air Hose Connection | Φ6 mm polyurethane tubing |
| Dimensions (L×W×H) | 600 mm × 390 mm × 600 mm |
| Power Supply | AC 220 V, 50 Hz |
| Net Weight | 64 kg |
| Compliance Standards | GB/T 8809–1988, ASTM D3420–2013, NF T54-116 |
| Brand | LAU |
|---|---|
| Origin | Germany |
| Model | VAS 5102A |
| Category | Portable Impact Testing Instrument for Automotive Paint Coating Evaluation |
| Compliance | PV 3.14.7, DIN 55996-1 |
| Standard Test Medium | Hardened Cast Iron Gravel (0.5–1.0 mm) |
| Impact Angle | 90° ± 2° |
| Propulsion Method | Compressed Air |
| Power Supply | Rechargeable Battery (Integrated Display Unit) |
| Calibration Interval | Annual (Traceable to DAkkS-Accredited Laboratory) |
| Accessories Included | Pressure Regulator, Air Hose, Calibration Stand, LED Inspection Torch, Adhesion Tape (25 mm Width), Scalpel & Scissors, Gravel Collection Tray, VW/Audi Sealing Labels (n=100), Transport Case |
| Warranty | 12 Months |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | LT-16 |
| Pricing | Upon Request |
| Rebound Accuracy (Relative) | <1.5% |
| Drop Height | 460 mm ±0.5% |
| Guide Tube ID | 40 mm ±4 mm |
| Steel Ball Diameter | Φ16 mm −0.15 mm |
| Steel Ball Mass | 16.7 g ±0.5 g |
| Rebound Range | 10–100% |
| Display | Digital LED |
| Specimen Dimensions | 100 mm × 100 mm × 50 mm |
| Includes | Main Unit, Control System, Two Calibration Steel Balls, Ball Retaining Ring, Four Leveling Feet, Integrated Thermal Microprinter |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | MC009-JB-300 |
| Quotation | Upon Request |
| Impact Energy | 150/300 J |
| Impact Velocity | 5.0 m/s |
| Pendulum Pre-lift Angle | 135° |
| Anvil Span | 40 mm |
| Anvil Radius (Notch Support) | R1.0–R1.5 mm |
| Striking Edge Radius | R2.0–R2.5 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Pendulum Arm Length | 800 mm |
| Overall Dimensions (L×W×H) | 1000 × 630 × 1520 mm |
| Net Weight | 320 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | MC009-JB-300B / MC009-JB-500B |
| Quotation | Available Upon Request |
| Impact Energy | 150/300 J (JB-300B) / 250/500 J (JB-500B) |
| Pendulum Pivot-to-Impact Point Distance | 750 mm (JB-300B) / 800 mm (JB-500B) |
| Impact Velocity | 5.2 m/s (JB-300B) / 5.4 m/s (JB-500B) |
| Pre-Lift Angle | 150° |
| Specimen Support Span | 40 mm |
| Anvil Radius | R1–R1.5 mm |
| Striking Edge Radius | R2–R2.5 mm and R8 ± 0.05 mm |
| Specimen Dimensions | 10 × 10 × 55 mm (standard), with optional 7.5, 5, or 2.5 mm thicknesses |