Optical Instruments
Filter
Showing 3511–3540 of 7843 results
| Origin | Imported |
|---|---|
| Manufacturer Type | Distributor |
| Model | Haoliang. |
| Image Resolution | Customizable up to 120 MP (e.g., 16,384 × 7,680) |
| Pixel Size | 50 µm or 100 µm (selectable) |
| Active Chip Area | Up to 82 mm × 39 mm (wafer-level tiling supported) |
| On-Sensor Memory | 36 GB DDR4 buffer integrated on sensor carrier PCB |
| Readout Speed | Up to 40 fps at full resolution (configurable via ROI and binning) |
| Dynamic Range | ≥85 dB (typical, 16-bit linear output) |
| Quantum Efficiency | >90% at 550 nm (back-illuminated, thinned silicon) |
| Brand | ISS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Alba-STED |
| Price | USD 680,000 (FOB New York) |
| Brand | ISS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | FLIM/FFS Upgrade Kits |
| Instrument Type | Point-Scanning Confocal Microscope |
| Time Resolution | 1 ps |
| Acquisition Range | 100 ps – 100 ms |
| Detection Channels | 8 |
| Channel Bandwidth | 65 MHz/channel |
| Detector Configuration | NDD-based Two-Photon Detection |
| Supported Platforms | Leica TCS SP8, Nikon A1/C2, Olympus FV1000/FV1200/FV3000/FVMPE-RS, Zeiss LSM 710/LSM 780 |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | Q2 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Resolution | 1×1 to 4096×4096 pixels |
| Excitation Sources | 266 nm, 355 nm, 405 nm lasers, white-light supercontinuum laser, two-photon laser |
| Detectors | High-speed hybrid detectors, extended-Infrared avalanche photodiodes (eIR-APDs), cryogenically cooled sCMOS spectrometers |
| Scanning Modules | 2D galvanometric mirrors, piezo Z-stage, closed-loop motorized XY stage |
| Scanning Mode | Galvo-based XY scanning + piezo-driven Z-axis scanning |
| Optical Zoom | 0.25×–2.5× |
| Microscope Host | Upright or inverted configuration |
| Illumination | Tungsten-halogen lamp or white LED |
| Software Suite | Dedicated FLIM acquisition software with Phasor Plot analysis module |
| Vibration Isolation Platform | 1200 mm × 1500 mm optical table |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | Q2 |
| Fluorescence Lifetime Range | 100 ps – 100 ms |
| Time Resolution | ≤1 ps |
| Counting Rate | 65 MHz/channel |
| Detection Channels | up to 8 |
| Scan Mode | Galvo-based XY scanning (5 kHz) with closed-loop motorized stage |
| Spatial Resolution | configurable from 1×1 to 4096×4096 pixels |
| Frame Rate | up to 20 fps @ 256×256 |
| Spectral Range (detection) | 350–1100 nm & 900–1700 nm |
| Excitation Options | UV–Vis–NIR lasers, supercontinuum source, single- or two-photon excitation |
| Temperature Control | 77 K – 500 K |
| Compliance | GLP/GMP-ready data audit trail, FDA 21 CFR Part 11–compatible software architecture |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | SMT-3D Nanoimaging |
| Category | Upgraded Add-on for Olympus FV1000/FV1200 Laser Scanning Confocal Microscopes |
| Detection Principle | Modulation Tracking via Feedback-Controlled Circular Beam Oscillation |
| Lateral Resolution | 20–40 nm (±2 nm) |
| Axial Precision | 2 nm |
| XY Tracking | Galvo Mirror System |
| Z Tracking | Piezo-Driven Stage |
| Data Acquisition Rate | 32–256 kHz |
| Orbit Frequency | 2 kHz |
| Detector | Internal PMT of FV1000/FV1200 + ISS Photon Counting Unit |
| Software | SimFCS (Globals Unlimited) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Ocean Optics |
|---|---|
| Origin | USA |
| Model | ISS-2 |
| Light Source Type | Tungsten-Halogen Lamp |
| Illumination Geometry | Internal (In-Cuvette) |
| Optical Path Length | 1 cm |
| Collimating Lens | 5 mm Ø, f/2, BK7 glass, f = 10 mm, SMA 905 connector |
| Filter Holder | Accepts filters up to 6.35 mm (1/4") thick |
| Base Material | Aluminum |
| Spectral Range | 360 nm – 2000 nm |
| Dimensions (L×W×H) | 155.0 × 50.0 × 53.3 mm |
| Input Power | 12 VDC / 800 mA (operating range: 7–20 VDC / 0.5–2 A) |
| Lamp Power | 5 V / 1.3 A |
| Output Power | 6.5 W |
| Lamp Lifetime | 900 h |
| Warm-up Time to Stability | ~30 min |
| Voltage Regulation Accuracy | ±0.2% |
| Cooling | Integrated axial fan beneath lamp assembly |
| Positioning Mechanism | Spring-loaded spherical screw for precise 1 cm cuvette alignment |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iStar Series |
| Sensor Format | 512 × 512 or 1024 × 1024 |
| Image Intensifier Diameter | 18 mm or 25 mm |
| Phosphor Screen | P43 or P46 |
| Minimum Optical Gate Width | 2 ns |
| Delay Resolution | 25 ps |
| Total Trigger-to-Gate Delay | 40 ns |
| Gating Technology | Intelligate™ Synchronized MCP–Photocathode Gating |
| Onboard Digital Delay Generator | Yes |
| Remote Control Interface | Wireless |
| UV Response | Optimized for deep-UV with >10⁷ on/off contrast ratio |
| Compliance | Designed for GLP/GMP-compliant time-resolved imaging workflows requiring traceable timing control |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | Hyperchromator |
| Optical Throughput | f/1.5 (standard), f/2 (optional) |
| Wavelength Range | 185–2500 nm |
| Spectral Bandwidth | 1–10 nm FWHM |
| Output Power | up to 800 µW (at grating blaze wavelength, 6 nm bandwidth, 400 µm fiber) |
| Wavelength Reproducibility | ±0.1 nm |
| Scan Speed | 40–100 nm/s |
| Input Coupling | Directly coupled to ISTEQ XWS-30 plasma source (optional external source compatibility) |
| Output Options | Fused silica fiber (SMA/FC, 100–600 µm core), free-beam with adjustable slit or collimator options |
| Control Interface | USB / RS-232 |
| Dimensions | 47 × 45 × 25 cm (W×D×H) |
| Weight | 16 kg |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-30 |
| Spectral Range | 190–2500 nm (UV configuration), 250–2500 nm (OFR configuration) |
| Spectral Radiance | up to 40 mW/(mm²·sr·nm) |
| Output Power | up to 1.5 W (free-space), up to 0.4 W (fiber-coupled, FCU) |
| Emitter Size | 100 × 200 µm |
| Lifetime | 10,000 hours |
| Spatial-Temporal Stability | ST < 0.15% |
| Dimensions | 110 × 110 × 120 mm |
| Cooling | Passive (no external cooling required) |
| Control Interface | USB-to-RS485 adapter for PC/laptop |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-30 |
| Spectral Range | 190–2500 nm (UV version) |
| Spectral Radiance | ~40 mW/(mm²·sr·nm) |
| Spatial Output Power | ~1.5 W |
| Fiber-Coupled Output Power | ~0.4 W |
| Emitter Size | 100 × 200 µm |
| Lifetime | 10,000 hours |
| Stability (STD) | <0.15% |
| Numerical Aperture | 0.5–0.55 (adjustable) |
| Dimensions (L×W×H) | 110 × 110 × 120 mm |
| Weight | 2 kg |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Cooling | Air-cooled |
| Purge Gas | High-purity N₂ or Ar (≥ Class 6), flow rate 1 L/min |
| Output Interfaces | C-mount, Thorlabs SM1, 30 mm cage system |
| Control Interface | USB-RS485 |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | XWS-65 |
| Pricing | Upon Request |
| Spectral Range | 190–2500 nm (UV configuration), 250–2500 nm (OFR configuration) |
| Spectral Radiance | up to 50 mW/(mm²·sr·nm) |
| Total Output Power | up to 3 W (free-space), up to 0.5 W (fiber-coupled) |
| Emitter Size | 250 × 500 µm |
| Lifetime | 10,000 hours |
| Spatial-Temporal Stability | STD < 0.15% |
| Lamp Medium | Xenon plasma |
| Drive Mechanism | Laser-driven electrodeless discharge |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-65 |
| Light Source Type | Laser-Pumped Plasma |
| Spectral Range | 190–2500 nm (UV-VIS-NIR) |
| Spectral Radiance | ~50 mW/(mm²·sr·nm) |
| Output Power (Free-Space) | ~3 W |
| Output Power (Fiber-Coupled) | ~0.5 W |
| Plasma Emission Size | 250 × 500 µm |
| Stability (STD) | <0.15% |
| Lifetime | 10,000 h |
| Numerical Aperture | Adjustable 0.4–0.55 |
| Cooling | Air or Water (Lamp & Controller) |
| Input Power | 100–240 V, 50/60 Hz |
| Purge Gas | N₂ or Ar, ≥Grade 6, 1 L/min |
| Lamp Housing Dimensions | 130 × 110 × 74 mm, 1.3 kg |
| Controller Dimensions | 351 × 172 × 232 mm, 8 kg |
| Output Interfaces | C-mount, Thorlabs SM1, 30 mm cage system |
| Fiber Coupling | SMA or FC (FCU version only) |
| Optional Configurations | UV-optimized (190–2500 nm) or OFR-optimized (250–2500 nm), free-space or fiber-coupled output |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-Dual Port |
| Spectral Range | 190–2500 nm (UV configuration), 250–2500 nm (OFR configuration) |
| Spectral Radiance | up to 50 mW/(mm²·sr·nm) |
| Free-Space Output Power | up to 3 W |
| Fiber-Coupled Output Power | up to 0.5 W per port |
| Emitter Size | 250 × 500 µm |
| Lifetime | 10,000 hours |
| Intensity Stability (STD) | < 0.15% |
| Fiber Interface | SMA or FC |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-R |
| Spectral Range | 190–2500 nm (UV configuration), 250–2500 nm (OFR configuration) |
| Spectral Radiance | up to 90 mW/(mm²·sr·nm) |
| Free-Space Output Power | up to 5 W |
| Fiber-Coupled Output Power | up to 1 W |
| Emitter Size | 250 × 500 µm |
| Lamp Medium | Xenon |
| Lifetime | 10,000 hours |
| Temporal Stability (ST) | < 0.15% |
| Configuration Options | Free-space and FCU (Fiber Coupling Unit) |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-X |
| Spectral Range | 190–2500 nm (UV configuration), 250–2500 nm (OFR configuration) |
| Spectral Radiance | up to 120 mW/(mm²·sr·nm) |
| Peak Radiance (High-Power Mode) | up to 200 mW/(mm²·sr·nm) |
| Output Power | up to 3 W (free-space), up to 0.6 W (FCU-coupled fiber) |
| Emitter Size | 250 × 500 µm |
| Lifetime | 10,000 hours |
| Spatial-Temporal Stability | ST < 0.15% |
| Output Options | Free-space beam or FCU fiber-coupled port |
| Configuration | Dual-port |
| Brand | ISTEQ |
|---|---|
| Origin | Netherlands |
| Model | XWS-X |
| Spectral Range | 190–2500 nm (UV), 250–2500 nm (OFR) |
| Spectral Radiance | ~120 mW/(mm²·sr·nm) |
| Spatial Output Power | ~3 W |
| Fiber-Coupled Output Power | ~0.6 W |
| Emitter Size | 250 × 500 µm |
| Lifetime | 10,000 h |
| Stability (STD) | <0.15% |
| Numerical Aperture | Adjustable 0.4–0.55 |
| Cooling | Air or Water (lamp housing & controller) |
| Input Power | 100–240 V, 50/60 Hz |
| Purge Gas | Grade 6+ N₂ or Ar, 1 L/min |
| Housing Dimensions (Lamp) | 130 × 110 × 74 mm, 1.8 kg |
| Controller Dimensions | 351 × 172 × 232 mm, 8 kg |
| Output Interfaces | C-mount, Thorlabs SM1, 30 mm cage (free-space) |
| Brand | Itioture |
|---|---|
| Origin | Taiwan |
| Manufacturer Type | OEM/ODM Producer |
| Model | XDRS-028 |
| Measurement Range (Salinity) | 0–28% w/w NaCl |
| Resolution | 0.1% |
| Accuracy | ±0.2% |
| Temperature Measurement Range | 0–40 °C |
| Temperature Accuracy | ±1 °C |
| ATC Range | 5–40 °C |
| Dimensions | 120 × 56 × 36 mm |
| Weight | 120 g |
| Display | Backlit LCD |
| Brand | Ivium |
|---|---|
| Origin | Netherlands |
| Model | Modulight |
| Light Source Type | Infrared-capable LED-based modular light source |
| Illumination Mode | External illumination |
| Spectral Output | 7 standard channels (460–740 nm + 5500K white) + 4 optional channels (365 nm, 400 nm, 4000K natural white, 3100K warm white) |
| Intensity Control | Software-controlled DC or sinusoidally modulated (10 µHz – 2 MHz) |
| Compliance | Designed for integration with Ivium electrochemical workstations (e.g., Stat, Vertex, CompactStat series) and compatible with ISO/IEC 17025-aligned electro-optical testing workflows |
| Brand | Ixblue / Ixblue Photonics |
|---|---|
| Origin | France |
| Distributor Type | Authorized Distributor |
| Import Status | Imported |
| Model | IXF-PDF (Phosphorus-Doped Fiber) |
| Active Fiber Type | Yes |
| Component Category | Optical Component |
| Raman Gain Coefficient (Typ.) | 2.5 (W·km)⁻¹ |
| P₂O₅ Concentration | High |
| Attenuation | Low |
| Splicing Loss | Low |
| Bend Loss | Low |
| Raman Shift Peak | ~1320 cm⁻¹ |
| Primary Pump Wavelengths | 1060 nm, 1310 nm |
| Output Stokes Bands | ~1240 nm (1st Stokes), ~1480 nm (2nd Stokes), ~1550 nm (3rd Stokes / C-band signal band) |
| Brand | Ixblue |
|---|---|
| Origin | France |
| Type | Active Polarization-Maintaining LMA Fiber |
| Core Diameter | 40 µm |
| Mode Field Area | 750 µm² |
| Cladding Diameter | 220 µm |
| Coating Diameter | 320 µm |
| Numerical Aperture (Core) | 0.065 |
| Cut-off Wavelength | 970 ± 30 nm |
| Pump Absorption @ 976 nm | 1.2 ± 0.2 dB/m |
| Polarization Extinction Ratio | ≥20 dB/10 m |
| Proof Test Level | 100 kpsi |
| Operating Wavelength Range | 1030–1080 nm |
| Brand | iXblue |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | LAZ-LAB-NIR |
| Wavelength Range | 780–1080 nm |
| Output Type | Continuous-wave (CW), fiber-coupled |
| Laser Chip | Monolithic DFB semiconductor (InGaAsP/InP) |
| Package | Compact OEM module with integrated TEC and photodiode monitor |
| Control Interface | USB and analog voltage inputs |
| Software | LAZ-CONTROL GUI (Windows/Linux) |
| Compliance | CE, RoHS, IEC 60825-1 Class 1 |
| Brand | Ixblue / Ixblue Photonics |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Optical Component |
| Model Series | Specialty Multicore Fiber |
| Core Count | 4–12 Cores |
| Photosensitivity | Yes (FBG-compatible) |
| Fiber Types | Active-doped (e.g., Er-doped radiation-hardened) & Passive Power Delivery Variants |
| Compliance | ITU-T G.652.D / G.657.A1 baseline architecture, compatible with standard fiber splicing and grating inscription platforms |
| Brand | Ixblue |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Optical Component |
| Model | Specialty Fiber (Single-Mode / Polarization-Maintaining / Radiation-Hardened / Dual-Clad) |
| Coating Options | Polyimide, Aluminum, Acrylate, Silicone |
| Core Material | Pure Silica |
| Compliance | ITU-T G.652.D, G.657.A1, IEC 60793-2-50 |
| Key Applications | FBG Fabrication, High-Power Laser Delivery, Radiation-Resistant Sensing, High-Temperature Interferometry |
| Brand | Ixblue Photonics |
|---|---|
| Origin | France |
| Type | Single Longitudinal Mode (SLM) DFB Fiber Laser |
| Wavelength Range | 1530–1565 nm & ~2000 nm |
| Linewidth | <100 kHz (typ.) |
| Polarization | Linear (PER >20 dB) |
| SMSR | >50 dB |
| Output Power | >10 mW (standard), >10 µW (low-noise version) |
| Optical Feedback Immunity | High |
| WDM Compatibility | Yes |
| Phase Noise | Ultra-low intrinsic (suitable for interferometric sensing) |
| Brand | Ixblue / Ixblue Photonics |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Component |
| Model | Radiation-Hardened Fiber Bragg Grating (Rad Hard FBG) |
| Component Type | Passive Optical Element |
| Radiation Tolerance | Up to 10 MGy (γ), 63 MeV protons, ~5×10¹⁹ n/cm² neutrons |
| Operating Temperature | Up to 350 °C |
| Spectral Stability | <1 pm wavelength shift under combined radiation & thermal stress |
| Radiation-Induced Attenuation (RIA) | ≤150 dB/km after 10 MGy γ-dose |
| Brand | Ixblue |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Optical Component |
| Model | Custom Spun Fiber |
| Core Structure | Elliptical Core / Tiger Core |
| Cladding Diameter | 80 µm or 125 µm |
| Operating Wavelengths | 1310 nm & 1550 nm |
| Polarization Maintenance Type | Circular (via Preform Spinning) |
| Compliance | Designed for FOCT-grade environmental stability (thermal & mechanical vibration resilience) |
| Brand | Ixblue / Ixblue Photonics |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Component |
| Model | Customizable Phase-Shifted FBG Device |
| Component Type | Precision Optical Filter Element |
| Operating Wavelengths | 795 nm, 810 nm, 1053 nm, 1064 nm, 1112 nm, C-band (1530–1565 nm), or customer-specified wavelength |
| 3-dB Bandwidth | Down to 1 GHz (0.008 nm @ 1550 nm) |
| Insertion Loss | < 1 dB @ resonance peak |
| Temperature Stability | ±1 pm/°C |
| Tuning Range | ±100 pm via strain or thermal actuation |
| Phase-Shift Engineering | Position- and magnitude-tunable for spectral line shape control |
| Compliance | RoHS-compliant |
| Brand | IXFiber |
|---|---|
| Origin | France |
| Type | Triple-Clad Rare-Earth-Doped Active Fiber |
| Wavelength Range | 1.9–2.1 µm |
| Core Diameter | 18–20 µm |
| Inner Cladding Diameter | 250–270 µm |
| Outer Cladding Diameter | 300 µm |
| Dopants | Thulium (Tm³⁺) and Holmium (Ho³⁺) |
| Application | High-Power CW and Pulsed 2 µm Fiber Lasers & Amplifiers |
| Brand | IXFiber |
|---|---|
| Origin | France |
| Product Type | Rare-Earth-Doped Double-Clad Active Fiber |
| Core NA | ≤ 0.12 |
| Cladding NA | 0.46 |
| Core Diameter | ~10–12 µm (single-mode at 1550 nm) |
| Cladding Shape | Octagonal (non-PM) / Circular (PM Panda-type) |
| Beat Length (PM) | < 2 mm |
| Background Loss (1550 nm) | < 50 dB/km |
| Power Conversion Efficiency (976 nm pump → 1550 nm signal) | > 40% |
| Proof Test Strength | 50 kpsi |
| Operating Wavelength Range | 1530–1565 nm (lasing/amplification) |