Optical Instruments
Filter
Showing 4531–4560 of 7843 results
| Brand | LTB |
|---|---|
| Origin | Germany |
| Model | MNL100 |
| Laser Type | Pulsed Gas Laser (N₂) |
| Wavelength | 337.1 nm |
| Pulse Energy (guaranteed, ≥90% after 60M shots) | ≥140 µJ (MNL103-PD) / ≥120 µJ (MNL106-PD) |
| Pulse Width | ≤3 ns |
| Repetition Rate | 1–60 Hz |
| Beam Divergence | ≤3.5 × ≤3 mrad (standard) / ≤0.5 × ≤0.3 mrad (low-divergence variant) |
| Energy Stability | ≤2% RMS |
| Trigger Jitter (output sync) | <200 ps |
| Power Supply | 24 V DC (optional 100–240 V AC adapter) |
| Certification | CE, ETL (UL/CSA/VDE/Semco), RoHS, FDA-compliant |
| Laser Class | 3B (IEC 60825-1) |
| Warranty | 60 million pulses or 2 years (120 million / 3 years optional) |
| Brand | LTB |
|---|---|
| Origin | Germany |
| Model | MNL103HP |
| Output Wavelength | 337.1 nm |
| Pulse Energy (typ., after 100M shots) | 225 µJ |
| Pulse Width | 3 ns |
| Max. Repetition Rate | 30 Hz |
| Beam Divergence | 3.5 × 3 mrad (Pulse) / 0.5 × 0.3 mrad (LD-Version) |
| Energy Stability (SD/E) | ≤ 2% |
| Timing Jitter (ext. trigger to optical pulse) | ±2.5 ns |
| Beam Size | 3 × 4 mm² (Pulse) / 4 × 2.5 mm² (LD-Version) |
| Operating Voltage | 220 V AC, no external gas or water cooling required |
| Lifetime Rating | 60M / 120M shots |
| Brand | LTB |
|---|---|
| Origin | Germany |
| Model | MNL300 |
| Laser Type | Pulsed Gas Laser (Nitrogen) |
| Wavelength | 337.1 nm |
| Pulse Energy | up to 85 µJ @ 20 Hz |
| Max. Repetition Rate | 80 Hz |
| Pulse Width | 3 ns |
| Average Power | 5 mW |
| Beam Dimensions | 3 × 4 mm |
| Beam Divergence | ≤3.5 × 3.5 mrad |
| Energy Stability | ≤2% RMS |
| Timing Jitter | ±5 ns |
| Sync Output Jitter | <0.2 ns |
| Trigger Input | Optical or TTL Electrical |
| Cooling | Air-cooled |
| Power Supply | 24 V DC, 60 W |
| Certifications | CE, ETL (ANSI/UL 61010-1, CAN/CSA C22.2#61010-1), FDA-compliant |
| Brand | LTB |
|---|---|
| Origin | Germany |
| Model | MNL330 |
| Laser Type | Pulsed UV Gas Laser (N₂) |
| Wavelength | 337.1 nm |
| Pulse Energy | up to 40 µJ (typ. 15 µJ @ 300 Hz) |
| Repetition Rate | up to 300 Hz |
| Pulse Width | 3 ns (FWHM) |
| Spectral Bandwidth | ≤ 0.1 nm |
| Beam Dimensions | 1.5 × 2 mm |
| Beam Divergence | ≤ 3.5 × 3.5 mrad |
| Energy Stability | ≤ ±2% (RMS, over 8 hrs) |
| Timing Jitter (Ext. Trigger → Pulse) | ±5 ns |
| Pulse Delay (Ext. Trigger → Pulse) | 1600 ns ±10% |
| Sync Output Jitter (Optional) | < 0.2 ns |
| Power Supply | 24 V DC, 60 W (with optional 100–240 V AC, 50–60 Hz adapter) |
| Cooling | Air-cooled |
| Laser Class | 3B (IEC 60825-1) |
| Lifetime | ≥ 200 million pulses or 2 years (whichever occurs first) |
| extended warranty option | 120 million pulses / 3 years |
| Dimensions (L×W×H) | 300 × 87 × 87 mm |
| Net Volume | 2.2 L |
| Compliance | CE, RoHS, EN 60825-1, EN 61000-6-3/6-4 |
| Brand | LTB |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | UDL |
| Core Technology | Pulsed Dye Laser with Intracavity SHG |
| Pump Compatibility | MNL-series N₂ lasers (337 nm), excimer lasers (308/351 nm), frequency-doubled Nd:YAG (355/266 nm) |
| Tuning Range | 400–950 nm (fundamental), 225–400 nm (SHG) |
| Output Bandwidth | UDL100: 5–8 nm |
| UDL200 | ≤2 nm |
| Conversion Efficiency | up to 30% (UDL100, dye only), 6% (UDL200 + SHG) |
| Repetition Rate | up to 50 Hz |
| Beam Diameter | 1.5 mm |
| Beam Divergence (v × h) | 1 × 2 mrad |
| Dimensions | 115 × 250 × 170 mm |
| Weight | 1.5 kg |
| Warranty | 1 year |
| Brand | Luchike |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Optical Component |
| Model | Integrating Sphere and Standard Diffuse Reflectance Panel |
| Available Sizes | 20 mm, 30 mm, 50 mm (internal diameter) |
| Spectral Range | 200–2500 nm |
| Coating Options | Barium Sulfate (BaSO₄), Polytetrafluoroethylene (PTFE), Gold (Au) for NIR/SWIR |
| Component Type | Optical Instrument Component |
| Brand | Luchu Technology |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GY-DL310 |
| Light Source Type | Deuterium + Tungsten-Halogen Dual Broadband Source |
| Spectral Range | 200–2500 nm |
| Output Interface | SMA905 Fiber Coupling Port |
| Power Adjustment | Continuously Variable (Analog/Digital Control) |
| Compliance | CE-marked per EN 61000-6-3 & EN 61000-6-4 |
| Brand | Luchu Technology |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | GY-HL05 |
| Light Source Type | Tungsten-Halogen Lamp |
| Optical Output Power | 5 W |
| Fiber Coupling Interface | SMA 905 |
| Dimensions | Palm-Sized (≈65 × 45 × 32 mm) |
| Spectral Range | ~350–2500 nm (typical halogen continuum) |
| Operating Lifetime | ≥2000 h (at rated power, stable filament temperature) |
| Brand | Luchu Technology |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GY-J-Hg / GY-J-Xe |
| Light Source Type | Mercury-Argon Discharge Lamp (GY-J-Hg) & Continuous Xenon Arc Lamp (GY-J-Xe) |
| Spectral Range (GY-J-Hg) | 200–1100 nm |
| Spectral Range (GY-J-Xe) | 900–1900 nm |
| Fiber Interface | SMA905 |
| Compliance | Designed for ISO/IEC 17025-compliant wavelength calibration workflows |
| Intended Use | Primary and secondary wavelength calibration of spectrometers, monochromators, and optical spectrum analyzers |
| Brand | LUDL |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BioPrecision2 |
| Pricing | Contact for Quote |
| Brand | Lufft |
|---|---|
| Origin | Germany |
| Model | SHM31-UMB |
| Measurement Principle | Time-of-Flight (ToF) Laser Ranging |
| Laser Source | Class 1, 905 nm Pulsed Semiconductor Laser |
| Range | 0.2–30 m (typical snow depth measurement up to 20 m) |
| Resolution | 1 mm |
| Accuracy | ±5 mm or ±0.5 % of reading (whichever is greater) |
| Beam Divergence | < 3 mrad |
| Operating Temperature | –40 °C to +60 °C |
| IP Rating | IP67 |
| Output Interface | SDI-12, RS-232, RS-485, UMB-ASCII, UMB-Binary |
| Power Supply | 6–30 VDC |
| Power Consumption | < 1.5 W (standby), < 3 W (active measurement) |
| Mounting | Adjustable tilt compensation via integrated dual-axis inclinometer |
| Brand | Lufft |
|---|---|
| Model | VS2K/VS20K-UMB |
| Measurement Principle | Forward Scattering (Infrared, 850 nm) |
| Operating Temperature Range | –40 °C to +60 °C |
| IP Rating | IP66 |
| Output Interfaces | RS-485 (UMB protocol), 4–20 mA analog, optional SDI-12 |
| Detection Range | 10 m to 75 km (VS2K) |
| Power Supply | 12–30 VDC |
| Housing Material | Anodized aluminum with anti-icing downward tilt design |
| Compliance | WMO Guide to Meteorological Instruments and Methods of Observation (CIMO Guide), EN 60529, IEC 61326-1 |
| Brand | Lumencor |
|---|---|
| Origin | USA (Imported) |
| Distributor | Auniontech (Authorized Distributor) |
| Model | Spectra X / Sola / Zyla Series (Multi-Channel Solid-State Light Engine) |
| Power Supply | 100–240 V AC, 50–60 Hz |
| Dimensions | 145 mm × 340 mm × 203 mm (W × L × H) |
| Weight | 8.7 kg |
| Control Interfaces | Ethernet (TCP/IP & embedded GUI), USB/RS232 (on/off & intensity), TTL (per-channel gating) |
| Safety | Dual interlock system (mechanical key + electronic remote enable) |
| Embedded Controller | Onboard microprocessor with server/client architecture and command library |
| Brand | Lumencor |
|---|---|
| Model Series | SOLA / PEKA / LIDA |
| Light Source Type | High-Power Broadband LED-Based White Light Source |
| Spectral Range | 400–750 nm (SOLA), 500–600 nm enhanced (Green-Yellow “Gap” Mitigation), NIR up to 850 nm (SOLA V-nIR/U-nIR) |
| Output Power | 3–4 W (SOLA), 85 mW (PEKA), 90 mW (LIDA RGB) |
| Color Temperature | ~6000 K (PEKA, stable vs. intensity) |
| Modulation | TTL/Analog, <10 µs rise/fall time (LIDA), software-controllable via USB/Ethernet |
| Compliance | CE, RoHS, FDA-compliant design for IVD and research-use-only (RUO) instrumentation |
| Cooling | Active thermoelectric + convection, fanless operation options available |
| Brand | Lumencor |
|---|---|
| Model | SPECTRA X |
| Light Source Type | Solid-State LED-Based Multi-Band Excitation Source |
| Channels | 5 Independently Controllable |
| Output Power per Channel | 200–1000 mW |
| Spectral Range | 365–770 nm (with enhanced green/yellow output via proprietary LightPipe™ technology, 500–600 nm) |
| Power Stability | Active Feedback-Controlled |
| Control Interface | USB/RS-232/Ethernet |
| Output Coupling | Fiber or Light Guide Adapter Included |
| Compliance | CE, RoHS, FDA 21 CFR Part 11 Ready (via optional software audit trail) |
| Brand | Lumenera |
|---|---|
| Origin | Canada |
| Model | Industry Camera Series (Lu/Lw Series) |
| Interface | USB 2.0 |
| Sensor Types | CCD & CMOS |
| Resolution Range | 0.5 MP to 16 MP |
| Dynamic Range Options | 8/10/12-bit |
| Pixel Size Range | 3.45–7.4 µm |
| Sensor Sizes | 1/3" to >2/3" |
| I/O | Up to 4 IN & 4 OUT |
| Compliance | DirectShow/DirectX Compatible |
| Operating System Support | Windows 7/8/10/11 (x64/x86) |
| SDK Provided | Yes |
| Distribution Model | Authorized Distributor |
| Brand | Lumenera |
|---|---|
| Origin | Canada |
| Model Series | INFINITY 1 (CMOS), INFINITY 2 (CCD) |
| Interface | USB 2.0 |
| Sensor Types | CMOS (INFINITY 1), Interline CCD (INFINITY 2) |
| Resolution Range | 1.3–5.0 MP (INFINITY 1), 1.4–3.3 MP (INFINITY 2) |
| Pixel Sizes | 2.2–4.65 µm |
| Full-Frame Frame Rates | 5–20 fps (INFINITY 1), 5–15 fps (INFINITY 2) |
| ROI & Binning Support | Yes |
| Dynamic Range | >60 dB (CMOS), >66 dB (CCD) |
| Bit Depth | 8/10-bit (CMOS), 8/12-bit (CCD) |
| Compliance | RoHS, CE, FCC Class B |
| Brand | Lumenera |
|---|---|
| Origin | Canada |
| Model | INFINITY 4-11 |
| Sensor Type | Kodak KAI-11002 CCD |
| Resolution | 4008 × 2672 pixels (11 MP) |
| Pixel Size | 9 µm |
| Full-Frame Readout Speed | 3.5 fps |
| ROI & Binned Readout Speed | >60 fps |
| Dynamic Range | >65 dB |
| Bit Depth | 8/12-bit |
| Color Option | Monochrome or Color |
| Interface | USB 2.0 |
| Sensor Format | 35 mm (full-frame) |
| Brand | Lumenera |
|---|---|
| Origin | Canada |
| Model | INFINITY X-21 / INFINITY X-32 |
| Sensor Type | Monochrome or Color CCD |
| Sensor Size | 1/2" (X-21) / 1/8" (X-32) |
| Resolution | 21 MP (1280×1024) / 32 MP (1616×1216) |
| Pixel Size | 5.2 µm (X-21) / 4.4 µm (X-32) |
| Frame Rate | 15 fps @ full resolution (X-21), 12 fps @ full resolution (X-32) |
| Dynamic Range | >60 dB (X-21) / >66 dB (X-32) |
| Bit Depth | 8-bit / 10-bit |
| Interface | USB 2.0 |
| Compliance | RoHS, CE, FCC Class B |
| Brand | Lumenera |
|---|---|
| Origin | Canada |
| Model | INFINITY3-1U |
| Sensor | Sony ICX285 Interline CCD |
| Resolution | 1392 × 1040 (1.4 MP) |
| Pixel Size | 6.45 µm |
| Full-Frame Readout Speed | 15 fps |
| ROI & Binning Support | Yes |
| Dynamic Range | >66 dB |
| Bit Depth | 8/12-bit |
| Interface | USB 2.0 |
| Cooling | Thermoelectric (Peltier) |
| Sensor Format | 2/3″ |
| Brand | Lumenera |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Lt225 |
| Imaging Sensor | CMOSIS CMV2000 (Color/Monochrome/NIR) |
| Sensor Size | 2/3" |
| Pixel Size | 5.5 × 5.5 µm |
| Resolution | 2048 × 1048 pixels |
| ROI Control | Any multiple of 8 × 8 |
| Frame Rate | 170 fps at full resolution |
| Bit Depth | 8-bit or 12-bit selectable |
| Gain Range | 1.0–1.6× |
| Dynamic Range | 60 dB |
| Full Well Capacity | 13,500 e⁻ |
| Peak Quantum Efficiency | 45% (color), 64% (monochrome) |
| Read Noise | 13 e⁻ |
| Dark Current | 125 e⁻/s (@25 °C die temperature) |
| Interface | USB 3.0 with micro locking connector |
| Lens Mount | C-Mount |
| Dimensions | 40 × 40 × 53 mm |
| Mass | 138 g |
| Brand | Lumi-Universe |
|---|---|
| Model | Qingluan |
| Wavelength Range | 100–200 nm |
| Output Power | 1 mW – 1 W |
| Pulse Duration | < 100 fs |
| Repetition Rate | 1–10 MHz |
| Beam Size (Output Aperture) | Ø3–5 mm (collimated, TEM₀₀-like) |
| Spatial Coherence | High (λ/10 wavefront error typical) |
| Tunability | Monochromatized & continuously tunable across range |
| Cooling | Active air/water hybrid |
| Vacuum Interface | CF-63 or DN40 ISO-KF flange |
| Dimensions | 885 × 420 × 233 mm |
| Weight | 55 kg |
| Compliance | CE, RoHS, EN 61000-6-3/-4 |
| Brand | Lumics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Final Assembly | China |
| Model | LU1064M200 |
| Output Power | 200 mW (CW) |
| Wavelength | 1064 nm |
| Spectral Linewidth | <0.1 nm (FBG-stabilized) |
| Fiber Output | SMF-28, FC/APC connector |
| Package | 14-pin butterfly with TEC and thermistor |
| Operating Temperature Range | 15–35 °C |
| Cooling | Integrated Thermo-Electric Cooler (TEC) |
| Beam Quality | M² < 1.1 |
| Polarization Extinction Ratio | >20 dB |
| Brand | Thorlabs |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Q-32-R |
| Price | USD 500 |
| Brand | LUQI |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GY-HL20 |
| Light Source Type | Tungsten-Halogen Lamp |
| Maximum Power | 20 W |
| Optical Interface | SMA905 Fiber Coupling Port |
| Spectral Stability | High (Typical Drift < ±0.5% over 1 hr at Constant Power) |
| Spectral Range | ~350–2500 nm (Continuum Emission) |
| Brand | Lyncee Tec |
|---|---|
| Origin | Switzerland |
| Model | DHM |
| Measurement Principle | Digital Holographic Microscopy (Single- and Dual-Wavelength Interferometric Phase Imaging) |
| Vertical Resolution | 0.2 nm (single-wavelength), 50 nm (dual-wavelength) |
| Vertical Repeatability | <0.01 nm |
| Vertical Scan Accuracy | 0.1 nm |
| Lateral Resolution | 300 nm (with 1.4 NA oil immersion objective) |
| Field of View | 0.3–18 mm (objective-dependent) |
| Hologram Acquisition Speed | up to 15 fps (1024×1040 pixels), optional 30 fps |
| Reconstruction Rate | 15 fps @ 512×512, 4 fps @ 1024×1040 (single-wavelength) |
| Dual-Wavelength Scan Time | 1.5 s |
| Z-Scan Speed | 6 µm/s |
| Digital Focus Range | up to 50× depth of field |
| Illumination Intensity | <1 µW/cm² |
| Camera | 1392×1040 px, 8-bit monochrome CMOS |
| Software | Koala™ (C++/.NET-based, GLP-compliant workflow architecture) |
| Brand | Lyncee Tec |
|---|---|
| Origin | Switzerland |
| Model | DHM-R1000 |
| Light Source | Single-wavelength laser (666 nm ± 0.1 nm) |
| Vertical Resolution | 0.3 nm |
| Vertical Measurement Range | Up to 200 µm |
| Maximum Step Height (Sharp Edge) | Up to 333 nm |
| Surface Compatibility | Smooth reflective surfaces |
| Frame Rate | Up to 1000 fps (full resolution 1024 × 1024) |
| Response Time | Standard 500 µs, optional 10 µs |
| Horizontal Resolution | Down to 300 nm (objective-dependent) |
| Field of View | 5 µm × 5 µm to 66 µm × 66 µm (objective-dependent) |
| Working Distance | 0.3 mm to 18 mm (objective-dependent) |
| Minimum Sample Reflectivity | <1% |
| Illumination Intensity | As low as 1 µW/cm² |
| Software Platform | Koala (C++/.NET), binary & TIFF export, ASCII-compatible data output |
| Brand | Lyncée Tec |
|---|---|
| Origin | Switzerland |
| Model | DHM-T1000 |
| Laser Wavelength | 666 nm |
| Vertical Resolution | 2.0 nm |
| Vertical Accuracy | 1.0 nm |
| Repeatability | 0.02 nm |
| Vertical Measurement Range | up to 500 µm |
| Maximum Step Height (Sharp Edge) | up to 1.0 µm |
| Response Time | 500 µs (standard), optional 10 µs |
| Frame Rate | 30 fps (standard), optional up to 1000 fps |
| Hologram Reconstruction Rate | 25 fps (1024×1024 pixels), optional up to 60 fps |
| Lateral Resolution | down to 300 nm (objectives-dependent) |
| Field of View | 66 µm × 66 µm to 5 mm × 5 mm |
| Working Distance | 0.3–18 mm (objectives-dependent) |
| Digital Focus Depth Enhancement | up to 50× depth of field |
| Sample Illumination Intensity | as low as 1 µW/cm² |
| Brand | Lyncee Tec |
|---|---|
| Origin | Switzerland |
| Model | DHMT1001 |
| Light Source | Single-wavelength laser |
| Camera Resolution | 1392 × 1040 pixels, 8-bit |
| Vertical Resolution | 0.2 nm (instantaneous, in air) |
| Lateral Resolution | 300 nm (with 100× oil immersion objective, NA 1.4) |
| Imaging Speed | 15 fps at 512 × 512, 4 fps at 1024 × 1024 |
| Field of View | Up to 4.40 mm (dependent on objective) |
| Sample Stage | Manual XYZ (25 mm travel), optional motorized 2-/3-axis control |
| Software | Koala Software (C++/.NET, Windows XP-compatible) |
| Power Supply | 85–260 VAC, 50/60 Hz, <120 W |
| Dimensions | 400 × 400 × 500 mm, 34.5 kg |
| Brand | Lyncee Tec |
|---|---|
| Origin | Switzerland |
| Model | DHM™ R2100 |
| Vertical Resolution | 10 nm |
| Lateral Resolution | 300 nm (at 1.4 NA) |
| Field of View | 4.4 mm |
| Camera | 1392 × 1040 pixels, 8-bit |
| Frame Rate | 15 fps (1024 × 1024), up to 10,000 fps (region-of-interest) |
| Light Intensity on Sample | <1 µW/cm² |
| Maximum Sample Size | 200 mm × 200 mm |
| XYZ Stage Travel | 200 mm × 100 mm × 15 mm |
| Digital Refocusing Range | Up to 50× depth of field |
| Exposure Time | <1 µs |
| Power Supply | 85–260 VAC, 50/60 Hz, 480 W |
| Dimensions | 500 × 500 × 500 mm |
| Weight | 34.5 kg |