Optical Measurement Instruments
Filter
Showing 3061–3090 of 3894 results
| Brand | Radiant Zemmax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Models | IS-LI, IS-VA, IS-SA |
| Pricing | Available Upon Request |
| Brand | Radiant ZEMAX |
|---|---|
| Origin | USA |
| Model | IS-LI |
| Type | Near-Field Imaging Measurement System for Angular Radiometric and Photometric Characterization |
| Application Scope | LED Light Sources, Flat Panel Displays (FPD), Diffusing Materials, Optical Films, Surface Scatter Analysis |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | NFMS0400 / FPMS0400 |
| Type | Near-Field Measurement System for Luminaires |
| Compliance | Supports IESNA LM-79, CIE S 025, ISO/CIE 19476 |
| Software Platform | TrueTest™ v7.0+ |
| Detector Options | ProMetric® Y-series (luminance) and I-series (chromaticity) imaging photometers |
| Angular Range | ±90° in azimuth, ±90° in elevation |
| Spatial Resolution | Up to 9M pixels per image |
| Dynamic Range | ≥1,000,000:1 (typical with HDR acquisition) |
| Calibration Traceability | NIST-traceable luminance & chromaticity standards |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | PM-1200 Series |
| Sensor Type | 12-bit CCD with CIE-matched optical filters |
| Measurement Capabilities | Luminance (cd/m²), Illuminance (lux), Radiance (W/sr·m²), Irradiance (W/m²), Luminous Intensity (cd), Radiant Intensity (W/sr) |
| Spatial Resolution | Up to 2.3 megapixels (configurable by model variant) |
| Dynamic Range | >1,000,000:1 (with electronic exposure control) |
| Compliance | ISO/CIE-compliant photometric and radiometric calibration traceable to NIST |
| Software Platform | ProMetric® v3.x or later (supports ASTM E308, CIE 15:2018, IEC 62368-1, and MIL-STD-3009 NVIS requirements) |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | PM-1400F Series |
| Sensor Resolution | 768×512 / 1536×1024 / 3072×2048 pixels |
| ADC Dynamic Range | 14 bits (16,384 gray levels) |
| Luminance Range | 0.001 to 10¹⁰ nit (with ND filters) |
| Photometric Accuracy | Illuminance ±3%, Luminance (Y) ±3%, Chromaticity (x,y) ±0.003 |
| Short-Term Repeatability | Illuminance <±0.5%, Luminance <±0.5%, Chromaticity ±0.0006 |
| FOV Options | 1°–26° / 3°–50° / 5°–87° |
| Measurement Time (at 100 cd/m²) | 1.8–25 s depending on resolution |
| Interface | USB 2.0 |
| Dimensions | 154 × 242 × 200 mm |
| Weight | 4.8 kg |
| Operating Temperature | 0–30 °C |
| Operating Humidity | 20–70% RH (non-condensing) |
| Photometric Units | cd/m², cd/cm², fL, nit, mnit, W/sr/m², lux, fc, W/m², cd/sr, CIE (x,y), (u′,v′), CCT (K) |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | PM-1600F Series |
| Detector Type | TE-Cooled Scientific CCD |
| Resolution | 512 × 512 or 1024 × 1024 pixels |
| Dynamic Range | 16-bit (65,536 gray levels) |
| Minimum Luminance | 0.0005 cd/m² |
| Maximum Luminance (with ND filters) | 10¹⁰ cd/m² |
| Photometric Accuracy | ±3% for luminance (Y) and illuminance |
| Chromaticity Accuracy | ±0.003 in CIE x,y |
| Short-Term Repeatability | <±0.5% for luminance, ±0.0006 in CIE x,y |
| Measurement Time (at 100 cd/m²) | 2–9 sec depending on resolution and binning |
| FOV Range | 2°–38° (512×512), 5°–80° (1024×1024) |
| Interface | USB 2.0 |
| Dimensions | 154 mm (H) × 242 mm (W) × 200 mm (D) |
| Weight | 4.8 kg |
| Operating Temperature | 0–30 °C |
| Operating Humidity | 20–70% RH (non-condensing) |
| Software | ProMetric® v5.x or later |
| Compliance | ASTM E308, ISO/CIE 11664, CIE 15:2018, USP <1058>, FDA 21 CFR Part 11 (audit trail & electronic signature support) |
| Brand | Radiant Zemmax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | PM-I |
| Pricing | Available Upon Request |
| CCD Resolution | 3296 × 2472 px (Standard), 4896 × 3264 px (High-Resolution Option) |
| Dynamic Range | 12-bit (4096 grayscale levels) |
| Luminance Range | 0.01 to 10¹⁰ nit (with ND filters) |
| Photometric Accuracy | Illuminance ±3%, Luminance (Y) ±3%, Chromaticity (x,y) ±0.003 |
| Short-Term Repeatability | Illuminance <±0.5%, Luminance <±0.5%, Chromaticity ±0.0006 |
| Measurement Speed (100 cd/m²) | Luminance-only: 0.7 s |
| Luminance + Chromaticity | 3.7 s |
| Lens Options | 20 mm, 35 mm, 50 mm, 100 mm macro |
| Focus & Aperture | Motorized |
| Display | 125 mm diagonal LCD touchscreen (800 × 600) |
| Interface | USB 2.0/3.0, Gigabit Ethernet |
| Dimensions | 181 × 238 × 230 mm (H × W × D) |
| Weight | 4.9 kg |
| Operating Temperature | 0–30 °C |
| Operating Humidity | 20–70% RH (non-condensing) |
| Brand | Radiant Vision Systems (formerly Radiant Zemax) |
|---|---|
| Origin | USA |
| Model Series | ProMetric |
| Sensor Types | 10-bit, 14-bit, and 16-bit scientific-grade cooled CCD/CMOS imagers |
| Dynamic Range | Up to 1,000,000:1 (depending on model and configuration) |
| Spatial Resolution | Up to 29 megapixels (IC-PMIXX) |
| Measurement Capabilities | Luminance, Illuminance, Luminous Intensity, Luminous Flux, Radiance, Irradiance, Radiant Intensity, Radiant Flux, CIE x,y & u',v' Chromaticity, Correlated Color Temperature (CCT) |
| Compliance | NIST-traceable calibration, ISO/CIE-compliant photometric and colorimetric response |
| Software Platform | TrueTest™ and PM-Series™ software with FDA 21 CFR Part 11–compliant audit trail options |
| Interface | GigE Vision, USB3, or Camera Link (model-dependent) |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SIG-300 |
| Pricing | Upon Request |
| CCD Type | Full-frame, thermoelectrically cooled CCD |
| CCD Dynamic Range | 16-bit (65,536:1) |
| Resolution Options | 512 × 512 or 1024 × 1024 pixels |
| FOV (Standard) | 2 mm, 4 mm, 8 mm (512×512) |
| FOV (Micro Extension) | 0.5 mm, 1.2 mm |
| FOV (Large Extension) | 40 mm, 80 mm |
| Color Filter Set | CIE 1931 XYZ tristimulus filters |
| Neutral Density Filters | ND0 to ND5 |
| Polar Rotation Range | −10° to +370° |
| Azimuthal Tilt Limit | ±24° from lamp axis |
| Angular Step Resolution | 0.10°/min |
| Mechanical-Optical-Software Runout | < 0.025 mm |
| System Dimensions | 120 cm × 77 cm × 177 cm |
| Minimum Operating Footprint | 120 cm × 120 cm |
| Mass | 360 kg |
| Structural Frame | Welded steel cast housing with thermal stability design |
| Software Platform | SIG 2.0 — supports luminance, illuminance, chromaticity (CIE x,y |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | SIG-310 |
| CCD Type | Full-frame, thermoelectrically cooled CCD |
| Dynamic Range | 16-bit (65,536:1) |
| Resolution Options | 512 × 512 or 1024 × 1024 pixels |
| FOV (Standard) | 6–160 mm (512×512) |
| FOV (Macro) | 300 mm (512×512 only) |
| Color Filters | CIE 1931 XYZ tristimulus with ND filters (ND0–ND5) |
| Polar Rotation | −10° to +370° |
| Azimuthal Tilt | ±20° from lamp axis |
| Angular Step Resolution | 0.10°/min |
| Mechanical-Optical-Software Runout | ≤0.100 mm |
| System Dimensions | 145 cm × 133 cm × 204 cm |
| Operating Footprint | 343 cm × 312 cm |
| Weight | 640 kg |
| Structural Frame | Welded steel cast body with thermal-stability design |
| Software | SIG 2.0 — supports luminance, illuminance, chromaticity (CIE x,y |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SIG-400 |
| Pricing | Upon Request |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | SIG300 / SIG310 / SIG400 |
| Application Scope | Near-field luminance, chromaticity, and angular intensity distribution measurement of LEDs, lamp modules, and compact light sources |
| Compliance Framework | Supports ASTM E308, CIE 127, IES LM-79, ISO/CIE 11664 (colorimetry), and FDA/ISO 13485-aligned quality documentation workflows |
| Software Integration | Fully compatible with ProSource® v10+ for RSM generation, ray set export (IES, EULUMDAT, ASAP, LightTools, TracePro), GLP/GMP audit trail logging, and 21 CFR Part 11–compliant user access control |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | VisionCAL |
| Type | Imaging Colorimeter-Based Display Calibration System |
| Application | Pixel-Level Luminance & Chromaticity Calibration of LED Displays |
| Compliance | Designed for ISO 11664, CIE S 014-2/E:2022, and ASTM E308-23 workflows |
| Software Architecture | Windows-based, FDA 21 CFR Part 11–ready audit trail support (optional), GLP/GMP-compatible data logging |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | ZEMAX 13 |
| Type | Optical Design & Illumination Simulation Software |
| Compliance | ASTM E284, ISO/CIE 11664 (Colorimetry), USP <1059>, FDA 21 CFR Part 11 (via optional audit trail module) |
| CAD Integration | Native bidirectional sync with SolidWorks®, Autodesk Inventor®, Creo Parametric® |
| File Formats | STEP, SAT, IGES, STL, IES, LDT, ZMX, FRED, ASAP, LightTools® import/export |
| Programming Interface | ZPL (Zemax Programming Language), MATLAB® interoperability, COM/ActiveX, .NET API, user-defined DLL support |
| Optical Engine | Hybrid sequential/non-sequential ray tracing engine with physical optics propagation (Gaussian, Laguerre-Gaussian, TEM modes), BSDF material modeling, GRIN media, polarization & thin-film stack analysis |
| License Type | Perpetual or subscription-based floating/network license |
| Brand | Radiantis |
|---|---|
| Origin | Spain |
| Model | Oria Blue SHG Module for Ti:Sapphire Oscillators |
| Tuning Range | 340–550 nm (from 680–1080 nm fundamental) |
| Avg. Output Power | >1.2 W @ 410 nm |
| Pulse Width Preservation | <150 fs (fs regime), <180 fs (ps regime) |
| Repetition Rate | 80 MHz |
| Beam Mode | TEM₀₀ |
| Dimensions | 200 × 364 × 155 mm |
| Compliance | CE, RoHS |
| Software Control | Oria Blue Control Suite (Windows-based, USB interface) |
| Mounting | Kinematic, alignment-free platform compatible with standard optical tables |
| Brand | Raicol |
|---|---|
| Origin | Israel |
| Crystal Type | Periodically Poled KTiOPO₄ (PPKTP) |
| Model | PPLN-OPG (Note: Mislabeling — actual material is PPKTP, not PPLN) |
| Aperture | 1 × 2 mm² |
| Length | Up to 30 mm |
| Transmission Range | 400–4000 nm |
| Surface Flatness | λ/10 @ 633 nm |
| Parallelism | <30 arc sec |
| Perpendicularity | <15 arc min |
| Surface Quality | 10/5 (MIL-PRF-13830B) |
| Coating Options | AR / HR / PR (custom broadband or wavelength-specific) |
| Brand | AOLONG |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | HENT31-021A |
| Price | Upon Request |
| Radiation Types Detected | γ and X-rays (60 keV – 1.33 MeV) |
| Dose Rate Range | 0.01 µSv/h – 300 µSv/h |
| Cumulative Dose Range | 0.1 µSv – 1 Sv |
| Count Rate | 1 – 10,000 cps |
| Dose Rate Accuracy | < ±15% |
| Power Supply | 2 × AA batteries |
| Ingress Protection | IP65 |
| Operating Temperature | −10 °C to +50 °C |
| Brand | Rayscience |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BOA |
| Core Component | Semiconductor Laser-Based Optical Pulse Compression System |
| Prism Material | PBH-71 |
| Wavelength Range (BOA-8) | 750–1050 nm |
| Wavelength Range (BOA-10) | 1000–1100 nm |
| GDD Range @ 800 nm | −14,000 to +150 fs² |
| GDD Range @ 1000 nm | −7,000 to +800 fs² |
| Transmission Efficiency | >70% @ 800 nm, >75% @ 1000 nm |
| Maximum Bandwidth (at Minimum GDD) | 300 nm (BOA-8), 100 nm (BOA-10) |
| Maximum Bandwidth (near Maximum GDD) | 40 nm (BOA-8), 60 nm (BOA-10) |
| Peak Power Handling | Up to 500 MW |
| Brand | Rayscience |
|---|---|
| Model | C00109 |
| Output Power | ≥350 W CW at Fiber End |
| Center Wavelength Options | 805–810 nm, 915 nm, 940 nm, 975–980 nm |
| Wavelength Tolerance | ±10 nm (±3 nm / ±2 nm for selected options) |
| Spectral Width (FWHM) | <8 nm (<5 nm for narrow-line options) |
| Wavelength Temperature Drift | ~0.3–0.4 nm/K |
| Operating Temperature | +15 to +30 °C |
| Storage Temperature | −20 to +60 °C |
| Required Cooling Capacity | >1000 W |
| Chiller Flow Rate | <5 L/min |
| Water Pressure | 4 bar |
| Water Temperature | 20 °C |
| Fiber Core Diameter | 400 µm ±2% |
| Numerical Aperture | 0.22 |
| Connector Type | LD80 |
| Laser Head Dimensions (excl. connectors) | 71 × 33 × 34 mm |
| Laser Head Weight | 6.2 kg |
| MTBF | 20,000 h |
| RoHS 2002/95/EC & CE Compliant | Yes |
| Warranty | 1 Year |
| Pilot Beam | >1 mW @ 625 ±5 nm, 3–5 V, <120 mA |
| Monitor Diode | 5 VDC, 0–2 V output signal |
| Threshold Current (typ.) | 6–10 A |
| Operating Current (BOL) | 53 A (max 60 A) |
| Operating Current (EOL) | 72 A |
| Slope Efficiency | 7.8 W/A |
| Typical Wall-Plug Efficiency | 37% |
| Operating Voltage | <20 V |
| Reverse Voltage Rating | Not specified |
| Brand | Rayscience |
|---|---|
| Model | C00122 |
| Wavelength | 850 nm (typ.) |
| Output Power | 0.1–1.5 mW (CW) |
| Spectral Width | ≤0.85 nm (FWHM) |
| Threshold Current | 3–6 mA |
| Operating Current | 12 mA (typ.) |
| Forward Voltage | 1.9–2.1 V @ 10 mA |
| Rise/Fall Time | ≤150 ps |
| Operating Temperature | −20 to +65 °C |
| Storage Temperature | −40 to +85 °C |
| Package | 4-pin coaxial, 62.5 µm multimode fiber-coupled |
| Pinout | 1=GND, 2=Anode (+), 3=NC, 4=Cathode (−) |
| Forward Current Limit | 20 mA |
| Reverse Voltage Limit | 10 V |
| Brand | Rayscience |
|---|---|
| Model | C00126 |
| Output Power (Nominal) | ≥10 mW to ≥95 mW (depending on tube length) |
| Discharge Tube Length | 400 mm to 2000 mm |
| Transverse Mode | TEM₀₀ |
| Long-Term Power Stability | ≤±1.5 %/hour (after 2 hrs warm-up) |
| Short-Term Power Stability | ≤±2.5 %/hour (within first hour) |
| Warm-up Performance | ≥70 % nominal output at power-on |
| Free Spectral Range (FSR) | 65 MHz to 300 MHz |
| Polarization Ratio | 1000:1 (vertical or horizontal) |
| Beam Diameter | 0.7 mm to 2.0 mm |
| Beam Divergence | ≤0.5 mrad to ≤1.0 mrad |
| Operating Current | 8–15 mA |
| Power Supply Consumption | 50 W to 100 W |
| Dimensions (L×W×H) | 560×115×90 mm to 2185×120×95 mm |
| Weight | 5 kg to 20 kg |
| Lifetime | ≥10,000 hours |
| Mounting Dimensions (A) | 390 mm to 1400 mm |
| Mounting Dimension (B) | 64 mm |
| Mounting Dimension (C) | 64 ±4 mm (adjustable) |
| Power Supply Size | 240×240×90 mm |
| Power Supply Weight | 3 kg |
| Brand | Rayscience |
|---|---|
| Origin | Russia |
| Model | COMET |
| Wavelength Range | 700–1500 nm |
| Dynamic Range | >10¹⁰ |
| Temporal Range | 870 ps |
| Input Pulse Energy (40–50 fs) | 50–100 µJ |
| Minimum Pulse Duration | >20 fs |
| Repetition Rate | <10 kHz |
| Input Polarization | Horizontal Linear |
| Temporal Resolution | 100 fs |
| Interface | USB |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | COPO |
| Pricing | Available Upon Request |
| Core Components | Solid-State Laser Pump Source + MgO:PPLN-Based OPO Cavity + Integrated Control Electronics |
| Brand | Rayscience |
|---|---|
| Origin | USA |
| Model | FR-103XL |
| Type | Nonlinear Crystal-Based Intensity Autocorrelator |
| Wavelength Range | 410–3000 nm |
| Temporal Resolution | ≤1 fs |
| Maximum Scan Range | >185 ps |
| Pulse Width Measurement Range | 5 fs to 90 ps |
| Sensitivity | ≤1 × 10⁻⁷ W² |
| Minimum Repetition Rate | ≥4 Hz |
| Input Beam Diameter Compatibility | Ø1–6 mm |
| Detector Type | Photomultiplier Tube (PMT) or Fast Photodiode (configurable) |
| Compliance | CE, RoHS, ISO 9001-manufactured supply chain |
| Brand | Rayscience |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Grenouille Series (TG-FROG-UV-S, TG-FROG-UV-L, TG-FROG-DUV-S, TG-FROG-DUV-L, 6-30-USB, 6-200-USB, 8-9-USB, 8-20-USB, 8-50-USB, 10-100-USB, 15-40-USB, 15-100-USB, 8-1-pico, 10-1-pico, 15-1-pico) |
| Wavelength Range | 240–1620 nm |
| Pulse Duration Range | 30 fs – 12 ps |
| Delay Resolution | 0.46–30 fs/pixel |
| Temporal Window | 480 fs – 35 ps |
| Spectral Resolution | 0.003–3.0 nm |
| Interface | USB 2.0 |
| Compliance | CE, RoHS, ISO 9001-certified supply chain |
| Brand | Rayscience |
|---|---|
| Model | NLK1E5EAAA |
| Wavelength Range | 1580–1670 nm |
| Output Power | ≥10 mW (CW) |
| Package | 14-Pin Butterfly |
| Fiber Pigtail | SMF-28, FC/PC Connector |
| Operating Mode | Continuous Wave (CW) |
| Spectral Linewidth | <3 MHz (typ.) |
| Side Mode Suppression Ratio (SMSR) | >50 dB |
| Tuning Range | ±1 nm (temperature & current) |
| Compliance | RoHS, CE |
| Brand | Rayscience |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | QCL |
| Price Range | USD 70,000–140,000 (FOB) |
| Core Component | Semiconductor-based THz laser source with integrated Stirling cooler and driver |
| Brand | Rayscience |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | QCL12500nm |
| Pricing | Available Upon Request |
| Wavelength | 12.5 μm |
| Operating Mode | Pulsed |
| Max Operating Temperature | 250 K |
| SMSR | >30 dB (typ.) |
| Spectral Linewidth | <0.001 cm⁻¹ (FWHM) |
| Beam Divergence (Parallel) | 35–45° |
| Beam Divergence (Perpendicular) | 55–65° |
| Emitting Area | 8 × 20 µm |
| Threshold Current (Ith) | 4.0–5.0 A |
| Forward Current (If) | 4.5–5.5 A |
| Optical Output Power (Popt) | 1–3 mW |
| Slope Efficiency (η) | 0.7–1.5 mW/A |
| Temperature Tuning Rate (CT) | 0.4–0.6 nm/K |
| Pulse Width (Δt) | 100–150 ns |
| Repetition Rate (f) | Up to 100 kHz |
| Brand | Rayscience |
|---|---|
| Model | QFLD-1550-100S |
| Emission Wavelength | 1550 nm |
| Output Power | 100 mW (CW) |
| Spectral Linewidth | < 3 nm (typ.) |
| Operating Temperature Range | –40 °C to +50 °C |
| Wavelength Drift Coefficient | 0.5 nm/°C |
| Rise Time | 0.5 ns |
| Fiber Type | SMF-28e+ single-mode fiber pigtail |
| Connector Options | FC/PC or FC/APC (optional) |
| Integrated Components | TEC and thermistor |
| Monitor Photodiode | Not included |
| Brand | Rayscience |
|---|---|
| Origin | Shanghai, China |
| Model | RSHN-250 |
| Wavelength | 632.8 nm |
| Mode | TEM₀₀ (Single-Mode) |
| Output Power | ≥2 mW |
| Beam Diameter (1/e²) | ≤1.3 mm |
| Beam Divergence | ≤1.3 mrad |
| Operating Current | 5 mA |
| Power Stability | <±5% per hour |
| Input Voltage | 220 V AC, 50 Hz |
| Max. Output Voltage | 7 kV |
| Adjustable Beam Height Range | 280–400 mm (customizable) |
| Pitching Angle | ±15° |
| Tube Construction | Double-precision molded bore |
| Power Supply Type | Switch-mode high-voltage DC supply |