Optical Measurement Instruments
Filter
Showing 2551–2580 of 3895 results
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | 205 |
| Output Power | ≥2 mW (250A) |
| Wavelength | 632.8 nm |
| Transverse Mode | TEM₀₀ |
| Beam Diameter (1/e²) | ≤7 mm |
| Beam Divergence (full angle) | ≤1.5 mrad |
| Polarization | Circular |
| Power Stability | ≤±5% per hour |
| Dimensions (Laser Head, A-type) | 270 × 85 × 80 mm |
| Dimensions (Laser Head + PSU, B-type) | 170 × 120 × 45 mm |
| Operating Temperature | 15–35 °C |
| Humidity Resistance | High (hermetically sealed glass envelope) |
| Brand | Melles Griot |
|---|---|
| Origin | USA |
| Model | 25 LHR 213 |
| Wavelength | 632.8 nm |
| Output Power | 0.5 mW |
| Beam Diameter | 0.46 mm |
| Beam Divergence | 1.77 mrad |
| Polarization | Unpolarized |
| Transverse Mode | TEM₀₀ |
| Lifetime | >20,000 hours |
| Warm-up Time | <10 min to frequency lock |
| Frequency Stability | ±1.0 MHz (1 min), ±2.0 MHz (1 hr), ±3.0 MHz (8 hrs) |
| Power Stability | ±0.2% |
| Linewidth | <1.5 GHz |
| Coherence Length | >20 cm |
| Brand | Melles Griot |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 35IMA |
| Laser Type | Gas Laser (Argon-Ion) |
| Output Wavelengths | 457 nm, 488 nm, 514 nm (single-line or multi-line) |
| Output Power Range | 4–65 mW |
| Beam Mode | TEM₀₀ |
| Cooling Method | Forced-Air |
| Form Factor | Endoscopic (compact, fiber-coupling optimized) |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | 204 |
| Price | Upon Request |
| Output Power | 1.0 mW |
| Wavelength | 632.8 nm |
| Beam Diameter | 0.5 mm |
| Beam Divergence | 1.60 mrad |
| Transverse Mode | TEM₀₀ (>90%) |
| Polarization Ratio | 1000:1 |
| Intensity Noise | <0.05% RMS |
| Frequency Stability (1 min / 1 hr / 8 hrs) | ±0.5 / ±2.0 / ±2.0 MHz (frequency-lock mode) |
| Power Stability (1 min / 1 hr / 8 hrs) | 1.0% RMS (frequency-lock) |
| Tuning Range | ±300 MHz |
| Frequency Drift | ±150 MHz (comparative mode), ±50 Hz (beat-down mode) |
| Temperature Coefficient | 0.5 MHz/°C (frequency-lock) |
| Lock Temperature Range | 10–30 °C |
| Coherence Length | >1 km |
| Extinction Ratio | >5000:1 |
| Safety Classification | CDRH Class IIIa, IEC Class 3B |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MENHIR-1550 |
| Key Components | Solid-state femtosecond laser system with integrated fiber-optic and free-space output |
| Center Wavelength | 1560 nm ± 10 nm |
| Repetition Rate | Up to 2.5 GHz (standard: 250/500 MHz, 1/1.25/2/2.5 GHz |
| Pulse Width | < 200 fs, transform-limited |
| Average Output Power | >50 mW (MENHIR-1550), up to 2 W (MENHIR-1550+) |
| Pulse Energy | >0.05 nJ (MENHIR-1550), up to 1 nJ (MENHIR-1550+) |
| Peak Power | >0.1 kW (MENHIR-1550), up to 4 kW (MENHIR-1550+) |
| Spectral Bandwidth | >12.5 nm (3 dB) |
| Amplitude Noise | < 0.1% RMS (24 h) |
| Timing Jitter | < 30 fs (1 kHz – 10 MHz) |
| Beam Quality | TEM₀₀, M² < 1.05 |
| Polarization | Linear, PER > 23 dB (>200:1) |
| Output Interface | Polarization-maintaining fiber (FC/APC) and collimated free-space beam |
| Power Supply | 5 V / 2 A (MENHIR-1550), 24 V / 2 A (MENHIR-1550+) |
| Power Consumption | < 10 W (MENHIR-1550), < 50 W (MENHIR-1550+) |
| Cooling | Active air-cooling |
| Warm-up Time | < 10 s (cold start) |
| Dimensions & Weight | 240 mm × 160 mm × 89 mm, 5 kg |
| Operating Temperature | 5 – 45 °C |
| Analog I/O | Power modulation, alarm, internal lock, trigger, status monitoring |
| Digital Interfaces | USB, RS-232, Ethernet, CAN |
| Brand | Menlo Systems |
|---|---|
| Origin | Germany |
| Model | C-Fiber Series |
| Wavelength | 1560 ± 20 nm (fundamental), 780 ± 10 nm (SHG) |
| Average Power | >100 mW (C-Fiber), >180 mW (C-Fiber-780 HP) |
| Pulse Energy | >1.0 nJ (C-Fiber), >1.8 nJ (C-Fiber-780 HP) |
| Pulse Width | <90 fs (chirped, fundamental), <120 fs (SHG, <80 fs optional) |
| Repetition Rate | 100 MHz (50–250 MHz configurable) |
| Timing Jitter | <2 fs rms |
| Frequency Stability | <1 ppm over 90 h |
| Output | Polarization-Maintaining fiber or free-space beam |
| Technology | Figure-9® mode-locked oscillator with all-PM fiber architecture |
| Brand | Menlo Systems |
|---|---|
| Origin | Germany |
| Model | Orange Series |
| Wavelength | 1040 ± 10 nm |
| Average Power | >100 mW (Orange), >1 W (Orange HP), >10 W (Orange HP 10) |
| Pulse Energy | >1.0 nJ (Orange), >10 nJ (Orange HP), >100 nJ (Orange HP 10) |
| Pulse Duration | <150 fs |
| Repetition Rate | 100 MHz (50–250 MHz optional) |
| Pulse Timing Stability | <1 ppm over 90 h |
| RMS Power Stability | <1 % (over 12 h) |
| Beam Quality | M² < 1.2–1.25 |
| Output | Free-space collimated beam |
| Cooling | Active air cooling |
| Architecture | All-fiber, polarization-maintaining components |
| Technology | Figure-9 mode-locked oscillator with integrated SHG module |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Pricing | Upon Request |
| Measurement Principle | 90° Nephelometric Scattering |
| Light Source | Tungsten Lamp (Turb 550) / Infrared LED (Turb 550 IR) |
| Range | 0.01–1000 NTU, Auto-ranging |
| Resolution | 0.01 NTU (0.00–9.99), 0.1 NTU (10.0–99.9), 1 NTU (100–1000) |
| Accuracy | ±2% of reading or ±0.01 NTU |
| Repeatability | <±1% of reading or ±0.01 NTU |
| Calibration | Auto 1–3-point with user-definable intervals |
| Response Time | 3 s |
| Display | Dual-line LCD with special character support |
| Sample Cell | 28 × 70 mm round glass vial |
| Sample Volume | 25 mL |
| Interface | RS232 serial output |
| Real-time Clock & Calendar | Integrated |
| GLP Compliance | Calibration due-date alert, operator ID logging, measurement timestamping |
| Dimensions (L×W×D) | 250 × 290 × 110 mm |
| Operating Temperature | 10–40 °C |
| Power Supply | 90–250 VAC via external transformer |
| Certifications | CE, UL, cUL, TÜV/GS |
| Standard Kit | Universal power adapter, three blank cuvettes, English operating manual, quick-reference guide |
| Brand | Mesa Photonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Dual-Axis MEMS Micromirror |
| Key Components | Solid-State Laser Systems & Optical Control Modules |
| Mirror Diameter Range | 0.8–4.2 mm (custom up to 9.0 mm) |
| Scan Angle | ±16° (Tip/Tilt, full range 32°) |
| Drive Power | <10 µW (continuous operation) |
| Material | Single-Crystal Silicon |
| Surface Finish | High-Reflectivity Dielectric Coating (application-specific R > 99.5% @ target λ) |
| Control Mode | Analog Voltage-Driven (continuous, static & dynamic positioning) |
| Architecture | Gimbal-Free Monolithic MEMS Design |
| Fabrication Technology | ARI-MEMS Process |
| Brand | Mesa Photonics (Distributed by Auniontech) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MP-HC-34P |
| Optical Path Length | 5.78 m (adjustable via mirror spacing) |
| Dimensions | 30 cm (L) × Ø ~8 cm |
| Weight | 400 g |
| Mirror Coating | Au (R > 99.9% @ 1500–20,000 nm) |
| Input/Output | FC/PC Fiber Port + SMA Photodetector Output |
| Wavelength Range | 750–2600 nm (customizable to 20 µm) |
| Pass Count | 34 (pre-aligned, factory-optimized) |
| Compliance | ISO 9001-certified manufacturing environment |
| Brand | Mesa Photonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Instrument |
| Model | IDOL / IMPACTIDOL Series |
| Core Configuration | Diode-Pumped, Q-Switched, Solid-State Laser System |
| Fundamental Wavelengths | 1342 nm (IDOL), 1064 nm (IMPACTIDOL) |
| Pulse Width | <12 ns (IDOL), <10 ns (IMPACTIDOL) |
| Beam Quality (M²) | <1.2 |
| Repetition Rate | Up to 100 kHz (IDOL), Up to 200 kHz (IMPACTIDOL) |
| Output Modes | TEM₀₀ |
| Frequency Conversion | Second Harmonic Generation (SHG) to red/blue (IDOL), SHG and fourth-harmonic generation (FHG) to green/UV (IMPACTIDOL) |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 (Laser Product Safety) |
| Brand | Mesa Photonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Instrument |
| Model | IMPRESS 213/224 |
| Laser Wavelengths | 213 nm, 224 nm |
| Pulse Width (213 nm) | <7 ns |
| Pulse Width (224 nm) | <9 ns |
| Beam Quality (M²) | <1.6 |
| Control Interface | RS232 |
| Pump Source | Diode-Pumped Solid-State |
| Operating Mode | Computer-Controlled Q-Switched Pulsed Output |
| Brand | Mesa Photonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | IXION-193-SLM (193 nm Single-Frequency Solid-State Laser) |
| Core Architecture | Diode-Pumped, Q-Switched, All-Solid-State Laser System |
| Wavelength Tuning Range | 190–194 nm (0.01 nm resolution) |
| Spectral Bandwidth | Fourier-transform-limited (< 1 MHz typical, near transform limit) |
| Beam Mode | TEM₀₀ |
| Pulse-to-Pulse Energy Stability | < 3% RMS |
| Optional Integrated Spectrometer | Absolute wavelength accuracy ±0.001 nm |
| Form Factor | 19-inch rack-mountable chassis |
| Control Interface | LabVIEW-compatible driver suite |
| Cooling & Power | External or integrated chiller and power supply modules available |
| Compliance | Designed for ISO/IEC 17025-compliant metrology labs |
| Brand | Mesa Photonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PIXIE |
| Pricing | Upon Request |
| Core Configuration | Diode-Pumped Solid-State (DPSS) Laser System with Integrated Passive Mode-Locking Module |
| Wavelength | 1342 nm (fundamental), optional harmonic generation to 671 nm (red) and 447 nm (blue) |
| Pulse Duration | <15 ps (typical) |
| Repetition Rate | 80 MHz (fixed, cavity-determined) |
| Average Power | >1.2 W @ 1342 nm |
| Beam Quality | M² < 1.1 |
| Cooling | Conductive + forced-air hybrid thermal management |
| Operating Environment | 15–30 °C, <70% RH non-condensing |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 (Laser Product Safety) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | MyBrix |
| Product Type | Handheld Refractometer |
| Display | Digital |
| Measurement Range | 0–95 °Brix |
| IP Rating | IP65 |
| Temperature Compensation | Automatic (ATC) |
| Prism Design | Shallow, Easy-Clean Geometry |
| Battery Life | Up to 10,000 measurements |
| Predefined Scales | 10 built-in scales (3 simultaneously active) |
| Weight (with batteries) | 115 g |
| Brand | Metrolux |
|---|---|
| Origin | Germany |
| Model | ML4560 |
| Software Suite | raylux ML1240 (wavefront analysis) + beamlux ML1200 (ISO-compliant beam quality analysis) |
| Camera | ML3743 CCD, 2/3" format, 12-bit dynamic range, 1392 × 1040 pixels |
| Wavelength Range | 350–1100 nm (standard), extendable to 190–350 nm with optional converter |
| Pupil Size | 8.97 × 6.71 mm |
| Max Frame Rate | 15 fps |
| Spatial Resolution | 200 µm |
| Sub-Aperture Array | 45 × 34 |
| Dynamic Range (Tilt) | ±1.6° (730 λ) |
| Wavefront Accuracy | <16 µrad (intrinsic sensor), system-level wavefront accuracy: 10 nm RMS |
| Repeatability | 100 nm RMS |
| Dynamic Range (Focus) | 72 mm (370 λ) |
| Curvature Accuracy | 5 × 10⁻⁴ m⁻¹ |
| System Accuracy (absolute wavefront) | 10 nm RMS |
| M² Measurement Capability | 1–20, accuracy ±3%, single-pulse compatible up to 1 kHz |
| Beam Diameter Range | <6 mm (standard), customizable |
| Spectral Options | 400–700 nm & 700–1100 nm, others on request |
| Energy Density Limit | <5 J/cm² (with optional attenuator) |
| Power Density Limit | <1000 W/cm² (with optional attenuator) |
| Attenuation Range | 1:1 to 1:10⁶, motorized and software-controlled |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | Densito 30PX |
| Product Type | Handheld Density Meter |
| Temperature Control | Yes |
| Digital Display | Yes |
| Measurement Range | 0 to 2 g/cm³ |
| Resolution | 0.0001 g/cm³ |
| Accuracy | ±0.001 g/cm³ |
| Temperature Range | 5–35 °C |
| Temperature Resolution | ±0.1 °C |
| Units Supported | Density, Specific Gravity (SG), Alcohol % v/v, Brix %, API Gravity, Baumé, Plato, H₂SO₄ (w/w%), and User-Defined Units |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Germany |
| Product Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index Range | 1.32–1.58 nD |
| Accuracy | ±0.0001 nD |
| Repeatability | ±5×10⁻⁵ nD |
| Brix Range | 0–100 % w/w |
| Brix Accuracy | ±0.05 % w/w |
| Temperature Control Range | 15–25 °C |
| Minimum Sample Volume | 50.00 mL |
| Max. Method Storage | 6 |
| Display | 4.3″ capacitive color touchscreen |
| Connectivity | 3× USB-A, 1× USB-B |
| Compliance | GB/T 12143-2008 |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | Easy R40/Brix/Bev |
| Instrument Type | Benchtop Refractometer |
| Temperature Control | Peltier-based, active heating & cooling |
| Display | Digital LCD |
| Refractive Index Range | 1.3200–1.5800 nD |
| Built-in Performance Verification | SimpleCheck™ certified reference standards |
| Compliance | Designed for GLP/GMP environments with audit-ready verification workflow |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index Range | 1.30–1.72 |
| Measurement Accuracy | ±0.0001 |
| Resolution | 0.0001 |
| Brix Range | 0–100% w/w |
| Brix Accuracy | ±0.05 (at ~10–80% w/w) |
| Temperature Range | 10–65 °C |
| Temp. Accuracy | ±0.1 °C |
| Supported Units | nD, % Brix, °Oechsle, °Babo, HFCS-42/55, Invert Sugar, Custom Concentration Tables, Freeze Point Depression |
| Preloaded Methods | Up to 66 |
| Auto Sample Detection (FastStart™) | Yes (on Easy Brix & EaSy R4O) |
| Minimum Sample Volume | 0.2 mL (Easy Brix), ~50 µL (EaSy R4O), 0.2 mL (Easy Bev) |
| Dimensions (W×H×D) | 170×156×273 mm (Easy Brix), 198×382×200 mm (EaSy R4O), 170×156×273 mm (Easy Bev) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Instrument Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index (nD) Range | 1.3200–1.7000 |
| Brix Range | 0–100% w/w |
| nD Accuracy | ±0.0001 (near calibration point), ±0.00002–±0.00004 (full range) |
| nD Repeatability | ±0.00005 (R4), ±0.00001 (R5) |
| nD Resolution | 0.0001 (R4), 0.00001 (R5) |
| Brix Accuracy | ±0.05% (R4), ±0.014% (R5) |
| Brix Repeatability | ±0.05% (R4), ±0.01% (R5) |
| Temperature Range | 5–100 °C (R4), 5–75 °C (R5) |
| Temp. Accuracy | ±0.1 °C (5–100 °C, R4), ±0.03 °C (15–50 °C, R5), ±0.05 °C (5–75 °C, R5) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Measurement Range | 0–100 % w/w (Brix or refractive index equivalent) |
| Accuracy | ±0.05 % w/w |
| Compliance | FDA 21 CFR Part 11 ready (with LabX software) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | InPro 8600 |
| Measurement Range | 0–100 EBC / 0–400 FTU |
| Process Connection | Inline sanitary sleeve (Varivent®-compatible) |
| Wetted Materials | 316L stainless steel, sapphire optics |
| Operating Temperature | 0–80 °C (standard), up to 120 °C (short-term) |
| Operating Pressure | 1–16 bar |
| Optical Detection Angles | 25° and 90° scattering |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | Industrial Online Turbidimeter |
| Measurement Principle | Backscatter & Forward/90° Scatter Optical Detection |
| Sensor Types | InPro8200 (Dual-Fiber Backscatter), InPro8300RAMS (Flow-Cell Forward/90° Scatter) |
| Compliance | Designed for FDA 21 CFR Part 11, GMP/GLP environments, ASTM D6506, ISO 7027 |
| Installation Options | Reactor-mounted, Pipe-threaded (DIN/ISO/NPT), Sanitary Clamp (Tri-Clamp®), Flow Cell |
| Output Signal | 4–20 mA, HART®, Modbus RTU/TCP, EtherNet/IP™ |
| Enclosure Rating | IP66/IP68 (InPro8200), IP69K (InPro8300RAMS) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | InPro8200 |
| Measurement Principle | Backscatter Optical Detection |
| Optical Path | Dual-Fiber Configuration |
| Measuring Range | 5–4000 FTU, 0–30 g/L (cell density) |
| Probe Length Options | 120 / 205 / 297 / 407 mm |
| Wetted Materials | ASTM A240 UNS S31603 (316L stainless steel) or UNS N10276 (Hastelloy C-276) |
| Process Connection | Pg 13.5 thread |
| Max. Operating Pressure | 16 bar (232 psi) |
| Window Material | Epoxy-sealed optical window |
| Fiber Optic Cable | Fixed 3 m dual-fiber cable with 2 FC/PC connectors |
| Probe Diameter | 12 mm |
| Compliance | Designed for GMP/GLP environments |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | InPro8400 |
| Measurement Principle | 12° forward scatter + direct transmission |
| Optical Window Material | Sapphire |
| Wetted Materials | Stainless steel (316L), sapphire, FDA-compliant polymer gasket |
| Process Connections | DIN, ANSI, APV, NPT, milk union, Tuchenhagen Varivent, Neumo BioControl, Tri-Clamp |
| Pressure Rating | 1–16 bar (14.5–232 psi) |
| Particle Detection Threshold | ≥ 0.3 µm |
| Calibration Units | FTU, EBC, ppm, g/L |
| CIP-Compatible | Yes |
| Compliance | FDA 21 CFR Part 11 ready (with appropriate software configuration), meets ISO 7027 and ASTM D6506 requirements for turbidity measurement |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Germany |
| Product Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index Range | 1.3200–1.7000 nD |
| Accuracy | ±0.0001 nD |
| Repeatability | ±5×10⁻⁵ nD |
| Brix Range | 0–100 % w/w |
| Brix Accuracy | ±0.05 % w/w |
| Temperature Control Range | 5–100 °C |
| Temp. Control Accuracy | ±0.1 °C |
| Minimum Sample Volume | 0.50 mL |
| Built-in Units | Refractive Index, Brix, pH, Chemical Concentration, Freezing Point, Salinity, and up to 30 user-defined concentration tables |
| Connectivity | USB Host (3 ports), RS232, Ethernet, HDMI, CAN, USB Device |
| Compliance | ASTM D1807, D1218, D1747, D2140, D3321, D4095, D4542, D5006, D524 |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | 30PX / 30GX |
| Measurement Principle | Sodium D-line (589.3 nm) critical angle method |
| Refractive Index Range | 1.32–1.50 (30PX), 1.32–1.65 (30GX) |
| Resolution | 0.0001 RIU |
| Accuracy | ±0.0005 RIU |
| Temperature Range | 10–40 °C |
| Temperature Compensation | Integrated Peltier-controlled sensor with automatic compensation (ATC) |
| Display | High-resolution LCD |
| Data Output | USB and optional Bluetooth connectivity |
| Compliance | Designed for GLP/GMP environments |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | Refracto 30PX |
| Sample Measurement Range | 1.32–1.50 RI |
| Resolution | 0.0001 RI |
| Accuracy | ±0.0005 RI |
| Display | Backlit LCD with digital readout |
| Temperature Compensation | Automatic (reference temp: 20 °C, user-definable) |
| Data Storage Capacity | Up to 1100 measurements with timestamp, sample ID, unit, and compensation settings |
| Interface | Infrared (IR) for data export (requires IR/RS232 converter 51325006) |
| Prism Material | Optical glass with stainless-steel bezel |
| Sample Compatibility | Transparent to dark-colored liquids |
| Unit Conversion | Brix (%), °Bé (Baumé), HFCS, and user-defined concentration scales |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index Range | 1.3200–1.7000 |
| Brix Range | 0.0–100.0 % w/w |
| Refractive Index Accuracy | ±0.0001 |
| Refractive Index Repeatability (nD, n=10) | ±0.00005 |
| Temperature Range | 5–100 °C |
| Temperature Accuracy | ±0.1 °C |
| Compliance | FDA 21 CFR Part 11, ISO/IEC 17025, ASTM D1218, USP <831> |