Optical Measurement Instruments
Filter
Showing 2581–2610 of 3895 results
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MG-III |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | RedEdge-MX |
| Price Range | USD 13,500 – 27,000 (est. FOB) |
| Weight | 231.9 g (incl. DLS 2 & cable) |
| Dimensions | 8.7 cm × 5.9 cm × 4.54 cm |
| Power Input | 4.2–15.8 V DC |
| Typical Power Consumption | 4 W (peak: 8 W) |
| Spectral Bands | Blue (475 nm), Green (560 nm), Red (668 nm), Red Edge (717 nm), Near-Infrared (840 nm) |
| Bandwidth | ±10 nm (FWHM) |
| Spatial Resolution | 8 cm GSD at 120 m AGL |
| Frame Rate | 1 image/sec (full 5-band capture) |
| Shutter | Global shutter |
| FOV | 47.2° (diagonal) |
| Spectral Range | 400–900 nm |
| Trigger Modes | Timed, Overlap, External TTL, Manual |
| Operating Temp | 0–40 °C (still air), 0–50 °C (with airflow >0.5 m/s) |
| Interfaces | UART, 10/100/1000BASE-T Ethernet, Wi-Fi 802.11 b/g/n, GPS, SDHC slot, GPIO trigger |
| Data Output | Radiometrically calibrated raw TIFF (16-bit), geotagged, with embedded DLS 2 metadata |
| Brand | ELAS |
|---|---|
| Model | MicroLAB |
| Core Laser Source | EKSPLA NL200 Ultra-Compact Q-Switched Nd:YAG Laser |
| Wavelengths | 1064 nm (fundamental), 532 nm, 355 nm (harmonic options) |
| Pulse Energy | >0.9 mJ @ 1064 nm |
| Pulse Duration | ≤7 ns |
| Position Synchronization | Integrated PSO (Position Synchronized Output) |
| Motion Control | Physik Instrumente Piezo-Motor-Driven X-Y Stages |
| Control Platform | Dedicated Laptop-Based SCA Software Suite |
| Harmonic Switching | Automatic or Manual Selection of Up to 3 Harmonics |
| Stage Travel | Customizable X-Y Range |
| Application Scope | Micro-ablation, Surface & Bulk Marking, Biomedical Device Prototyping, Thin-Film Patterning, Solar Cell Scribing |
| Brand | Microtech |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | TPO |
| Core Component | Femtosecond-Pumped Optical Parametric Oscillator (OPO) with Quasi-Phase-Matched GaAs Crystal |
| THz Pulse Duration | 6–10 ps |
| Repetition Rate | 110 MHz |
| Average Power | >0.3 mW |
| Peak Power | >400 mW |
| Central Frequencies | 0.85 THz or 1.5 THz |
| Spectral Bandwidth | ≥100 GHz |
| Output Configuration | Collimated, Polarized, Free-Space THz Beam |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PA202 |
| Product Type | Handheld Refractometer |
| Temperature Compensation | Automatic Nonlinear (0–50 °C) |
| Display | Digital LCD |
| Measurement Range | Refractive Index 1.3330–1.5040 nD |
| Brix | 0.0–85.0% |
| Accuracy | ±0.1 Brix |
| Resolution | 0.1 Brix |
| Sample Volume | 0.3 mL |
| Measurement Time | <5 s |
| Prism Material | Sapphire |
| Sample Cell Material | Stainless Steel |
| Power | 2×AAA batteries (5000+ readings) |
| Dimensions | 145×75×37 mm |
| Weight | 250 g |
| Language Support | English, French, Spanish, German, Russian |
| Brand | MISCO |
|---|---|
| Origin | USA |
| Model | VIP2-3A-2.0/2.5 |
| Product Type | Inline Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index Range | 1.3330 to 1.5000 nD₂₀ |
| Brix Range | 0–85 °Brix |
| Resolution | 0.0001 nD₂₀ (0.1 °Brix) |
| Accuracy | ±0.0001 nD₂₀ (±0.1 °Brix) |
| Optical Material | Sapphire |
| Wetted Parts | Passivated 316L Stainless Steel |
| Light Source | Precision LED @ 589.3 nm |
| IP Rating | IP68 |
| Certifications | 3-A Sanitary, CE, FCC |
| Operating Temperature | −20 to 100 °C |
| Pressure Rating | 0–20.68 bar (0–300 psi) |
| Power Supply | 5–24 VDC (3 VDC optional) |
| Dimensions | 61 mm H × 64.1 mm max Ø |
| Weight | 0.45 kg |
| Brand | Mitaka |
|---|---|
| Origin | Japan |
| Model | Micro-Visual Alignment System |
| Camera Sensor Size | 2/3″ |
| Resolution | 2 MP |
| Magnification Range | 0.3×–0.7× |
| Telecentricity | Object-Side Telecentric |
| Illumination | Integrated Coaxial White LED |
| Working Distance | 8 mm (customizable) |
| Alignment Accuracy | 1–10 µm |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Model | PT-200 |
| Form Factor | Benchtop Laboratory Instrument |
| Turbidity Measurement Range | 0–1000 ppm (kaolin), 0–100 ppm (polystyrene) with 10 mm cell |
| Colorimetric Range | 0–10 degrees |
| Resolution | 0.1 NTU |
| Accuracy | ±3% RSD (1–10 ppm, 10 mm cell) |
| Operating Temperature | 0–25 °C |
| Light Source | 12 V / 50 W Halogen Lamp |
| Detector | Silicon Photodiode |
| Integrating Sphere Diameter | Φ80 mm |
| Display | 5.7-inch Full-Color LCD (supporting alphanumeric, kanji, and katakana) |
| Interface | RS-232C, USB |
| Power Supply | AC 100 ±10 V, 50/60 Hz, 118 VA |
| Dimensions | 300(W) × 430(D) × 220(H) mm |
| Weight | ~11 kg |
| Compliance | JIS K 0101, Japanese Waterworks Testing Methods |
| Brand | MKN |
|---|---|
| Model | TES-1327K |
| Measurement Principle | Infrared Pyrometry (6–14 µm spectral response) + Contact Thermocouple (Type K) |
| Temperature Range (IR) | –35 °C to +500 °C (–31 °F to +932 °F) |
| Temperature Range (K-Type) | –150 °C to +1350 °C (–238 °F to +1999 °F) |
| IR Resolution | 0.1 °C / 0.2 °F |
| K-Type Resolution | 0.1 °C / 0.1 °F (≤200 °C), 1 °C / 1 °F (>200 °C) |
| IR Accuracy | ±2% of reading or ±2 °C, whichever is greater |
| K-Type Accuracy | ±(0.2% rdg + 1.0 °C) from –150 to 0 °C |
| Emissivity Adjustment | 0.17–1.00 (user-selectable) |
| Distance-to-Spot Ratio | 12:1 (min. target diameter: 25 mm) |
| Laser Targeting | Class II, ≤1 mW, visible red dot |
| Display | Backlit LCD with dual-parameter real-time readout |
| Data Logging | 50-point internal memory (viewable directly on display) |
| Auto Power-Off | ~15 seconds |
| Battery | 9 V alkaline (IEC 6LR61, 006P) |
| Operating Environment | 0–50 °C, ≤80% RH |
| Storage | –10–60 °C, ≤70% RH |
| Dimensions | 172 × 118 × 46 mm |
| Weight | 220 g |
| Brand | MKN |
|---|---|
| Model | TES-1327K-USB |
| Measurement Range | −35°C to 500°C (−31°F to 932°F) |
| Resolution | 0.1°C / 0.2°F |
| Accuracy | ±2% of reading or ±2°C, whichever is greater |
| Spectral Response | 6–14 µm |
| Distance-to-Spot Ratio | 12:1 (min. target diameter: 25 mm) |
| Emissivity Adjustment | 0.17–1.00 |
| Laser Targeting | Class II, ≤1 mW |
| Memory Capacity | 21,000 continuous readings + 99 manual records |
| Display | Backlit LCD with dual-temperature & dual-unit (°C/°F) capability |
| Alarm Function | Configurable high/low temperature thresholds with audible beep |
| Interface | USB 2.0 for data export and firmware/software interaction |
| Power | 9V alkaline battery (approx. 100 h continuous operation) |
| Operating Environment | 0–50°C, <80% RH |
| Storage | −10–60°C, <70% RH |
| Brand | MKN |
|---|---|
| Model | TES-1335 |
| Sensor Type | Silicon Photodiode with Diffuser & Cosine-Corrected Filter |
| Measurement Range | 0–40,000 lux (0–40,000 fc) |
| Resolution | 0.01 lux / 0.01 fc |
| Accuracy | ±3% rdg ± 0.5% f.s. (±4% rdg ±10 digits above 10,000 lux, calibrated against 2856 K standard lamp) |
| Spectral Response Compliance | CIE Photopic Luminosity Function (f'₁ < 6%) |
| Cosine Error Compensation | Built-in optical diffuser with cosine angular correction |
| Display | 3¾-digit LCD + analog bar graph |
| Sampling Rate | 1.3 Hz (digital), 13.3 Hz (analog) |
| Auto Power-Off | 30 minutes |
| Operating Temp. | 0–40 °C, ≤80% RH |
| Storage Temp. | −10–50 °C, ≤70% RH |
| Power | 6 × AAA (1.5 V), ~400 h continuous use (Zn-Carbon) |
| Detector Cable Length | 150 cm |
| Detector Dimensions | 92 × 60 × 29 mm |
| Meter Dimensions | 150 × 72 × 35 mm |
| Weight | 320 g |
| Standards Compliance | CNS 5119 Class AA, ISO/CIE photometric traceability |
| Brand | MKN |
|---|---|
| Model | TES-1336A |
| Sensor Type | Silicon Photodiode (not Selenium Cell — corrected per technical specification) |
| Measurement Range | 0–20,000 lux / 0–1,858 fc (1 fc = 10.764 lux) |
| Display | 3½-digit LCD |
| Ranges | 20 / 200 / 2000 / 20,000 lux/fc |
| Resolution | 0.01 lux (0.01 fc) |
| Accuracy | ±(3% of reading + 5 digits) |
| Repeatability | ±2% |
| Temperature Coefficient | ±0.1%/°C |
| Sampling Rate | 2.5 readings/sec |
| Overload Indication | "OL" |
| Data Logging Capacity | 255 groups, up to 16,000 records |
| Interface | RS-232 (9600 bps), includes 9-pin to 25-pin adapter |
| Operating Temp./RH | 0–40°C, 10–80% RH |
| Storage Temp./RH | 10–60°C, 10–70% RH |
| Power | 9V alkaline battery (IEC 6F22 / NEDA 1604 / 006P), ~50 h continuous use |
| Detector Cable Length | 150 cm |
| Detector Dimensions | 87.5 × 60 × 29 mm (L×W×H) |
| Meter Dimensions | 146 × 70 × 39 mm (L×W×H) |
| Weight | 300 g |
| Accessories | Instruction manual, carrying case, 9V battery, RS-232 cable, 9-pin/25-pin adapter, calibration rod, software disk |
| Brand | MKN |
|---|---|
| Model | TES-1337 |
| Sensor Type | Silicon Photodiode with CIE Photopic Filter |
| Measurement Range | 0.01–20,000 Lux (0.01–20,000 fc) |
| Resolution | 0.01 Lux (0.01 fc) |
| Accuracy | ±3% rdg ±0.5% f.s. (±4% rdg ±10 digits above 10 klux, calibrated at 2856 K standard lamp) |
| Spectral Match Error (f₁′) | ≤6% |
| Temperature Coefficient | ±0.1% / °C |
| Sampling Rate | 2.5 Hz |
| Display | 3½-digit LCD + analog bar graph |
| Operating Temp./RH | 0–40°C / <80% RH |
| Storage Temp./RH | −10–50°C / <70% RH |
| Power | 6 × AAA (1.5 V) batteries |
| Battery Life | ~400 h (carbon-zinc) |
| Detector Cable Length | 150 cm |
| Detector Dimensions | 92 × 60 × 29 mm |
| Meter Dimensions/Weight | 150 × 72 × 35 mm / 320 g |
| Overload Indication | OL |
| Hold/Max/Min Functions | Yes |
| Compliance | CIE photopic luminosity function (V(λ)) standard |
| Brand | MKN |
|---|---|
| Origin | Zhejiang, China |
| Model | TES-1339R Memory-Enabled Digital Illuminance Meter (RS232) |
| Sensor Type | Silicon Photodiode |
| Display | 4-digit dual LCD |
| Measurement Range | 0.01–999900 Lux (5 auto-ranging scales) |
| Resolution | 0.01 Lux / 0.001 fc |
| Accuracy | ±3% of reading ±5 digits (calibrated against 2856 K standard incandescent source) |
| Temperature coefficient | ±0.1%/°C |
| Sampling rate | ~5 readings/sec |
| Manual memory capacity | 99 data points |
| Auto-logging capacity | 40,000 records |
| Operating environment | 0–50°C, <80% RH |
| Storage environment | −10–60°C, <70% RH |
| Power | 6 × AAA batteries (~100 h life) |
| Sensor cable length | 150 cm |
| Sensor dimensions | 100 × 60 × 29 mm |
| Main unit dimensions | 150 × 72 × 35 mm |
| Weight | ~320 g |
| Compliance | CNS 5119 Class II |
| Interface | RS232 |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | MN60-C |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 004 |
| Pricing | Available Upon Request |
| Wavelength Range | 457.9–514.5 nm |
| Max Total Output Power | 150 mW (multi-line) / 50 mW (single-line @ 488 nm) |
| Beam Mode | TEM₀₀ |
| Beam Diameter (1/e²) | 0.65 mm |
| Beam Divergence | 0.95 mrad |
| Beam Pointing Stability | <30 µrad |
| Output Power Drift (post-warm-up) | <±1% |
| Amplitude Noise | <1% RMS |
| Polarization Ratio | >100:1 |
| Warm-up Time | 5 min |
| Input Voltage/Frequency | 100–265 VAC, 50–60 Hz |
| Power Consumption | <1500 W |
| Dimensions (L×W×H) | 13.0" × 7.6" × 5.1" |
| Weight | 14 lbs (6.4 kg) |
| Wavelength | 457.9 nm (single-line) |
|---|---|
| Output Power | 10 mW (TEM₀₀) |
| Beam Diameter | 0.65 mm |
| Beam Divergence | 0.95 mrad |
| Pointing Stability | <30 µrad |
| Power Drift (after warm-up) | <±1% |
| Intensity Noise | <1% RMS |
| Polarization Ratio | >250:1 |
| Warm-up Time | 5 min |
| Input Voltage/Frequency | 100–265 VAC, 50–60 Hz |
| Power Consumption | <1500 W |
| Weight | 6.4 kg |
| Origin | USA |
| Configuration | Integrated sealed-tube laser head + embedded power supply |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 (Laser Product Safety) |
| Brand | Modulight |
|---|---|
| Origin | Finland |
| Laser Type | Solid-State / Semiconductor |
| Wavelength Range | 400–2000 nm |
| Output Power Range | 0.1 mW – 300 W |
| Packaging Options | TO-Can, C-Mount, CS-Mount |
| Laser Structures | FP, DFB, BA (Broad-Area), IAB (Individually Addressable Bar) |
| Operation Modes | CW and Pulsed |
| Compliance | RoHS, REACH, ISO 9001-certified manufacturing |
| Brand | Modulight (Finland) |
|---|---|
| Origin | Finland |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Laser Type | Solid-State Semiconductor Laser |
| Core Components | Integrated Solid-State Laser Engine with Fiber-Coupled Output |
| Control Interfaces | RS232, RS422, Ethernet |
| Power Input | DC |
| Housing | Anodized Aluminum |
| Compliance | IEC 60601-1, ISO 13485 Certified Manufacturing |
| Cloud Integration | Modulight Cloud (Wi-Fi/Ethernet/Cellular) |
| Beam Delivery | SMA-905 Fiber Connector or Custom Optics |
| Wavelength Range | 266 nm – 2000+ nm |
| Output Power Range | 10 mW – 100 W (wavelength-dependent) |
| Channel Architecture | Independently Addressable Multi-Wavelength Channels |
| Cooling & Drive | Integrated Thermal Management and Precision Current Drivers |
| Software | PC-Based GUI with Real-Time Control, Logging, and Remote Diagnostics |
| Brand | Modulight |
|---|---|
| Origin | Finland |
| Laser Type | Solid-State & Semiconductor Hybrid Platform |
| Wavelength Standard | 689 nm (Configurable 400–2000 nm) |
| Output Power | Up to 3 W (Primary Treatment Laser), 400 mW @ 635 nm (Class 2 Aiming Beam) |
| Beam Delivery | SMA-905 Fiber-Coupled Output |
| Spot Diameter Adjustment | 1–14 mm |
| Irradiance | Up to 600 mW/cm² |
| Beam Homogenization | Integrated Modulight Beam Shaper |
| Control Interface | iPad mini with Clinical GUI |
| Safety Compliance | IEC 60825-1:2014, EN 60601-2-22:2017, FDA 21 CFR Part 1040.10/1040.11 |
| Cloud Integration | Modulight Cloud (AES-256 Encrypted, HIPAA- and GDPR-Compliant Log Storage) |
| Slit Lamp Compatibility | Universal Mounting for All Major Slit Lamps (Haag-Streit, Topcon, Zeiss) |
| Brand | Moglabs |
|---|---|
| Model | BOSA 400 |
| Wavelength Range | 1265–1345 nm, 1525–1565 nm, 1525–1615 nm |
| Optical Resolution | 10 MHz @ 1550 nm / 10 MHz @ 1310 nm |
| Wavelength Accuracy | ±0.5 pm (C/L-band), ±1.0 pm (O-band) |
| Spurious-Free Dynamic Range | >80 dB |
| Input Power Range | –70 to +13 dBm |
| Max Safe Total Input Power | +20 dBm |
| Sensitivity | –70 dBm / 10 MHz |
| Power Accuracy | ±0.5 dB |
| Polarization Capability | Dual orthogonal polarization channels |
| Scan Speed | 20 nm/s |
| Wavelength Calibration | Built-in atomic frequency reference |
| Optional Modules | Option 10 (1 MHz tunable laser), Option 20 (device characterization: IL/RL), Option 30 (polarization-resolved spectroscopy), Option 40 (phase-resolved spectral analysis) |
| Brand | Moglabs |
|---|---|
| Model | CEL Series |
| Type | External-Cavity Diode Laser (ECDL) |
| Wavelength Range | 450–530 nm & 630–1620 nm |
| Output Power | Up to 250 mW (LD-dependent) |
| Linewidth | <100 kHz (typical), down to 20 kHz (configuration-dependent) |
| Tuning Range | >20 GHz mode-hop-free scan (with MOGLabs controller) |
| Beam Diameter (1/e²) | ~0.6 mm × 0.3 mm |
| Polarization | >100:1 vertical linear |
| Modulation Bandwidth | 20 MHz (AC/DC-coupled, 20 ns delay optional) |
| RF Modulation | >2.5 GHz bandwidth via bias-tee |
| Piezo Feedback | High-bandwidth PZT actuation with user-replaceable Cateye module |
| Thermal Control | TEC (±14.5 V / 3.3 A |
| Cooling | Air-cooled standard |
| Compliance | Designed for GLP/GMP-aligned lab environments |
| Brand | Moglabs |
|---|---|
| Model | MENHIR-1550 |
| Wavelength | 1560 ± 10 nm |
| Repetition Rate | Up to 2.5 GHz (standard options: 250/500 MHz, 1/1.25/2/2.5 GHz |
| Pulse Width | ≤200 fs (transform-limited) |
| Average Power | ≥50 mW (up to 2 W with optional variant) |
| Pulse Energy | ≥0.05 nJ (up to 1 nJ) |
| Spectral Bandwidth | ≥12.5 nm (3 dB) |
| Beam Quality | TEM₀₀, M² ≤ 1.05 |
| Polarization | Linear (PER ≥ 23 dB) |
| Amplitude Noise | ≤0.1% RMS (24 h) |
| Timing Jitter | ≤30 fs (1 kHz – 10 MHz) |
| Cooling | Passive air conduction |
| Warm-up Time | ≤10 s (cold start) |
| Dimensions | 240 × 160 × 89 mm |
| Weight | 5 kg |
| Power Supply | DC 5 V / 2 A or DC 24 V / 2 A |
| Max. Power Consumption | ≤10 W (standard), ≤50 W (high-power option) |
| Output | Polarization-maintaining fiber (FC/APC) or free-space collimated beam |
| Brand | auniontech |
|---|---|
| Origin | Australia |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Moku:Pro |
| Price Range | USD $105,000 – $132,000 (approx.) |
| Brand | Galvanic |
|---|---|
| Origin | USA |
| Type | In-line Process Turbidimeter |
| Model | MoniTurb-F |
| Measurement Range | 0–500 NTU |
| Resolution | ±2% of full scale |
| Accuracy | ±0.5% of full scale |
| Operating Ambient Temperature | −10 °C to +60 °C |
| Process Temperature | up to 140 °C |
| Process Pressure | up to 220 psi (15 bar) at ambient temperature |
| Wetted Materials | 316L stainless steel (1.4404) standard, customizable |
| Optical Path Length | pipe-diameter-dependent |
| Cable Length | up to 100 m |
| Enclosure Rating | NEMA 4X / IP66 |
| Hazardous Area Options | Class I, Div. 1 |
| Output Interface | Compatible with Monitek® Messenger transmitter |
| Detection Principle | 12° forward scatter photometry |
| Optional Configurations | MoniTurb-S (90° side scatter), MoniTurb-FS (dual-angle scatter) |
| Calibration Interval | 12 months |
| Color Compensation | Yes |
| Optional Air/Water Jet Cleaning System | Available |
| Process Connections | DIN, ANSI, SMS, NPT, APV, TH, Tri-Clamp |
| Units Supported | NTU, JTU, AU, EBC, ppm, g/L, % concentration |
| Brand | Galvanic |
|---|---|
| Origin | USA |
| Model | Monitek MoniSpec-AD |
| Measurement Principle | Dual-Wavelength Absorption Photometry |
| Housing Material | 1.4571 (316L Stainless Steel) |
| Enclosure Rating | NEMA 4X (IP66) |
| Process Connections | DIN, ANSI, SMS, NPT, APV, TH, Tri-Clover |
| Path Length Options | 10–150 mm (1/2"–6") |
| Max Operating Pressure | 15 bar at ambient temperature |
| Max Operating Temperature | 140 °C |
| Fiber Optic Cable Length | Up to 100 m |
| Spectral Range | 390–850 nm |
| Hazardous Area Certification | Class I Div. 1 |
| Compatible Transmitter | Monitek Messenger |
| Measurement Range | Up to 4 Absorbance Units (AU) |
| Accuracy | ±0.5% of reading |
| Repeatability | ±1% |
| Calibration Interval | 12 months |
| Optional Features | Pneumatic cleaning jet |
| Compliant Standards | APHA/Hazen, ASTM D1209, ASTM D1500, ISO 6271, EBC 201, Lovibond |
| Brand | Galvanic |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Form Factor | Benchtop/Laboratory |
| Measurement Ranges | 0–250 EBC (90° side scatter), 0–80 EBC (12° forward scatter) |
| Resolution | 0.01 EBC (sensitivity), 0.05 NTU (display resolution) |
| Operating Temperature | 0–30 °C |
| Accuracy | <2% of reading |
| Repeatability | <1% (with standardized cuvettes) |
| Power Supply | 230 V AC (115 V AC optional) |
| Power Consumption | 60 VA |
| Dimensions | 450 × 300 × 300 mm |
| Weight | 9 kg |
| Measurement Time | ~17 s |
| Interface | RS-232 |
| Cuvette Rotation | Motorized, 360° continuous |
| Automatic Surface Defect Compensation | Yes |
| Color Compensation Algorithm | Embedded |
| Brand | Galvanic |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Monitek Turbidimeter |
| Configuration | Online Process Turbidimeter |
| Measurement Range | 0–8000 mg/L (as SiO₂) |
| Resolution | 0.1 mg/L |
| Operating Ambient Temperature | −10 °C to +50 °C |
| Accuracy | ±1 % of reading |
| Optical Principle | 12° forward scatter detection |
| Wavelength Range | 390–900 nm |
| Repeatability | ±1 % |
| Process Connection | DN25–DN125 (½″–5″) |
| Max Process Pressure | PN16 / ANSI Class 150 |
| Max Process Temperature | 140 °C |
| Sensor Housing Material | 316L stainless steel (Ti, Mn-Co alloy optional) |
| Window Material | Sapphire or metal-backed glass |
| Gasket Options | FKM (FFKM, EPDM, silicone available) |
| Enclosure Rating | IP65 / NEMA 4X |
| Cleaning | Optional integrated spray nozzle |
| Sterilization | CIP-compatible |
| Hazardous Area Certification | ATEX Zone 1 or Zone 2 |
| Power Supply | 90–260 VAC, 50–60 Hz (24 VAC/DC optional) |
| Power Consumption | ≤50 VA |
| Analog Outputs | Up to 4 × 4–20 mA (isolated) |
| Digital Interface | RS-232C / RS-485 Modbus RTU (optional) |
| Relay Outputs | 4 programmable relays (48 V / 2 A) |
| Digital Inputs | 4 × 5 V (optional) |
| Brand | Galvanic |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Monitek Zinc Ion Online Analyzer |
| Price Range | USD 14,000 – 28,000 |
| Brand | Montfort |
|---|---|
| Origin | Austria |
| Laser Type | Diode-Pumped Solid-State (DPSS) Nd:YAG |
| Wavelength | 1064 nm (fundamental), optional 532 nm SHG |
| Pulse Energy | up to 120 mJ |
| Pulse Width | 6–10 ns (FWHM) |
| Repetition Rate | 1–100 Hz |
| Beam Quality | M² < 3 |
| Operating Voltage | 24 V DC |
| Cooling | Conduction-cooled, no water required |
| Dimensions (L×W×H) | 139 × 132 × 64 mm (M-NANO base unit) |
| Weight | ≤ 4 kg (fully integrated) |
| Lifetime | >1 billion pulses |
| Pulse Delay Range | –1.5 µs to +4 µs (relative to trigger) |
| dual-pulse interval | 0 ms to –300 ms |
| Energy Stability | < 0.9% RMS (over 1 hr) |
| Beam Pointing Stability | < 5 µrad (over 8 hrs) |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |