Other Optical Measurement Instruments
Filter
Showing 271–300 of 663 results
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TCB |
| Aperture Options | 50×50 mm to 500×500 mm |
| Temperature Range (Standard) | −20 °C to +80 °C |
| Extended Ranges | EX (−30 °C to +100 °C), UEX (−35 °C to +130 °C), HT (+180 °C max), LT (−40 °C min) |
| Emissivity | 0.98 ± 0.005 (HE option: 0.99 ± 0.005) |
| Spatial Uniformity | < 0.01 °C or 0.4%· |
| Temperature Stability | ±2 mK |
| Total Uncertainty | 0.03 °C |
| Resolution | 1 mK |
| Warm-up/Cool-down Rates | 0.15–10 °C/s (model-dependent) |
| Stabilization Time | <30 s to <80 s |
| Control Interface | USB 2.0 |
| Power Supply | 115–230 VAC, 50/60 Hz |
| Operating Ambient | +5 °C to +45 °C (non-condensing) |
| Dimensions & Weight | 160×230×180 mm / 7.5 kg (TCB-2D) to 430×630×880 mm / 165 kg (TCB-20D) |
| Compliance | Designed for ISO/IEC 17025-accredited calibration labs |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TFEV |
| Type | Modular Blackbody-Based Calibration and Performance Verification System for Fever-Screening Thermal Cameras |
| Compliance | IEC 60601-2-59 (Ed. 2.0, 2017) |
| Primary Function | Quantitative verification of thermal sensitivity, spatial resolution (MRTD), minimum resolvable temperature difference, target size response, and measurement repeatability of infrared fever-screening systems |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | THP |
| Blackbody Emission Area | 200 mm to 1000 × 1000 mm |
| Spectral Range | 0.03–30 THz (0.01–10 mm) |
| Blackbody Temperature Range | +5 °C to +95 °C |
| Target Plate Dimensions | 250 × 250 mm to 1200 × 1200 mm |
| Target Set | 8-bar MRTD targets, 1 knife-edge MTF target, 1 square uniformity/noise target |
| Bar Widths | 2–50 mm |
| Target Emissivity | >0.95 |
| Image Acquisition Interfaces | Analog Video / CameraLink / GigE |
| Control Interface | USB 2.0 |
| Power Supply | 115–230 VAC, 50/60 Hz |
| Operating Temperature | +5 °C to +45 °C (non-condensing) |
| Storage Temperature | −10 °C to +60 °C |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TM-1000 |
| Thermocouple Types | Type N (Metal-Sheathed), Type S (Ceramic-Sheathed) |
| Temperature Range (Type N) | 100 °C to 1010 °C (short-term up to 1050 °C) |
| Temperature Range (Type S) | 600 °C to 1510 °C (short-term up to 1550 °C) |
| Resolution | 0.01 °C (10 mK) |
| Measurement Uncertainty | ±0.6 °C (≤250 °C, Type N), ±1.2 °C (≤750 °C, Type N), ±1.5 °C (≤1000 °C, Type N) |
| Temperature Units | °C, K, °F |
| Power Supply | 5 V DC via USB |
| Max. Power Consumption | 1 W |
| Connector | USB-B |
| Interface Standard | USB 2.0 |
| Communication Protocol | SCPI-compliant |
| Operating Environment | 10 °C to 40 °C (non-condensing), Storage: −10 °C to 60 °C |
| Controller Dimensions | 110 × 55 × 38 mm |
| Probe Dimensions (N) | Ø3 mm × 400 mm |
| (S) | Ø6 mm × 400 mm |
| Cable Length | 1.5 m |
| Weight | 400 g per set |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TM-6 |
| Temperature Range (TM-6L) | −50 °C to +180 °C |
| Temperature Range (TM-6M) | −50 °C to +550 °C |
| Channel Configuration | Single or Dual Channel |
| Sensor Type | PT-100 (100 Ω DIN Class A RTD) |
| Resolution | 0.001 °C |
| Measurement Uncertainty | ±0.006 °C (0 °C < T < 50 °C) |
| Display Refresh Time | 1–5 s (TM-6L), 5–10 s (TM-6M) |
| Power Supply | 230 V AC, 45–65 Hz, ≤20 W |
| Operating Ambient | +15 °C to +45 °C |
| Dimensions | 100 × 210 × 270 mm |
| Weight | 2 kg |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TRAL |
| Spectral Range | 400 nm – 14,000 nm (UV–VIS–NIR–SWIR–MWIR–LWIR) |
| Radiation Sources | HB Halogen Lamp (VIS–SWIR), BB1200 Micro Blackbody (MWIR–LWIR) |
| Monochromator | MGM250 Multi-Grating |
| Modulation | OM25 Optical Chopper |
| Filter Wheel | RW-EF (Edge Filters), RW-AT (Attenuators) |
| Reference Detectors | Spectrally Matched Set |
| Software-Controlled Automation | Full PC Integration with DICO Digital Oscilloscope & Custom Test Suite |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | TVT |
| Light Source | Adjustable multi-spectral halogen/LED source (2856K & >5000K) |
| Spectral Range | 400–1000 nm (calibrated) |
| Illuminance Range | 30 μlx – 30 klx (DN mode) |
| Optical Configurations | Off-axis reflective collimator (100/150/200 mm aperture), refractive collimators (70 mm max aperture) |
| Target Set | 6-position USAF 1951 (variable contrast), knife-edge, distortion, grayscale targets |
| Software Suite | DAL Control, SUB-V, TAS-V, Movis |
| Supported Interfaces | GigE Vision, Camera Link, LVDS, SDI, HDMI, USB 3.0, FireWire, Analog HD, CVBS, HD-CVI, HD-TVI, AHD, CoaXPress |
| Measurement Capabilities | MTF, MRC, resolution, distortion, FOV, sensitivity, SNR, NEI, FPN, non-uniformity, 1/f noise, 3D noise, NPSD, PVF, responsivity function, linearity, dynamic range, color fidelity, bad pixel mapping |
| Calibration Traceability | NIST-traceable spectral radiance and illuminance standards |
| Compliance | ISO 12233, ISO 15739, ISO 17850, ASTM E2823, MIL-STD-810G (optical test protocols), supports GLP/GMP audit trails per FDA 21 CFR Part 11 requirements |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | UHT-25D-1500 |
| Temperature Range | 200–1500 °C (short-term up to 1550 °C) |
| Aperture Diameter | 25 mm |
| Emissivity | >0.99 (0.2–100+ µm) |
| Temperature Resolution | 0.1 °C (<1000 °C), 1 °C (>1000 °C) |
| Temperature Uncertainty | ±(0.15 °C + 1 °C) |
| Short-term Stability | ±1 °C |
| Long-term Stability | ±2 °C |
| Uniformity at 800 °C | ±1.5 °C |
| Warm-up Time to 1500 °C | <2.5 h |
| Control Interface | RS-232 |
| Power Supply | 230 V AC |
| Dimensions (L×W×H) | 109×39×47 cm |
| Weight | ~67 kg |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | UVIC |
| Price Range | USD 105,000 – 132,000 (FOB Europe) |
| UV Channel Spectral Range | 250–275 nm |
| Visible Channel Spectral Range | 360–730 nm |
| UV Radiance Adjustment Range | 10⁻¹⁸ to 10⁻⁶ W/cm² |
| Visible Luminance Range | 0.1–300 cd/m² (≈0.3–1000 lx) |
| Target Types | Six circular apertures (Ø1.6–34 mm), four triangular targets (5–30 mm), six three-bar resolution charts (bar widths 1–5 mm), USAF 1951 visible chart (1–7.13 lp/mm), black circular reference target |
| UV Target Beam Diameter | 36 mm |
| Visible Target Aperture | 160 × 120 mm |
| System Weight | 12 kg |
| Dimensions (W×D×H) | 390 × 380 × 310 mm |
| Operating Temperature | 5–40 °C |
| Storage Temperature | −5–55 °C |
| Humidity | ≤95% RH (non-condensing) |
| Power Supply | AC 230/110 V ±10%, 50/60 Hz (DC 12 V optional) |
| Interface | RS-232 / USB 2.0 |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | UVIR |
| Spectral Range | 280 nm – 1700 nm |
| Optical Aperture Support | ≤100 mm (upgradable to 200 mm) |
| Light Source | XE150-A (manually adjustable, uncalibrated) or XE150-B (motorized, NIST-traceable radiometric calibration in cd/m² and W/m²) |
| Dynamic Range (Illumination) | >10⁴ (XE150-A), >10⁷ (XE150-B) |
| Collimator | CDT off-axis reflective telescope, f = 1000 mm, effective aperture = 100 mm (upgradable), FOV = 2.7°, resolution ≥100 lp/mrad, spectral coverage 0.28–15 µm |
| Target Wheel | MRW-8 motorized 8-position turret, 54 mm target diameter |
| Standard Targets | Five contrast-level USAF 1951 charts, FOV/distortion chart, knife-edge target |
| Software | TAS-A (UVIR-A), TAS-B (UVIR-B) — supports MTF, MRC, SNR, NEI, FPN, non-uniformity, responsivity, dynamic range, linearity, distortion, and field curvature analysis |
| Compliance | Designed for ISO 12233, ISO 15739, ISO 17850, ASTM E3062, and MIL-STD-150A test workflows |
| Interface Options | Analog video, Camera Link, GigE Vision, LVDS, HD-SDI, HDMI |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | VINIS |
| Light Source | LS-MAH Halogen Lamp (Uncalibrated, Manual Attenuation) |
| Optical Tube | CDT Series Off-Axis Reflective Collimator (Selectable Aperture & Focal Length) |
| Target Mount | Manual Target Holder (TAMAH Ring) |
| Compliance | Not NIST-traceable |
| Operating Temperature | +5°C to +35°C |
| Storage Temperature | −5°C to +55°C |
| Humidity | ≤90% RH (non-condensing) |
| Dimensions | 280 × 260 × 230 mm |
| Weight | 8 kg |
| Spectral Range | 400–2000 nm |
| Luminance Range | 60 mcd/m² to 6 kcd/m² (base configuration) |
| Dynamic Range | ≥10⁵ |
| Emission Profile | Lambertian (≤15° full angle) |
| Color Temperature | 2856 K (400–1100 nm) |
| Calibration Status | Uncalibrated (optional calibration add-ons available) |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | Visible Light Target |
| Target Type | Transmission-type USAF 1951 Resolution Target |
| Pattern | 3-Bar Group |
| Group Numbers | 0–7 (optional 0–8) |
| Spatial Frequency Range | 1–228 lp/mm (optional up to 456 lp/mm) |
| Contrast Ratio | 2% to 100% |
| Substrate | Soda-lime glass (quartz optional) |
| Coating | Chromium |
| Plate Dimensions | 23 × 23 mm |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | VIT |
| Power Supply | 230/110 VAC, 50/60 Hz |
| Max Power Consumption | <800 W |
| Operating Temperature | 10–40 °C |
| Dimensions (L×W×H) | ~163 × 63 × 73 cm |
| Weight | ~91 kg (excluding PC) |
| Modular Architecture | Dual-channel projection (radiometric + imaging), frame grabber suite, thermal/environmental chamber (optional), proprietary test software, optional CON module for bare-die sensor evaluation |
| Supported Sensor Types | Silicon-based VIS-NIR imagers, Black Silicon detectors, InGaAs SWIR focal plane arrays (FPAs) |
| Standardized Testing | EMVA 1288:2014 compliant measurements |
| Radiometric Parameters | Spectral responsivity (16 wavelengths), D*, QE, sensitivity, dynamic range, linearity, NEI, FPN, non-uniformity, SNR, dead/hot pixel count, 3D noise |
| Imaging Metrics | MTF, spatial resolution, minimum resolvable contrast (MRC), crosstalk, blooming, FOV |
| Calibration Traceability | NIST-traceable radiometric sources integrated per channel |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | VSB |
| Aperture Options | 50×50 mm, 100×100 mm, 150×150 mm |
| Emitter Temp. Range | −10 °C to +200 °C (at ambient < −33 °C) |
| Operating Ambient Temp. Range | −173 °C to −33 °C (optional upper limit: −28 °C) |
| Setpoint Resolution | 0.001 °C |
| Emissivity | 0.96 ± 0.01 |
| Temp. Uncertainty | ±0.07 °C or ±0.002 × (T − 25) °C |
| Spatial Uniformity | >97% (central ≥90% of aperture area) |
| Stabilization Time | <15 min (from ±1 K to ±0.1 K tolerance) |
| Heating Rate | >20 °C/min (VSB-2D/VSB-4D), >15 °C/min (VSB-6D) |
| Cooling Rate | >3 °C/min (VSB-2D/VSB-4D), >2 °C/min (VSB-6D) |
| Regulation Stability | ±0.01 °C |
| Interface | RS-485 |
| Max. Control Cable Length | 50 m |
| Power | 115–230 VAC, 50/60 Hz |
| Storage Temp. | −10 °C to +60 °C |
| Dimensions | 10×23×25 cm (VSB-2D), 15×27×35 cm (VSB-6D) |
| Brand | Inframet |
|---|---|
| Origin | Poland |
| Model | WAP1-11L |
| Spectral Range | 8–12 µm |
| FOV | 11° (circular) |
| Collimator Type | Transmissive, aspheric triplet |
| Aperture | 100 mm (66 mm optional for athermalized version) |
| Focal Length | 100 mm |
| Resolution | ≥5 lp/mrad |
| Blackbody Temperature Range | 0–100 °C |
| Temp. Control Resolution | 0.001 °C |
| Target Slider | Motorized TS3 |
| Target Set | Three 11° FOV targets (customizable) |
| Max. DUT Distance | ≤150 mm (recommended <30 mm under full FOV) |
| Operating Temperature | 15–30 °C (10–40 °C optional) |
| Weight | 12 kg |
| Brand | Infrared Associates |
|---|---|
| Origin | USA |
| Detector Type | Mercury Cadmium Telluride (HgCdTe) |
| Spectral Range | 1–25 µm |
| Cooling Options | Liquid Nitrogen (LN₂), Stirling Cryocooler, Thermoelectric (TE), or Uncooled Operation |
| Detector Formats | Single-Element, Quadrant Arrays, Dual-Band (InSb/HgCdTe), and Custom Linear/2D Arrays |
| Compliance | RoHS-compliant packaging |
| Interface | Standard BNC or SMA output |
| Brand | Jenoptik |
|---|---|
| Origin | Germany |
| Model | C-Series (C203, C305, C308, C314, C605, C608, C614, C623, C908, C914, C923) / CS-Series (CS155, CS305, CS308, CS314, CS608, CS614, CS908, CS914) |
| Length Measurement Accuracy | (2.6 + L[mm]/200) µm (C-Series), (3.5 + L[mm]/100) µm (CS-Series) |
| Diameter Measurement Accuracy | (1.0 + D[mm]/200) µm (C-Series), (1.3 + D[mm]/100) µm (CS-Series) |
| Max Measurable Length | 250–900 mm |
| Max Measurable Diameter | 30–230 mm |
| Application Scope | Rotating shaft components requiring GD&T-compliant optical metrology |
| Brand | Jenoptik |
|---|---|
| Origin | Germany |
| Model | W15 |
| Measurement Principle | Contact Stylus Profilometry (ISO 21920-compliant) |
| Max Measuring Length | 17.5 mm |
| Vertical Range/Resolution (T1E stylus) | ±100 µm / 6 nm |
| Traverse Speeds | 0.15, 0.5, 1 mm/s |
| Stylus Connection | USB & Bluetooth® |
| Compliant Standards | ISO 21920-1:2021, ISO 4287:2010, ISO 13565-2/-3, ISO 12085, ISO 4288, DIN EN 10049, JIS B 0601 |
| Evaluated Parameters | Ra, Rq, Rz, Rt, Rsk, Rku, Rk-family (Rpk, Rvk, Rk), Rmr, Rdc, RΔq, RSm, AR, Wte, and >40 additional profile & functional parameters |
| System Accuracy | ±5% (per ISO 21920-3 Annex B calibration protocol) |
| Optional Accessories | LV17 Wireless Drive Box, HS300 Height Stand, MS300 Compact Measurement Station |
| Software Platform | Evovis Mobile Standard (PC-based evaluation with statistical export, GLP/GMP-ready audit trail, CSV/PDF report generation) |
| Brand | Jenoptik |
|---|---|
| Origin | Germany |
| Model | W40 |
| Maximum Measurement Length | 20 mm |
| Measurement Speed | 0.2–2 mm/s |
| Connection Interface | USB-C |
| Vertical Measurement Range/Resolution | ±300 µm / 1 nm |
| Compliance | DIN EN ISO 21920, DIN EN ISO 4287:2010, DIN EN ISO 13565-2 & -3, DIN EN ISO 12085, ISO 4287:1987, DIN 4762, DIN EN ISO 4288, JIS B-0601, DIN EN 10049 / SEP 1941 |
| Accuracy | ±5% |
| Evaluation Parameters | Ra, Rq, Rsk, Rku, Rt, Rz, Rk, Rpk, Rvk, Pk, Ppk, Pvk, Wt, Wa, Wq, and >100 additional profile and amplitude parameters per ISO standards |
| Software Platform | Evovis Mobile Standard |
| Brand | Jenoptik |
|---|---|
| Origin | Germany |
| Model | W800 |
| Type | Contact Stylus-Based Surface Profilometer |
| Measurement Principle | Inductive Stylus Tracing with High-Resolution Position Feedback |
| Drive Mechanism | Motorized Bridge-Type Translation Stage |
| Probe Interface | Magnetic Quick-Change Mount with RFID-Enabled Stylus Recognition |
| Control | Integrated Handheld Control Box with Emergency Stop and Axis Resume Functionality |
| Compliance | Designed for ISO 4287, ISO 4288, ISO 25178-2, and ASME B46.1 Conformance |
| Software Platform | Jenoptik TopMap Suite (Supports GLP/GMP Audit Trail, FDA 21 CFR Part 11–Compliant User Management & Electronic Signatures) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Series | specbos 1211 |
| Price Range | USD 13,500 – 27,000 (FOB Hamburg) |
| Spectral Range | 350–1000 nm (standard), optional 250–1000 nm (UV variant) |
| Spot Diameter | 4 mm (default), down to 0.5 mm with optional focusing lenses |
| Measurement Modes | Radiance, Luminance, Illuminance, Irradiance |
| Interface Options | USB 2.0, Bluetooth 4.2, Ethernet, RS-232 |
| Power Supply | Bus-powered via USB |
| Compliance | CE, RoHS, ISO/IEC 17025 traceable calibration available |
| Brand | AOE Tech |
|---|---|
| Model | JF-H410B |
| Wavelength | 650 nm |
| Output Power | 5 mW |
| Spectral Width | ±5 nm @ 20°C |
| Fiber Compatibility | SM & MM |
| Operating Mode | CW / 2 Hz Modulated |
| Connector Interface | 2.5 mm Universal Ferrule |
| Power Supply | 2 × AAA batteries |
| Continuous Operation Time | 20–30 h |
| Operating Temperature | −10°C to +60°C |
| Storage Temperature | −25°C to +70°C |
| Dimensions | 17.5 × 2.6 × 2.6 cm |
| Weight | 200 g |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Model | JF-H430 |
| Price Range | USD 0–7,200 |
| Brand | JP |
|---|---|
| Country of Origin | Spain |
| Model | WRS-1B |
| Sample Capacity | 1 |
| Display | Alphanumeric LCD |
| Input Interface | Photocell-based optical detection with alphanumeric keypad |
| Measurement Method | Optical transmission photometry (light extinction at solid–liquid phase transition) |
| Data Output | Automatic onset, clear point, and endpoint recording |
| Compliance Context | Designed for GLP-compliant laboratories |
| Price Range | USD 6,800 – 13,600 (FOB Spain) |
| Brand | AMETEK Princeton Applied Research |
|---|---|
| Origin | USA |
| Model | 4200A-SCS |
| DC I-V Range | 10 aA – 1 A, 0.2 µV – 210 V |
| C-V Frequency Range | 1 kHz – 10 MHz, ±30 V DC Bias |
| Pulsed I-V | ±40 V (80 V p-p), ±800 mA, 200 MSa/s, 5 ns Resolution |
| Compliance | ASTM F2679, ISO/IEC 17025, FDA 21 CFR Part 11 (with optional audit trail module) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CEFA-C-BO-HP |
| Operating Wavelength | 1540–1565 nm |
| Output Power Range | 25–42 dBm (316 µW – 15.8 mW) |
| Polarization | Linear (PM fiber, PER > 20 dB) |
| Input Power Range | 5–25 dBm |
| Noise Figure | <7–9.5 dB (depending on configuration) |
| Control Modes | ACC & APC (APC range: 10–100%) |
| Power Stability (1 h) | <1–2% |
| Fiber Types | SMF-28 or Panda PM fiber |
| Input/Output Connectors | FC/APC, SC/APC, E2PS, C1 |
| Power Consumption | 15–200 W |
| Monitoring | Input and Output (output optional) |
| Platform Compatibility | B202, M101, M301, M403, B301 |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CEFA-C-PB-HP |
| Saturation Output Power | up to +42 dBm |
| Noise Figure | Low |
| Input Power Range | Low-level (with integrated pre-amplifier) |
| Polarization-Maintaining Output | Optional |
| Linewidth | <100 kHz |
| Control Interface | Standalone module or system-level controller |
| Form Factor | Compact OEM module |
| Power Consumption | Low |
| Reliability | High |
| Operating Wavelength Band | C-band (1527–1566 nm) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | CTFA |
| Output Power | Up to +40 dBm (10 W) |
| Operating Wavelength Range | 1930–2050 nm |
| Gain Bandwidth | 1900–2050 nm |
| Polarization-Maintaining Option | Available |
| Beam Quality | Diffraction-Limited (M² < 1.1) |
| Input OSNR Enhancement | Built-in Pre-Amplifier Stage |
| Eye-Safety Compliance | EN 60825-1:2014 Class 1M / IEC 60825-1:2014 Class 1M |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CVFL |
| Type | Continuous-Wave (CW) Visible-Fiber Laser |
| Wavelength Options | 520–780 nm (model-dependent) |
| Output Power | Up to 3 W |
| Beam Quality | M² < 1.1 (diffraction-limited) |
| Polarization | Linear |
| Spectral Purity | High SMSR |
| Linewidth | 20 GHz (GIGA variants) |
| Frequency Tunability & Modulation | Available (KILO/MEGA variants) |
| Noise Performance | Ultra-low phase noise and RIN |
| Operation Mode | Turnkey, single-frequency (KILO), or multi-longitudinal-mode (GIGA) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CYFL-TERA |
| Output Power | Up to 20 W |
| Operating Wavelength | 1060–1090 nm (selectable) |
| Spectral Linewidth | Few nanometers |
| Polarization | Free or linear |
| Compliance | CE, RoHS, IEC 60825-1 (Class 4 Laser Product) |