Physical Property Testing Instruments
Filter
Showing 6811–6840 of 12100 results
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Manufacturer |
| Instrument Type | Transient Plane Source (TPS) Method |
| Sample Throughput | Single sample per test |
| Test Environment | Ambient temperature (RT–130 °C) |
| Thermal Conductivity Range | 0.0001–300 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ≤3% |
| Sample Forms | Solids (bulk, film, coating), powders, liquids, pastes, gels, metals, and thin films |
| Probe Options | 7.5 mm, 15 mm, and 50 mm diameter (standard and customizable) |
| Measurement Time | 5–160 s (user-configurable) |
| Power Supply | AC 220 V, <500 W |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DZDR-S |
| Instrument Type | Transient Plane Source (TPS) Method |
| Sample Throughput | Single sample per test |
| Test Environment | Ambient temperature (standard) |
| Thermal Conductivity Range | 0.0001–300 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ≤3% |
| Sample Forms | Solids (bulk, granular, coated, thin-film), powders, liquids, pastes, gels, and metallic specimens |
| Probe Options | 7.5 mm (No. 1), 15 mm (No. 2), 50 mm (No. 3, optional/customizable) |
| Minimum Sample Dimensions | ≥15×15×3.75 mm (No. 1), ≥30×30×7.5 mm (No. 2), ≥50×50×7.5 mm (No. 3) |
| Test Duration | 5–160 s (user-configurable) |
| Power Supply | AC 220 V, <500 W |
| Onboard Controller | ARM-based microprocessor |
| Data Acquisition | High-resolution integrated ADC chip |
| Probe Design | Dual-helix sensor geometry with proprietary thermal response modeling |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Transient Plane Source Method |
| Thermal Conductivity Range | 0.0001–300 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ≤3% |
| Measurement Time | 5–160 s |
| Sample Forms | Solid blocks, pastes, granules, gels, liquids, powders, coatings, thin films |
| Probe Diameters | 7.5 mm, 15 mm, 50 mm (optional) |
| Sample Dimensions (min.) | 15×15×3.75 mm (for 7.5 mm probe), 30×30×7.5 mm (for 15 mm probe), 50×50×7.5 mm (for 50 mm probe) |
| Operating Temperature | Ambient to 130 °C |
| Power Supply | AC 220 V, <500 W |
| Dimensions (L×W×H) | 440×390×220 mm |
| Compliance | Designed for ISO 22007-2, ASTM D5470, and GB/T 32064–2015 conformance |
| Software | Embedded ARM-based control system with real-time data acquisition, GLP-compliant audit trail, and exportable CSV/Excel reports |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Domestic |
| Model | DZDR-S |
| Price Range | USD 5,600–9,800 (based on configuration) |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Sample Throughput | Single sample per test |
| Test Environment | Ambient temperature (20–30 °C) |
| Thermal Conductivity Range | 0.0001–300 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ≤3% |
| Sample Forms | Solids, liquids, powders, pastes, gels, metals, coatings, thin films, and thermal insulation materials |
| Probe Options | 7.5 mm (No. 1), 15 mm (No. 2), 50 mm (No. 3, optional/customizable) |
| Sample Dimensions (min.) | 15×15×3.75 mm (for No. 1 probe), 30×30×7.5 mm (for No. 2), 50×50×7.5 mm (for No. 3) |
| Measurement Duration | 5–160 s (user-configurable) |
| Operating Temperature Range | 20–130 °C |
| Power Supply | AC 220 V, <500 W |
| Data Acquisition | High-resolution integrated ADC chip |
| Interface | Color TFT LCD touchscreen |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Transient Plane Source (TPS) Method |
| Sample Throughput | Single sample per test |
| Test Environment | Ambient temperature (20–30 °C) |
| Thermal Conductivity Range | 0.0001–300 W/(m·K) |
| Accuracy | ±3% |
| Sample Forms | Liquids, powders, solids, pastes, metals, gels, coatings, thin films, and insulating materials |
| Probe Options | 7.5 mm, 15 mm, and 50 mm diameter dual-spiral probes |
| Measurement Time | 5–160 s (user-configurable) |
| Repeatability | ≤3% |
| Operating Temperature Range | 20–130 °C |
| Power Supply | AC 220 V, <500 W |
| Sample Dimensions (min.) | 15×15×3.75 mm (for 7.5 mm probe), 30×30×7.5 mm (for 15 mm probe), 50×50×7.5 mm (for 50 mm probe) |
| Optional Accessories | Liquid test cell, powder test capsule, custom probe fixtures |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DZDR-S |
| Instrument Principle | Transient Plane Source (TPS) Method |
| Sample Throughput | Single sample per test |
| Test Environment | Ambient pressure |
| Thermal Conductivity Range | 0.001–300 W/(m·K) |
| Accuracy | ±3% |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | STA 200 |
| Temperature Range | Ambient to 1200°C |
| Heating Rate | 0.1–100°C/min |
| Max Sample Mass | 5 g |
| Atmosphere Options | Inert, Oxidizing, Reducing |
| TG Resolution | 0.1 µg |
| DSC Resolution | 0.1 µW |
| DSC Accuracy | ±0.01 mW |
| Temperature Accuracy | ±0.1°C |
| Temperature Resolution | 0.01°C |
| Cooling Time (1000°C → 100°C) | ≤15 min |
| Data Interface | USB |
| Display | 7-inch 24-bit LCD Touchscreen |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | STA200 |
| Price Range | USD 11,200–14,000 (FOB) |
| Temperature Range | Ambient to 1200 °C |
| Heating Rate | 0.1–100 °C/min |
| Max Sample Mass | 5 g |
| Atmosphere Control | Inert, Oxidizing, Reducing |
| Temperature Resolution | 0.01 °C |
| Temperature Stability | ±0.1 °C |
| TG Sensitivity | 0.01 mg |
| TG Resolution | 0.1 µg |
| DSC Range | ±1000 mW |
| DSC Resolution | 0.1 µW |
| DSC Accuracy | 0.01 mW |
| Cooling Time (1000 °C → 100 °C) | ≤15 min |
| Gas Control | Dual-channel mass flow control with integrated digital flow meters |
| Data Interface | USB 2.0 |
| Display | 7-inch 24-bit color touchscreen LCD |
| Calibration | Multi-point temperature and enthalpy calibration per ISO 11357 & ASTM E1269 |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TGA 101 |
| Sample Capacity | Single-sample |
| Instrument Type | Dedicated TGA System |
| Temperature Range | Ambient to 1550 °C |
| Heating/Cooling Rate | 0.1–100 K/min |
| Maximum Sample Mass | 30 g |
| Temperature Resolution | 0.01 °C |
| Temperature Stability | ±0.1 °C |
| Balance Range | 0.1 mg–2 g (extendable to 30 g) |
| Mass Sensitivity | 0.01 mg |
| Cooling Time | ≤15 min (from 1000 °C to 100 °C) |
| Data Interface | Standard USB 2.0 |
| Power Supply | AC 220 V, 50 Hz |
| Brand | Nanjing Dazhan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TGA 101 |
| Operating Environment | Ambient Pressure |
| Sample Capacity | Single Sample |
| Instrument Type | General-Purpose |
| Temperature Range | Room Temperature to 1200 °C |
| Heating/Cooling Rate | 0.1–100 °C/min |
| Maximum Sample Mass | 30 g |
| Temperature Resolution | 0.01 °C |
| Temperature Stability | ±0.1 °C |
| Cooling Time (1000 °C → 100 °C) | ≤15 min |
| Balance Range | 0.01 mg–2 g (expandable to 30 g) |
| Balance Sensitivity | 0.01 mg |
| Minimum Detection Limit | 0.1 µg |
| Isothermal Hold Duration | 0–500 min (extendable to 72 h) |
| Atmosphere Control | Dual-gas inlet with integrated mass flow meters |
| Display | 7-inch Chinese-language LCD |
| Data Interface | Standard USB |
| Software | Proprietary TGA analysis suite with TG/DTG curve processing, Excel export, PDF report generation, temperature multi-point calibration, and free version upgrades |
| Power Supply | AC 220 V, 50 Hz (customizable) |
| Brand | TA Instruments |
|---|---|
| Origin | USA |
| Model | Nano ITC |
| Temperature Range | 2–80 °C |
| Cell Volume Options | 1.0 mL (standard) or 0.19 mL (low-volume) |
| Thermal Control | Solid-state Peltier heating/cooling |
| Injection System | Removable syringe with high-precision stepper motor drive |
| Software | ITCRun and NanoAnalyze™ |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NMI CRYOSTAT: CRYOGENFREE ULTRA LOW-VIBRATION CRYOS |
| Maximum Magnetic Field | 14.0 T |
| Temperature Range | 1.3 K to 300 K |
| Sample Diameter | Up to 49 mm |
| VTI Configuration | Top-Loading Variable-Temperature Insert |
| DSV Homogeneity | ≤0.1% over 1 cm |
| Brand | NanOsc AB |
|---|---|
| Origin | Sweden |
| Model | PhaseFMR / CryoFMR Series |
| Frequency Range | 2–40 GHz |
| Temperature Range | Room Temperature to 4 K |
| Magnetic Field Range | ±0.7 T to ±16 T (platform-dependent) |
| Frequency Accuracy | ±0.05 GHz |
| SNR | >10 for 10 nm Ni₈₀Fe₂₀ at 40 GHz |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | China (Manufactured in Nantong) |
| Supplier Type | Authorized Distributor |
| Import Status | Domestic Production (Not Imported) |
| Price | USD 14,000–18,000 (FOB Nantong) |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | H-12 |
| Weight | 8 g |
| Overall Length | 80 mm |
| Heating Rod Diameter | 7 mm |
| Heating Rod Length | 65 mm |
| Material | High-grade stainless steel and heat-resistant polymer |
| Mounting Type | Standard 3-axis micromanipulator compatible (e.g., MO-10, MN-151) |
| Operating Temperature Range | Ambient to 120 °C (with optional external controller) |
| Compliance | CE-marked for laboratory use |
| Brand | Narishige |
|---|---|
| Model | HD-21 |
| Origin | Japan |
| Type | Dual-Pipette Manipulation Handle |
| Dimensions | 127 mm (W) × 38 mm (D) × 52 mm (H) |
| Weight | 105 g |
| Accessories | Universal Wrench |
| Category | Physical Property Testing Instruments — Other Manipulation & Handling Accessories |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UST-3A |
| Dimensions | 70 × 42 × 35 mm (W × D × H) |
| Weight | 55 g |
| Compatibility | Designed for UST-3 universal joint base and EMM2/NMN-21 micromanipulator electrodes |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | -70 °C to +150 °C (configurable in 4 grades) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ~4.0 °C/min |
| Refrigerant | R404A/R23 (ozone-friendly) |
| Construction Material | SUS#304 stainless steel (inner & outer chamber) |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Port | One Ø50 mm test port (left side) |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | SBD |
| Price | USD 1,450 (FOB Tianjin) |
| Brand | NCS (China Iron & Steel Research Institute Group) |
|---|---|
| Model | NC-C-SCAN Long-Product Series |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Compliance | GB/T 4730, GB/T 5777, GB/T 18248 |
| Detection Modes | Simultaneous axial & circumferential flaw detection, lamination assessment, and wall thickness measurement |
| Positioning | Dual-axis (axial + circumferential) encoder-based positioning |
| Data Output | C-scan image mapping with embedded A-scan waveform storage |
| Real-time monitoring | Live A-scan waveform display during scanning |
| Application Scope | Cylindrical and elongated components including seamless high-pressure gas cylinders (CNG, LPG), welded pressure vessels, forgings, castings, carbon fiber composites, honeycomb structures, bars, tubes, billets, and irregular-shaped industrial parts |
| Brand | NCS (China Steel Research Institute) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | NC-CUT Series |
| Pricing | Upon Request |
| Brand | NCS (China Steel Research Institute) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Origin | Domestic (China) |
| Model | NC-DUT Series |
| Pricing | Available Upon Request |
| Brand | NCS (China Iron & Steel Research Institute Group) |
|---|---|
| Model | NC-GET Large-Tube Series |
| Origin | Beijing, China |
| Manufacturer | Yes |
| Detection Method | Automated Ultrasonic + Eddy Current Testing |
| Compliance | API RP 5L, ASTM A578/A578M, ASTM A53/A500, ASME BPVC Section V, JIS G3444, GB/T 3091, GB/T 5777, YB/T 4082–4083, Q/SY GJX101, DEP 31.40.20.37 |
| Brand | NCS (China Iron and Steel Research Institute Group) |
|---|---|
| Model | NC-GET Series |
| Origin | Beijing, China |
| Manufacturer | NCS |
| Country of Origin | China |
| Pricing | Available Upon Request |
| Brand | NCS (China Iron and Steel Research Institute Group) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | NC-GUFT Series |
| Pricing | Available Upon Request |
| Brand | NCS (China Iron & Steel Research Institute Group) |
|---|---|
| Origin | Beijing, China |
| Manufacturer | NCS |
| Country of Origin | China |
| Model | NC-HUT Series |
| Pricing | Available Upon Request |
| Brand | NCS (China Steel Research Academy) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | NC-PUT Billet Series |
| Pricing | Available Upon Request |
| Brand | NCS (China Iron and Steel Research Institute Group) |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | NC-PUT Series |
| Pricing | Upon Request |
| Brand | NCS (China Iron and Steel Research Institute Group) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | NC-RGET Series |
| Pricing | Available Upon Request |
| Inspection Mode | Automated Inspection |
| Brand | NCS |
|---|---|
| Origin | Beijing, China |
| Manufacturer | NCS (Steel Research Institute) |
| Type | Pendulum Impact Testing Machine |
| Model | NCS DFAI |
| Imaging Sensor | 3-Megapixel CCD |
| Measurement Accuracy | ±0.02 mm |
| Compliance | Designed for ASTM E436, ASTM E23, ISO 148-1, ISO 83, GB/T 229, GB/T 8363 |
| Software | Proprietary fracture morphology analysis suite with audit trail and data export (CSV, TIFF, PDF) |