- All
- Favorite
- Popular
- Most rated
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Q-SUN® Xe-8 |
| Price | Upon Request |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | QUV |
| Irradiance Range | 0.48–0.95 W/m² @ 340 nm |
| Test Duration | 1–9999 hours (programmable) |
| UV Wavelength Range | 250–400 nm |
| Chamber Capacity | Up to 48 specimens (75 mm × 150 mm each) |
| Brand | Kurabo |
|---|---|
| Origin | Japan |
| Model | RX410 |
| Measurement Principle | Multi-Wavelength Infrared Absorption Spectroscopy |
| Detection Capability | Simultaneous Non-Contact Measurement of Base Film Thickness and Heat-Resistant Coating Thickness (or Areal Mass) |
| Optical Configuration | Rotating Filter Wheel (6-position, 3 active wavelengths standard) |
| Spot Size | 20 × 30 mm (elliptical) |
| Standoff Distance | 20 mm (sensor-to-sample), 40 mm (inter-sensor gap) |
| Response Time | ≤50 ms |
| Output Options | 0–10 V analog or 4–20 mA current loop |
| Operating Temperature | 5–40 °C (non-condensing, ambient ≤35 °C without forced air cooling) |
| Power Supply | AC 100 V ±10%, 50/60 Hz, 200 VA per unit |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Distributor Status | Authorized Distributor |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Form Factor | Benchtop |
| Optical Geometry | d/8° integrating sphere |
| Light Source | LED |
| Spectral Range | 400–700 nm, 360–780 nm, or 350–1050 nm (model-dependent) |
| Repeatability | ΔE*₀₀ ≤ 0.03 (average, CIE L*a*b* color space) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | UltraScan PRO |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | d/8° Integrating Sphere |
| Light Source | Pulsed Xenon Lamp |
| Spectral Range | 350–1050 nm |
| Wavelength Interval | 2 nm (acquisition), 5 nm (reporting) |
| Repeatability | ≤0.03 ΔE*ab (CIE Lab, 20 measurements on standard white tile) |
| Reflectance/Absorbance Measurement Modes | Specular Component Included/Excluded (SCI/SCE) Auto-Switchable |
| Aperture Sizes | 19 mm (1.00″), 9 mm (0.50″), 4 mm (0.25″) |
| Transmission Path Length | 80 mm |
| Integrating Sphere Diameter | 152 mm |
| Sphere Coating | Spectraflect™ |
| Mirror & Port Coating | Duraflect™ |
| Compliance | ASTM D2244, ASTM E308, ISO 7724, ISO 11664, CIE No. 15, AATCC Evaluation Procedure 1, USP <1061>, FDA 21 CFR Part 11 (with optional software configuration) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | VST |
| Instrument Type | Benchtop |
| Light Source | LED |
| Spectral Range | 400–700 nm |
| Repeatability | 0.02 ΔE* (CIE Lab) |
| Connectivity | Micro-USB, Ethernet |
| Sample Access | Removable front door |
| Display | 7-inch capacitive touchscreen |
| Compliance | Supports ASTM D1003, ISO 14782, ISO 6222, USP <631>, EP 2.2.17, JP 2.05 |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | AGR-Agera |
| Product Type | Benchtop Spectrophotometer |
| Optical Geometry | 0°/45° Annular Illumination (15-point fiber-optic averaging) |
| Light Source | Full-spectrum LED (360–700 nm) with UV control |
| Spectral Range | 360–700 nm |
| Repeatability | ΔE2000 < 0.03 (CIEL*a*b*, max) |
| Compliance | ASTM D1925, ASTM E313, ASTM D6290 (45–52 mm aperture), ASTM D2457, ASTM D523, ISO 2813, HG/T 3862-2006, ASTM E308 |
| Display | 7″ 1280×800 capacitive industrial touchscreen |
| Data Interfaces | USB, Ethernet, Wi-Fi, Bluetooth, Email export |
| Software | Embedded EasyMatch Essentials QC (FDA 21 CFR Part 11 electronic signature optional) |
| Aperture Options | XL (51 mm), L (25.4 mm), M (16.9 mm), Custom 30 mm |
| Calibration Standards | NIST-traceable white tile, certified green tile, ASTM/ISO-traceable black glass gloss standard |
| Optical Design | Sealed dual-beam spectrophotometer with 256-element diode array and holographic concave grating |
| UV Mode | Toggleable UV-included / UV-excluded reporting |
| Maintenance | Fanless, filterless, robust industrial enclosure |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | ColorFlex EZ Tomato |
| Product Type | Benchtop Spectrophotometric Colorimeter |
| Optical Geometry | 45°/0° |
| Light Source | Pulsed Xenon Lamp |
| Spectral Range | 400–700 nm |
| Repeatability | < 0.04 ΔE* (20 measurements, average) |
| Aperture Size / Measurement Area | 31.8 mm (1.25″) / 25.4 mm (1.00″) |
| Lamp Lifetime | > 500,000 flashes |
| Inter-instrument Agreement | ≤ 0.15 ΔE* (CIE L*a*b*, average) |
| Illuminants | A, C, D65, TL84, F |
| Observers | 2° and 10° standard observer |
| Color Spaces | CIE XYZ, Yxy, L*a*b*, L*C*h°, Hunter Lab |
| Color Indices | ΔE*, ΔE, ΔEcmc, Whiteness, Yellowness, Metamerism Index, Brightness at 457 nm |
| Tomato-Specific Indices | a/b Ratio, Tomato Chroma Grade, Tomato Juice Grade, Tomato Puree Grade, Tomato Ketchup Grade, Tomato Sauce Grade |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-3 Series |
| Cooling Method | Air-cooled |
| Lamp Configuration | Three independent xenon arc lamps |
| Filter Options | Daylight, Window Glass, Extended UV |
| Irradiance Control | SOLAR EYE® broadband or narrowband (340 nm, 420 nm, TUV) |
| Black Panel Temperature Range | 42–120 °C |
| Chamber Air Temperature Range | 25–45 °C (dark cycle), 35–65 °C (light cycle) |
| Relative Humidity Control | Standard, 10–95% RH |
| Sample Tray Dimensions | 451 mm × 718 mm |
| Spray Options | Front spray, back spray, dual-fluid spray (e.g., acid rain, detergent solution) |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 11341, IEC 60068-2-9 |
| Calibration Traceability | NIST-traceable, ISO/IEC 17025 accredited (A2LA Cert. #2382-01, #2383-02, #2383-03) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | SpectraTrend HT |
| Product Type | Color Difference Meter |
| Instrument Type | Online |
| Optical Geometry | 0°/45° Integrating Sphere |
| Light Source | LED |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE* ≤ 0.03 (mean, measured 20× on standard white tile) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | ColorFlex-EZ-Coffee |
| Optical Geometry | 45°/0° |
| Measurement Principle | Reflectance Spectrophotometry (Visible Spectrum, 400–700 nm) |
| Compliant Standards | ASTM D2244, ISO 11664-4, CIE No. 15:2018 |
| Preloaded Color Scales | HCCI (HunterLab Coffee Color Index), SCAA Roast Scale (0–100), SCAA Number Scale (0–100), CIE L*a*b*, Hunter L,a,b |
| Sample Types | Ground roasted coffee, freeze-dried coffee granules, instant coffee powders, and other reflective solids/powders |
| Data Output | Spectral reflectance (31 data points), tristimulus values, color differences (ΔE*ab, ΔE00), batch consistency metrics |
| Software Compatibility | EasyMatch QC (Windows), supports FDA 21 CFR Part 11 audit trail (with optional user permissions module) |
| Calibration | Integrated white tile + PQ Coffee Calibration Standard |
| Portability | Optional IP65-rated custom carry case with integrated accessories |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | Agera |
| Product Type | Spectrophotometer |
| Instrument Type | Benchtop |
| Light Source | Full-Spectrum LED |
| Spectral Range | 360–700 nm |
| Repeatability | ΔE₀₀ < 0.03 (CIE L*a*b*, maximum) |
| Optical Geometry | 0°/45° annular illumination with 15-point fiber-optic averaging |
| Gloss Measurement | Integrated 60° glossmeter compliant with ASTM D2457, ASTM D523, and ISO 2813 |
| Image Capture | Built-in 5 MP camera at 45° angle under full-spectrum LED illumination |
| Display | 7-inch 1280×800 industrial capacitive touchscreen |
| Software | Embedded EasyMatch Essentials QC software with optional FDA 21 CFR Part 11 electronic signature capability |
| Calibration Standards | NIST-traceable white tile, certified green tile, and ASTM/ISO-traceable black glass gloss standard |
| Measurement Apertures | XL (51 mm), L (25.4 mm), M (16.9 mm), and optional 30 mm custom aperture |
| UV Control | Adjustable UV component with factory calibration and user-defined fluorescent standard alignment |
| Spectral Resolution | 256-element diode array with high-resolution concave holographic grating |
| Optical Architecture | Sealed dual-beam spectrophotometric design |
| Environmental Robustness | Fanless, filterless, sealed optical path for low maintenance and high long-term stability |
| Brand | VeriVide |
|---|---|
| Origin | United Kingdom |
| Model | Digieye |
| Product Type | Spectrophotometric Imaging Color Measurement System |
| Instrument Form Factor | Benchtop |
| Optical Geometry | 0°/45° and d/8° dual-mode compliant |
| Illuminant | Standard D65 (integrated in light booth) |
| Spectral Range | 380–730 nm (visible spectrum) |
| Repeatability | ΔE₀₀ < 0.1 (within-subject, same conditions) |
| Camera Resolution | 17 MP DSLR |
| Light Booth Dimensions | 700 W × 800 D × 860 H mm |
| Max Sample Size | 300 W × 210 D × 80 H mm |
| Display Characterization Accuracy | ΔE₀₀ < 1.2 (after calibration) |
| Camera Characterization Accuracy | ΔE₀₀ < 1.2 (image-to-CIE conversion) |
| Booth Imaging Accuracy | ΔE₀₀ < 1.0 (under controlled illumination) |
| UV Excitation Source | Optional LED-based UV control module |
| Calibration Standards | >150-tile verification chart + neutral gray sample holder (Munsell N5) + diffuse white tile |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | Vista |
| Instrument Type | Benchtop Spectrophotometer |
| Optical Architecture | Dual-Beam, Tt/0° or Td/0° |
| Light Source | Full-Spectrum LED |
| Spectral Range | 400–700 nm |
| Spectral Resolution | <3 nm |
| Effective Bandwidth | 10 nm |
| Photometric Range | 0–150% |
| Repeatability | <0.025 ΔE* (30 measurements) |
| Measurement Time | <2.5 s (color), <5 s (haze) |
| Path Length | 100 mm |
| Illuminant/Observer | D65/10°, C/2° |
| Display | 1280×800 Touchscreen |
| Power Supply | 100–240 VAC, 47–63 Hz, 60 W |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | Q-SUN Xe-1 |
| Xenon Lamp Power | Not specified (air-cooled single-lamp system) |
| Irradiance Control | SOLAR EYE broadband or narrowband (340 nm, 420 nm, or TUV) |
| Light Cycle | Programmable irradiance-on/off cycles with optional water spray and refrigeration |
| Dimensions (W×D×H) | 610 × 584 × 533 mm |
| Sample Tray | 251 × 457 mm (horizontal, flat), accommodates up to seventeen 51 × 102 mm specimens |
| Lamp Life | ~1500 hours (air-cooled xenon arc lamp) |
| Temperature Range | Black Panel: 35–103 °C |
| Air Temperature (with refrigeration option) | 19–103 °C |
| Calibration | NIST-traceable CT202 (temperature) and CR20 (irradiance) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | UltraScan VIS |
| Product Type | Spectrophotometer |
| Instrument Type | Benchtop |
| Optical Geometry | d/8° integrating sphere |
| Light Source | Pulsed Xenon Lamp |
| Spectral Range | 360–780 nm |
| Repeatability | ≤ 0.03 ΔE*ab (CIE Lab, mean of 20 measurements on certified white tile) |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CRH1100-HSC |
| Spray Mode | Continuous/Cyclic Spray |
| Temperature Range | 20–70 °C |
| Chamber Volume | 1103 L |
| Humidity Control | Full-Variable RH via Air Preconditioning System |
| Spray Function | Adjustable High-Flow Liquid Shower Module |
| Nozzle Maintenance | Automatic Self-Cleaning Mechanism |
| Internal Solution Reservoir | 120 L with Filtration & Low-Level Alarm |
| Compliance | GMW 14872, SAE J2334, ISO 11997, VW PV1210, Ford CETP, Renault D17 2025, JASO M609, GB/T 24135, Prohesion™ Protocol |
| Brand | Calpas |
|---|---|
| Model | CALPAS |
| Origin | South Korea |
| Instrument Type | Automated Optical Impurity Detection System for Polymer Powders & Pellets |
| Measurement Principle | High-Resolution Digital Imaging + Multispectral Color Discrimination + Geometric Morphology Analysis |
| Detection Range | 50–30,000 µm |
| Throughput | 500 g powder / 3 min |
| Repeatability | STD < 1% (powder), STD < 5% (pellets) |
| Compliance | ISO 14484, ASTM D7618 (referenced), GLP-aligned data audit trail capability |
| Illumination Options | Adjustable multi-source LED (central, square, coaxial, backlight) |
| Camera | High-speed monochrome/RGB CCD (user-specifiable resolution & frame rate) |
| Feed System | 3-axis vibratory feeder with amplitude & height control |
| Software | CALPAS Vision v4.x with customizable impurity classification, batch reporting, and calibration traceability per ISO/IEC 17025 guidelines |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model Series | HunterLab Spectrophotometric Colorimeters |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | d/8° Integrating Sphere (UltraScan Pro, UltraScan VIS), 0°/45° (Agera), 45°/0° (ColorFlex EZ, MiniScan EZ), 0°/30° (Aeros, STHT), d/0° (Vista) |
| Light Source | Xenon Arc Lamp |
| Spectral Range | 360–780 nm (UltraScan VIS), 350–1050 nm (UltraScan Pro), 400–700 nm (select models) |
| Repeatability | ΔE*ab ≤ 0.03 (average, CIE Lab scale) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | ColorFlex EZ-Citrus |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | 45°/0° |
| Light Source | Pulsed Xenon Lamp |
| Spectral Range | 400–700 nm |
| Repeatability | ≤ 0.04 ΔE* (CIE L*a*b*, 20 measurements on standard white tile) |
| Inter-instrument Agreement | ≤ 0.15 ΔE* (CIE L*a*b*, average across units) |
| Aperture Size / Measurement Area | 31.8 mm (1.25″) / 25.4 mm (1.00″) |
| Illuminants | A, C, D65, TL84, F |
| Standard Observers | 2° and 10° |
| Color Spaces | CIE XYZ, Yxy, L*a*b*, L*C*h°, Hunter Lab |
| Color Indices | ΔE*, ΔE, ΔEcmc, Whiteness, Yellowness, Metamerism Index, Brightness at 457 nm, Citrus Number, Citrus Redness, Citrus Yellowness |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | QUV/se, QUV/spray |
| Irradiance Range | 0.48–0.95 W/m² @ 340 nm |
| Exposure Duration | 1–9999 hours (programmable) |
| UV Wavelength Range | 250–400 nm |
| Chamber Capacity | Up to 48 specimens (75 mm × 150 mm each) |
| Compliance | ASTM G154, ISO 4892-3, IEC 61215, SAE J2020, GB/T 14522, FDA 21 CFR Part 11 (software-enabled audit trail optional) |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | Xe-3HSE |
| Xenon Lamp Power | 1800 W × 3 |
| Irradiance Range | 0.55–1.3 W/m²/nm @ 340 nm |
| Light Exposure Cycle | 1–999 h |
| Humidity Range | 20–95% RH |
| Brand | Kurabo |
|---|---|
| Origin | Japan |
| Model | NR-2100IB |
| Measurement Principle | Infrared Reflectance Absorption (Rotating Filter Method) |
| Thickness Range | 0.1–10 µm |
| Repeatability | < 0.01 µm |
| Measurement Area | 518 × 36 mm (elliptical) |
| Dimensions (W×D×H) | 100 × 210 × 145 mm |
| Weight | ~1.5 kg |
| Light Source Configuration | P-polarized Incident Beam |
| Integrated Thermal Printer | Yes |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Qsun QUV |
| Irradiance Range | 0.48–0.95 W/m² |
| Exposure Duration | 1–9999 hours (adjustable per standard) |
| UV Wavelength Range | 250–400 nm |
| Chamber Capacity | Up to 48 specimens (75 mm × 150 mm each) |
Show next