Testing Machine
Filter
Showing 3121–3150 of 3402 results
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.312 |
| Applicable Standards | JIS P8125, TAPPI T489, ISO 2493 |
| Test Principle | Cantilever bending at 15° deflection with 50 mm moment arm |
| Measurement Output | Stiffness (mN·m) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.312-D |
| Test Standards | JIS P8125, TAPPI T489, ISO 2493 |
| Maximum Torque | 490 mN·m (5,000 gf·cm) |
| Load Scale | 0–100 (dual-side) |
| Applied Loads | 100 gf, 200 gf, 500 gf |
| Load Arm Distance from Rotation Axis | 100 mm |
| Deflection Angles | ±15° and ±7.5° |
| Angular Speed | 180 ± 40°/min |
| Specimen Width | 30–40 mm (standard: 38.0 ± 0.2 mm) |
| Specimen Length | 70 mm |
| Max. Specimen Thickness | ≤3.2 mm |
| Testing Roller Diameter (for test) | φ8.60 ± 0.05 mm |
| Adjustment Roller Diameter | φ8.93 ± 0.05 mm |
| Power Supply | AC 100 V, single-phase, 3 A, 50/60 Hz |
| Dimensions (W×D×H) | ~300 × 350 × 520 mm |
| Weight | ~25 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.323 |
| Test Area | 642 mm² (φ28.6 ± 0.1 mm aperture) |
| Specimen Size | 50 × 50 mm |
| Inner Cylinder Mass | 567 ± 0.5 g |
| Inner Cylinder Dimensions | OD φ76.2 mm, ID φ74 mm, H 254 mm |
| Outer Cylinder Dimensions | ID φ82.6 mm, H 254 mm |
| Calibration Marks | 127 mm from base |
| Air Volume Scale | 0–100 mL (25 mL increments), 100–350 mL (50 mL increments) |
| Operating Mode | Manual stopwatch or automatic timing |
| Compliance | JIS L1096, ASTM D726, TAPPI T460, ISO 5636-5, P8117 |
| Optional Accessory | φ10 mm orifice connector kit |
| Power | None (gravity-driven mechanical system) |
| Dimensions (W×D×H) | ~150 × 230 × 420 mm |
| Weight | ~20 kg |
| Extended Height (raised cylinder) | 580 mm |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.349 |
| Standard Compliance | JIS C 2107, JIS Z 2237 |
| Operation Mode | Manual and Motorized Options Available |
| Rolling Load | Self-weight only (no auxiliary pressure applied) |
| Application | Static roller-based adhesion conditioning for pressure-sensitive tapes and adhesive films |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.352 |
| Compliance Standards | JIS P8140, TAPPI T441, ISO 535 |
| Test Principle | Gravimetric Cobb Method (120-s immersion) |
| Sample Format | Flat sheet specimens (typically 125 mm × 125 mm) |
| Measurement Unit | g/m² |
| Applicable Materials | Non-absorbent to low-absorbent papers and paperboards |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.429 |
| Standards Compliance | JIS L1018, JIS L1096, ASTM D747 |
| Test Principle | Cantilever Beam Deflection Method |
| Load Range | Light-load configuration (typically ≤ 500 mN·m) |
| Angular Displacement Control | Fixed-angle deflection (e.g., 5°, 15°, 45° per standard protocols) |
| Specimen Clamping | Precision-machined chuck with adjustable grip force |
| Measurement Output | Apparent bending stiffness (mN·m/rad) and apparent bending modulus (cN·cm²/cm) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.514 |
| Standards Compliance | JIS K5400, JIS K5600-5-1, ISO 1519 |
| Test Method | Cylindrical Mandrel Bend (180°, 1–2 s dwell) |
| Configuration Options | No.514 and No.514-TYPE1 |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.517 |
| Type | Falling Weight Impact Tester |
| Applicable Standards | JIS K5400, JIS K5600-5-3, ASTM D2794, ISO 6272 |
| Optional Low-Temperature Configuration | No.517-L (with integrated refrigerated chamber) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.517-L |
| Instrument Type | Falling Weight Impact Tester |
| Standards Compliance | JIS K5400, JIS K5600-5-3, ASTM D2794, ISO 6272 |
| Temperature Control | Integrated cryogenic chamber (operating range: –30 °C to +50 °C) |
| Test Method | DuPont-style vertical drop impact with adjustable hammer mass (standard 1.0 kg, optional 0.5–2.0 kg) and variable drop height (10–100 cm in 1 cm increments) |
| Fixture | Dual-clamp specimen holder accommodating flat panels up to 150 mm × 150 mm × 6 mm thickness |
| Impact Head | Hemispherical steel indenter (Φ15.9 mm, Rockwell C58–62 hardness) |
| Repeatability | ≤±1.5% coefficient of variation (n=10, certified reference panels) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.541 |
| Applicable Standards | JIS A 1452, JIS A 5423, JIS K 5400 (H8503), JIS K 6791 (H8682-3), ASTM D968 |
| Test Principle | Gravitational sand-flow abrasion under fixed angle and height |
| Sample Mounting Angle | 45° |
| Sand Delivery | Free-fall from calibrated hopper |
| Endpoint Detection | Visual exposure of substrate through coating |
| Measurement Output | Time to failure (s) and cumulative sand mass (g) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.551 |
| Standards | JIS D 0202, JIS K 5400, JIS K 5600-5-6, ASTM D2197, ISO 2409 |
| Sample Stage | 90 × 90 mm, motorized 90° rotation |
| X/Y Travel Range | Max. 50 mm each axis |
| Cut Spacing | 0.5 / 1.0 / 1.5 / 2.0 mm (4-position selector) |
| Cutting Speed | 5 / 10 / 15 / 20 mm/s |
| Cut Count | Programmable via timer (standard: 6 or 11 cuts per direction) |
| Load Range | 10–350 gf (precision counterweight system) |
| Cutting Tool | φ3 mm stainless steel needle, 23 mm length, 60° tip angle |
| Optional Accessories | Electrical continuity module, blade alignment jig, linear displacement sensor |
| Power Supply | AC 100 V, single-phase, 5 A, 50/60 Hz |
| Dimensions (w/o guard) | 630 × 750 × 700 mm (W×D×H) |
| Weight | ~90 kg |
| Dimensions (with guard) | 630 × 750 × 760 mm |
| Weight | ~95 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.551-AUTO-2 |
| Test Standards | JIS D 0202, JIS K 5400, JIS K 5600-5-6, ASTM D2197, ISO 2409 |
| Sample Stage | 90 × 90 mm, 90° automatic rotation |
| Max. Travel | 50 mm (X & Y) |
| Cut Spacing | 0.5 / 1.0 / 1.5 / 2.0 mm (4-step selection) |
| Cutting Speed | 5 / 10 / 15 / 20 mm/s |
| Cut Count | Programmable via timer (standard: 6 or 11 cuts) |
| Load Range | 10–350 gf (counterweight-based) |
| Cutting Needle | φ3 mm diameter, 23 mm length, 60° tip angle |
| Power Supply | AC 100 V, 1-phase, 5 A, 50/60 Hz |
| Dimensions (w/o guard) | 630 × 750 × 700 mm (W×D×H) |
| Weight | ~90 kg |
| Dimensions (with guard) | 630 × 750 × 760 mm |
| Weight | ~95 kg |
| Optional Accessories | Electrical continuity module, blade mounting jig, sliding distance sensor |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.601 |
| Type | Belt Fatigue Tester for Steel Cord Reinforcement |
| Application | Cyclic Bending Fatigue Evaluation of Tire Steel Belts |
| Test Principle | Controlled Two-Point Bending via Rotating Mandrel |
| Compliance | Designed in accordance with JIS K 6301 and ISO 4892-2 (for test environment context), compatible with internal tire R&D lab protocols |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.603 |
| Type | Manual Bend-Repeat Fatigue Testing Instrument for Thin Flexible Films and Flexible Printed Circuits (FPCs) |
| Compliance | Designed per JIS K 7187 (Plastics — Determination of Flexural Fatigue Resistance) and ISO 13954 (Flexible Electrical Insulating Materials — Bend Test Methods) |
| Operating Principle | Cylindrical mandrel-driven repeated bending under controlled angular displacement and constant tensile preload |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.604 |
| Type | Manual Torsion Testing Instrument for Thin Polymeric Films and Flexible Circuit Substrates |
| Compliance | Designed for ASTM D882, ISO 527-3, and JIS K7127-compliant torsional deformation evaluation |
| Operating Principle | Mechanical torque application via calibrated handwheel with angular displacement control and fixed-end clamping |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.650 |
| Application | Golf club head abrasion resistance evaluation under controlled reciprocating motion |
| Drive Type | Electric motor-driven linear reciprocation |
| Load Application | Adjustable vertical dead-weight or pneumatic loading system (typical range: 0.5–10 N) |
| Stroke Length | Adjustable (e.g., 5–50 mm) |
| Reciprocating Frequency | 10–120 cycles/min |
| Test Duration Control | Programmable timer (0–9999 min) |
| Sample Mounting | Custom fixture for golf club head geometry (incl. hosel clamping and face-angle alignment) |
| Compliance | Designed in accordance with ISO 7148-1, ASTM D5963, and JIS K 6264-2 for rubber and coated surface abrasion testing |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.650-F |
| Test Motion | Reciprocating or Unidirectional |
| Load Application | Counterweight-based Dead-Weight Loading |
| Friction Force Measurement | Static and Kinetic Friction Separately |
| Sample Compatibility | Rigid and Semi-Rigid Flat Specimens (e.g., Plastics, Glass, Polymer Films) |
| Software | Dedicated Data Acquisition and Post-Processing Suite |
| Compliance Context | Designed for ASTM D1894, ISO 8295, JIS K 7124-1, and internal QC/QA protocols requiring traceable friction coefficient reporting |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.661 |
| Type | Automotive Door Handle Fatigue Testing Machine |
| Temperature Control | Triple-setpoint programmable thermal chamber (−20 °C, 23 °C, +80 °C) |
| Load Detection | Integrated load cell with automatic stop on threshold breach |
| Mounting | Dual-axis fixture—base clamp for handle base, upper actuator for operable lever |
| Compliance | Designed for JASO M404, ISO 12107, and SAE J2412 pre-compliance fatigue evaluation |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.662 |
| Type | Hinge-Actuated Lid Fatigue Testing Machine |
| Application Domain | Packaging Integrity Validation for Food, Cosmetics & Pharmaceutical Containers |
| Compliance Context | Designed for ISO 8504-2 / ASTM D3474 / JIS Z 1707-aligned hinge lifecycle assessment |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.663 |
| Compliance Standard | JIS S 1203 |
| Application Scope | Chairs, Stools, Luggage Handles, Backpack Straps, Cookware Handles |
| Load Application Method | Controlled Cyclic Vertical Force |
| Test Mode | Repetitive Load-Displacement Monitoring |
| Configuration | Floor-Standing Electromechanical Testing System |
| Control Type | Manual or Optional Programmable Controller |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.664 |
| Application | Simulated Internal Short Circuit Testing |
| Compliance Context | Aligns with UN 38.3, IEC 62133-2, UL 1642, and GB/T 31485 test protocols |
| Control Mode | Motorized precision penetration with adjustable speed/depth/thrust force |
| Penetration Mechanism | Linear actuator-driven stainless steel or tungsten carbide nail (diameter options: 2.0–5.0 mm) |
| Sample Holder | Dual-clamp fixture with insulated electrode isolation and thermal runaway containment design |
| Safety Features | Explosion-proof chamber, real-time temperature monitoring (±0.5 °C), integrated smoke detection, emergency stop with mechanical brake |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | China-sourced (Taiwan) |
| Model | YT-330 |
| Pricing | Available Upon Request |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1102 |
| Application | Top-load compression strength testing of PET/HDPE beverage bottles and rigid packaging containers |
| Test Modes | Top-load compression, side-load compression, tensile strength (film), tear resistance (film) |
| Compliance | Designed for routine QC in food packaging manufacturing per ISO 8775, ASTM D4577, and GB/T 13525 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1102 |
| Max Test Force | 5 kN |
| Load Application Rate | 500 N/s |
| Platen Spacing | 200 mm |
| Platen Dimensions | 400 mm × 400 mm |
| Force Resolution | 1/10,000 of full scale |
| Force Accuracy | ≤ ±0.1% FS |
| Displacement Resolution | 0.005 mm |
| Stroke | 650 mm |
| Test Width | 140 mm |
| Speed Range | 50–600 mm/min (adjustable) |
| Power Supply | 1PH, AC 220 V, 50/60 Hz, 10 A |
| Weight | ~55 kg |
| Dimensions (W×D×H) | 650 × 260 × 1050 mm |
| Standard Fixture | 1 set |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1103 |
| Instrument Type | Electronic Universal Testing Machine |
| Load Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N (dual-range configuration available) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ≤ ±0.5% of reading |
| Travel Resolution | 0.005 mm |
| Test Speed Range | 5–500 mm/min (PC-programmable) |
| Maximum Travel | 500 mm |
| Test Width | 140 mm |
| Control Interface | PC-based with USB connectivity |
| Data Acquisition | Real-time force/displacement sampling via dedicated interface board |
| Software Features | MS-ACCESS database integration, multi-curve overlay, automatic calculation of peak force, yield force, average peel force, elongation at break, yield point, and modulus of elasticity |
| Safety Modes | Overload shutdown, emergency stop, specimen rupture auto-stop, programmable upper/lower limit stops, automatic return-to-start |
| Drive System | Stepper motor + precision ball screw + synchronous timing belt |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Rated Power | 180 W |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Net Weight | ~45 kg |
| Standard Accessories | One set of peel/tensile fixtures, proprietary test software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-1103F |
| Load Cell Capacity Options | 10 N, 20 N |
| Test Speed Range | 0–600 mm/min |
| Test Travel Distance | 150 mm (6 in) |
| Test Platform Dimensions | 130 mm × 280 mm (5 in × 11 in) |
| Machine Dimensions (W×H×D) | 700 mm × 230 mm × 280 mm |
| Net Weight | 20 kg |
| Power Supply | AC 220 V |
| Compliance | ASTM D1894, GB/T 10006, ISO 8295 |
| Software Control | PC-based test software (optional accessory) |
| Brand | Yuelian |
|---|---|
| Model | YL-1103S |
| Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel | 500 mm |
| Test Width | 140 mm |
| Speed Range | 5–500 mm/min (programmable via PC) |
| Displacement Resolution | 1/500,000 full stroke |
| Control Interface | PC-based with USB connection |
| Drive System | Stepper motor + precision ball screw + synchronous timing belt |
| Power Supply | 220 V AC, 50/60 Hz, 5 A |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Weight | ~45 kg |
| Standard Accessories | One set of peel/clamp fixtures, proprietary test software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1123 |
| Capacity Options | 10 N to 20 kN (dual-range configurable) |
| Load Resolution | 1/250,000 full scale |
| Load Accuracy | ≤ ±0.5% FS |
| Displacement Resolution | 0.005 mm |
| Test Speed Range | 0.01–1000 mm/min (PC-programmable) |
| Maximum Travel | 700 mm |
| Test Width | 350 mm |
| Drive System | Servo motor + precision ball screw + timing belt |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Power Consumption | 400 W |
| Dimensions (W×D×H) | 72 × 52 × 130 cm |
| Weight | ~115 kg |
| Compliant Standards | ISO 7500-1, ASTM E4, EN 10002-1, JJG 475-88, GB/T 228, DIN 5122, JIS B7721/B7733, BS 1610 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1123 |
| Load Capacity | 2 kN (2 Ton) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ≤ ±0.5% FS |
| Stroke Resolution | 0.005 mm |
| Test Speed Range | 0.01–1000 mm/min (PC-programmable) |
| Maximum Travel | 700 mm |
| Test Width | 350 mm |
| Drive System | AC servo motor + precision ball screw + synchronous timing belt |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Rated Power | 400 W |
| Dimensions (W×D×H) | 72 × 52 × 130 cm |
| Weight | ~115 kg |
| Standard Accessories | One set of universal grips, proprietary test software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1123S |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 10 N to 20 kN (dual-range configurable) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel | 700 mm |
| Test Width | 420 mm |
| Speed Range | 0.01–1000 mm/min (programmable) |
| Displacement Resolution | 1/500,000 full scale |
| Control Interface | PC-based with USB connectivity |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Motor Type | AC servo motor with precision ball screw and synchronous belt drive |
| Dimensions (W×D×H) | 72 × 52 × 130 cm |
| Weight | ~115 kg |
| Compliant Standards | ISO 7500-1, ASTM E4, EN 10002-1, GB/T 228.1, GB/T 2792, ASTM D3330, GB/T 7124-2008, JJG 475 |