Testing Machine
Filter
Showing 1501–1530 of 3415 results
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JBWPW-200D |
| Type | Electro-hydraulic Servo Fatigue Testing Machine |
| Max Test Force | ≥200 kN |
| Force Measurement Range | 2–100% FS |
| Force Accuracy | ±0.5% of reading |
| Actuator Stroke | ≥155 mm |
| Displacement Accuracy | ±0.5% FS, Resolution: 0.001 mm |
| Frequency Range | 0.01–52 Hz |
| Waveform Options | Sinusoidal, Triangular, Ramp, and Composite |
| Test Height Adjustment Range | 200–1200 mm |
| Effective Test Width | ≥620 mm |
| Amplitude-Frequency Performance | 3 Hz at ±1 mm peak-to-peak displacement |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM5 |
| Instrument Type | Stone Chip Impact Tester |
| Operating Pressure Range | 0–0.8 MPa (adjustable) |
| Test Temperature | Ambient (optional low-/high-temperature chamber available) |
| Air Hose Inner Diameter | 20 mm / 15 mm |
| Air Reservoir Volume | 136 L |
| Nozzle Tube Inner Diameter | 30 mm / 53 mm |
| Specimen Orientation Angles | 45°, 54°, or 90° (flat specimens) |
| Sound Pressure Level | ≤120 dB(A) |
| Operation Mode | Continuous duty cycle |
| Impact Media | Gravel, crushed stone, calibrated abrasive particles |
| Feed Rate Control | Electromagnetic vibratory feeder |
| Airflow Pressure Control | Manual needle valve |
| Required Compressed Air Supply | User-provided |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JJ-20 |
| Quotation | Available Upon Request |
| Span Options | 40 mm, 60 mm, 62 mm, 70 mm, 95 mm |
| Specimen Width Range | 4–15 mm |
| Specimen Thickness Range | 3–10 mm |
| Pendulum Impact Velocity | 3.8 m/s |
| Pre-lift Angle | 150° |
| Distance from Pendulum Axis to Specimen Center | 380 mm |
| Charpy (Simply Supported Beam) Energy Levels | 4 J, 7.5 J, 15 J, 25 J |
| Izod (Cantilever Beam) Energy Levels | 5.5 J, 11 J, 22 J |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JJ-20-cczn |
| Sample Span Options | 40 mm, 60 mm, 62 mm, 70 mm, 95 mm |
| Specimen Width Range | 4–15 mm |
| Specimen Thickness Range | 3–10 mm |
| Pendulum Impact Velocity | 3.8 m/s |
| Display | LCD Digital Interface |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | JM-4 |
| Pricing | Upon Request |
| Motor | 40 W, 220 V, 50 Hz |
| Rotational Speed Range | 0–90 rpm |
| Sample Holder Diameter | Φ100 mm × 3 mm thick with Φ6.2 mm center hole |
| Abrasive Wheel Dimensions | Φ50 mm × 13 mm thick with Φ16 mm center hole |
| Standard Weights | 500 g, 750 g, 1000 g |
| Overall Dimensions (L×W×H) | 220 × 280 × 300 mm |
| Net Weight | 16 kg |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-117 |
| Origin | Shanghai, China |
| Compliance | GB 24911–2010, GB 15831–2006, GB/T 228.1–2021, GB/T 7314–2017, ASTM E8/E8M, ISO 6892-1, EN 10002-1 |
| Load Capacity | Up to 300 kN (configurable) |
| Control System | Digital closed-loop servo control with 100 kHz data acquisition |
| Test Speed Range | 0.001–500 mm/min (adjustable) |
| Displacement Resolution | ≤ 0.001 mm |
| Force Accuracy | ±0.5% of full scale |
| Software | Windows-based test platform with audit trail, user-level permissions, and 21 CFR Part 11 compliant reporting modules |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JTX |
| Pricing | Available Upon Request |
| Brush Dimensions | 38 × 90 mm |
| Brush Mass (incl. holder) | 450 ± 2 g |
| Stroke Length | 300 mm |
| Reciprocating Frequency | 37 ± 1 cycles/min |
| Counter | 4-digit digital display |
| Test Panel Size | 430 × 150 × 5 mm |
| Motor Power | 90 W |
| Power Supply | 380 V, 50 Hz (220 V optional) |
| Overall Dimensions (L×W×H) | 600 × 430 × 450 mm |
| Net Weight | 44 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic |
| Model | JTX-II |
| Pricing | Upon Request |
| Brush Dimensions | 38 × 90 mm base with 60 evenly spaced Ø3 mm holes for hog bristles, bristle length 19 mm |
| Brush Mass (incl. holder) | 450 ± 2 g |
| Liquid Drip Rate | ~0.04 g/s |
| Stroke Length | 300 mm |
| Brushing Frequency | 37 ± 1 cycles/min |
| Counter Display | 5-digit LED |
| Maximum Count | 99,999 cycles |
| Test Panel Size | 430 × 150 × 3 mm |
| Motor Power | 25 W |
| Power Supply | 220 V, 50 Hz |
| Overall Dimensions | 570 × 420 × 300 mm |
| Net Weight | 32 kg |
| Key | Load Capacity: 10 kN (single-range) |
|---|---|
| Force Accuracy | ±1% of reading (0.2–10 kN) |
| Displacement Resolution | 0.01 mm |
| Crosshead Speed Range | 0.01–500 mm/min (infinitely variable) |
| Tensile Test Space | 600 mm |
| Compression Test Space | 700 mm |
| Test Width | 360 mm |
| Power Supply | 750 W, 220 V, 50 Hz |
| Operating Environment | 10–35 °C, 20–80% RH |
| Dimensions (W×D×H) | 770 × 570 × 1800 mm |
| Weight | >265 kg |
| Compliance | GB/T 17657, GB/T 5849, GB/T 1936.2, GB/T 1937, GB/T 1941, ISO 16978, ASTM D1037, EN 310, EN 319, EN 322 |
| Brand | JuBin |
|---|---|
| Model | JB-121 |
| Capacity Range | 0–5 kN (user-selectable) |
| Load Cell Accuracy | ±0.5% of full scale |
| Effective Test Width | 380 mm |
| Max. Traverse Travel | 1000 mm |
| Test Speed Range | 0.001–500 mm/min (infinitely variable) |
| Displacement Resolution | 1/200,000 |
| Positioning Accuracy | ±0.005% of full stroke |
| Control System | Servo motor (Japan-made) + AC motor (Taiwan-made) |
| Mechanical Drive | Precision ball screw (Taiwan-made) + High-strength backlash-free screw (Korea-made) |
| Safety Features | Upper/lower mechanical limits, emergency stop button |
| Display Interface | Dual-mode — PC-based software + embedded microcomputer display |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 1080–1180 kg |
| Dimensions (W×D×H) | 1280 × 950 × 1800 mm |
| Compliance | Designed for ASTM E4, ISO 7500-1, GB/T 228.1, and general QC/QA laboratory requirements |
| Brand | JuBin |
|---|---|
| Origin | Taiwan |
| Model | JB-124A / JB-124B |
| Load Capacity | 0–5 ton (user-selectable) |
| Force Sensing | High-precision U.S.-sourced load cell |
| Force Accuracy | ≤0.5% of full scale |
| Effective Test Width | 380 mm |
| Max. Tensile Travel | 1000 mm |
| Drive System | Servo motor (Japan) + AC motor (Taiwan) |
| Mechanical Transmission | Precision ball screw (Taiwan) + High-strength backlash-free screw (Korea) |
| Test Speed Range | 0.001–500 mm/min (infinitely variable, dual-range options) |
| Displacement Accuracy | ±0.005% |
| Resolution | 1/200,000 |
| Safety Features | Upper/lower mechanical limits, emergency stop button |
| Display Interface | Dual-mode — PC-based software + embedded microcomputer display |
| Unit Options | g, kg, N, kN, lb, lbf |
| Power Supply | 220 V / 380 V, 50 Hz |
| Net Weight | 1080–1180 kg |
| Dimensions (W×D×H) | 1280 × 950 × 1800 mm |
| Fixture | One standard set (customizable per sample requirements) |
| Optional Accessories | PC host, desktop printer, extensometer, proprietary test software |
| Brand | JuBin |
|---|---|
| Model | JB-124A |
| Load Capacity | 0–20 ton (user-selectable) |
| Force Sensing | High-precision load cell (USA-made) |
| Force Accuracy | ±0.5% of full scale |
| Effective Test Width | 380 mm |
| Max. Traverse Travel | 1000 mm |
| Drive System | Servo motor (Japan-made) + AC motor (Taiwan-made) |
| Mechanical Transmission | Precision ball screw (Taiwan-made) + High-strength backlash-free screw (Korea-made) |
| Test Speed Range | 0.001–500 mm/min (infinitely variable) |
| Displacement Resolution | 1/200,000 |
| Displacement Accuracy | ±0.005% of full stroke |
| Safety Features | Upper/lower mechanical limits, emergency stop button |
| Display Interface | Dual-mode — PC-based software + embedded microcomputer display |
| Unit Options | g, kg, N, kN, lb, lbf |
| Power Supply | 220 V / 380 V, 50 Hz |
| Net Weight | 1180 kg |
| Dimensions (W×D×H) | 1280 × 950 × 1800 mm |
| Origin | Taiwan |
| Compliance | Designed for ASTM E4, ASTM E8, ISO 6892-1, ISO 7500-1, GB/T 228.1 |
| Brand | JUJEN Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-117B |
| Instrument Type | Electronic Universal Testing Machine |
| Category | Physical Property Testing Instrument |
| Brand | Kaelge |
|---|---|
| Origin | Germany |
| Model | IMPact 5.5/15(25) |
| Impact Energy Range | 0.5–5.5 J (IMPact 5.5) |
| Compliance Standards | EN ISO 179, EN ISO 180, ASTM D 256 (Methods A & B), ISO 8256 |
| Test Configurations | Charpy (simply supported beam), Izod (cantilever beam), Tensile Impact |
| Control System | Microprocessor-based with keypad and LCD display (4-language support) |
| Output Interfaces | RS-232 serial port, parallel printer port |
| Key Functions | Automatic pendulum braking, built-in sample centering for Charpy fixtures, real-time energy calculation (absorbed energy, recovered elastic energy, rise angle, impact velocity), on-access auto-test initiation, pendulum calibration verification and report generation, FIFO storage of up to 50 test results with statistical evaluation (mean, standard deviation) |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Instrument Type | Free-Fall Dart Impact Tester |
| Standards Compliance | ASTM D1709, ISO 7765-1 |
| Impact Energy Range | As per manufacturer’s specification sheet |
| Impact Velocity | As per manufacturer’s specification sheet |
| Dart Mass Options | Standardized (e.g., 50 g, 100 g, 200 g) per ASTM/ISO |
| Maximum Drop Height | Adjustable up to 2,000 mm (typical range) |
| Load Cell Capacity | Configurable (e.g., ±500 N full scale) |
| Test Mode | Single-dart or multi-dart statistical mode (50% failure threshold determination) |
| Data Output | Analog + digital (RS-232 / USB) |
| Safety Enclosure | Interlocked transparent polycarbonate shield |
| Brand | Kegge |
|---|---|
| Origin | Germany |
| Model | proTens |
| Maximum Load Capacity | 250 kN |
| Drive System | Dual-arm screw-driven with solid-state servo and electric control |
| Load Resolution | 120,000 counts |
| Load Accuracy | Class 1 per DIN EN ISO 7500 (0.4–100% of full scale) |
| Test Speed Range | 0.01–2000 mm/min |
| Motor Power Options | 300 W or 900 W |
| Software Interface | Human-centered, compliant with GLP/GMP data integrity requirements |
| Safety Features | Adjustable overload shutdown, quick-release sensor & grip system, precision crosshead guidance |
| Sample Compatibility | Metals, plastics, elastomers, foams, paper, wood, textiles, wires, and finished components |
| Test Modes | Tension, compression, bending, shear, peel |
| Brand | Kegge |
|---|---|
| Origin | Germany |
| Model | smarTens |
| Load Capacity | 20 kN |
| Load Accuracy | Class 1 per DIN EN ISO 7500 (optional Class 0.5) |
| Crosshead Positioning Accuracy | < 1 µm |
| Speed Range | 0.01–1000 mm/min |
| Control System | Solid-state servo motor with dual-arm screw drive |
| Software | Integrated PC-based control and analysis platform |
| Compliance | DIN EN ISO 7500-1, ASTM E4, ASTM E8/E21, ISO 6892-1, ISO 178, ISO 14129, ISO 14130 |
| Sample Compatibility | Metals, plastics, elastomers, foams, paper, wood, textiles, composites, wire, finished components |
| Safety Features | Adjustable overload cutoff, quick-release load cell & fixture interface, precision crosshead guidance system |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | QJPLA-5 |
| Instrument Category | Electromechanical Universal Testing Machine |
| Test Speed | 1–360 cycles/min (adjustable) |
| Actuation Force Options | 50 g, 100 g, 200 g, 300 g standard weights |
| Vertical Stroke Range | 0–50 mm (adjustable), with fixed 10 mm nominal compression travel |
| Test Platform Dimensions | 80 × 80 mm |
| Electrical Continuity Monitoring | Real-time contact resistance detection |
| Motion Mechanism | Linear bearing-guided vertical actuation for repeatable axial alignment |
| Cycle Counter Resolution | 8-digit programmable counter (0–99,999,999 cycles) with auto-halt |
| Probe Mounting Height Adjustment | 0–150 mm vertical range |
| Power Supply | 220 V AC, 50 Hz |
| Warranty | 12-month comprehensive coverage |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model Series | G200, iMicro, iNano, InSEM |
| Application Domain | In-situ Mechanical Characterization, Dynamic & Static Nanoindentation, Multi-modal Correlative Analysis |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model Series | G200, T150, iNano, inSitu |
| Application Domain | In-situ nanomechanical characterization with CSM, high-resolution imaging integration, and multi-modal correlative testing |
| Brand | Keysight |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model Variants | LFH (Axial Fatigue), BFH (Portable Servo Actuator SERVO PAQ II), RFH (Torsional Fatigue), DFH (Static Torsion), FFH (Rotating Bending Fatigue) |
| Test Force Capacity | Configurable up to 250 kN (standard variants) |
| Frequency Range | 0.001–100 Hz (electromechanical) |
| Host Weight | 180–3,200 kg (model-dependent) |
| Actuation Type | Electro-hydraulic servo (LFH/RFH), electromechanical servo (BFH/DFH/FFH) |
| Waveform Capability | Sinusoidal, triangular, trapezoidal, rectangular, user-defined arbitrary waveforms |
| Control Mode | Closed-loop force, displacement, strain, or torque control |
| Brand | Keysight |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | UTM 150 |
| Maximum Test Force | ±500 mN |
| Force Resolution | 50 nN |
| Actuator Displacement Range | ±1 mm |
| Displacement Resolution | 0.1 nm |
| Dynamic Displacement Resolution | < 0.001 nm |
| Crosshead Travel | 150 mm |
| Tensile Resolution | 35 nm |
| Tensile Rate | 0.5 µm/s to 5 mm/s |
| Dynamic Frequency Range | 0.1 Hz to 2.5 kHz |
| Loading Modes | Constant Load Rate, Constant Displacement Rate, Constant Strain Rate, Step Loading |
| Compliance | ASTM E8/E21, ISO 6892-1, USP <1042>, GLP/GMP-ready data audit trail |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | KJY-A |
| Pricing | Available Upon Request |
| Max Operating Temperature | 1650 °C |
| Short-Term Peak Temperature | 1700 °C |
| Chamber Dimensions (L×W×H) | 320 mm × 210 mm × 190 mm |
| Heating Rate | 0–15 °C/min |
| Temperature Uniformity (at Setpoint) | ±2 °C |
| Transformer Capacity | 12 kVA |
| Rated Power | 12 kW |
| Input Supply | Dual-Voltage Configuration — 380 V AC, 50 A, 50 Hz (single-phase) or 220 V AC, 5 A, 50 Hz (single-phase) |
| Overall Dimensions (L×W×H) | Furnace Unit: 0.8 m × 0.7 m × 1.7 m |
| Control Cabinet | 0.55 m × 0.55 m × 1.6 m |
| Net Weight | 600 kg |
| Brand | KLA |
|---|---|
| Origin | USA |
| Model | K-T G200 / I-Nano / Insitu |
| Application | In-situ nanomechanical characterization with optical, electrical, and structural correlation |
| Brand | SMS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Koenen |
| Price Range | USD 14,000 – 70,000 |
| Instrument Type | Multi-Functional Tribological Tester |
| Max Friction Force | 20 N |
| Friction Force Resolution | 4 mN |
| Max Operating Temperature | 400 °C |
| Brand | KRK |
|---|---|
| Origin | Japan |
| Model | KRK 2000D |
| Maximum Load Capacity | 500 N (standard) |
| optional | 100 N, 200 N, 1000 N |
| Gauge Length | 100–180 mm |
| Elongation Range | up to 20 mm (at 180 mm gauge length) |
| Tensile Speed | 2–50 mm/min |
| Specimen Width | 15 mm or 25 mm |
| Clamping Method | Pneumatic jaws |
| Power Supply | 100/110/220 V AC, 50/60 Hz, 2 A |
| Air Supply | 0.4–0.6 MPa |
| Dimensions (W×D×H) | 700 × 430 × 440 mm |
| Weight | 38 kg |
| Compliance | TAPPI T494, ISO 1924-2, GB/T 12914 |
| Brand | KURASHIKI |
|---|---|
| Origin | Japan |
| Model | EST-58-450 |
| Type | 6-DOF Active Vibration Isolation Platform |
| Compliance | Cleanroom-Compatible (ISO Class 5–7), No Compressed Air Required |
| Control Interface | USB 2.0 |
| Display | Integrated LCD for Real-Time Acceleration Time-Waveform & FFT Spectrum |
| Leveling Mode | Motorized Auto-Leveling with Transport Lock Toggle |
| Construction | Sealed Anodized Aluminum Enclosure & Top Plate |
| Brand | KURASHIKI |
|---|---|
| Origin | Japan |
| Model | MINI560F |
| Type | 6-DOF Active Vibration Isolation Platform |
| Design | Compact Desktop Form Factor |
| Compliance | Cleanroom-Compatible (Sealed Aluminum Enclosure, No Compressed Air Required) |
| Control Interface | USB Communication with Real-Time Acceleration Time-Waveform & FFT Spectrum Display |
| Operation Modes | Auto-Leveling Mode / Transport Lock Mode |
| Typical Applications | Atomic Force Microscopy (AFM), Scanning Probe Microscopy (SPM), Laser Confocal Microscopy, Microhardness Testers, Interferometers |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 050101 |
| Price | Upon Request |
| Max Load Capacity | 100 kN (configurable options: 10, 20, 30, 50, 100 kN) |
| Load Accuracy | ±2 N |
| Displacement Resolution | 0.01 mm |
| Crosshead Speed Range | 1–350 mm/min (adjustable) |
| Return Speed | 350 mm/min |
| Platen Dimensions | Up to 1500 × 1500 mm |
| Maximum Test Height | 1500 mm |
| Platen Parallelism | ±1 mm |
| Platen Flatness | <0.25 mm |
| Compliance Standards | DIN EN 22872, ISO 12048, TAPPI T804, UNE 57163/5, FEFCO No. 50, AFNOR H13-001 |
| Brand | Labthink |
|---|---|
| Origin | Jinan, Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | BLD-200N |
| Instrument Category | Electronic Tensile Testing Machine |
| Load Accuracy Class | Class 1 |
| Maximum Load Capacity | 0–200 N (optional ranges: 30 N, 50 N, 100 N) |
| Resolution | 0.01 N |
| Test Speed Options | 50, 100, 150, 200, 250, 300, 500 mm/min |
| Specimen Width Limit | ≤30 mm |
| Travel Distance | 500 mm |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 1000 × 370 × 400 mm |