- All
- Favorite
- Popular
- Most rated
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Model | CS2000M |
| Measurement Range | C: 0–100%, S: 0–100% |
| Accuracy | ±1% of measured content |
| Analysis Time | 90 s (typical) |
| Sample Mass | 300–500 mg |
| Combustion Temperature | Ambient to 1400 °C |
| Oxygen Purity | >99.5%, Pressure: 40 PSI |
| Gas Flow Rate | 3.0 L/min |
| Reagent | Magnesium Perchlorate |
| Interface | 4 RS-232 ports for analytical balance integration |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Model | CSBox-Tube-S |
| Measurement Range | 0.005–100 wt% S |
| Accuracy | ±1% relative (typical samples) |
| Sample Mass | 10–200 mg |
| Analysis Time | 40–300 s |
| Combustion Temperature | 800–1500 °C (configurable by mode) |
| Interface Protocol Support | Sartorius, Mettler, Precia, Ohaus (RS-232/USB), manual entry |
| Data Output | LPT, COM, USB, LAN (RJ45) |
| Operating System | FreeDOS on Advantech industrial motherboard |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | ASHSCAN |
| Pricing | Available Upon Request |
| Conveyor Belt Width | Up to 1400 mm |
| Belt Speed | Unlimited |
| Sample Height | Up to 400 mm (standard) |
| Bottom Width | 100–400 mm |
| Ash Content Range | 0–100% |
| Measurement Interval | User-Configurable Real-Time Sampling |
| Typical Accuracy | ±0.9% for raw coal, ±0.6% for washed coal, ±0.3% for pulverized single-layer coal |
| Power Supply | 240 V, 50 Hz, 2 A |
| Output Signals | Dual 4–20 mA — instantaneous ash % and mass-normalized ash % (tonnage-based) |
| Operating Temperature | 0–45 °C (indoor installation, no direct sunlight or rain exposure) |
| Relative Humidity | 0–95% RH (non-condensing) |
| Key | Origin: France |
|---|---|
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Measurement Range | C: 0–100%, S: 0–100% |
| Accuracy | ±1% relative (typical samples) |
| Sample Mass | 10–200 mg |
| Analysis Time | 40–300 s |
| Combustion Temperature | 800–1550 °C |
| Carrier Gas | O₂ or ambient air (for inorganic matrices) |
| Power Supply | 230 V, 0.75–2 A |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | CSBox-Tube |
| Pricing | Upon Request |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ES14 |
| Price | Upon Request |
| Temperature Range | 100–950 °C |
| Temperature Accuracy | ±10 °C |
| Thermocouple Type | Type K (max. 1200 °C), Type N (max. 1300 °C) |
| Furnace Tube Material | Fused quartz (Ø25 × 500 mm ID) |
| Reaction Vessel Material | Borosilicate glass |
| Furnace Housing & Structural Plate | Stainless steel (AISI 304) |
| Air Flow Control Range | 0.1–2.0 L/min (adjustable via needle valve and rotameter, calibrated 60–600 cm³/min) |
| Over-Temperature Protection | Independent dual-stage cutoff controller |
| Power Supply | 230 V AC, 50 Hz, 500 W |
| Net Weight | 22 kg |
| External Dimensions (W×D×H) | 1350 × 275 × 355 mm |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | IF2000 |
| Pricing | Available Upon Request |
| Max Furnace Temperature | 1600 °C (Peak: 1650 °C) |
| Operating Temp Range | 200–1550 °C |
| Atmosphere Control | Oxidizing or Reducing |
| Sample Capacity | 2 crucibles per run |
| Temperature Resolution | 4 °C |
| Image Capture Interval | 5 °C |
| Compliance | ASTM D1857, ISO 540, DIN 51730, AFNOR M03-003, AS 1038.19 |
| Brand | BUCK |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | TGA2000A |
| Pricing | Available Upon Request |
| Sample Capacity | 20-position (standard), optional 40-position carousel |
| Temperature Range | 50–1000 °C |
| Temperature Accuracy | ±1 °C |
| Sample Mass Range | 0.1–10 g |
| Weight Loss Resolution | ±0.0002 g |
| Max. Weight Loss | 0–100% |
| Measurement Parameters | Moisture, Volatile Matter, Ash, Fixed Carbon, Loss on Ignition (LOI) |
| Automation Level | Fully Automated Dual-Rotary Carousel with Patented Crucible Lid Handling |
| Safety Certification | CE-compliant high-temperature chamber (operational up to 600 °C without lid opening risk) |
| Compliance | ASTM D3172, D3173, D3174, D3175 |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CSBox-HF |
| Detection Method | Non-Dispersive Infrared (NDIR) |
| Measurement Range | C: 0.001–4 wt% |
| S | 0.002–1 wt% (extendable to 100% via sample weight reduction) |
| Precision | ±1% relative (for majority of solid inorganic samples) |
| Analysis Time | 20–60 s (typical) |
| Sample Mass | 100–2000 mg |
| Combustion Temperature | 1300–1500 °C (HF induction furnace) |
| Power Supply | 180–240 V AC, 50/60 Hz |
| HF Furnace Rating | 3.5 kW |
| Dimensions (Furnace) | 200 × 90 × 360 mm (L×W×H) |
| Weight | 24 kg (total system) |
| Carrier Gas | Ultra-high-purity O₂ (≥99.5%), 1 bar, ~2 L per analysis |
| Pump | External diaphragm pump with Viton seals (Germany-sourced) |
| (Imported from | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CSBox-Tube-S |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Measurement Range | 0.005–100% S |
| Accuracy | ±1% relative |
| Sample Weight | 10–200 mg |
| Analysis Time | 40–300 s |
| Combustion Temperature | 800–1550 °C |
| Gas Supply | O₂ or ambient air (for inorganic samples) |
| Dimensions (H×W×D) | 500 × 360 × 500 mm |
| Power Supply | 230 V, 0.75–2 A |
| Compliance | ASTM D4294, ISO 4319, ISO 10723, EN 15407, USP <281>) |
Show next