Blue M
Filter
Showing 31–60 of 75 results
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF-8880 |
| Temperature Range | Ambient +15°C to 593°C (1099°F) |
| Temperature Uniformity | ±2% of setpoint |
| Temperature Stability | ±2% of setpoint |
| Temperature Deviation | ±0.5°C |
| Chamber Dimensions (W×H×D) | 25 × 20 × 20 cm |
| Heating Element | Open-wire Ni-Chrome |
| Inert Gas Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ in N₂) |
| Safety Features | Door interlock (heater & blower shutdown), gas leak alarm with automatic heater cutoff, pressure monitoring, purge timer, pressure relief valve, water-cooled door (IGF-8880/9980 models) |
| Insulation | 6-inch mineral wool |
| Door Seal | Fiberglass-reinforced silicone gasket |
| Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF-8880 |
| Temperature Range | Ambient +15°C to 593°C (1099°F) |
| Temperature Uniformity | ±2% of setpoint |
| Temperature Stability | ±2% of setpoint |
| Temperature Deviation | ±0.5°C |
| Internal Chamber Dimensions (W×H×D) | 25 × 20 × 20 cm |
| Heating Element | Open-type NiCr wire |
| Cooling | Water-cooled door (IGF-8880 & IGF-9980) |
| Gas Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ in N₂) |
| Safety Compliance | NFPA 86 Class B |
| Insulation | 6-inch mineral wool |
| Door Seal | Fiberglass-reinforced silicone gasket |
| Airflow System | High-capacity horizontal laminar flow |
| Pressure & Flow Monitoring | Integrated chamber pressure gauge and mass flow controller |
| Exhaust Interface | 3/8" NPT inlet/outlet with purge timer and relief valve |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF-8880 |
| Temperature Range | Ambient +15°C to 593°C (1099°F) |
| Temperature Uniformity | ±2% of setpoint |
| Temperature Stability | ±2% of setpoint |
| Temperature Deviation | ±0.5°C |
| Internal Chamber Dimensions (W×H×D) | 25 × 20 × 20 cm |
| Heating Element | Open-wire NiCr |
| Atmosphere Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ in N₂) |
| Safety Features | Door interlock, inert gas leak detection with heater shutdown, pressure monitoring, purge timer, pressure relief valve, water-cooled door (IGF-8880 & IGF-9980) |
| Insulation | 6-inch mineral wool |
| Door Seal | Blue M proprietary fiberglass gasket |
| Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF-8880 |
| Temperature Range | Ambient +15°C to 593°C (1099°F) |
| Uniformity | ±2% of setpoint |
| Temperature Stability | ±2% of setpoint |
| Temperature Deviation | ±0.5°C |
| Heating Rate | Ambient +15°C to 593°C (1099°F) |
| Internal Chamber Dimensions (W×H×D) | 25 × 20 × 20 cm |
| Chamber Construction | Welded stainless steel inner chamber with inert gas compatibility |
| Gas Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ / 96% N₂) |
| Cooling | Water-cooled door (IGF-8880 & IGF-9980 models) |
| Safety Features | Door interlock (heater/fan shutdown), leak detection alarm with automatic heater cutoff, pressure monitoring, purge timer, relief valve |
| Insulation | 6-inch mineral wool |
| Airflow | High-capacity horizontal laminar flow system |
| Sealing | Fiberglass-reinforced silicone door gasket |
| Compliance | NFPA 86 Class B oven certification |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF7780 |
| Temperature Range | Ambient +15°C to 593°C (1099°F) |
| Temperature Uniformity | ±2% of setpoint |
| Temperature Stability | ±2% of setpoint |
| Temperature Deviation | ±0.5°C |
| Chamber Dimensions (W×H×D) | 25 × 20 × 20 cm |
| Heating Element | Open Heavy-Duty Nichrome Wire |
| Insulation | 6-inch Mineral Wool |
| Door Seal | Fiberglass Gasket |
| Gas Compatibility | N₂, Ar, CO₂, He, and Forming Gas (4% H₂ / 96% N₂) |
| Safety Features | Door-Interlocked Heater/Fan Shutdown, Leak Detection Alarm with Auto Heater Disable, Pressure Monitoring, Purge Timer, Relief Valve |
| Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF7780 |
| Temperature Range | Ambient +15°C to 593°C (1099°F) |
| Max Operating Temperature | 400°C (standard configuration, up to 593°C rated) |
| Uniformity | ±2% of setpoint |
| Temperature Stability | ±2% of setpoint |
| Temperature Deviation | ±0.5°C |
| Chamber Dimensions (W×H×D) | 25 × 20 × 20 cm |
| Internal Volume | 5.8 ft³ (0.164 m³) |
| Heating Element | Open-wire NiCr |
| Gas Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ / 96% N₂) |
| Safety Features | Door interlock, inert gas leak detection with heater shutdown, pressure monitoring, purge timer, relief valve |
| Insulation | 6-inch mineral wool |
| Door Seal | High-temperature fiberglass gasket |
| Cooling | Air-cooled door (IGF7780) |
| Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF7780 / IGF8880 |
| Temperature Range | Ambient +15°C to 593°C (1099°F) |
| Max Operating Temperature | 400°C (standard configuration, up to 593°C with optional upgrades) |
| Temperature Uniformity | ±2% of setpoint |
| Temperature Stability | ±2% of setpoint |
| Temperature Deviation | ±0.5°C |
| Heating Rate | Ambient +15°C to 593°C in typical ramp profile |
| Internal Chamber Dimensions (W×H×D) | 25 × 20 × 20 cm |
| Construction | Dual-wall stainless steel chamber with liquid-cooled door (IGF8880), inert gas-compatible sealed cavity |
| Gas Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ / 96% N₂) |
| Safety Certifications | NFPA 86 Class B compliant |
| Insulation | 6-inch mineral wool |
| Airflow | High-capacity horizontal laminar flow system |
| Control Resolution | ±0.1°C |
| Power Supply | 208–480 VAC, 3-phase, 50/60 Hz |
| Electrical Load | 15.7–30.0 kW (model-dependent) |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Inert Gas Cabinet Oven |
| Max Temperature | 316°C |
| Temperature Uniformity | ±2% of setpoint |
| Max Power | 48 kW |
| Ramp Time to Max Temp | 60 min |
| Heating Method | Forced-air convection |
| Internal Dimensions | 60.7 × 60.7 × 121.9 mm (W×D×H) |
| Compliance | NEC-compliant design, UL-listed components |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Inert Atmosphere Oven |
| Temperature Range | Ambient +15°C to 700°C |
| Temperature Uniformity | ±1% (at ≤316°C), ±2% (at 700°C) |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Heating Method | Forced Air Convection |
| Internal Dimensions | 20×18×20 in to 48×24×36 in (508×457×508 mm to 1219×610×914 mm) |
| Internal Volume | 1.6–24 cu.ft (0.045–0.679 m³) |
| Max Power | 7500 W |
| Ramp Time to Max Temp | ≤60 min |
| Insulation | 4-inch (102 mm) mineral wool |
| Chamber Material | Fully welded 304 stainless steel |
| Door Seal | Blue M proprietary fiberglass-reinforced gasket |
| Safety | Interlocked door switch, inert gas purge integrity monitoring |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Blue M Inert Atmosphere Oven |
| Instrument Type | Benchtop/Box-Type Laboratory Oven |
| Max Operating Temperature | 700 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Method | Forced-Air Convection |
| Internal Dimensions (W×D×H) | 20×18×20 to 48×24×36 in (508×457×508 to 1219×610×914 mm) |
| Insulation | 4-inch Mineral Wool |
| Door Seal | High-Performance Fiberglass Gasket |
| Temperature Range | Ambient +15 °C to 316 °C (for inert gas models) |
| Uniformity | ±1% (at ≤316 °C), ±2% (at 700 °C) |
| Resolution | 0.1 °C |
| Power Rating | 7.5 kW |
| Ramp Time to 300 °C | ≤60 min (no-load, exhaust closed) |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | LinkTenn 32 |
| Temperature Range | Ambient to 700 °C |
| Temperature Uniformity | ±0.5 °C |
| External Dimensions | 35 × 33.2 × 51 in to 63 × 38.6 × 75.2 in |
| Internal Chamber Dimensions | 20 × 18 × 20 in to 48 × 24 × 36 in |
| Interior Material | 304 Stainless Steel |
| Heating Method | Forced-Air Convection |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Benchtop/Free-Standing Forced-Air Laboratory Oven |
| Max Temperature | 260°C |
| Temperature Uniformity | ≤ ±3% |
| Control Accuracy | ±1°C |
| Heating Method | Horizontal Forced-Air Convection |
| Internal Dimensions | 300 × 300 × 300 mm to 790 × 710 × 1450 mm |
| Max Power | 11 kW |
| Construction | Stainless Steel Interior, Powder-Coated Steel Exterior |
| Compliance | Designed for GLP-compliant thermal processing environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | LUNAIRE WSS |
| Temperature Range | −70 °C to +180 °C |
| Temperature Uniformity | ±1.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±1.0 °C |
| Ramp Time | Ambient to 180 °C |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Chamber Volume Options | 288 ft³, 512 ft³, 800 ft³ |
| Application Class | Air-Heating Thermal Aging Chamber |
| Compliance Context | Designed for ICH Q1A(R3), USP <1151>, FDA 21 CFR Part 11 (with optional audit trail software), and GLP/GMP environmental validation protocols |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | 146 |
| Instrument Type | High-Temperature Forced-Air Oven |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% of setpoint |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | ±0.1°C |
| Chamber Dimensions (Interior) | 20×18×20 cm to 48×24×36 cm |
| External Dimensions | 40×34×57 cm to 68×40×82 cm |
| Interior Construction | Fully welded 304 stainless steel chamber |
| Insulation | 102 mm (4 in) fiberglass insulation |
| Airflow System | Horizontal forced-air circulation with single-pass and recirculation mode selection |
| Heating Element | Blue M Eterna™ high-reliability nichrome wire heater, ceramic-insulated |
| Door Seal | Dual-blade silicone rubber gasket |
| Access Port | 76 mm (3 in) diameter pass-through port centered on right side |
| Control Mode | Programmable or constant-temperature operation |
| Exhaust | DC-driven multi-blade centrifugal fan with dynamic balancing |
| Compliance | Designed for ASTM D5422, UL 746B, IPC-TM-650 2.6.22, and aging test protocols per IEC 60068-2-2 and MIL-STD-810H |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Blue M 146 Standard Mechanical Convection Oven |
| Instrument Type | Benchtop/General-Purpose Forced-Air Oven |
| Maximum Operating Temperature | 350 °C |
| Temperature Uniformity | ±1% of setpoint (at steady state, full load) |
| Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Heating Method | Horizontal mechanical convection (adjustable single-pass or recirculating airflow) |
| Internal Chamber Dimensions | 20″ × 18″ × 20″ to 48″ × 24″ × 36″ (508 × 457 × 508 mm to 1219 × 610 × 914 mm) |
| Rated Power | 7.5 kW |
| Typical Ramp Time to 350 °C | ≤60 min (dependent on chamber volume and load) |
| Insulation | 4″ (102 mm) fiberglass blanket |
| Construction | 16-gauge (1.5 mm) cold-rolled steel exterior |
| Door Seal | High-temperature silicone gasket with dual compression design |
| Optional Features | 3″ (76 mm) rear-mounted conduit port |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model Series | 166, 246, 326, 366, 606, 966 |
| Temperature Range | Ambient to 316°C |
| Temperature Uniformity | ±1.5–2.0% of setpoint |
| Temperature Stability | ±0.5°C |
| Interior Material | 304 Stainless Steel |
| Insulation | 102 mm (4 in) Fiberglass |
| Heating Method | Forced-air convection |
| External Casing | 14–16 gauge cold-rolled steel |
| Finish | White porcelain enamel coating |
| Door | Dual-wall insulated with manual adjustable air inlet/outlet valves |
| Interior Volumes | 16.0–96.0 ft³ |
| Compliance | Designed for GLP/GMP environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | High-Temperature Inert Atmosphere Drying Oven |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | ±0.1°C |
| Chamber Construction | Fully Welded 304 Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Insulation | 4-inch Mineral Wool |
| Door Seal | Blue M Fiberglass Gasket |
| Purge Gas Compatibility | N₂, Ar, Forming Gas (N₂/H₂), or Other Inert/Non-Flammable Gases |
| Electrical Options | 208–480 VAC, Single- or Three-Phase, 50/60 Hz |
| Internal Volume | 4.2–24.0 cu.ft |
| External Dimensions (W×D×H) | 40×34×57 to 68×40×82 in |
| Internal Dimensions (W×D×H) | 20×18×20 to 48×24×36 in |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Nitrogen Purge Drying Oven |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | ±0.1°C |
| Chamber Construction | Fully welded 304 stainless steel |
| Insulation | 4-inch mineral wool |
| Door Seal | High-integrity fiberglass-reinforced gasket |
| Gas Compatibility | Inert and non-flammable gases (N₂, Ar, forming gas) |
| Purge Flow Rates | 25–600 SCFH (model-dependent) |
| Power Options | 208/240/480 VAC, single- or three-phase, 50/60 Hz |
| Internal Volume | 4.2–24.0 cu.ft |
| External Dimensions (W×D×H) | 40×34×57 to 68×40×82 in |
| Chamber Dimensions (W×D×H) | 20×18×20 to 48×24×36 in |
| Heating Method | Forced-air convection |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model Series | 206 / 256 / 296 (Benchtop), 136 / 336 / 1046 (Floor-Standing) |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% of setpoint |
| Temperature Stability | ±0.5°C |
| Control Resolution | 0.1°C |
| Interior Construction | Full-welded 304 stainless steel chamber |
| Insulation | 4-inch mineral wool |
| Door Seal | Blue M proprietary fiberglass gasket |
| Heating Method | Forced-air convection |
| Gas Purge Compatibility | N₂, Ar, forming gas (N₂/H₂), and other inert/non-flammable gases |
| Typical Purge Flow Rates | 25–600 SCFH (model-dependent) |
| Electrical Options | 208/240/480 VAC, single- or three-phase, 50/60 Hz |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model Variants | 206, 256, 296 (benchtop) |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% of setpoint |
| Temperature Stability | ±0.5°C |
| Control Resolution | ±0.1°C |
| Chamber Construction | Full-welded 304 stainless steel |
| Insulation | 4-inch mineral wool |
| Door Seal | Blue M proprietary fiberglass gasket |
| Heating Method | Forced-air convection |
| Compliance | Designed for ISO/IEC 17025-compliant labs |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | SPX Blue M 146 |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Max Power | 7500 W |
| Heating Method | Forced Air Convection |
| Internal Dimensions | 20×18×20 in to 48×24×36 in (1.6–24 cu.ft) |
| Ramp Time to 300°C | ≤60 min |
| Insulation | 4-inch Mineral Wool |
| Chamber Construction | Full-Welded 304 Stainless Steel |
| Door Seal | Blue M Fiberglass Gasket |
| Safety | Interlocked Purge-Integrity Door Switch |
| Compliance | Designed for ASTM E145, ISO 17025, and GLP-compliant thermal processing environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | STL-05 |
| Type | Stackable Forced-Air Laboratory Oven |
| Max Temperature | 350°C |
| Temperature Uniformity | ±1% of setpoint |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Internal Dimensions | 635 × 508 × 508 mm |
| Internal Volume | 5.8 ft³ (0.164 m³) |
| Max Power | 12.0 kW (at 240/480 VAC, 3Ph, 60 Hz) |
| Heating Method | Horizontal Dual-Boosted Forced-Air Circulation |
| Insulation | 102 mm (4 in) Fiberglass |
| Door Seal | High-Temp Silicone Gasket |
| Heating Elements | Eterna® Alumina-Ceramic |
| Airflow Switch | Standard |
| Compliance | Designed for GLP/GMP environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Synergy Manager |
| Temperature Range | Ambient to 700 °C |
| Temperature Uniformity | ±0.5 °C |
| Interior Dimensions | 20″ × 18″ × 20″ to 48″ × 24″ × 36″ (W×D×H) |
| Exterior Dimensions | 35″ × 33.2″ × 51″ to 63″ × 38.6″ × 75.2″ (W×D×H) |
| Chamber Material | 304 Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Communication Interfaces | Ethernet (TCP/IP), RS-232, RS-485, GPIB-IEEE 488 |
| Software Licensing | USB Dongle (P/N TE1566-1) or Parallel Port Dongle (P/N TE1566-2) |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | 8.5SVO |
| Temperature Range | Ambient +15°C to +200°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Heating Rate | ≤100 min (from ambient to max temperature) |
| Internal Chamber Dimensions (W×H×D) | 597 mm × 698 mm × 597 mm (23.5" × 27.5" × 23.5") |
| Internal Volume | 8.5 ft³ / 240 L |
| Vacuum Capability | Down to 8 Torr (mmHg) |
| Power Supply | 230 V, 3-Phase, 60 Hz |
| Rated Power | 4 kW |
| Standard Shelves | 2 adjustable stainless steel shelves |
| Construction | Dual-wall heavy-gauge steel cabinet with fiberglass insulation |
| Door | Full-view tempered glass window with high-temp silicone gasket |
| Control System | Ethernet-enabled touchscreen PID controller with data logging and profile programming |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Asia |
| Temperature Range | -70°C to 180°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Max Operating Temperature | 200°C (short-term) |
| Internal Chamber Dimensions (W×H×D) | 521 mm × 508 mm × 559 mm |
| Construction | Interior – SUS#304 stainless steel |
| Air Circulation | Forced convection |
| Humidity Capability | 20–95% RH (optional, standard range), 10–95% RH (custom range) |
| System Type | Single-stage or cascade refrigeration (for sub-zero operation) |
| Application Class | High-Temperature Aging Test Chamber, Thermal Cycling Chamber |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Tenney Junior |
| Temperature Range | -68°C to +180°C |
| Uniformity | ±1.0°C |
| Stability | ±1.0°C |
| Deviation | ±1.0°C |
| Ramp Rate (Ambient to 200°C) | 60 min |
| Internal Volume | 1.2–64 ft³ (0.034–1.812 m³) |
| Controller | Watlow F4T with INTUITION™ Process Control |
| Compliance | CE-marked (50/60 Hz), NIST-traceable calibration available, ISO/IEC 17025-compliant calibration services offered |
| Construction | Continuously welded stainless steel interior, fiberglass insulation, hermetic seal |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | SVO |
| Temperature Range | -70°C to +180°C |
| Max Operating Temperature | +150°C (standard), up to +200°C (optional) |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Pressure Range | Ambient (760 Torr) down to 0.169 Torr (equivalent to ~200,000 ft altitude) |
| Internal Chamber Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Heating Method | Immersed electric heater with thermal fluid circulation |
| Vacuum Control | Auto-regulated solenoid valves for precise altitude simulation |
| Controller | Synergy Quattro touchscreen (320×240 color LCD), PID with auto-tuning, dual-channel capability, real-time clock, USB/RS-232/Ethernet (10/100) connectivity |
| Compliance | Designed for ASTM D573, D865, ISO 188, USP <121>, and GLP/GMP-relevant data integrity requirements (audit trail, user access control, electronic signatures via optional software modules) |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | T2 |
| Temperature Range | −70 °C to +180 °C |
| Humidity Range | 20–95 % RH (at dry-bulb 20–85 °C, dew point ≥5 °C) |
| Temperature Uniformity | ±1.0 °C |
| Temperature Stability | ±0.5 °C |
| Temperature Deviation | ±1.0 °C |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Refrigerant | Non-CFC, environmentally compliant |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | TS2 Series Thermal Shock Test Chamber |
| Temperature Range | -70°C to +180°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Ramp Rate | Ambient to +180°C (specification dependent on configuration) |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Dual-Zone Configuration | Hot Zone (+40°C to +200°C), Cold Zone (-73°C to +40°C) |
| Cooling System | Cascade refrigeration with two semi-hermetic compressors |
| Heating | Nickel-chromium wire elements with horizontal airflow |
| Insulation | Ceramic fiber + polyurethane, welded stainless steel interior liner |
| Control System | Synergy Quattro touchscreen controller (320×240 color LCD), PID with auto-tuning, dual-channel capability |
| Compliance | MIL-STD-202G Method 107G Condition F |
| Safety | Dual-limit switches, over/under-temperature protection, OTP TempGard per chamber, door interlock, stainless steel mesh baskets (200 lb capacity per zone) |
| [Brand | Blue M |
|---|---|
| Origin | USA |
| Model | TSJR |
| Temperature Range | -70°C to 180°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Heating Rate | Ambient to 180°C (typical) |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Construction | Continuously welded stainless steel interior |
| Refrigeration System | Dual-stage cascade with two hermetic reciprocating compressors |
| Heating System | Open-coil nickel-chromium wire heaters with ceramic insulation |
| Control System | Synergy Quattro touchscreen controller (320×240 color LCD), PID with auto-tuning, dual-channel capability |
| Compliance | Designed to support MIL-STD-202G thermal shock test protocols] |