Generic
Filter
Showing 2461–2490 of 5744 results
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | JN01 |
| Pricing | Upon Request |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | JOS06 |
| Price Range | USD 7,000–14,000 |
| Instrument Type | Interfacial Rheometer |
| Bearing Type | Mechanical Bearings |
| Minimum Rotational Speed | 10⁻⁴ rpm |
| Frequency Range | 10⁻³–628 rad/s |
| Maximum Rotational Speed | 3000 rpm |
| Maximum Torque | 200 mN·m |
| Torque Resolution | < 100 nN·m |
| Temperature Range | Ambient to 300 °C |
| Temperature Accuracy | ±1 °C (±0.1 °C within 100 °C) |
| Quartz Plate Spacing | 0.05–2 mm |
| Sample Area | Ø25 mm |
| Optical Resolution | 25 pixels/µm |
| Oscillation Frequency Range | 0.01–10 Hz |
| Steady-State Shear Rate Range | 0.001–500 rpm (controlled to ±0.01 rpm at low end) |
| Observation Port | Wide-field transmission & polarized light path |
| CCD System | Color, 3-axis motorized positioning |
| Objective Working Distance | 7 mm |
| Top & Bottom Quartz Plates | Independently motorized, heated via integrated heating plates, temperature monitored by Pt100 sensors |
| Removable Cover & Optional Quartz Plate Sets | Supported for rapid sample exchange and contamination control |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | JPM2012A |
| Price Range | USD 14,000 – 28,000 |
| Dimensions | 690 × 310 × 480 mm |
| Gas Flow Rate | 0–500 mL/min (±0.5% accuracy), Max Pressure: 1.5 MPa |
| Stirring Speed | Up to 5000 rpm (optional) |
| Foam Height Measurement Range | 0–300 mm (video-based) |
| Minimum Sample Volume | 20 mL |
| Conductivity Resolution | 0.01 µS/cm (5-electrode array along foam column) |
| Temperature Control | Ambient to 85 °C (heating rod, optional) |
| Foam Generator Pore Size Options | 1.0–1.6, 10–16, 16–40, 40–100, 100–160, 160–250, 250–500 µm |
| Imaging System | 8× telecentric lens, 1.3 MP digital camera, 25 fps |
| Measured Parameters | gas flow rate, foam volume, liquid drainage volume, foam conductivity, liquid fraction |
| Derived Metrics | foam density, Bikerman index, foam volume stability, liquid phase stability, expansion ratio, foaming capacity, head retention value |
| Power Supply | 220 V AC, 300 W |
| Control | Fully automated PC-based operation, no calibration factor required |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | JPS-700 |
| Instrument Type | Curie-Point Pyrolyzer |
| Maximum Sample Capacity | 40 samples |
| Pyrolysis Temperature Range | Up to 400 °C (typical operating range ≤300 °C) |
| Heating Method | High-Frequency Induction |
| RF Frequency | 600 kHz |
| RF Power Output | 48 W |
| Pyrolysis Duration Control | 1–9,999 s |
| Inter-Analysis Interval | 0.01–999.99 min |
| Carrier Gas Purge | Dual-point dry air purge (pressure ≥0.4 MPa) |
| GC Interface | Universal GC-mount adapter |
| Compliance | Compatible with ASTM D7250, ISO 11348, and USP <621> chromatographic system integration requirements |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JQ-500 |
| Price | USD 23,500 (FOB Jiangsu) |
| Working Chamber Dimensions | 700 × 800 × 900 mm (W×D×H) |
| Temperature Range | 16–40 °C (adjustable, ±0.1 °C control accuracy) |
| Relative Humidity Range | 40–70 % RH (adjustable) |
| Air Velocity | 0.1–0.5 m/s (uniform, laminar flow profile) |
| Temperature Ramp Rate | 0.7–1.0 °C/min |
| Timer Range | 0–9999 h |
| Control System | Programmable LCD touch interface with RS232/RS485 communication port |
| Temperature Sensor | PT100 Class A |
| Humidity Sensor | Capacitive high-stability RH sensor |
| Heating System | Nickel-chromium alloy sheathed heaters |
| Humidification | External stainless steel steam generator |
| Dehumidification | Surface-cooling dew-point condensation via evaporator coil |
| Air Circulation | Multi-blade centrifugal fan with balanced inlet/outlet ducting |
| Insulation | Polyurethane foam (≥100 mm thickness, closed-cell) |
| Outer Casing | Powder-coated carbon steel (A3) |
| Inner Chamber | Mirror-finish SUS304 stainless steel |
| Refrigeration | Hermetic Tecumseh or Copeland compressor |
| Safety Protections | Over-temperature, over-current, ground fault, low-water, high-pressure, and phase-loss detection |
| Power Supply | AC 380 V, 50 Hz, 3-phase 5-wire |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JQ03A |
| Price Range | USD 7,000 – 14,000 |
| Force Range & Accuracy | 0–200 cN, ±0.1% f.s. |
| Elongation Range & Resolution | ≤150 mm, 0.01 mm |
| Gauge Lengths | 10, 20, 25 mm (software-selectable) |
| Clamping | Pneumatic fiber grippers |
| Tensile Speed | 2–100 mm/min |
| Test Modes | Constant-elongation cyclic tensile, constant-load cyclic tensile, stress relaxation, creep, overload & overtravel protection, auto-zero calibration |
| Data Acquisition | PC-controlled real-time acquisition and curve visualization |
| Compliance Standards | GB/T 9997, GB/T 14337, BS EN ISO 5079:1996 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JQ03B |
| Price Range | USD 7,000 – 14,000 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JQ03D |
| Price Range | USD 7,000 – 14,000 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JQ05 |
| Price Range | USD 7,000 – 14,000 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | JQN04C |
| Pricing | Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | JQN04C |
| Price Range | USD 7,000 – 14,000 |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SFY-20 |
| Price | USD 1,890 (FOB Guangdong) |
| Weighing Range | 0–90 g |
| Moisture Measurement Range | 0.01–100% |
| Minimum Readability | 0.001 g |
| Sample Mass | 0.5–90 g |
| Heating Temperature Range | Ambient to 205 °C |
| Heating Method | Variable Hybrid Halogen Heating |
| Auto Temperature Compensation | ±15 °C |
| Moisture Resolution | 0.01% |
| Display Modes | 7 Parameters (Moisture %, Initial/Final Mass, Test Duration, Initial/Final Temp, Endpoint Detection Time) |
| Interface | Dual RS-232 (Printer & PC) |
| Dimensions (W×D×H) | 380 × 205 × 325 mm |
| Power Supply | 220 V ±10%, 50 Hz ±1 Hz |
| Net Weight | 3.7 kg |
| Origin | China |
|---|---|
| Manufacturer Type | Distributor |
| Model | JRQ-1 (Single Port), JRQ-1Z (Six-Port) |
| Temperature Range | Ambient to 200 °C |
| Heating Zone Diameter × Height | 10 cm × 6 cm |
| Rated Power | 0.35 kW (JRQ-1), 2.2 kW (JRQ-1Z) |
| Construction | Cold-Rolled Steel Housing with Epoxy Powder Coating |
| Control | Analog Electronic Temperature Regulator |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | JRWS |
| Price Range | USD 7,000–14,000 |
| Instrument Type | Transient Hot Wire Method |
| Dimensions (L×W×H) | 190 × 95 × 140 mm |
| Accuracy | ±3% |
| Thermal Conductivity Range | 0.01–10 W/m·K |
| Repeatability | ±2% |
| Temperature Control Range | 5–85 °C |
| Temperature Measurement Error | ≤±0.1 °C |
| Resolution | 0.01 °C |
| Thermal Diffusivity Stability Requirement | ≤±1 °C (entire test), ≤±0.5 °C (steady-state phase) |
| Specific Heat Capacity Range | 0.5–5.0 kJ/(kg·K) |
| Specimen Geometry | Ø200 mm × 400 mm cylinder with central Ø40 mm through-hole |
| Water Bath Temp Range | 10–80 °C |
| Heating Rate | 0.5–1.0 °C/min |
| Strain Measurement | Resistance strain gauge, 250 mm gauge length, resolution 0.1 με |
| Power Supply | AC 220 V ±10%, 50–60 Hz, ≤6 kW |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JRY-FC06 / FC08 / FC10 / FC24 |
| Sample Capacity | 6 / 8 / 10 / 24 positions |
| Compatible Vessel Sizes | 50 mL, 125 mL, 250 mL, 500 mL, 1000 mL separatory funnels |
| Rated Voltage | 220 V AC, 50 Hz |
| Motor Power | 90 W / 120 W / 140 W / 160 W |
| Rotation Mode | Unidirectional or Bidirectional (programmable) |
| Speed Range | 0–60 rpm (adjustable) |
| Time Control Range | 0.5–24 h (0.5 h increments) |
| Temperature Control | Real-time ambient temperature monitoring with minimal fluctuation |
| Enclosure Material | Full stainless steel (304) |
| Safety Features | Interlocked transparent polycarbonate guard door, overload protection, earth leakage protection, automatic power cutoff upon door opening |
| Dimensions (W×D×H, mm) | 800×550×700 / 980×550×700 / 1160×550×700 / 1400×550×700 |
| Net Weight | 45 kg / 55 kg / 65 kg / 75 kg |
| Compliance | ISO 9001 certified design, manufacturing, and after-sales service |
| Key | Origin: Hunan, China |
|---|---|
| Model | JRY-XC04 / JRY-XC06 / JRY-XC08 / JRY-XC10 |
| Sample Capacity | 4 / 6 / 8 / 10 positions |
| Bottle Volume Compatibility | 50–2000 mL (including separatory funnels) |
| Speed Range | 0–300 rpm |
| Time Control | 0.5–24 h (adjustable in 0.5-h increments) |
| Rotation Modes | Unidirectional / Bidirectional (forward-reverse-pause cycling) |
| Power | 90–160 W (model-dependent) |
| Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H, mm) | 800×550×700 to 1400×550×700 |
| Weight | 45–75 kg |
| Construction | Full stainless-steel housing with polycarbonate viewing window |
| Safety | Interlocked lid cutoff, overload protection, earth-leakage circuit breaker, recessed spill containment tray |
| Temperature Control | Real-time ambient temperature monitoring (no active heating/cooling) |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JRY-XZ10 |
| Price | Upon Request |
| Sample Capacity | 10 × 50–1000 mL separatory funnels |
| Speed Range | 0–300 rpm (adjustable) |
| Timer Range | 0.5 h to 99 h (0 = continuous operation) |
| Rotation Mode | Unidirectional (programmable forward/reverse cycles optional via JRY-XZ-MF variant) |
| Power Supply | 220 V, 50 Hz |
| Motor Power | 140 W |
| Dimensions (W×D×H) | 1160 × 550 × 700 mm |
| Net Weight | 65 kg |
| Enclosure Material | Full stainless steel (304) |
| Safety Features | Interlocked acrylic viewing shield, leak-proof recessed base, overload protection, earth-leakage circuit breaker, automatic power cutoff upon shield opening |
| Temperature Control | Real-time ambient-temperature stabilization (±1.5 °C typical fluctuation) |
| Compliance | Designed and manufactured per ISO 9001 quality management system |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JRY-Z10 |
| Price | Upon Request |
| Sample Bottle Capacity | 2 L × 10 units |
| Rotation Mode | Unidirectional or Bidirectional (programmable dwell-interval cycling) |
| Speed Range | 0–60 rpm (adjustable) |
| Temperature Control Range | Ambient to 65 °C |
| Temperature Accuracy | ±1 °C |
| Timing Range | 0.5–24 h (0.5-h increments) |
| Dimensions (W×D×H) | 1160 × 550 × 700 mm |
| Net Weight | 75 kg |
| Housing Material | Full 304 Stainless Steel |
| Power Supply | 220 V AC, 50 Hz |
| Motor Power | 140 W |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JS94HM |
| Price Range | USD 7,000–14,000 |
| Zeta Potential Range | ±3000 mV |
| pH Range | 2.0–12.0 (extended operation up to 1.6–13.0) |
| Operating Temperature | 5–35 °C |
| pH Resolution | 0.1 |
| Temperature Resolution | 0.1 °C |
| Accuracy | ≤5% (system error) |
| Repeatability | ≤5% |
| Particle Size Applicability | 0.5–20 µm (aqueous dispersions) |
| Sample Volume per Measurement | 0.5 mL |
| Optical System | Semiconductor-based near-field illumination (blue/green wavelength), 1200× magnification |
| Voltage Control | Adjustable DC/low-frequency AC, polarity reversal time: 0.30–1.20 s (continuously tunable) |
| Data Acquisition | Dual-directional grayscale image capture, real-time thermal compensation via integrated Pt100 probe |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | JS94J2M |
| Price Range | USD 7,000–14,000 |
| Zeta Potential Range | ±3000 mV |
| pH Range | 2.0–12.0 (extended operation up to 1.6–13.0) |
| Operating Temperature | 5–35 °C |
| pH Resolution | 0.1 |
| Temperature Resolution | 0.1 °C |
| Accuracy | ≤5% |
| Repeatability | ≤5% |
| Particle Size Range | 0.1–10 µm |
| Solvent Compatibility | Aqueous and non-aqueous dispersions |
| Optical System | Semiconductor-based blue/green LED illumination (low-power, <100 µW), 1200× digital magnification |
| Electrophoretic Cell | Integrated Ag/Pt/Ti electrodes in 0.5 cm-thick borosilicate glass cuvette |
| Voltage Control | Adjustable DC/low-frequency AC bias, polarity reversal time: 0.30–1.20 s adjustable |
| Sampling Time | 3–10 s per measurement |
| Data Acquisition | Dual-directional grayscale image capture (4 frames), real-time temperature compensation |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JS94JM |
| Price Range | USD 7,000–14,000 |
| Zeta Potential Range | ±3000 mV |
| pH Operating Range | 2.0–12.0 (extended range: 1.6–13.0, resolution: 0.1) |
| Temperature Operating Range | 5–35 °C (resolution: 0.1 °C) |
| Accuracy | ≤5% |
| Repeatability | ≤5% |
| Particle Size Applicability | 0.1–10 µm (aqueous dispersions) |
| Sample Volume per Measurement | 0.5 mL |
| Optical System | Semiconductor-based near-field illumination (blue/green wavelengths), magnification ≥1200× |
| Voltage Polarity Switching Time | 0.30–1.20 s (adjustable) |
| Sampling Duration | 3–10 s |
| Power Supply | 220 V AC, 50 Hz, 150 W |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | JS94K2M |
| Price Range | USD 7,000–14,000 |
| Zeta Potential Range | ±3000 mV |
| pH Operating Range | 2.0–12.0 (extended range 1.6–13.0, resolution 0.1) |
| Temperature Operating Range | 5–35 °C (resolution 0.1 °C) |
| Accuracy | ≤5% |
| Repeatability | ≤5% |
| Sample Volume per Measurement | 0.5 mL |
| Optical Magnification | Up to 1200× |
| Particle Size Range | 0.2–50 µm (aqueous & non-aqueous dispersions) |
| Voltage Polarity Switching Time | Adjustable from 0.30–1.20 s |
| Power Supply | 220 V, 50 Hz, 150 W |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | JS94KM |
| Price Range | USD 7,000–14,000 |
| Zeta Potential Range | ±3000 mV |
| pH Range | 2.0–12.0 (extended range: 1.6–13.0) |
| Operating Temperature | 5–35 °C |
| pH Resolution | 0.1 |
| Temperature Resolution | 0.1 °C |
| Accuracy | ≤5% |
| Repeatability | ≤5% |
| Particle Size Range | 0.2–50 µm (aqueous dispersions) |
| Optical Magnification | Up to 1200× |
| Voltage Polarity Switching Time | 0.30–1.20 s (adjustable) |
| Sampling Time | 3–10 s |
| Power Supply | 220 V, 50 Hz |
| Power Consumption | 150 W |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JSF08M |
| Pricing | Available Upon Request |
| Origin | Sichuan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JTC-1 |
| Pricing | Upon Request |
| Output Voltage Range | 0–120 V AC (50 Hz), Continuously Adjustable |
| Output Current | ≥100 mA |
| Stimulation Modes | Single Pulse, Continuous Train, Externally Triggered Programmable Mode |
| Stimulation Duration | 0.2, 0.3, 0.4, 0.5, 0.6 s |
| Inter-Stimulus Interval (ISI) | Single Pulse, 1, 2, 5, 10 s |
| Trigger Sources | Internal Clock or External TTL-Compatible Signal (5–15 V) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JTH |
| Pricing | Available Upon Request |
| Key Features | Pressure Swing Adsorption (PSA) Technology |
|---|---|
| Output Flow | 30 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −45 °C |
| Power Consumption | 3200 W |
| Input Voltage | 220 V / 50 Hz or 380 V |
| Dimensions | 500 × 330 × 710 mm (AYAN-30L variant) |
| Compliance | CE-marked design principles, compatible with ISO 8573-1 Class 2 compressed air feed requirements |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JTX |
| Pricing | Available Upon Request |
| Brush Dimensions | 38 × 90 mm |
| Brush Mass (incl. holder) | 450 ± 2 g |
| Stroke Length | 300 mm |
| Reciprocating Frequency | 37 ± 1 cycles/min |
| Counter | 4-digit digital display |
| Test Panel Size | 430 × 150 × 5 mm |
| Motor Power | 90 W |
| Power Supply | 380 V, 50 Hz (220 V optional) |
| Overall Dimensions (L×W×H) | 600 × 430 × 450 mm |
| Net Weight | 44 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic |
| Model | JTX-II |
| Pricing | Upon Request |
| Brush Dimensions | 38 × 90 mm base with 60 evenly spaced Ø3 mm holes for hog bristles, bristle length 19 mm |
| Brush Mass (incl. holder) | 450 ± 2 g |
| Liquid Drip Rate | ~0.04 g/s |
| Stroke Length | 300 mm |
| Brushing Frequency | 37 ± 1 cycles/min |
| Counter Display | 5-digit LED |
| Maximum Count | 99,999 cycles |
| Test Panel Size | 430 × 150 × 3 mm |
| Motor Power | 25 W |
| Power Supply | 220 V, 50 Hz |
| Overall Dimensions | 570 × 420 × 300 mm |
| Net Weight | 32 kg |
| Key | Load Capacity: 10 kN (single-range) |
|---|---|
| Force Accuracy | ±1% of reading (0.2–10 kN) |
| Displacement Resolution | 0.01 mm |
| Crosshead Speed Range | 0.01–500 mm/min (infinitely variable) |
| Tensile Test Space | 600 mm |
| Compression Test Space | 700 mm |
| Test Width | 360 mm |
| Power Supply | 750 W, 220 V, 50 Hz |
| Operating Environment | 10–35 °C, 20–80% RH |
| Dimensions (W×D×H) | 770 × 570 × 1800 mm |
| Weight | >265 kg |
| Compliance | GB/T 17657, GB/T 5849, GB/T 1936.2, GB/T 1937, GB/T 1941, ISO 16978, ASTM D1037, EN 310, EN 319, EN 322 |