Q-LAB
Filter
Showing 1–30 of 281 results
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | AIM Box |
| Compliance | ASTM G201, GM 2617M/3619M/7454M/7455M/9538P, Ford DVM 0020, GMW 3417 |
| Light Source | Natural Sunlight with Automotive Glass Filtering |
| Tracking System | Dual-Axis Solar Tracker |
| Temperature Control | Blackboard Thermometer + Active Air-Cooling Fan |
| Sample Capacity | Full-size automotive interior components (dashboards, seats, steering wheels) |
| Spectral Filtering | OEM-grade laminated automotive glass (windshield or side-glass variants per test standard) |
| Operating Environment | Outdoor field exposure site (e.g., Arizona) |
| Calibration & Traceability | ISO/IEC 17025-accredited testing methodology |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | CCT-600 |
| Chamber Capacity | 640 L |
| Cycle Modes | Salt Spray, Dry, 100% RH Humidity, and Hold (Static) |
| Compliance | ASTM B117, ISO 9227, ASTM G85 Annex A5 (Prohesion), SAE J2334, GMW 14872, Ford APGE, VW PV1210, Renault D17 2028 |
| Water Requirement | Deionized or purified water only |
| Internal Solution Reservoir | 120 L with level sensor and saltwater filter |
| Controller | Integrated microprocessor-based system with self-diagnostic functions, service alerts, and safety shutdown |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CCT1100 |
| Chamber Type | Cyclic Corrosion Test Chamber |
| Core Functions | Salt Spray / Dry / High-Humidity (100% RH) Cycling |
| Compliance | ASTM B117, ASTM G85 Annex A5 (Prohesion), ISO 9227, ISO 11997, SAE J2334, GMW 14872, Ford CETP 00.00-L-467, VW PV1210 |
| Control System | Integrated Q-FOG Microprocessor Controller with Real-Time Display and Programmable Cycle Sequencing |
| Chamber Volume | 1100 L (Standard Configuration) |
| Construction | Fiberglass-Reinforced Polymer (FRP) Cabinet with Corrosion-Resistant Interior |
| Humidity Generation | Electric Steam Generator |
| Salt Fog Delivery | Compressed-Air-Driven Atomization via Bubble Tower (except Prohesion mode) |
| Temperature Control | Dual-Heater System (Chamber + Air Stream) |
| Viewing Window | Polycarbonate Side Window with Sealed Gasket |
| Data Logging | Onboard Event Timestamping (Start/Stop/Phase Transition), Optional USB Export |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-LAB CCT1100 |
| Chamber Volume | 1103 L |
| Sample Capacity | 160 panels (75 mm × 150 mm) |
| Operating Modes | Salt Spray / Prohesion / 100% RH Humidity / Dry / Static |
| Temperature Range | Ambient to 50 °C (typical operational range per ASTM B117, ISO 9227, SAE J2334) |
| Salt Solution Delivery | Precision-controlled via variable-speed peristaltic pump and regulated air pressure |
| Water Requirement | Deionized or purified water (≥1 MΩ·cm resistivity recommended) |
| Compliance | Designed to meet ASTM G85 Annexes A1–A5, ISO 11997-1/2, VDA 621-415, GMW 14872, Ford CETP 00.00-L-467, SAE J2334 |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CCT600 |
| Chamber Capacity | 640 L |
| Cycle Modes | Salt Spray / Dry / 100% RH / Static |
| Compliance | ASTM B117, ISO 9227, ISO 16701, GMW 14872, SAE J2334, VW PV1210, Ford CETP, Renault D17 2025, Volvo VCS 1027,149, GB/T 10125 |
| Humidity Control | Up to 100% RH with precision air pre-conditioning (CCT-series) |
| Temperature Range | Ambient +10°C to 50°C (operational during spray/dry/RH phases) |
| Salt Solution Delivery | Variable-speed peristaltic pump with independent control of solution flow rate and atomization distance via regulated compressed air |
| Controller | Q-FOG Intelligent Touchscreen Controller with built-in diagnostics, service scheduling, safety shutdown, and audit-trail-ready event logging |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-LAB CCT600 |
| Chamber Capacity | 640 L |
| Sample Capacity | 160 panels (75 mm × 150 mm) |
| Operating Environments | Salt Fog / Dry / 100% RH Humidity / Ambient Hold |
| Temperature Range | Ambient to 50 °C (typical operational range for cyclic corrosion testing) |
| Salt Solution Delivery | Precision-controlled via variable-speed peristaltic pump and regulated air pressure |
| Internal Solution Reservoir | 120 L with level sensor and filtration |
| Compliance | Designed to support ASTM B117, ISO 9227, ASTM G85 Annexes (A1–A5), SAE J2334, GMW 14872, Ford CETP 00.00-L-467, VDA 621-415, and other internationally recognized cyclic corrosion standards |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Manufacturer Status | Original Equipment Manufacturer (OEM) |
| Product Type | Imported Instrument Calibration Service |
| Service Model | Irradiance Calibration |
| Service Category | Instrument Certification and Calibration |
| Regulatory Compliance | ISO/IEC 17025 Accredited (A2LA & UKAS) |
| Applicable Standards | ASTM G177, ASTM G137, ISO 4892-2, ISO 4892-3 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | CR-10 |
| Calibration Traceability | NIST |
| Accreditation | ISO/IEC 17025 (A2LA & UKAS) |
| Recommended Recalibration Interval | Annually |
| Compatible With | QUV Accelerated Weathering Testers (UV-A and UV-B lamp configurations) |
| Excludes | QUV Basic, QUV/cw (requires CR-10/cw), Q-SUN (requires CR-20 series) |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CRH 1100 |
| Capacity | 1100 L (internal chamber volume) |
| Humidity Control Range | 0–100% RH (programmable, pulse-fogging assisted) |
| Temperature Range | Ambient +10°C to 60°C (typical operational range per ASTM G85 Annexes and ISO 16701) |
| Spray Function | Adjustable flow rate, user-defined on/off timing, non-atomized liquid delivery |
| Compliance | Fully supports GMW 14872, SAE J2334, ISO 16701, ASTM G85 Annexes 1/2/3/5, ISO 9227, IEC 60068-2-52, MIL-STD-810G, and other cyclic corrosion standards requiring precise RH control |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | CRH600-HSC / CRH1100-HSC |
| Salt Fog Deposition Rate | Adjustable via precision peristaltic pump and air pressure regulation |
| Temperature Range | 10°C to 70°C (operational), with rapid transition capability |
| Relative Humidity Control | 10% to 95% RH, ±2% RH accuracy (at 25°C) |
| Chamber Capacity | 640 L (CRH600-HSC) or 1103 L (CRH1100-HSC) |
| Spray Nozzle System | Self-cleaning, modular, DI-water compatible |
| Internal Solution Reservoir | 120 L, with level sensor and particulate filtration |
| Compliance | Designed to meet GMW 14872, SAE J2334, ISO 11997, ASTM B117 (modified), VW PV1210, Ford CETP, Renault D17 2025, GB/T 24135–2009, and other automotive & industrial cyclic corrosion standards |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CRH1100-HSC |
| Spray Mode | Continuous/Cyclic Spray |
| Temperature Range | 20–70 °C |
| Chamber Volume | 1103 L |
| Humidity Control | Full-Variable RH via Air Preconditioning System |
| Spray Function | Adjustable High-Flow Liquid Shower Module |
| Nozzle Maintenance | Automatic Self-Cleaning Mechanism |
| Internal Solution Reservoir | 120 L with Filtration & Low-Level Alarm |
| Compliance | GMW 14872, SAE J2334, ISO 11997, VW PV1210, Ford CETP, Renault D17 2025, JASO M609, GB/T 24135, Prohesion™ Protocol |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CRH600 |
| Chamber Volume | 640 L |
| Salt Spray Deposition Rate | Adjustable per ASTM B117 / ISO 9227 |
| Temperature Range | 10–70 °C (operational), with RH control from 10% to 95% RH |
| Humidity Control Method | Pre-conditioned air + ultrasonic misting + forced-air circulation |
| Compliance | GMW 14872, SAE J2334, Ford CETP, ISO 16701, VW PV1210, Renault D17 2025, Volvo VCS 1027, Chrysler MSFC-100, GB/T 10125, ISO 9227, ASTM G85 Annex A5 (Prohesion) |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Category | Imported |
| Model | Q-Lab Testing Services |
| Pricing | Available Upon Request |
| Brand | Q-LAB |
|---|---|
| Origin | China (Hubei) |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PWC |
| Quotation | Available Upon Request |
| Xenon Lamp Power | Configurable per IEC 60068-2-5 & ASTM G155 |
| Temperature Range | –10°C to +80°C (operational, ±0.5°C uniformity) |
| Humidity Range | 10% to 95% RH (±3% RH accuracy) |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT |
| Spray Mode | Continuous Spray |
| Spray Rate | 1–5 L/h per 180 cm² |
| Nozzle Pressure | 0.7–1 kg/cm² |
| De-misting Method | Air-pressurized Exhaust |
| Temperature Range | 20–60 °C |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT |
| Compliance | ASTM B117, ASTM G85, ISO 9227, BS 3900 F4/F9, DIN 50021 |
| Temperature Range | Ambient to 50°C (operational control stability ±2°C) |
| Salt Solution Delivery | Pneumatic air-assisted atomization with adjustable spray rate (typically 1.0–2.0 mL/80 cm²/h per ASTM B117) |
| Humidity Control | 100% RH capability (CCT-specific) |
| Chamber Volume | Standard 600 L (custom sizes available) |
| Construction | Fiberglass-reinforced polymer (FRP) chamber body with corrosion-resistant stainless steel hardware |
| Control System | 7-inch full-color touchscreen interface with programmable multi-step cycling logic |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT |
| Chamber Volume Options | 600 L / 1100 L |
| Temperature Range | Ambient to 50°C (typical operational range for cyclic corrosion testing) |
| Salt Solution Delivery | Pneumatic atomization via saturated compressed air and adjustable peristaltic pump |
| Humidity Control | 100% RH via steam generator (CCT-specific) |
| Dry Cycle | Forced-air convection heating with dual heater control (chamber + air heater) |
| Compliance | ASTM B117, ISO 9227, ASTM G85 Annex A1–A5 (Prohesion), SAE J2334, GMW 14872, Ford CETP 00.00-L-467, VDA 621-415, DIN 50017, JIS Z2371 |
| Software Interface | Q-FOG Touchscreen Controller with programmable multi-step cyclic profiles, real-time monitoring, data logging, and audit-ready event history |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT |
| Compliance | ASTM B117, ASTM G85 Annex A5 (Prohesion), ISO 9227, SAE J2334, GMW 14872, Ford CETP 00.00-L-467, Renault D17 2028 |
| Chamber Capacity | 640 L (CCT-600) / 1103 L (CCT-1100) |
| Temperature Range | 10–70 °C (operational range under cyclic conditions) |
| Salt Solution Delivery | Precision-controlled via variable-speed peristaltic pump and regulated compressed air |
| Humidity Control | 100% RH capability (CCT only) |
| Sample Capacity | 160 specimens (75 mm × 150 mm) for CCT-600 |
| Internal Reservoir | 120 L deionized water tank with integrated salt solution filter and low-level alarm |
| Cycle Flexibility | Four-phase cycling — Salt Fog, Dry-off, 100% RH (CCT only), and Ambient Rest |
| Controller | Embedded microprocessor with self-diagnostic firmware, audit-trail-capable logging (FDA 21 CFR Part 11 compliant configuration available), and intuitive touchscreen interface |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | CCT |
| Compliance | ASTM B117, ISO 9227, ISO 11997, ASTM G85 (Annex A1–A5), SAE J2334, GMW 14872, VDA 621-415, JIS Z 2371, DIN 50021, BS EN ISO 7253 |
| Humidity Range | 100% RH (CCT-specific) |
| Temperature Control | Spray, Dry, and Humidify Modes with Independent Heating Systems |
| Chamber Capacity | Standard configurations available (e.g., CCT-1100, CCT-2100) |
| Control System | Touchscreen Programmable Controller with Multi-Step Cycling Capability |
| Construction | Fiberglass-Reinforced Polymer (FRP) Cabinet, Corrosion-Resistant Interior |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | CCT Series |
| Type | Cyclic Corrosion Test Chamber |
| Compliance | ASTM B117, ISO 9227, ASTM G85 (Annexes A1–A5), SAE J2334, GMW 14872, Ford CETP 00.00-L-467, VW PV1210 |
| Temperature Range | 10–70 °C (operational range per test method) |
| Humidity Control | 100% RH (CCT only) |
| Salt Fog Deposition Rate | 1.0–2.0 mL/80 cm²/h (adjustable per ASTM B117) |
| Chamber Volume | Available in multiple standard sizes (e.g., CCT-1100: 1100 L) |
| Controller | Q-FOG Touchscreen Microprocessor with Multi-Step Program Logic, Audit Trail Logging, and User Access Levels |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT SSP CRH |
| Temperature Range | 20–60 °C (spray/soak), 20–70 °C (dry), 20–60 °C (RH/humidity) |
| Chamber Capacity | 640 L (CCT-600/SSP-600/CRH-600) or 1103 L (CCT-1100/SSP-1100/CRH-1100) |
| Internal Salt Solution Reservoir | 120 L |
| Sample Rack Capacity | 160 pcs (75 mm × 150 mm) for 600-series |
| Relative Humidity Control | 95–100% RH (CCT), fully adjustable 10–95% RH (CRH) |
| Air Pressure Requirement | 3–10 bar |
| Water Purity | <8 ppm TDS, resistivity >50 kΩ·cm |
| Power Supply | 208–230 V, 50/60 Hz, up to 38 A |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CCT-1100 |
| Salt Spray Deposition Rate | 0.5–3 mL/h·80 cm² |
| Temperature Range | Ambient to 70 °C |
| Chamber Capacity | 1103 L |
| Sample Capacity | 160 panels (75 mm × 150 mm) |
| Humidity Control | Up to 100% RH |
| Cycle Modes | Salt Spray, Dry, High Humidity (100% RH), and Hold/Rest |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT-600 |
| Chamber Types | Salt Spray, Dry-off, 100% RH Humidity (CCT only), and Ambient Hold |
| Control System | Microprocessor-based Programmable Controller with Self-Diagnostic Functions |
| Internal Solution Reservoir | 120 L with Integrated Saltwater Filter and Low-Level Alarm |
| 雾 Dispersion | Variable-Speed Peristaltic Pump + Adjustable Air Pressure Regulator for Independent Control of Salt Spray Deposition Rate and Pattern |
| Temperature Transition Speed | Rapid due to In-Chamber Heaters and High-Capacity Cooling/Drying Blower |
| Water Requirement | Deionized or Distilled Water Only |
| Compliance Support | Designed to meet ASTM B117, ASTM G85 Annexes (A1–A5), ISO 9227, ISO 11997, VDA 621-415, GMW 14872, Ford CETP 00.00-L-467, SAE J2334, and other cyclic corrosion test standards |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT-600 |
| Salt Spray Deposition Rate | 0.5–3.0 mL/(h·80 cm²) |
| Temperature Range | Ambient to 70 °C |
| Chamber Capacity | 640 L |
| Sample Capacity | 160 panels (75 mm × 150 mm) |
| Humidity Control | Up to 100 % RH |
| Compliance | ASTM B117, ASTM G85 (Annex A1–A5), ISO 9227, DIN 50021, VDA 621-415, GMW 14872, Ford CETP 00.00-L-467, SAE J2334 |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CCT1100 |
| Chamber Volume | 1100 L |
| Cycle Types | Salt Spray / High-Humidity (100% RH) / Dry |
| Compliance | ASTM B117, ISO 9227, ASTM G85 Annex A5 (Prohesion), SAE J2334, GMW 14872, Ford CETP 00.00-L-467, Renault D17 2028 |
| Control System | Touchscreen-based Q-FOG Controller with Audit Trail & User Access Levels |
| Data Logging | Internal memory + USB export |
| Construction | Fiberglass-reinforced polymer (FRP) chamber body, corrosion-resistant stainless steel hardware |
| Humidity Range | 100% RH (CCT only) |
| Temperature Range | Ambient to 50°C (typical operational range for cyclic corrosion testing) |
| Salt Fog Deposition Rate | Adjustable per ASTM B117 (typically 1.0–2.0 mL/80 cm²/h) |
| Air Supply | Oil-free compressed air (4–6 bar) |
| Power Requirement | 208–240 VAC, 50/60 Hz, 30 A |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT1100 |
| Spray Mode | Continuous Atomization |
| Spray Rate | 1–5 L/h per 180 cm² |
| Nozzle Pressure | 0.7–1 kg/cm² |
| Fog Removal Method | Air-Pressure-Assisted Exhaust |
| Salt Fog Deposition Rate | 1–2 mL per 80 cm²·h |
| Temperature Range | 10–80 °C |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT1100 |
| Chamber Capacity | 1103 L |
| Cycle Capabilities | Salt Spray, Dry, 100% RH Humidity, and Hold |
| Control System | Integrated Microprocessor-Based Q-FOG Controller with Self-Diagnostic Functions |
| Solution Delivery | Precision-Controlled Peristaltic Pump + Adjustable Air Pressure Regulator |
| Water Requirement | Deionized or Distilled Water (Resistivity >50 kΩ·cm, Particles <200 µm) |
| Power Supply | 220–240 V, 50–60 Hz, Single Phase, Max 4.2 kW |
| Exhaust Duct | 4" (102 mm) ID Required |
| Operating Ambient Temperature | 19–27 °C |
| Internal Reservoir | 120 L with Saltwater Filter & Low-Level Alarm |
| Sample Capacity | 240 test panels (75 mm × 150 mm) or custom 3D fixtures via 20 mm diameter hanging rods |
| Compliance | Designed to support ASTM B117, ISO 9227, ASTM G85 Annex A5 (Prohesion), SAE J2334, GMW 14872, Ford CETP 00.00-L-467, and other automotive cyclic corrosion standards |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | CCT1100 |
| Salt Spray Deposition Rate | 1.0–2.0 mL/80 cm²/h (ASTM B117 compliant range) |
| Temperature Range | 10–50 °C (Salt Fog), 25–70 °C (Dry), 25–60 °C (Humid) |
| Humidity Control | 95–100% RH (Condensation Humidity Mode) |
| Chamber Volume | 1100 L |
| Power Supply | 220–240 V, 50/60 Hz, Single Phase, Max 4.2 kW |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT600 |
| Salt Spray Deposition Rate | 0.5–3 mL/h·80 cm² |
| Temperature Range | Ambient to 70 °C |
| Chamber Capacity | 640 L |
| Cycle Modes | Neutral Salt Spray (NSS), Prohesion™, and 100% RH Humidity Conditioning |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-FOG CCT600 |
| Chamber Capacity | 640 L |
| Cycle Modes | Salt Spray / Dry / 100% RH Humidity / Ambient Hold |
| Compliance | ASTM B117, ISO 9227, ISO 11997-1/2, GMW 14872, SAE J2334, VW PV1210, Ford CETP, Renault D17 2025, GB/T 10587, GB/T 2423.17/18/33 |