Q-LAB
Filter
Showing 61–90 of 281 results
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG SSP-600, Q-FOG SSP-1100, Q-FOG CCT-600, Q-FOG CCT-1100 |
| Temperature Range | 20–70 °C (spray/dry), 20–60 °C (RH/humidity) |
| Chamber Capacity | 640 L (SSP/CCT-600), 1103 L (SSP/CCT-1100) |
| Salt Solution Reservoir | 120 L |
| Sample Capacity | 160 panels (75 × 150 mm) for 600-series |
| Spray Rate | 1–2 mL/80 cm²·hr |
| Air Pressure | 0.7–1.0 kg/cm² (≈70–100 kPa) |
| Humidity Control | 95–100% RH (CCT models only) |
| Power Supply | 208–230 V, 50/60 Hz, 13–38 A |
| Weight (dry) | 224–378 kg |
| Water Purity Requirement | <8 ppm TDS, >50 kΩ·cm resistivity |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG SSP-600 |
| Compliance | ASTM B117, ASTM G85 (Annex A2–A5), ISO 9227, BS 3900 F4/F9, DIN 50021 |
| Chamber Capacity | 160 × 75 mm × 150 mm test panels |
| Internal Solution Reservoir | 120 L |
| Operating Modes | Salt Spray, Dry-off, Humidity Hold (CCT models only), Rest |
| Control System | Microprocessor-based programmable controller with self-diagnostic functions |
| Required Supply | Deionized or purified water (≥1 MΩ·cm resistivity) |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG SSP-600 |
| Salt Spray Deposition Rate | 0.5–3.0 mL/(h·80 cm²) |
| Temperature Range | Ambient to 70°C |
| Compliance | ASTM B117, ASTM G85 (Prohesion), ISO 9227, BS 3900 F4/F9, DIN 50021 |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG SSP1100 |
| Salt Spray Deposition Rate | 0.5–3 mL/h·80 cm² |
| Temperature Range | Ambient to 70 °C |
| Chamber Capacity | 1103 L |
| Compliance Standards | ASTM B117, ASTM G85 (Prohesion), ISO 9227, BS 3900 F4/F9, DIN 50021 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-FOG SSP1100 |
| Chamber Capacity | 1103 L |
| Salt Fog Deposition Rate | Adjustable per ASTM B117 & ISO 9227 |
| Temperature Range | 15–50 °C (operational range during salt fog, dry, and humidity cycles) |
| Sample Capacity | Up to 240 standard test panels |
| Internal Solution Reservoir | 120 L |
| Compliance | ASTM B117, ASTM G85 (Annex A2–A5), ISO 9227, BS EN 3900 F4/F9, DIN 50021, SAE J2334, GMW 14872, Ford CETP 00.00-L-467 |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | SSP600 |
| Chamber Capacity | 640 L |
| Sample Capacity | 160 × 75 mm × 150 mm test panels |
| Salt Solution Delivery | Variable-speed peristaltic pump |
| Temperature Range | Ambient to 50 °C (operational range per ASTM B117 & ISO 9227) |
| Corrosion-Resistant Construction | Fiberglass-reinforced polymer (FRP) interior, no internal steel structure |
| Compliance | ASTM B117, ASTM G85 (Annex A5 Prohesion), ISO 9227, DIN 50021, BS 3900 F4/F9, GB/T 10125 |
| Humidity Control | Not supported (SSP series lacks 100% RH conditioning) |
| Internal Reservoir | 120 L deionized water-compatible tank with level sensor and inline salt solution filter |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-FOG SSP600 |
| Spray Mode | Continuous Spray |
| Spray Rate | 1–5 L/h per 180 cm² |
| Nozzle Pressure | 0.7–1 kg/cm² |
| Fog Removal Method | Air-Compression Exhaust |
| Salt Fog Deposition Rate | 1–2 mL per 80 cm²·h |
| Temperature Range | 20–60 °C |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-FOG SSP600 |
| Chamber Capacity | 640 L |
| Test Modes | ASTM B117 (Continuous Salt Fog), Prohesion™, and Custom Cyclic Corrosion Testing |
| Salt Solution Delivery | Precision-controlled via variable-speed peristaltic pump and regulated compressed air |
| Temperature Range | 25–50 °C (operational range during salt fog cycle) |
| Salt Deposit Rate | Adjustable and compliant with ASTM B117 (1.0–2.0 mL/80 cm²/h) |
| Internal Reservoir | 120 L with integrated salt solution filter and low-level alarm |
| Sample Capacity | 160 test panels (75 mm × 150 mm) |
| Compliance | ASTM B117, ASTM G85 (Annex A1–A5), ISO 9227, DIN 50021, BS EN ISO 9227, BS 3900-F4/F9 |
| Controller | Embedded microprocessor with full self-diagnostic suite, real-time status display, service alerts, and safety shutdown |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Q-Panel |
| Pricing | Available Upon Request |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Q-LAB B02 |
| Xenon Lamp Power | 1800 W (air-cooled) |
| Irradiance Range | ≤1800 W/m² |
| Light Exposure Duration | 1–9999 h (continuously adjustable) |
| Humidity Control | Integrated RH system (range per ISO 105-B02 and AATCC TM16 specifications) |
| Sample Capacity | 31 AATCC specimens (46 × 264 mm each), total exposure area: 1882 cm² |
| Lamp Life | ~1500 hours |
| Calibration Compliance | NIST-traceable, ISO/IEC 17025 accredited (A2LA Cert. #2382-01, #2383-02, #2383-03) |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-SUN B02 |
| Radiation Intensity | ≤1800 W/m² |
| Light Exposure Duration | 1–9999 h (continuously adjustable) |
| Humidity Control | Standard |
| Water Spray Option | Available |
| Lamp Type | Air-Cooled 1800 W Xenon Arc Lamp |
| Lamp Life | ~1500 h |
| Sample Capacity | 31 AATCC pre-cut specimens (1882 cm² total exposure area) |
| Compliance | ISO 105-B02, ISO 105-B04, AATCC TM16 (Options 2 & 3), AATCC TM169, M&S C9/C9A |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Q-LAB Q-SUN B02 |
| Xenon Lamp Power | 1800 W |
| Irradiance | 42 W/m² (broadband, 300–800 nm) |
| Light Exposure Duration | 1500 h (lamp life at nominal output) |
| Humidity Range | 35–65 % RH |
| Operating Temperature Range | 35–65 °C (chamber air) |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN B02 |
| Xenon Lamp Power | 1800 W (air-cooled) |
| Lamp Life | ~1500 hours |
| Filter Configuration | Dual-filter system with outer borosilicate tube and inner 7-piece filter sets (Window-B/SL per AATCC TM16 |
| Compliance | Designed to meet ISO 105-B02, AATCC TM16, and related textile colorfastness standards |
| Cooling Method | Air-cooled lamp assembly |
| Lamp Replacement | Top-access, single connector + two set screws |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN B02-S |
| Light Source | 1800 W Air-Cooled Xenon Arc Lamp |
| Spectral Filtering | ISO Window-IR / AATCC Window-B/SL Dual-Filter System |
| Irradiance Control | SOLAR EYE® Sensor at 340 nm, 420 nm, or TUV |
| Humidity Control | Programmable Relative Humidity (RH) with Purified Water Requirement |
| Optional Feature | Purified Water Spray (Top-Mounted Nozzle, Light/Dark Cycle Configurable) |
| Sample Orientation | Vertical Mounting |
| Black Panel Temperature Control | Yes |
| Chamber Air Temperature Control | Yes |
| Compliance | ISO 105-B02, ISO 105-B04, AATCC TM16, AATCC TM169 |
| Lamp Life | ~1500 hours |
| Connectivity | Built-in Ethernet for Data Logging |
| Calibration | PATENTED AUTOCAL® System |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN B02-S |
| Xenon Lamp Power | 1800 W |
| Compliance | ISO 105-B02, ISO 105-B04, AATCC TM 16 (Option 2 & 3), AATCC TM 169, M&S C9/C9A |
| Sample Capacity | 31 AATCC pre-cut specimens (1882 cm² total exposure area) |
| Lamp Type | Air-cooled xenon arc lamp |
| Lamp Life | ~1500 hours |
| Temperature Control | Blackboard temperature (35–103 °C), chamber air temperature |
| Humidity Control | Relative humidity (RH) with optional water spray |
| Filter System | Dual-filter assembly (outer borosilicate tube + inner 7-element filter set) for Window-IR (ISO/M&S) or Window-B/SL (AATCC) spectral profiles |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Lamp Type | Xenon Arc Lamp |
| Rated Power | 1800 W |
| Cooling Method | Air-Cooled |
| Rated Lifetime | 1500 hours |
| Compatible Models | Q-SUN Xe-1, Q-SUN Xe-3 |
| Spectral Range | Full-spectrum (290–800 nm), UV-Visible-NIR |
| Mounting Configuration | External Irradiation Source |
| Filter Dependency | Requires Borosilicate Outer Sleeve + Multi-element Inner Filter Assembly (7-piece per set) |
| Compliance | ASTM G155, ISO 11341, ISO 4892-2, AATCC TM16, SAE J2527 |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model Series | Q-SUN Xe-1, Xe-2, Xe-3 |
| Xenon Lamp Power | 1800 W |
| Irradiance (at 340 nm) | up to 1.30 W/m²/nm |
| Typical Broadband Irradiance | 42 W/m² (with Window-SF5/IR/B04 filters) |
| Lamp Life | up to 3000 h (X-1800+/X-1850+ lamps) |
| Black Panel Temperature Range | 25–120 °C (model-dependent) |
| Relative Humidity Control | 20–95% RH (Xe-2 & Xe-3 only) |
| Water Purity Requirement | >5 MΩ·cm, <0.2 µS/cm, <0.1 ppm TDS (for spray/humidification) |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1 / Xe-2 / Xe-3 |
| Xenon Lamp Power | 1800 W per lamp |
| Lamp Cooling | Air-cooled |
| Filter Options | Daylight, Window Glass, Extended UV |
| Sample Capacity | Xe-1: 251 mm × 457 mm (flat) |
| Xe-2 | 31 × 46 mm × 122 mm specimens on rotating drum |
| Xe-3 | 451 mm × 718 mm (flat) |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 105-B02, GB/T 16422.2 |
| Humidity Control | Yes (Xe-2 & Xe-3 standard |
| Water Spray | Yes (deionized water, programmable during light/dark cycles) |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1, Q-SUN Xe-3, Q-SUN B02 |
| Radiation Intensity | ≤1800 W/m² |
| Light Exposure Duration | 1–9999 h (continuously adjustable) |
| Humidity Control | Yes (RH range per IEC 60068-2-78 & ASTM G154) |
| Water Spray | Purified water spray, programmable during light/dark cycles |
| Lamp Type | Air-cooled xenon arc lamp |
| Lamp Life | ~1500 hours |
| Filter Options | Daylight, Window Glass, Extended UV (per ISO 4892-2, ASTM G155, SAE J2527) |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-Sun Xe-1 |
| Lamp Power | 1800 W |
| Cooling Method | Air-Cooled |
| Lamp Life | ~1500 hours |
| Filter Options | Daylight, Window Glass, Extended UV |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 11341, IEC 60068-2-9 |
| Sample Capacity | Adjustable slide-out tray for 3D specimens |
| Control System | Touchscreen interface with programmable irradiance, temperature & humidity profiles |
| Irradiance Range | 0.35–0.65 W/m² @ 340 nm (adjustable) |
| Temperature Range | 10–90 °C (operational, dependent on filter and irradiance setting) |
| Humidity Range | 10–95% RH (non-condensing, controlled via water reservoir and chamber air circulation) |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1 |
| Radiation Intensity | ≤1800 W/m² |
| Light Exposure Duration | 1–9999 h (continuously adjustable) |
| Sample Tray Dimensions | 251 mm × 457 mm (9.88" × 18") |
| Lamp Configuration | Single air-cooled xenon arc lamp |
| Lamp Lifetime Warranty | 1500 hours |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 11341, GB/T 16422.2 |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Xe-1 |
| Lamp Type | Air-Cooled Xenon Arc Lamp |
| Lamp Lifetime | 1500 hours |
| Irradiance Control | SOLAR EYE Radiometer (340 nm, 420 nm, or TUV) |
| Black Panel Temperature Range | 42–120 °C |
| Filter Options | Daylight, Window Glass, Extended UV |
| Compliance | ASTM G151, ASTM G155, ISO 4892-2, ISO 105-B02, AATCC TM16, SAE J2527, IEC 60068-2-5, GB/T 8427, GB/T 14576, and over 30 additional international standards |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1 |
| Xenon Lamp Power | 1800 W |
| Chamber Type | Benchtop |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 11341, IEC 60068-2-9 |
| Software Interface | Q-Lab’s Windows-based SolarEye™ Control Software |
| Language Options | English, French, Spanish, Italian, German |
| Safety Features | Automatic shutdown on fault detection, door interlock, overtemperature protection |
| Cooling Option | Integrated refrigeration unit (optional) |
| Moisture Simulation | Purified water spray system with dual nozzles, programmable in light/dark cycles |
| Temperature Monitoring | Black panel thermometer (BPT) with NIST-traceable calibration support |
| Irradiance Control | SolarEye™ closed-loop feedback system with broadband (340 nm or 420 nm) or TUV sensor options |
| Filter Configurations | Daylight-Q, Window Glass-Q, Extended UV-Q filters |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1 |
| Cooling Method | Air-cooled |
| Lamp Configuration | Single xenon arc lamp |
| Lamp Life Warranty | 1500 hours |
| Irradiance Control | SOLAR EYE® broadband or narrowband (340 nm, 420 nm, or TUV) |
| Filter Type | Integrated single-piece borosilicate glass filter |
| Sample Orientation | 10° from horizontal |
| Sample Capacity | 17 specimens (standard flat-panel configuration) |
| Black Panel Temperature Range | Typically 35–110 °C (operational range dependent on irradiance and ambient conditions) |
| Chamber Air Temperature Range | Optional control available |
| Humidity Control | Not standard on Xe-1 |
| Programmable Water Spray | Optional |
| Compliance Support | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, ISO 11341, IEC 60068-2-9 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1 |
| Lamp Power | 1800 W |
| Light Source | Single Air-Cooled Xenon Arc Lamp |
| Lamp Life | ~1500 hours |
| Irradiance Control | SOLAR EYE® Spectral Sensor (340 nm, 420 nm or TUV) |
| Filter Options | Daylight, Window Glass, Extended UV |
| Sample Tray Dimensions | 251 mm × 457 mm |
| Black Panel Temperature Range | 35–103 °C |
| Optional Accessories | Water Spray System, Refrigerated Cooling Unit |
| Compliance | ASTM G155, ISO 4892-2, AATCC TM16, SAE J2527, DIN 75220, BS EN ISO 11341, ANSI Z79.1 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Xe-1 |
| Xenon Lamp Power | 1800 W |
| Black Panel Temperature Range | 35–103 °C (standard), 19–103 °C (with chiller option) |
| Humidity Control | Not available on base model (requires optional water spray system for wetting cycles) |
| Lamp Cooling | Air-cooled |
| Lamp Life | ~1500 hours |
| Irradiance Control | SOLAR EYE broadband or narrowband (340 nm, 420 nm, TUV) |
| Sample Tray Dimensions | 251 mm × 457 mm |
| Max Sample Capacity | 17 specimens (51 mm × 102 mm each) |
| Filter Type | Single fixed filter (e.g., Daylight-Q, Window-Q, Window-IR) |
| Communication Interface | Ethernet (standard), optional “Virtual Strip” PC software |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Model | Xe-1 |
| Type | Benchtop Xenon Arc Exposure Chamber |
| Lamp Configuration | Single Xenon Arc Lamp |
| Sample Orientation | Horizontal |
| Optional Accessories | Water Spray System, Refrigerated Cooling Unit |
| Control Interface | Touchscreen with 5-Language Support (English, French, Spanish, Italian, German) |
| Connectivity | Built-in Ethernet |
| Compliance Framework | Designed to support ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, and other photostability/weathering standards |
| Calibration | PATENTED AUTOCAL System for rapid irradiance calibration |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1 |
| Xenon Lamp Power | 1800 W |
| Irradiance Control | 1.3 W/m² @ 340 nm |
| Light Exposure Duration | Up to 1500 h per cycle |
| Humidity Control | Optional with water spray system |
| Cooling Option | Available with integrated refrigerated cooling unit |
| Compliance | ISO 4892-2, ASTM G155, SAE J2527, AATCC TM16, ISO 11341, IEC 60068-2-9 |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-1 |
| Radiation Intensity | ≤1800 W/m² |
| Light Exposure Duration | 1–9999 h (continuously adjustable) |
| Sample Tray Dimensions | 251 mm × 457 mm (9.88" × 18") |
| Lamp Configuration | Single xenon arc lamp |
| Compliance | ISO 4892-1, ISO 4892-2, ISO 11341 |
| Cooling Method | Air-cooled |
| Exhaust | Direct indoor venting enabled |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Q-SUN Xe-1 |
| Xenon Lamp Power | As specified in technical documentation |
| Irradiance Range | ≤1800 W/m² |
| Light Exposure Cycle | 1–9999 hours, continuously adjustable |
| Humidity Control Range | As specified in technical documentation |