ZHENHUAFENXI
Filter
Showing 1–30 of 39 results
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | BLP-10 |
| Sensor Range | 0–6 MPa (safety overload: 7.2 MPa) |
| Accuracy | <0.5% FS |
| Display Resolution | 0.001 MPa |
| Pressure Ramp Rate | 0.58 ± 0.1 MPa/s (4 ± 1 bar/s) |
| Test Media | Deionized Water |
| Operating Temperature | 5–40 °C |
| Power Supply | 220 V, 50 Hz, 0.6 kW |
| Test Modes | Pass/Fail (Method A), Incremental (Method A), Destructive (Method B) |
| Compliance | GB/T 4546–2008, ISO 7458:1989 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DCT |
| Max. Applied Force | 300 kg |
| Max. Piston Stroke | 130 mm |
| Current Output Range | 0–5 A (Resolution: 0.01 A) |
| Voltage Measurement Range | 0–200 mV (Resolution: 0.01 mV) |
| Resistivity Measurement Range | 1–1800 µΩ·m |
| Compliant Standards | ISO 10143:1995, YS/T 587.6 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GM-3 |
| Current Output | 5 A (adjustable constant-current source, resolution 0.001 A) |
| Voltage Measurement Resolution | 0.01 mV |
| Resistivity Resolution | 0.01 µΩ·m |
| Applied Pressure Range | 0–200 kg (motor-driven automatic loading) |
| Power Consumption | <100 W |
| Input Power | 220 V ±10%, 50 Hz |
| Compliance Standard | YS/T 587.6–2006 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DCY3F |
| Pricing | Available Upon Request |
| Max. Applied Force | 300 kg |
| Max. Piston Stroke | 100 mm |
| Current Output Range | 0–5 A (±0.01 A) |
| Voltage Measurement Range | 0–200 mV (±0.01 mV) |
| Sample Tube Inner Diameter | ≥20 mm (small), ≥30 mm (large) |
| Cross-sectional Area | ≥314 mm² (small), ≥700 mm² (large) |
| Electrode Spacing | 10 mm (small tube), 20 mm (large tube) |
| Resistivity Measurement Range | 1–1800 µΩ·m |
| Compliance | ISO 10143:1995, YS/T 587.6 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DHC-211 |
| Price | Upon Request |
| Specific Heat Range | 0.05–5 kJ/(kg·K) |
| Accuracy | ≤1% ± 0.002 for granular/powder samples |
| Temperature Range | −40 °C to 100 °C |
| Sample Volume | ~55 cm³ (granules or powders) |
| Calorimetric Resolution | 0.001 °C |
| Calorimeter Power Supply | 0–24 V (1 mV resolution), 0–1 A (0.01 mA resolution) |
| Vacuum Capability | −0.095 MPa |
| Primary Method | Adiabatic Mixing Calorimetry |
| Compliance | GJB 330A–2000 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | DIL0806A |
| Temperature Range | RT–1000 °C |
| Heating Rate | 0–20 °C/min |
| Temperature Accuracy | ±0.1 °C |
| Sample Dimensions | 10 mm × 50 mm |
| Atmosphere Compatibility | Inert, Oxidizing, Reducing Gases |
| Measurement Resolution (ΔL) | 0.1 µm |
| Sample Holder Material | Fused Quartz / Alumina |
| c-DTA® Function | Optional |
| Compliance Standards | ASTM E831, ASTM D696, ASTM D3386, DIN 51045 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | General Distributor |
| Country of Origin | Domestic (China) |
| Model | DMY |
| Pricing | Upon Request |
| Measuring Range | 0–490 N |
| Force Accuracy | ±0.3% F.S. |
| Force Display Resolution | 0.1 N |
| Display | 4-digit LED, unit selectable (N) |
| Sample Size | Three specimens, each 100 mm × 100 mm |
| Measurement Method | Static Sliding Block Method (per GB/T 4100–2015 & JC/T 1050–2007) |
| Automatic � | ₛ Calculation: Yes |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | DRH-300 |
| Measurement Principle | Guarded Hot Plate Method (ASTM C177, ISO 8302) |
| Test Environment | Ambient Temperature (18–25 °C, 20–80% RH) |
| Dimensions (L×W×H) | 1100 × 900 × 1300 mm |
| Thermal Conductivity Range | 0.001–2.2 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±1% |
| Temperature Control Precision | ±0.1 °C (Hot Plate & Cold Plate) |
| Sample Thickness | 5–50 mm |
| Sample Size Options | 200 × 200 mm or 300 × 300 mm |
| Power Supply | AC 220 V ±5%, 3.0 kW |
| Software | Windows-based Automated Thermal Analysis Suite (English & Chinese UI) |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | DRH-300C |
| Measurement Principle | Guarded Hot Plate Method (ASTM C177 / ISO 8302) |
| Thermal Conductivity Range | 0.001–2.7 W/m·K |
| Accuracy | ±3% |
| Repeatability | ±1% |
| Temperature Control Range | −20 °C to 70 °C |
| Sample Thickness | 15–100 mm (auto-measured, 0.1 mm resolution) |
| Sample Size | 300 mm × 300 mm |
| Compliance | ASTM C518, ISO 8301, GB/T 10295, EN 1946-3:1999 |
| Cooling Options | Forced air, external water bath, or Peltier-based electronic cooling |
| Software | PC-based automated data acquisition, real-time thermal resistance calculation, report generation, and GLP-compliant audit trail (optional) |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DRH-600 |
| Instrument Type | Guarded Hot Plate Method |
| Sample Capacity | Single specimen |
| Test Environment | Ambient pressure |
| Thermal Conductivity Range | 0.0015–3.0 W/m·K |
| Accuracy | ±3% |
| Repeatability | ±1% |
| Temperature Range (Cold Plate) | 0–99.9 °C |
| Temperature Range (Hot Plate) | Ambient to 99.9 °C |
| Specimen Dimensions (Max) | 600 × 600 × 200 mm |
| Specimen Flatness Tolerance | ≤0.5 mm |
| Thickness Measurement Range | 0–200 mm |
| Thickness Resolution | 0.01 mm |
| Applied Pressure Range | 0–1000 N |
| Pressure Resolution | 0.1 N |
| Temperature Resolution | 0.01 °C (Cold Plate), 0.1 °C (Hot Plate) |
| Power Supply | AC 220 V ±5%, 3.0 kW |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | DRL-III |
| Measurement Principle | Heat Flow Method |
| Thermal Conductivity Range | 0.010–50 W/m·K |
| Accuracy | ±3% |
| Repeatability | ±1% |
| Temperature Range | Ambient to 200 °C (Hot Plate), 0–99.99 °C (Cold Plate) |
| Sample Diameter | Ø10–30 mm |
| Sample Thickness | 0.02–20 mm |
| Thermal Resistance Range | 5×10⁻⁶ – 0.05 m²·K/W |
| Pressure Range | 0–1000 N |
| Displacement Resolution | 0.01 mm |
| Dimensions (L×W×H) | 60 cm × 58 cm × 90 cm |
| Compliance Standards | ASTM E1530, ASTM C518, ISO 8301, DIN EN 12939, DIN EN 13163, DIN EN 12667, JIS A 1412 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DRX-I-SPB |
| Instrument Type | Guarded Hot Plate Method (Water-Cooled) |
| Continuous Sample Capacity | 1–3 stacked layers |
| Test Environment | High-Temperature Atmosphere (up to 1400 °C) |
| Dimensions (L×W×H) | 1500 mm × 650 mm × 1120 mm |
| Thermal Conductivity Range | 0.015–2.7 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±1% |
| Temperature Range | Ambient to 1400 °C |
| Sample Form | Solid slabs or bricks (standard: Ø180 mm × 50 mm or ≤230 mm × 230 mm × 65 mm) |
| Heating Power Control | Adjustable, computer-regulated |
| Water Flow Rate | 10 g/s (temperature-stabilized coolant loop) |
| Total Power Consumption | ≤4.5 kW |
| Operating System | Windows 10 / 7 / XP |
| Electrical Supply | 220 V, 50 Hz |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DRX-II |
| Instrument Type | Heat Flow Method |
| Sample Capacity | Single sample per test |
| Test Environment | Ambient pressure |
| Thermal Conductivity Range | 0.015–50 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±2% |
| Dimensions (L×W×H) | 550×500×850 mm |
| Temperature Range | RT to 200 °C |
| Sample Form | Solid (rigid or flexible sheets, discs, composites) |
| Standards Compliance | ASTM E1530, ASTM C518, ISO 8301, JIS A1412, DIN EN 12939, DIN EN 13163, DIN EN 12667, MIL-I-49456A |
| Software | Integrated automated thermal analysis platform with calibration management, temperature ramp programming, and GLP-compliant reporting |
| Brand | ZHENHUAFENXI |
|---|---|
| Model | DRX-II-JG |
| Measurement Principle | Laser Flash Method (LFA) |
| Temperature Range | RT to 1000 °C |
| Thermal Diffusivity Range | 0.01–1000 mm²/s |
| Thermal Conductivity Range | 0.1–1000 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±2% (thermal diffusivity), ±3% (specific heat) |
| Sample Forms | Solid, Powder, Liquid, Film, Composite, Ceramic, Metal, Graphite, Polymer |
| Atmosphere Options | Ambient air, inert gas, oxidizing/reducing gas, vacuum (down to 10⁻³ Pa) |
| Sample Dimensions | Ø12–20 mm or ≥10×10 mm, thickness 0.1–10 mm (recommended 3 mm) |
| Detection | Infrared detector (non-contact) |
| Data Acquisition Rate | 2 MHz |
| Software Platform | Windows 10 (64-bit), GLP-compliant reporting, ASTM E2585 / ISO 22007-4 / GB/T 22588 / GJB 1201.1-91 compliant |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DRX-II-PS |
| Instrument Principle | Transient Plane Source (TPS) Method |
| Sample Throughput | Single-sample mode |
| Test Environment | Ambient pressure |
| Dimensions (L×W×H) | 750 × 400 × 600 mm |
| Accuracy | ±3% |
| Thermal Conductivity Range | 0.005–500 W/m·K |
| Repeatability | ±3% |
| Temperature Range Options | Room temperature to 200 °C / 600 °C / 1000 °C (user-selectable configuration) |
| Measurement Duration | 1–160 s |
| Sample Thickness | 0.1–5 mm |
| Power Supply | AC 220 V, ≤500 W |
| Interface | RS232/USB for PC communication |
| Software | Integrated TPS analysis suite with automated reporting and ASTM/ISO-compliant data export |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | DRX-II-SPB 1600 |
| Measurement Principle | Heat Flow Method |
| Temperature Range | 600–1600 °C |
| Thermal Conductivity Range | 0.001–5 W/(m·K) |
| Accuracy | ≤3% |
| Repeatability | ≤3% |
| Sample Form | Solid |
| Sample Dimensions | φ119 × (35–45) mm |
| Test Atmosphere | Inert gas or vacuum (≤1000 Pa) |
| Heating Element | Molybdenum rod |
| Cooling System | Water-cooled furnace housing |
| Pressure Control Range | 0–0.1 MPa |
| Sensor | Imported U.S. heat flux sensor |
| Software | Fully automated analysis software with digital point monitoring |
| Physical Dimensions (L×W×H) | 1300 × 800 × 1450 mm |
| Power Supply | 220 V, 50 Hz |
| Brand | ZHENHUAFENXI |
|---|---|
| Model | DRX-II-SPB |
| Principle | Heat Flow Meter Method (HFMM) |
| Temperature Range | 600–1600 °C |
| Thermal Conductivity Range | 0.001–5 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±3% |
| Sample Form | Solid disk (φ119 mm × 35–45 mm) |
| Atmosphere Control | Inert gas (N₂, Ar) or vacuum (≤1000 Pa) |
| Pressure Control | 0–0.1 MPa |
| Heating Element | Molybdenum rod |
| Cooling | External recirculating chiller |
| Sensor | Imported U.S. heat flux transducer |
| Compliance | GB/T 10295, GB/T 17911.8-2002, YB/T 4130-2005 |
| Dimensions (L×W×H) | 1300×800×1450 mm |
| Power Supply | 220 V, 50 Hz |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | GDT |
| Temperature Range | Ambient to 900 °C / 1400 °C / 1600 °C (selectable furnace configuration) |
| Constant Current Source | 0–40 A, 0–24 V, stability ±0.01 A |
| Sample Diameter | 20–50 mm |
| Sample Length | 100 mm (customizable) |
| Voltage Tap Spacing | Adjustable |
| Dimensional Measurement | Digital Caliper, 0–150 mm, resolution 0.01 mm |
| Voltage Measurement | Digital Voltmeter, 0–199.99 mV, resolution 0.01 mV |
| Temperature Controller | Japanese imported microcomputer-based programmable controller with SSR solid-state relay drive and universal thermocouple input (K, S, R types supported) |
| Brand | ZHENHUAFENXI |
|---|---|
| Model | GHC-II |
| Temperature Range | Ambient to 1400 °C |
| Specific Heat Capacity Range | >0.5 J/(g·K) |
| Accuracy | ≤1% |
| Temperature Control Stability | ±0.3 K over 30 min |
| Temperature Resolution | 0.01 K |
| Heating Element | Graphite Rod (Carbon Rod) |
| Control Method | Intelligent PID with Programmable Ramp/Soak Profiles |
| Data Acquisition | Fully Automated PC-Based System |
| Calorimeter Heat Capacity | ~1500 J/K |
| Calorimeter Temperature Resolution | 0.01 °C |
| Thermal Shield Monitoring | Triple Thermocouple Array (0.01 K resolution) |
| Constant-Temperature Bath Range | −5.00 to 60.00 °C |
| Oxidation Protection | Argon Purge Compatible |
| Sample Dimensions | Ø11 mm × 30 mm (solid) |
| Compliance | GJB 330A–2000, GJB 1715–93 |
| Power Supply | 220 V / 50 Hz, <6 kW |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | GHC-II-10 |
| Temperature Range | 100–800 °C |
| Specific Heat Range | 0.05–5 kJ/(kg·K) |
| Accuracy | ≤1% ± 0.002 kJ/(kg·K) |
| Sample Dimensions | Ø16–Ø20 × 30–50 mm |
| Temperature Resolution | 0.001 °C |
| Calorimeter Heat Capacity | ~1500 J/K |
| Control Method | Intelligent PID with Programmable Ramp/Soak |
| Compliance | GJB 330A-2000, GJB 1715-93 |
| Power Supply | 220 V / 50 Hz, <2 kW |
| Software Environment | Windows 10/7/XP (Chinese GUI) |
| Interface | RS-232 or USB data acquisition |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | GHR-3K |
| Measurement Principle | Steady-State Cylindrical Guarded Hot Pipe Method (per GB/T 10296–2008 & ISO 8497:1994) |
| Thermal Conductivity Range | 0.05–80 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±2% |
| Test Temperature Range | Ambient to 350 °C |
| Sample Form | Cylindrical tubular insulation shells (e.g., rubber-plastic, fiberglass, rock wool, glass wool pipes) |
| Specimen Dimensions | Outer diameter up to 25 mm, length 500 mm, metering section 200 mm, guard sections 150 mm each |
| Heating Power | 0–500 W (adjustable constant-current source, ±0.5% stability) |
| Environmental Control Precision | ±1 °C |
| Guard Zone Temperature Control Precision | ±1 °C |
| Data Acquisition | 16-bit multi-channel thermocouple input card |
| Software Interface | Windows-based control, real-time monitoring, automated calculation of thermal conductivity (λ), surface thermal resistance (Rₛ), and heat transfer coefficient (h) |
| Compliance | Fully aligned with GB/T 10296–2008 and ISO 8497:1994 requirements for steady-state thermal transmission characterization of cylindrical insulation systems |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | HDRX-RL03 |
| Measurement Principle | Heat Flow Meter (HFM) Method |
| Thermal Conductivity Range | 0.001–5 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ≤3% |
| Temperature Range | RT to 1000 °C |
| Sample Thickness Range | 0.5–60 mm |
| Thickness Resolution | 1 µm |
| Thickness Accuracy | ±0.01 mm |
| Applied Pressure Range | 0–3.0 MPa |
| Pressure Accuracy | <0.5% FS |
| Cold-Side Cooling | 10 L Precision Circulating Bath (−5 to 80 °C, 0.01 °C resolution) |
| Hot-Side Control | PID-regulated heating with multi-point real-time temperature monitoring |
| Compliance Standards | ASTM C518, ASTM E1530, ISO 22007-2 |
| Data Acquisition | 32-bit high-resolution ADC, modular architecture supporting specific heat and thermal diffusivity expansion modules |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | HF-PJ-12 |
| Temperature Range | 1200 °C |
| Heating Rate | 5 °C/min (standard), up to 20 °C/min (customizable) |
| Temperature Accuracy | ±1 °C |
| Sample Diameter/Width | 6 mm (cylindrical or square cross-section) |
| Sample Length | 50 mm |
| Expansion Measurement Range | 0–5 mm |
| Resolution | 0.1 µm |
| Atmosphere Options | Vacuum (base pressure −0.1 MPa), Argon, Inert Gas |
| Cooling Rates | 30–200 °C/s (air, gas, liquid nitrogen options) |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | JRWS |
| Temperature Range | 0–100 °C |
| Temp. Measurement Accuracy | ≤ ±0.1 °C |
| Resolution | 0.01 °C |
| Tracking Precision | 0.05 °C |
| Deformation Measurement | Resistive Strain Gauge (250 mm gauge length, 0.1 με accuracy) |
| Specimen Container Volume | 50 L |
| Thermal Conductivity Range | 0.01–10 W/(m·K) |
| Specific Heat Capacity Range | 0.5–5.0 kJ/(kg·K) |
| Specimen Geometry for λ & cp | Ø200 mm × 400 mm cylinder with Ø40 mm central bore |
| Water Bath Temp. Range | 10–80 °C |
| Water Bath Ramp Rate | 0.5–1.0 °C/min |
| Power Consumption | < 8 kW |
| Compliance | GB/T 50081–2019, JG/T 329–2011, DL/T 5150–2017, SL 352–2006 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | JRWS-06A-50L |
| Temperature Control Range | 5–95 °C |
| Temperature Resolution | 0.01 °C |
| Temperature Tracking Accuracy | ≤ ±0.05 °C |
| Adiabatic Vessel Capacity | 50 L |
| Vessel Material | Stainless Steel |
| Internal Water Bath Stability | ≤ ±1 °C |
| Cooling Method | Compressed Air (Cooling Power < 1.5 kW) |
| Electrical Supply | 220 V / 50 Hz / Adjustable Power up to 4 kW |
| Compliance | GB/T 50080–2016, DL/T 5150–2001, SL 3562–2006, DL/T 536–2006 |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | NHD-III |
| Furnace Type | Box-Type Muffle Furnace |
| Max Temperature | 1800 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 9 kW |
| Heating Element | Molybdenum Disilicide (MoSi₂) Rods |
| Internal Chamber Dimensions | 300 × 200 × 120 mm |
| Nominal Volume | 0.5 L |
| Heating Rate | 0–15 °C/min |
| Sample Holder Material | High-Purity Graphite (≥1800 °C service temp) |
| Sample Geometry | Triangular Pyrometric Cone (base width: 8.5 mm) |
| Cone Rotation Speed | 1–5 rpm |
| Temperature Sensor | Type B Dual Platinum-Rhodium Thermocouple |
| Imaging System | ≥10 MP Color CCD Camera with IR Filter & Continuous Zoom Lens |
| Image Capture Resolution | One frame per 1 °C |
| Software | Fully Automated PCE Analysis Suite (compliant with ASTM C134/C135 and ISO 528 workflows) |
| Atmosphere Compatibility | Inert or reducing gas inlet port |
| Safety Protections | Current-limiting startup, overload protection, thermal runaway prevention |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | PM |
| Instrument Type | Portable Green Density Penetrometer |
| Application | Green density evaluation of non-metallic powder compacts (e.g., ceramic, graphite, refractory preforms) |
| Penetrator Tip Diameters | Ø0.5 mm, Ø0.75 mm, Ø1.0 mm (stainless steel) |
| Maximum Penetrator Travel Distance from Worktable | ~100 mm |
| Horizontal Distance from Penetrator Axis to Machine Frame | 210 mm |
| Test Load Options | Selectable dead-weight masses (kg) |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PZY-III-1000 |
| Temperature Range | RT to 1000 °C |
| Heating Rate | 0–30 °C/min (programmable) |
| Displacement Resolution | 0.1 µm |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | QM-3 |
| Price | Upon Request |
| Grinding Chamber Dimensions | Φ305 × 305 mm |
| Rotational Speed | 70 rpm |
| Motor Power | 1.5 kW |
| Supply Voltage | 380 V AC, 4-pole |
| Motor Output Speed | 960 rpm |
| Ball Charge | 285 precision steel balls (ASTM A29/A29M Grade 52100 bearing steel), comprising: 43 × Φ36.5 mm, 67 × Φ30.2 mm, 10 × Φ25.4 mm, 71 × Φ19.1 mm, 94 × Φ15.9 mm |
| Lining Material | Stainless Steel (AISI 304) |
| Counter | 4-digit programmable revolution counter with auto-stop function |
| Compliance | GB/T 26567–2011 (Bond Ball Mill Work Index Test Method) |
| Brand | ZHENHUAFENXI |
|---|---|
| Origin | Hunan, China |
| Model | RZL-II-16 |
| High-Temperature Range | 1600 °C |
| Low-Temperature Range | 10–50 °C |
| Thermal Shock ΔT Range | 1000 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 15 °C/min |
| Cooling Rate | 50 °C/min |