Industry-specific Instruments
Filter
Showing 5671–5700 of 6020 results
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.120-FWP-C |
| Standards Compliance | ASTM D1238, ISO 1133, JIS K6719-1/2, K6921-2, K6922-2, K6923-1, K6924-1, K6926-2, K7210 |
| Temperature Range | Up to 400 °C |
| Control Method | PID-based digital temperature regulation |
| Loading Method | Automatic weight switching |
| Cutting Mechanism | Motorized auto-cutter (for Method A) |
| Interface | Touchscreen HMI |
| Optional | Integrated thermal printer |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.120-LABOT-MI |
| Temperature Range | Up to 300 °C (optional 400 °C) |
| Die Dimensions | φ2.095 ± 0.005 mm × 8.000 ± 0.025 mm |
| Piston Diameter | φ9.474 ± 0.007 mm |
| Cylinder Inner Diameter | φ9.550 ± 0.007 mm |
| Standard Test Loads | 0.325, 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf |
| Compliance | ASTM D1238, ISO 1133, GB/T 1031–2016, JIS K7210 |
| Automation Level | Fully Automated (A-Method MFR & B-Method MVR), Including Auto-Feeding, Auto-Loading, Auto-Cutting, Auto-Weighing, Auto-Cleaning (Die/Cylinder/Piston/Nozzle Rod/Lint Removal) |
| Position Configurations | 12-, 24-, or 50-station modular carousel |
| Power Supply | AC 200/220 V, 1φ, 15 A, 50/60 Hz |
| Air Supply | ≥0.5 MPa |
| Dimensions (12/24-station) | ~950 × 680 × 1720 mm |
| Weight | ~350 kg |
| Dimensions (50-station) | ~1100 × 700 × 1750 mm |
| Weight | ~400 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.120-SAS-2000 |
| Temperature Range | Up to 300 °C (optional 400 °C) |
| Die Dimensions | φ2.095 ± 0.005 mm × 8.000 ± 0.025 mm |
| Piston Head Diameter | φ9.474 ± 0.007 mm |
| Cylinder Bore | φ9.550 ± 0.007 mm |
| Standard Loads | 0.325, 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf |
| Test Methods | ASTM D1238 (Method A & B), ISO 1133, GB/T 1031–2016, JIS K7210 |
| Automation Level | Triple-station fully automated sample feeding, loading, testing, die/cylinder cleaning (solvent-based), and B-method distance measurement via rotary encoder |
| Power Supply | AC 200/220 V, 15 A, 50/60 Hz |
| Air Supply | ≥0.5 MPa |
| Dimensions (Triple-Station) | W675 × D725 × H1370 mm |
| Weight | ~220 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.145-A |
| Standards Compliance | JIS K7115, ASTM D2990, ISO 899-1 |
| Maximum Load Capacity | 500 N (50 kgf) |
| Displacement Resolution | 0.01 mm |
| Displacement Range | 150 mm |
| Temperature Range | Up to 200 °C |
| Load Application Method | Sliding-type dead-weight loading |
| Displacement Sensor Type | Magnetic strain-based linear scale |
| Configurable Fixture Options | Tensile, Compression, and Flexural Jigs |
| Optional Environmental Chambers | Low-Temperature, Constant-Temperature & Humidity, Split-Type Chambers |
| Test Specimen Support Stations | 3, 6, or 10 positions |
| Software Platform | Windows-compatible proprietary creep analysis software |
| Power Supply | Configuration-dependent |
| Dimensions & Weight | Specification-dependent |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.145-C |
| Compliance | JIS K7115, ASTM D2990, ISO 899-1, JIS K6263, ISO 3384, JIS K7162 |
| Max Load Capacity | 5 kN (500 kgf) |
| Displacement Resolution | 0.01 mm |
| Displacement Range | 100 mm |
| Temperature Range | Up to 200 °C |
| Actuation | Servo Motor Drive |
| Displacement Sensor | Magnetic Strain-Type Linear Scale |
| Fixture Options | Tensile, Compression, Flexural, Cryogenic Chamber, Environmental Chamber (Constant Temp/Humidity), Segmented Chamber, Mark-to-Mark Displacement Module |
| Mounting Configurations | 3-, 6-, or 10-station test frame |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.145-D |
| Standard Compliance | JIS Z 0237 |
| Specimen Dimensions | 25 mm × 150 mm (or 12 ± 0.5 mm × 150 mm) |
| Test Plate | SUS304, 50 mm × 125 mm × ≥1.1 mm |
| Load Range | 200 gf to 1,000 gf (±5 g tolerance) |
| Fixture Type | Upper hook-type, Lower flat chuck (30 mm width) |
| Vertical Travel | Max. 45 mm, motorized auto-stop actuation |
| Temperature Capability | Up to 150 °C |
| Timer Functions | Preheating time setting, fall-time measurement, programmable test duration |
| Optional Accessories | Low-temperature chamber, constant temperature/humidity chamber, in-chamber lighting, 90° peel test kit |
| Power Supply & Dimensions | Configuration-dependent |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.148-HD-500 |
| Max Operating Temperature | 500 °C |
| Test Standard Compliance | ASTM D648, ASTM D1525, ISO 75-1, ISO 306, JIS K7191-1, JIS K7206, GB/T 1633, GB/T 1634 |
| Construction Material | Fused Quartz Enclosure |
| Configuration | Sealed Gas-Bath Heating System |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.148-HD-PC |
| Standards Compliance | ASTM D648, D1525 |
| Heating Rate (HDT/Vicat) | 120 ± 10 °C/hr |
| Bending Stress Options | 0.45 MPa (ISO B / ASTM), 1.80 MPa (ISO A / ASTM), 8.00 MPa (ISO C) |
| Load Force Options | DTUL: 76.5–3210 gf |
| Vicat | 10 ± 0.2 N or 50 ± 1 N |
| Ball Pressure | 19.6–20 N |
| Penetrator Geometry | DTUL: R3.0 ± 0.2 mm |
| Vicat | 1.000 ± 0.015 mm² flat-ended needle |
| Ball Pressure | 5 mm diameter spherical tip |
| Span Length | 64 ± 1 mm or 100 ± 1 mm (standard) |
| Displacement Resolution | 0.001 mm (LVDT-based, 4 mm stroke) |
| Max Temp | 300 °C (silicone oil bath) |
| Oil Volume | ~10 L (3-station), ~12 L (4-station), ~17 L (6-station) |
| Cooling | Optional integrated refrigerated chiller (HDA series) |
| Software | Windows 10–compatible proprietary control & analysis suite |
| Power Supply | Single-phase 200/220 V, 20 A (3/4 stations) or 30 A (6 stations) |
| Dimensions (Floor-standing) | W1100 × D700 × H1500 mm |
| Weight | 180–300 kg |
| Dimensions (Bench-top) | W1100 × D700 × H1000 mm |
| Weight | 155–185 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.148-HDA |
| Standards Compliance | JIS K7191-1, K7206 |
| Max Temperature | 300 °C (oil bath) |
| Heating Rate | 120 ± 10 °C/hr (HDT/Vicat), 50 ± 5 °C/hr (Vicat optional) |
| Bending Stress Options | 0.45 MPa (ISO B), 1.80 MPa (ISO A), 8.00 MPa (ISO C), 0.455 MPa / 1.82 MPa (ASTM) |
| Load Range | DTUL: 76.5–3,210 gf (2 selectable) |
| Vicat | 10 ± 0.2 N or 50 ± 1 N |
| BP | 19.6–20 N |
| Penetrator Tip Geometry | DTUL: R3.0 ± 0.2 mm |
| Vicat | 1.000 ± 0.015 mm² flat-ended |
| BP | Ø5 mm spherical |
| Deflection Resolution | 0.001 mm (differential sensor, 4 mm stroke) |
| Span Lengths | 64 ± 1 mm, 100 ± 1 mm (standard), 101.6 ± 0.5 mm (optional) |
| Sample Capacity | Up to 120 specimens (40 × 3 trays) |
| Oil Volume | ~10 L (3/4-station), ~17 L (6-station) |
| Cooling | Integrated refrigerated chiller (standard on HDA variant) |
| Stirring | Paddle-type agitator (2 units for 3/4 stations |
| Power Supply | With chiller — 3-phase AC200/220 V, 20 A / 30 A, 50/60 Hz |
| Air Supply | ≥0.5 MPa |
| Dimensions (W×D×H) | ~1460 × 900 × 1715 mm |
| Weight | 450–550 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.149 |
| Compliance Standards | JIS K6922-2, JIS Z1703, ASTM D1693, ISO 1872-2 |
| Specimen Dimensions | 13 ± 0.8 mm (w) × 38 ± 2.5 mm (l) × 2 or 3 mm (t) |
| Notch Depth | 0.3 mm or 0.5 mm |
| Notch Length | 19.1 ± 0.1 mm |
| Test Tube | φ30 mm × 200 mm (OD × L), 5 pcs |
| Operating Temperature | 50 °C |
| Accessories | 5 cork stoppers, 5 aluminum foils, 5 specimen holders, 1 bending jig, 1 transfer jig, 1 notch jig |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.153 |
| Type | Import |
| Distributor Type | Authorized Distributor |
| Pricing | Upon Request |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.153-GTR |
| Torque Range | Max. 20.0 mN·m |
| Temperature Range | Up to 200 °C (optional cryo-cooling unit: 10–200 °C) |
| Rotor Speed | 25 rpm (50 Hz) / 24 rpm (60 Hz) |
| Timer Capacity | Max. 999,999 s (or 99 h 59 min 59 s) |
| Rotor Dimensions | φ5 × 110 mm |
| Sample Tube Dimensions | φ12 × 90 mm (OD × L) |
| Power Supply | AC 100 V, 1-phase, 10 A, 50/60 Hz |
| Dimensions & Weight | Approx. W570 × D375 × H720 mm, ~30 kg |
| Accessories Included | 100 rotors, 100 sample tubes |
| Optional | Silicone oil (~2 L), dedicated software, strip-chart recorder |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.156 |
| Compliance | JIS K6387, JIS K6392, JIS K6828 |
| Measurement Principle | Rotational shear-induced coagulation under controlled pressure and speed |
| Sample Form | Liquid latex emulsions (synthetic rubber latex, synthetic resin latex) |
| Test Output | Coagulum mass or volume after defined rotational cycle |
| Operating Mode | Manual or semi-automated rotational test with fixed-speed motor drive |
| Sample Container | Cylindrical vessel with replaceable polyethylene liner |
| Pressure Application | Pneumatically or mechanically applied axial load on lid assembly |
| Rotation Speed | Fixed-speed (standardized per JIS, typically 100–300 rpm range) |
| Test Duration | Programmable or timer-controlled (commonly 5–30 min per run) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.156-AUTO |
| Sample Mass | 50 ± 0.5 g |
| Rotor Diameter | Φ50 mm, Thickness: 13 mm |
| Rotor Speed | 1,000 ± 20 rpm |
| Load Application | True dead-weight loading with motorized vertical actuation |
| Load Range | 0–100 kgf (resolution: 0.05 kgf |
| standard test loads | 5, 10, 15 kgf) |
| Die Cavity | Internal diameter Φ76 mm, Height 85 mm |
| Timer Range | 0–99 h 99 min |
| Power Supply | 220 V, single-phase, 15 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈550 × 750 × 1080 mm |
| Weight | ≈178 kg |
| Compliance | JIS K 6387, K 6392, K 6828 |
| Accessories | 10 polyethylene liners |
| Optional | Safety guard |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.161 |
| Compliance Standards | JIS C 3003, IEC 60172, IEC 60851 |
| Test Principle | Gravimetric static elongation under controlled suspension time |
| Measurement Output | Dimensional change (mm) of wound coil after 1-minute load retention and 1-minute recovery |
| Operating Mode | Manual loading, gravity-driven extension, timed dwell |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.162 |
| Standard Compliance | JIS P8147, ASTM D1894, ASTM D3248, TAPPI T503, TAPPI T542, TAPPI T815 |
| Measurement Principle | Inclined-plane static/dynamic friction coefficient determination via tangent of slip initiation angle (tanθ) |
| Test Surface Length | 600 mm |
| Specimen Platform | Tempered glass top plate |
| Slider Dimensions | 60 mm × 100 mm |
| Slider Mass | 1000 g |
| Tilt Angle Range | 0–70° (graduated in 0.25° increments) |
| Tilt Speed | 1°/s (adjustable) |
| Power Supply | 220 V, single-phase, 3 A, 50/60 Hz |
| Dimensions (W×D×H) | 750 × 350 × 425 mm |
| Weight | ~29 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.162-FS |
| Standards Compliance | JIS K7125, ISO 8295, ASTM D3247, TAPPI T816, P8147 |
| Measurement Principle | Lateral pull-type static & kinetic COF determination via load cell transduction |
| Sample Mounting | Dual-surface clamping (stationary bed + sliding sled) |
| Output | μs (static) and μk (kinetic) values |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.162-S5 |
| Test Method | Inclined-plane static/dynamic COF measurement |
| Standards | JIS P8147, ASTM D1894, ASTM D3248, TAPPI T503, T542, T815 |
| Stations | 5 parallel test positions |
| Display | Integrated LCD with print output |
| Data Output | Individual and averaged COF values |
| Compliance | Suitable for QC labs operating under ISO/IEC 17025, GLP, and packaging material validation per FDA 21 CFR Part 11 (when paired with compliant software) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.163 |
| Standards Compliance | JIS C 3003, IEC 60172, IEC 60851-5 |
| Test Method | Springback Deflection Measurement |
| Operating Principle | Mechanical Resilience Assessment via Controlled Coiling and Release |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.170-AUTO |
| Temperature Range | −60 °C to 100 °C (dry ice cooling) |
| Heating Rate | 2 °C/min |
| Specimen Dimensions | W 6.35 ± 0.03 mm × L 64 mm × T 0.8–1.5 mm |
| Gauge Length | 40 mm |
| Angular Range | 0–270° (1° resolution) |
| Torque Application | Pulley-type weight system (5 g, 10 g, 20 g, 50 g) |
| Encoder Type | Rotary encoder for torsional angle measurement |
| Power Supply | 220 V, single-phase, 10 A, 50/60 Hz |
| Host Dimensions/Weight | ~300 × 400 × 780 mm / ~40 kg |
| Control Box Dimensions/Weight | ~330 × 350 × 180 mm / ~10 kg |
| Standards Compliance | JIS K6734, K6745, K6773, K6924-2, ASTM D1043, ISO 458 |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.171 |
| Standards Compliance | JIS A 5756, JIS K 6262, ASTM D395 (Method A & B), ISO 815 |
| Application | Compression set measurement of vulcanized and thermoplastic elastomers |
| Load Configuration | Fixed-height compression via precision-machined spacers |
| Test Specimen Dimensions | Standard cylindrical specimens (diameter 29.0 ± 0.5 mm, height 12.5 ± 0.5 mm) per ASTM D395 and ISO 815 |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.173-S |
| Max. Temperature | 500 °C |
| Heating Rate | 2 °C/min |
| Load Range | 100 g to 2,600 g |
| Short-Circuit Detection Current | 5 ± 1 mA (max 50 mA) |
| Sample Holder Capacity | Up to 12 specimens (1 heated block × 4 positions × 3 channels) |
| Power Supply (Main Unit) | AC 200 V, 3-phase, 50 A, 50/60 Hz |
| Power Supply (PC) | AC 100 V, single-phase, ≤15 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 1800 × 750 × 2000 mm |
| Weight | Approx. 550 kg |
| Compliance Standards | GB/T 4074.6, IEC 60851-6, JIS C3216-6:2011 |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.191-TM |
| Roll Diameter Options | 3″, 4″, 5″, 6″, or 8″ |
| Roll Length Options | 8″, 8″, 12″, 15″, or 20″ |
| Max. Roll Surface Temperature | 200 °C (optional: 300 °C) |
| Roll Speed (Front) | 12.5–31.25 rpm |
| Roll Speed (Rear) | 10–25 rpm |
| Speed Ratio | ~1:1.25 |
| Heating Method | Cartridge-type electric heaters |
| Safety Systems | Dual knee-actuated stop plates, mushroom-type emergency stop button, overload metal circuit breaker (standard on ≥5″ rolls), optional Y-bar emergency tilt bar, photoelectric safety curtains, reverse-rotation interlock |
| Lubrication | Adjustable needle-valve drip feed |
| Standard Accessories | One set of PTFE collection board, calendering discs, high-temp bearing oil |
| Optional Upgrades | Variable-speed drive, independent roll motorization, digital PID temperature controller, recirculating oil lubrication system, automatic knife blade assembly |
| Power Supply | AC 200 V, 3-phase, 20–50 A, 50/60 Hz |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.191-WM |
| Roll Dimensions | φ3″ × 8″, φ4″ × 8″, φ5″ × 12″, φ6″ × 15″, φ8″ × 20″ |
| Heating Method | Steam (rotary joint type) |
| Max Roll Surface Temperature | 200 °C (at steam pressure ≥1.5 MPa) |
| Roll Speed Ratio | ~1:1.25 |
| Front Roll Speed | 12.5–31.25 rpm |
| Rear Roll Speed | 10–25 rpm |
| Safety Systems | Knee-actuated stop plates (front/rear), mushroom-type emergency stop button, overload protection circuit breaker (for rolls ≥5″), optional Y-bar emergency tilt bar, photoelectric safety curtain, reverse-rotation prevention device |
| Lubrication | Drip-type oil feed with needle valve |
| Standard Accessories | One set of PTFE collection board, calendering disc, hot bearing oil |
| Optional Accessories | Variable-speed drive, independent roll drive, digital temperature controller, oil circulation system, scraper assembly, warm-water circulation system (WM-series only) |
| Power Supply | AC 200 V, 3-phase, 20–50 A, 50/60 Hz |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.212 |
| Sealing Width | 5–20 mm (adjustable) |
| Sealing Length | 300 mm |
| Max. Temperature | 300 °C |
| Pressure Range | 0–0.5 MPa (graduated in 0.01 MPa increments) |
| Dwell Time | 0.01–99.99 s |
| Pneumatic Actuation | Cylinder-driven |
| Cylinder Stroke | ≤45 mm |
| Power Supply | AC 100 V, 15 A, 50/60 Hz |
| Air Supply Requirement | ≥0.5 MPa |
| Main Unit Dimensions | W450 × D385 × H650 mm, ~105 kg |
| Control Panel Dimensions | W230 × D450 × H515 mm, ~15 kg |
| Standard Accessories | Foot switch |
| Optional Accessories | Safety guard, hot tack fixture, specimen clamping plate, air compressor |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.213 |
| Standard Compliance | JIS Z1514, JIS Z1521, JIS Z1707 |
| Sealing Area Options | 20 × 40 mm (3-row) or 20 × 180 mm (single-row) |
| Max Temperature | 300 °C (user-specified setpoint) |
| Pressure Application Method | True-load direct-acting pneumatic/hydraulic system |
| Platen Gap | 8 mm |
| Pressure Range | 49–294 kPa (0.5–3.0 kgf/cm²) |
| Timer Range | 0.01–99.99 s |
| Power Supply | AC 100 V, 1-phase, 10 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 750 × 350 × 670 mm |
| Weight | Approx. 65 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.219 |
| Heating System | Electric |
| Platen Size | 200 × 200 mm |
| Maximum Opening | 90 mm |
| Toggle Rod Diameter | Φ45 mm |
| Maximum Pressure | 62.9 MPa (100 kN) |
| Maximum Force Output | 10 ton |
| Temperature Range | Up to 300 °C (optional up to 400 °C) |
| Power Supply | 220 V, Single-Phase, 20 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈465 × 400 × 781 mm |
| Weight | ≈169 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.220 |
| Test Standards | JIS K7124-1, JIS Z1702, JIS Z1707, ASTM D1709, ISO 7765-1 |
| Drop Height (Method A) | 0.66 ± 0.01 m |
| Drop Height (Method B) | 1.50 ± 0.01 m |
| Dart Geometry (Method A) | Hemispherical, φ38 ± 1 mm, 40 g |
| Dart Geometry (Method B) | Hemispherical, φ50 ± 1 mm, 320 g |
| Max Dart Mass | 890 g (Method A), 1410 g (Method B) |
| Clamp Inner Diameter | φ125 ± 2 mm |
| Pneumatic Pressure Range | 0–1.0 MPa (graduated at 0.05 MPa intervals) |
| Power Supply | AC 100 V, 15 A, 50/60 Hz |
| Air Supply Requirement | ≥0.5 MPa |
| Dimensions (W×D×H) | ≈620 × 400 × 2150 mm |
| Weight | ≈55 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.255 |
| Compliance | UL-1581 |
| Application | Specimen Preparation for Tensile Testing of Wire Insulation and Jacketing Materials |
| Type | Precision Rotary Abrasive Grinding System |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.305-YPL |
| Applicable Standards | JIS K6404-11, P8112, P8131, TAPPI T403, T807, T810, ISO 2758, ISO 2759 |
| Pressure Range | Low-pressure configuration (typically up to 1.6 MPa / 232 psi) |
| Test Principle | Hydraulic diaphragm burst method with clamped specimen |
| Display | Digital readout |
| Compliance | Designed for GLP-compliant lab environments with manual data recording capability |