Optical Instruments
Filter
Showing 5671–5700 of 7822 results
| Brand | Photonic Lattice |
|---|---|
| Origin | Japan |
| Model | WPA-100-S |
| Measurement Range | 0–4000 nm |
| Repeatability | <1.0 nm |
| Pixel Resolution | 384 × 288 (≈110,000 pixels) |
| Measurement Wavelengths | 523 nm, 543 nm, 575 nm |
| Field of View | 11.6 × 15.8 mm |
| Dimensions | 200 × 275 × 309.5 mm |
| Weight | 9 kg (unit), 4 kg (power supply) |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Software | WPA-View (dedicated for WPA-100-S) |
| Brand | Photonic Lattice |
|---|---|
| Origin | Japan |
| Model | WPA-200, WPA-200-L |
| Measurement Range | 0–3500 nm |
| Repeatability | <0.1 nm |
| Pixel Resolution | 384 × 288 |
| Measurement Wavelengths | 523 nm, 543 nm, 575 nm |
| Field of View | 100 × 136 mm (WPA-200), 250 × 340 mm (WPA-200-L) |
| Dimensions | 310 × 466 × 605.5 mm (WPA-200), 450 × 593 × 915.5 mm (WPA-200-L) |
| Weight | 20 kg (WPA-200), 26 kg (WPA-200-L) |
| Data Interface | GigE (camera), RS232C (motor control) |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Software | WPA-View |
| Brand | Photonic Lattice |
|---|---|
| Origin | Japan |
| Model | WPA-200 |
| Measurement Principle | Full-field quantitative photoelasticity via monochromatic polarized light imaging |
| Phase Retardation Range | 0–3500 nm |
| Wavelength Options | 520 nm, 543 nm, 575 nm |
| Minimum Resolution | 0.001 nm |
| Repeatability (σ) | < 0.1 nm |
| Field of View (Standard) | 218 × 290 mm to 360 × 480 mm |
| Output Data | Retardation (nm), Slow Axis Orientation (°), Optional Stress Conversion (MPa) |
| Imaging Sensor | High-sensitivity CCD camera |
| Measurement Time per Frame | ≤ 3 s |
| Software Options | Real-time analysis, Lens-specific evaluation module, External control interface, CD mode |
| Brand | Photonic Lattice |
|---|---|
| Origin | Japan |
| Model | WPA-200L |
| Measurement Range (Retardation) | 0–3500 nm (extendable to 10,000 nm) |
| Wavelength Options | Triple-wavelength (e.g., 532/633/780 nm) |
| Output Units | Retardation (nm), Azimuth Angle (°), Stress (MPa), Stress Birefringence (nm/mm) |
| Measurement Mode | Full-field imaging |
| Analysis Modes | Point, Line, Area, 3D stress mapping |
| Typical Measurement Time | < 5 seconds per field of view |
| Brand | Photonic Lattice |
|---|---|
| Origin | Japan |
| Model | WPA-200-MT |
| Output Parameters | Retardation [nm], Fast Axis Angle [°], Stress-Converted Retardation (optional) [MPa] |
| Measurement Wavelengths | 523 nm, 543 nm, 575 nm |
| Birefringence Range | 0–3500 nm |
| Minimum Resolution | 0.001 nm |
| Repeatability | <0.1 nm (σ) |
| Standard Field of View | 34 × 40 mm |
| Optional Lenses | FOV range 6.3 × 7.5 mm to 17.5 × 21 mm |
| Optional Functions | Real-time Analysis Software, Lens Evaluation Software, Data Processing Software, External Control Interface, CD Mode |
| Brand | Photonic Lattice |
|---|---|
| Origin | Japan |
| Model | WPA-200-NIR |
| Measurement Wavelengths | 810 nm, 850 nm, 870 nm |
| Measurement Range | 0–3500 nm |
| Repeatability | <1.0 nm |
| Field of View | 3×4 mm to 100×133 mm |
| Sensor Resolution | 384 × 288 pixels |
| Dimensions | 270 × 337 × 631 mm |
| Weight | 13 kg |
| Brand | Photonic Lattice |
|---|---|
| Origin | Japan |
| Model | WPA-MICRO |
| Measurement Range | 0–3500 nm |
| Repeatability | <1.0 nm |
| Pixel Resolution | 384 × 288 |
| Measurement Wavelengths | 523 nm, 543 nm, 575 nm |
| Field of View (FOV) | 5× objective: 1.1 × 0.8 mm |
| 10× | 0.5 × 0.4 mm |
| 20× | 270 × 200 µm |
| 50× | 110 × 80 µm |
| 100× | 55 × 40 µm |
| Dimensions | 250 × 487 × 690 mm |
| Weight | 11 kg |
| Data Interface | GigE (camera), RS-232C (motor control) |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Software | WPA-View (for Micro) |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | OEM Camera Platform |
| Price Range | USD 42,000 – 70,000 |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PL-1/2 & PL-1/4 (Dual-Order, Tunable Retardation) |
| Price | Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PMA |
| Pricing | Available Upon Request |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PQ Series Photoreactor |
| Light Source | 300 W Xenon Arc Lamp (Air-Cooled or Water-Cooled Optional) |
| Irradiation Mode | Top-Illumination (External Irradiation via Quartz Window) |
| Quartz Window | JGS-2 Fused Silica, Φ110 mm × 8 mm Thickness |
| Reactor Body | Borosilicate Glass, Total Volume ≈ 350 mL, Effective Reaction Volume ≈ 150 mL |
| Sealing | PTFE O-Ring + Flange Joint |
| Standard Ports | Two 19/26 Ground-Glass Joints |
| Sampling Port | Septum-Sealed Glass Threaded Port (Manual In-Situ Sampling Without System Venting) |
| Gas Handling | Dual Gas Inlet/Outlet for Purge & Atmosphere Control (N₂, Ar, O₂, Air) |
| Optional Accessories | Removable Quartz Jacketed Cooling Sleeve, Vacuum Port, Glass Valve, Extended Neck, Thermocouple Port |
| Compliance | Designed for ISO/IEC 17025-aligned laboratory workflows |
| Origin | Japan |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | PLP-10 |
| Pricing | Upon Request |
| Brand | Piezoconcept |
|---|---|
| Origin | France |
| Model | AU-LT5 / AU-LT6 |
| Travel (XYZ) | 100 / 200 / 300 µm |
| Angular Range (θx, θy) | 1.1–4.5 mrad |
| Angular Range (θz) | 5 mrad |
| Sensor Type | Si-HR silicon strain gauge |
| Closed-loop Resolution | < 0.1 nm |
| Noise Floor | 10–50 pm |
| Linearity | 0.02% FS |
| Controller | 16-bit DAC, analog (BNC, ±5 V / ±10 V / 0–10 V) & USB interface |
| Material | Aluminum (standard), Invar (LT5.100 optional) |
| Thickness | 21 mm |
| Compatibility | Inverted optical microscopes (Zeiss, Olympus, Nikon, Leica) |
| Brand | Pinzhichuangsi (Product Intelligence and Creativity) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DTC600S-1 |
| X-axis Travel | 150 mm |
| Y-axis Travel | 100 mm |
| Z-axis Travel | 100 mm |
| Measuring Accuracy (X/Y) | ≤ (3 + L/200) µm (L in mm) |
| Resolution (X/Y/Z) | 0.001 mm |
| Optical Magnification (Visual) | 10×–65× (10× binocular eyepieces + 1.0×–6.5× zoom objective, including distortion) |
| Image Magnification (Digital) | 30×–225× |
| Camera | 6 MP GigE color CCD with 1.0× C-mount adapter |
| Illumination | Adjustable ring LED surface light + adjustable edge LED contour light + dual-axis positionable auxiliary LED lights |
| Base Material | Grade 000 granite |
| Weight | 80 kg |
| Dimensions (W×D×H) | 500 × 350 × 600 mm |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | PixelCam |
| Pricing | Upon Request |
| Origin | UK |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | PixelCam™ |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SpectraCAM SWIR |
| Pricing | Available Upon Request |
| Spectral Range | 500–1700 nm |
| Number of Spectral Bands | 6 simultaneous channels |
| Frame Rate | Up to 30 fps (full-frame) |
| Spatial Resolution | 640 × 512 pixels |
| Sensor Type | High-sensitivity InGaAs focal plane array (FPA) |
| Output Interface | 14-bit CameraLink |
| Calibration Features | Integrated Automatic Gain Control (AGC) and Non-Uniformity Correction (NUC) |
| Filter Configuration | Interchangeable spectral filter wheel |
| Origin | Hong Kong |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (PRC) |
| Model | PL-OE |
| Pricing | Upon Request |
| Brand | Ekspla |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | PL2241 |
| Core Configuration | Diode-Pumped Solid-State (DPSS) Master Oscillator + Flashlamp-Pumped Regenerative Amplifier |
| Pulse Energy | Up to 100 mJ @ 1064 nm |
| Pulse Duration | <30 ps (<25 ps optional) |
| Repetition Rate | Up to 250 Hz |
| Beam Pointing Stability | <5 µrad RMS over 8 hours |
| Harmonic Generation | Second (532 nm), Third (355 nm), Fourth (266 nm) via thermostabilized KD*P/KDP crystals |
| Trigger Jitter | <0.1 ns (optical sync output) |
| Control Interface | RS-232 with included LabVIEW drivers + standalone backlit keypad |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Russia |
| Model | 206 |
| Pricing | Available Upon Request |
| Brand | PLASMA |
|---|---|
| Origin | Russia |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GNIK-3-4 |
| Pricing | Available Upon Request |
| Brand | Rayscience |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HCL-100U(I) |
| Laser Type | Gas Laser (He-Cd) |
| Output Wavelength | 325 nm (UV) and/or 441.6 nm (blue) |
| Nominal Output Power | Up to 100 mW (at 441.6 nm), up to 30 mW (at 325 nm) |
| Beam Diameter | ≤1.2 mm |
| Beam Divergence | ≤1.5 mrad |
| Polarization | Linear, >100:1 |
| Warm-up Time | <15 min |
| Lifetime | ≥10,000 hours (typical) |
| Cooling | Air-cooled |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Brand | Plasma |
|---|---|
| Origin | Russia |
| Model | HCL-100V |
| Laser Type | Gas Laser |
| Wavelengths | 325 nm (HeCd), 442 nm (HeCd), 337.1 nm (N₂) |
| Output Power | 100 mW (442 nm, TEM₀₀), 20/100 mW (dual-wavelength), 240 μJ @ 337.1 nm (N₂) |
| Coherence Length | 30 cm (with “I” suffix), 10 cm (standard) |
| Beam Diameter | 2.0–2.1 mm |
| Beam Divergence | 0.9–2.5 mrad |
| Pulse Width (N₂) | 5–8 ns |
| Repetition Rate (N₂) | 1–1000 Hz |
| Cooling | Air / Water (model-dependent) |
| Compliance | CE-marked for laboratory use in EU |
| designed per IEC 60825-1 | 2014 Class 3B/4 laser safety standards |
| Brand | PLASMA |
|---|---|
| Origin | Russia |
| Type | Sealed Gas Discharge CO₂ Laser |
| Wavelength | 10.57–10.63 µm |
| Output Power | 3.0 W |
| Beam Mode | >90% TEM₀₀ |
| Polarization Ratio | 100:1 |
| Cooling | Air-Cooled |
| Configuration | Integrated RF-Excited Laser Head with Power Supply and Control Interface |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | JJ110 (Pt), JJ120 (Stainless Steel) |
| Price Range | USD 420 – 690 |
| Light Source Type | Other (Compatible with Xenon & Mercury Lamps) |
| Irradiation Mode | Internal Illumination |
| Electrode Material | Pure Platinum (JJ110) / High-Grade Stainless Steel (JJ120) |
| Housing Material | Polytetrafluoroethylene (PTFE) |
| Operating Temperature | Ambient (20–25 °C recommended) |
| Electrode Exchange | Tool-Free, Quick-Release Mechanism |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Regional Origin | Domestic (China) |
| Model | Customizable (e.g., Pt005, Pt010, Pt015, Pt017, or sheet/mesh variants) |
| Price Range | USD 0.15 – 75.00 per unit (based on configuration) |
| Component Category | Optical & Electrochemical Instrument Component |
| Platinum Purity | ≥99.95% |
| Electrode Stem Material | Borosilicate Glass or PTFE |
| Stem Diameter | 6 mm or 8 mm (PTFE) |
| Sheet Dimensions | 5×10 mm to 20×20 mm |
| Sheet Thickness | 0.1–0.5 mm |
| Mesh Specification | 52 mesh |
| Wire Diameters | 0.5 mm or 1.0 mm |
| Wire Lengths | 5–37 mm |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLC-GDHC I |
| Flow Control Range | 3–100 mL/min (1 gas inlet standard) |
| Temperature Range | 5–80 °C (thermostatic bath controlled) |
| Pressure Rating | 0.2 MPa (gauge) |
| Pressure Measurement Range | −1 to 1 MPa (gauge), ±0.25% F.S. |
| Pressure Control Range | −0.08 to 0.3 MPa |
| Pressure Stability | ±0.01 MPa |
| Light Source | Integrated white LED (400–800 nm), motorized vertical adjustment |
| Optical Window Transmission | 0.19–5 μm, Ø35 mm |
| Reactor Gas Volume | 120 mL |
| Max Liquid Fill Volume | 10 mL |
| Catalyst Loading | Powder catalysts evenly spread on hydrophobic porous gas diffusion layer (GDL), GDL diameter: Φ35 mm (effective), Φ37–Φ40 mm (overall) |
| Main Body Material | High-temp powder-coated metal chassis |
| Gas Diffusion Chamber | Anodized aluminum |
| Inlet Chamber | Borosilicate glass |
| Brand | PerfectLight (PoFaiLai) |
|---|---|
| Model | PLD MOPM-I |
| Wavelength Range | 400–1000 nm |
| Measurement Accuracy | < ±3% (VIS, certified by NIM, China) |
| Detector Compatibility | Photodiode & Thermopile Sensors |
| Display | 5-inch capacitive touchscreen |
| Battery Life | Up to 21 h standby |
| Operating Environment | Real-time probe temperature & ambient pressure monitoring |
| Measurement Modes | Direct, Spatial, Temporal, and Sequential |
| Quantum Flux Output | Supported for monochromatic & broadband irradiation |
| Equivalent Wavelength Input | User-configurable for spectral weighting |
| Data Output | Numerical & derived photometric/quantum metrics (e.g., photon flux, irradiance, spatial uniformity index) |
| Brand | MMR |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PLS |
| Pricing | Upon Request |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLS-AL150300 |
| Light Source Type | Xenon Lamp |
| Illumination Mode | External Irradiation |
| Focal Length | 150 mm |
| f-number | f/2.5 |
| Stray Light Level | 5×10⁻⁴ |
| Wavelength Step Resolution | 1 nm |
| Grating Type | Imported Dual Grating |
| Grating Active Area | 45×45 mm² |
| Groove Density | 2400 lines/mm (multiple options available) |
| Blaze Wavelengths | #1: 300 nm, #2: 780 nm |
| Output Wavelength Range | 350–750 nm |
| Slit Width Adjustment | 0.01–3 nm (continuous manual) |
| Optional Motorized Filter Wheel | 4-position, anti-second-order-diffraction filters |