Other Physical Property Testing Instruments
Filter
Showing 331–360 of 489 results
| Brand | Labthink |
|---|---|
| Model | C612M |
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Torque Sensor Range | 5 N·m (standard) |
| Accuracy | ±0.5% of reading (10–100% FS) |
| Resolution | 0.0001 N·m |
| Cap Holding Diameter | Φ10–Φ80 mm |
| Bottle Body Holding Diameter | Φ5–Φ170 mm |
| Bottle Height Range | 20–400 mm |
| Max Test Torque | 2 N·m (customizable) |
| Air Supply Requirement | 0.7 MPa (101.5 psi), clean dry air (user-supplied) |
| Statistical Batch Size | 0–999 samples |
| Dimensions (L×W×H) | 550 × 365 × 1150 mm |
| Weight | 39 kg |
| Power | 220 VAC ±10%, 50 Hz or 120 VAC ±10%, 60 Hz (dual-voltage compatible) |
| Brand | Labthink |
|---|---|
| Model | GC Series |
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Application | Quantitative determination of residual ethylene oxide in EO-sterilized medical devices and personal protective equipment (PPE) |
| Detection Principle | Headspace gas chromatography (HS-GC) with flame ionization detection (FID) |
| Compliance Standards | GB/T 14233.1–2008, GB/T 16886.7–2001, ISO 10993-7, ASTM F2573, USP <801>, FDA 21 CFR Part 11 (software-enabled audit trail & electronic signature support) |
| Sample Preparation | Aqueous extraction followed by thermal equilibration in sealed headspace vials |
| Detection Limit | ≤0.1 µg/g (as per method validation per ISO/IEC 17025) |
| Linear Range | 0.5–50 µg/g EO in solid matrix |
| Calibration Method | Gravimetric standard stock solution preparation (1 × 10⁻² g/L), serial dilution, six-point calibration curve |
| Data Output | Peak area or height vs. concentration |
| Brand | Labthink |
|---|---|
| Model | GC-7800 |
| Detection Principle | Headspace Gas Chromatography with Dual FID/TCD Detectors |
| Temperature Control Accuracy | ±0.1°C (sample chambers), ±0.5°C (gas lines & valve oven) |
| Sample Capacity | Dual 300 mL headspace vials |
| Injection Volume | 1.0 mL (optional: 0.5/2/3 mL) |
| Programmable Temperature Ramping | 5-stage linear, 1–30 °C/min |
| Column Oven Stability | <±0.1°C, gradient ≤1% across active zone |
| FID Detection Limit | ≤1×10⁻¹¹ g/s (benzene) |
| TCD Sensitivity | ≥3000 mV·mL/mg (benzene/H₂) |
| Data System | PC-based chromatography workstation with audit trail, method validation support, and GLP-compliant reporting |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | RCP-50 |
| Capacity | 50 L |
| Operating Temperature Range | ≥10 °C to 135 °C |
| Maximum Working Pressure | 0–0.22 MPa |
| Timer Range | 0–999 min |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 2 kW |
| Cooling Method | Forced-air cooling with back-pressure compensation |
| Safety Features | Over-temperature, over-pressure, low-water-level, and leakage protection |
| Compliance Documentation | Full set of calibration certificates, verification reports, and metrological traceability records per Chinese National Verification Regulation JJG 974–2021 |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | W3/062 |
| Pricing | Available Upon Request |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | CryoComplete |
| Pricing | Upon Request |
| Temperature Range | 77 K to 500 K |
| Resistance Measurement Range | 100 µΩ to 1 GΩ (standard) |
| Cryogen | Liquid Nitrogen |
| Vacuum Environment | Yes |
| Temperature Stability | ±50 mK |
| LN₂ Capacity | 1.2 L |
| Cool-down Time to 77 K | 15 min |
| Hold Time at 77 K | 8 h |
| Optical Windows | 4 quartz windows |
| Sample Mounting | Pre-wired 8-pin board |
| Measurement Modes | DC, AC (sine/triangle/square), lock-in (3 full channels) |
| Source Current Range | 1 pA to 100 mA |
| Source Frequency Range | 100 µHz to 100 kHz (square wave <5 kHz) |
| Max Measured Voltage | 10 V |
| Input Impedance | >10 GΩ (differential) |
| Sample Leakage Current | 50 pA @ 10 V (coaxial) or 50 fA @ 10 V (guarded triaxial) |
| Voltage Noise | <5 nV/√Hz @ 83 Hz |
| 1/f Voltage Noise (sample test) | <100 nV |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LCM-2 |
| Pricing | Available Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LCM-3 |
| Pricing | Available Upon Request |
| Brand | Linos |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 011 |
| Pricing | Upon Request |
| Type | Amplitude Modulator (EO-AM-NR) / Phase Modulator (EO-PM-NR) |
| Crystal Material | Lithium Niobate (LiNbO₃) |
| Wavelength Ranges | C1: 600–900 nm |
| C2 | 900–1250 nm |
| C3 | 1250–1650 nm |
| C4 | 400–600 nm |
| Aperture | 2 mm |
| Input Connector | SMA Female |
| Half-Wave Voltage (Vπ) | 360 V @ 1064 nm (Typ.) for EO-AM-NR |
| Max. Optical Power Density | 2 W/mm² @ 532 nm, 4 W/mm² @ 1064 nm |
| Bandwidth | DC to 100 MHz |
| Coupling | DC-coupled |
| Brand | TOYO Corporation |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EC-1 |
| Pricing | Available Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LIT |
| Pricing | Upon Request |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Model | LOW TEMPERATURE XYZ PIEZO SCANNER |
| Scanning Range | 50 × 50 × 24 µm @ 300 K, 30 × 30 × 15 µm @ <4 K |
| Operating Temperature Range | 10 mK – 300 K |
| Maximum Magnetic Field Tolerance | 40 T |
| Actuator Material | Piezoceramic stack integrated with titanium and alumina ceramic housing |
| Structural Components | Stainless steel screws, oxygen-free copper wiring, FR4 PCB substrate |
| Feedback Option | Closed-loop operation available per axis with heterodyne fiber interferometry (1–10 µW optical power per axis) |
| Mass | 16 g |
| Dimensions | 24 × 24 × 9.2 mm |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | LT-sSNOM |
| Price | Upon Request |
| Wavelength Range | 532 nm – 20 µm (with metallic reflective optics) |
| AFM Scanner | Fiber-interferometer-equipped piezoelectric stage, scan range 30 × 30 × 15 µm (@ 4 K) |
| XYZ Sample Nanopositioner | 6 × 6 × 12 mm travel |
| Off-Axis Parabolic Mirror Nanopositioner | 4 × 4 × 6 mm travel |
| Position Sensor Resolution | 200 nm (resistive) |
| Outer Diameter | 49 mm |
| Temperature Range | 10 mK – 300 K |
| Maximum Magnetic Field | 31 T |
| Electrical Contacts | 8-point feedthrough on sample stage |
| Supported AFM Modes | Contact, Dynamic, Non-Contact (ncAFM), Magnetic Force Microscopy (MFM), Conductive AFM (cAFM), Kelvin Probe Force Microscopy (KPFM), Photoinduced Force Microscopy (PRFM), Electrostatic Force Microscopy (EFM) |
| Origin | Japan |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | LSM Series |
| Price | Upon Request |
| Brand | LUM |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LUMiFrac |
| Quotation | Upon Request |
| Principle | Centrifugal Fracture Testing (Dynamic Load Application via Rotating Rotor) |
| Max. Centrifugal Force Range | 0.1 N – 6.5 kN |
| Rotational Speed Range | 100 – 13,000 rpm |
| Tensile Strength Measurement Range | up to 80 MPa |
| Sample Capacity | 8 parallel specimens |
| Sample Dimensions | max. 30 × 30 × >1 mm³ |
| Bonded Area Diameter | 7 mm, 10 mm or custom |
| Bonded Surface Materials | metallic & non-metallic substrates |
| Specimen Mass Range | 4.1 g – 38.7 g (Cu/W-based reference: ~58 g) |
| Temperature Control Range | −11 °C to +40 °C |
| Measurement Duration | 1 min – 99 h |
| Compliance | ISO 4624, DIN EN 15870, DIN EN 14869-2, JIS K 5600-5-7 |
| Data Interface | USB |
| Power Supply | 100/120/230 V, 50/60 Hz |
| Max. Power Consumption | 1050 W |
| Net Weight | 56 kg |
| Dimensions (W×H×D) | 380 × 296 × 640 mm³ |
| Software Platform | SEPView® v6.x with real-time critical force calculation, statistical comparison, GLP-compliant audit trail, and FDA 21 CFR Part 11-ready user access control |
| Brand | LUM |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LUMiFuge |
| Price | Upon Request |
| Brand | LUM |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | LUMiReader PSA |
| Pricing | Upon Request |
| Brand | LUM |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LUMiReader X-Ray |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 5300 |
| Pricing | Upon Request |
| Channel Count | 256–100,000 (in multiples of 256) |
| Voltage Range | 0–5.0 V |
| Max Charge Current | 1.5 A or 2.5 A |
| Max Discharge Current | 2.5 A |
| Voltage Accuracy | ±5 mV |
| Current Accuracy | ±2 mA |
| Energy Accuracy | ±0.2 mAh/hour |
| Min Discharge Cutoff Voltage | 2.0 V |
| Max Charge Voltage Limit | 5.0 V |
| Termination Criteria | 16 programmable conditions including time, voltage, current, dV/dt, capacity, coulombic efficiency, and ΔV |
| Data Logging Interval | As low as 1 minute per cell |
| Independent Channel Control | Yes |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 8500 Series |
| Quotation | Upon Request |
| Voltage Range | Up to 1000 V |
| Current Range | Up to 1000 A |
| Minimum Step Time & Data Acquisition Interval | 50 ms (standard), optional sub-50 ms capability |
| Operating Modes | Galvanostatic (CC), Potentiostatic (CV), Power Control (CP), Resistance Control (CR), and hybrid step sequencing |
| Regenerative Energy Recovery | Grid-to-Battery (G2B) and Battery-to-Grid (B2G) bidirectional architecture |
| Software Platform | MACCOR Test Executive v7.x or later |
| Brand | Metis |
|---|---|
| Origin | Belgium |
| Model | CDM-M |
| Maximum Energy | 100+ kJ |
| Default Energy | 4 kJ |
| Modular Energy Block | 4 kJ |
| Peak Voltage | 3 kV |
| Interface | RS232 |
| Control Architecture | High-precision programmable controller |
| Compliance | Designed for industrial integration per IEC 61000-4 electromagnetic compatibility standards |
| Cooling | Forced-air or optional liquid cooling |
| Pulse Rise Time | <100 µs (typical, dependent on coil inductance and load) |
| Peak Current Capability | Up to 50 kA (custom configurations) |
| Brand | Metis |
|---|---|
| Origin | Belgium |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CryoPulse-BI |
| Pricing | Upon Request |
| Brand | Metis |
|---|---|
| Origin | Belgium |
| Model | HyMAC |
| Frequency Range | 5–2500 Hz |
| Output Power | 1200 VA (optional 3 kVA) |
| Maximum Field Strength | 10 kA/m or 1.7 T |
| Measurement Outputs | Hc, Br, Bm, Hm, Core Loss, Permeability, Eddy Current Loss, Hysteresis Loss |
| Operating Modes | Rapid Prediction Mode, Fixed-Field Mode, Swept-Field Mode |
| Compliance | IEC 60404-2, IEC 60404-3, IEC 60404-6 |
| Sample Fixtures | Epstein frame, Single Sheet Tester (SST), Toroidal core fixture, Yoke-based clamping systems |
| Software Interface | Windows-native GUI with real-time waveform display, automated parameter extraction, and export to CSV/Excel |
| Brand | Metis |
|---|---|
| Origin | Belgium |
| Model | HyMPulse |
| Measurement Principle | Pulsed-field magnetization with four-quadrant hysteresis loop acquisition |
| Maximum Field | >16 T |
| Energy Storage Capacity | 28 kJ (expandable) |
| Standard Measurement Coil | 6.5 T, 50 mm bore diameter |
| Sample Temperature Range | 20–180 °C |
| Software Platform | Windows-based proprietary control and analysis suite |
| Output Parameters | Br, HcB, HcJ, Hknee, (BH)max, Hmax |
| Brand | Metis |
|---|---|
| Origin | Belgium |
| Distributor Type | General Distributor |
| Import Status | Imported |
| Cooling Options | Natural Convection, Forced Air, Liquid Cooling |
| Design Methodology | CAD-Based Mechanical Design & Finite Element Analysis (FEA) for Magnetic Flux and Structural Optimization |
| Compliance Framework | Designed for integration with industrial magnetizing power supplies compliant with IEC 61000-4 series EMC standards and ISO 9001-certified manufacturing processes |
| Packaging | Custom Protective Enclosure for Transit and Storage |
| Reusability | High-cycle mechanical durability with precision-machined ferromagnetic pole pieces and non-magnetic structural housing |
| Brand | Metis |
|---|---|
| Origin | Belgium |
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Pricing | Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model Series | FillPal™, InMotion™, SC1(H), SC30(H) |
| Application Scope | Fully automated sample introduction, rinsing, drying, and (where applicable) heating for density and refractive index measurement |
| Compliance Context | Designed to support GLP/GMP workflows with audit-trail-capable software integration |
| Fluid Handling Architecture | Positive-pressure filling (SC-series), peristaltic pumping (FillPal/InMotion), chemically resistant wetted materials (e.g., PTFE, ETFE, sapphire, Hastelloy C-276 where specified) |
| Temperature Control | Ambient-only (FillPal, InMotion, SC1/SC30) or heated up to 100 °C (SC1H/SC30H) |
| Sample Capacity | 1 (FillPal, SC1, SC1H) or up to 303 positions (InMotion), or 30 vials (SC30, SC30H) |
| Cleaning Protocol | Full-cycle automated rinse-dry sequence with configurable solvent selection and dwell times |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | BSDX |
| Pricing | Available Upon Request |
| Brand | Micromeritics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ASAP 2020 |
| Pricing | Available Upon Request |
| Origin | Russia |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | MMS |
| Pricing | Upon Request |
| Cooling Medium | Liquid Nitrogen |
| Operating Temperature Range | 110–365 K |
| Magnetocaloric Temperature Change Range | ≥0.1 K |
| Temperature Stability During Measurement | ±0.05 K |
| Magnetic Field Range | 0.02–1.8 T |
| Magnetic Field Ramp Rate | 0.05–6 T/s |