- All
- Favorite
- Popular
- Most rated
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | iXon 888 |
| Pixel Size | 13 µm |
| Sensor Type | Back-Illuminated Electron-Multiplying CCD |
| Quantum Efficiency | >95% (peak) |
| Cooling | Thermoelectric (−80 °C typical operating temperature) |
| Readout Modes | EMCCD and conventional CCD |
| Frame Rate | Up to 30 fps at full resolution (configurable via ROI and binning) |
| Interface | USB 3.0 |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | iXon Ultra 897 |
| Pixel Size | 16 µm |
| Readout Speed | 17 MHz (full frame) |
| Frame Rate | 56 fps (512 × 512), 595 fps (128 × 128 ROI) |
| Cooling | Thermoelectric to −100 °C |
| Quantum Efficiency | Extended back-illuminated response (EX2 technology) |
| Gain Calibration | RealGain™ and EMCAL™ |
| Interface | USB 2.0 with raw data access |
| Operating Modes | EMCCD and conventional CCD |
| Software Features | OptAcquire, iCam, Counting Conversion, Edge Suppression |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | Sona 4.2B-6 |
| Image Resolution | 2048 × 2048 |
| Pixel Size | 6.5 µm × 6.5 µm |
| Sensor Dimensions | 13.3 mm × 13.3 mm |
| Onboard Memory | 1 GB |
| Readout Speed | 310 MHz |
| Dynamic Range | 34,000:1 |
| Quantum Efficiency | 95% |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | iDus |
| Effective Pixels | 1024 |
| Pixel Size | 25 µm |
| Cooling | TE-cooled to –100 °C (iDus 401/420), –95 °C (iDus 416), –90 °C (iDus 491/492) |
| Sensor Types | Back-illuminated deep-depletion CCD, front-illuminated CCD, InGaAs (1.7 µm & 2.2 µm cutoff) |
| Peak Quantum Efficiency | up to 95% (CCD), >85% (1.7 µm InGaAs), >70% (2.2 µm InGaAs) |
| Key Technology | UltraVac™ vacuum architecture, single fused-silica window, fringe suppression, open-electrode design (optional) |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | C-RED New Space |
| Effective Pixels | 640 × 512 |
| Pixel Size | 15 µm |
| Full-Frame Frame Rate | 600 fps |
| Windowed Mode (32 × 4) | 32,066 fps |
| Read Noise | <30 e⁻ |
| Dynamic Range | 93 dB (True 16-bit mode) |
| Operating Temperature Range | -40 °C to +65 °C |
| Sensor Material | InGaAs (VGA array) |
| Cooling | Advanced passive/thermoelectric hybrid thermal management |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | Newton |
| Sensor Pixel Size | 13.5 × 13.5 µm or 26 × 26 µm |
| Cooling | Thermoelectric (TE) to –100°C |
| Readout Speed | Multi-Megahertz (up to 3 MHz) |
| Quantum Efficiency | Up to 95% |
| Vacuum Technology | UltraVac™ |
| Sensor Architecture | EMCCD or conventional CCD |
| Spectral Acquisition Rate | >1600 spectra/sec (Newton 920) |
| Pixel Array Options | 1024 × 255, 2048 × 512, or 1600 × 400 |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | Zyla 4.2 PLUS sCMOS |
| Image Resolution | 2048 × 2048 |
| Pixel Size | 6.5 µm |
| Sensor Area | 13 mm × 13 mm |
| Onboard Memory | 4 GB |
| Readout Speed | 540 MHz |
| Dynamic Range | 33,000:1 |
| Quantum Efficiency (QE) | 82% |
| Interface | USB 3.0 |
| Full-Frame Frame Rate | 53 fps |
| FCS ROI Frame Rate (2048 × 8) | 26,041 fps |
| Read Noise | < 1 e⁻ |
| Linearity | 99.8% |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Model | C-Blue One |
| Image Resolution | 0.5 MP (812 × 612), 1.7 MP (1608 × 1104), or 7.1 MP (3208 × 2200) |
| Pixel Size | 9 µm (0.5 MP & 1.7 MP variants), 4.5 µm (7.1 MP variant) |
| Sensor Diagonal | 9.6 mm (0.5 MP), 17.6 mm (1.7 MP & 7.1 MP) |
| Interface | CoaXPress 2.0 or SFP+ 10 GigE |
| Bit Depth | 14-bit |
| Quantum Efficiency | >70% @ peak (550–650 nm) |
| Read Noise | <1.5 e⁻ (typical, correlated double sampling) |
| Shutter Type | Global shutter |
| Compliance | GigE Vision v2.0, GenICam3 |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Model | C-RED One |
| Sensor Format | 320 × 256 |
| Pixel Size | 24 µm |
| Spectral Range | J/H/K bands (0.9–2.5 µm) |
| Readout Noise | Sub-electron |
| Max Frame Rate | 3500 fps (full frame) / 10 kHz (ROI) |
| Cooling | Integrated pulse-tube cryocooler to 90 K |
| Vacuum System | Sealed, autonomous regeneration |
| Vibration Reduction | 10× active suppression |
| Readout Modes | Global reset, rolling reset, single readout, CDS, multiple non-destructive reads (MDR) |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Marana 4.2B-11 |
| Image Resolution | 4.2 MP (2048 × 2048) |
| Pixel Size | 11 µm |
| Sensor Format | 22.5 mm × 22.5 mm (32 mm diagonal) |
| Readout Speed | 100 MHz (16-bit mode) |
| Dynamic Range | 53,000:1 |
| Quantum Efficiency | 95% @ peak (600 nm) |
| Cooling | -45 °C (thermo-electric vacuum-sealed) |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Model | C-Blue One UV |
| Image Resolution | 2848 × 2848 |
| Pixel Size | 2.74 µm |
| Sensor Diagonal | 11.2 mm |
| Interface | CoaXPress 2.0 or SFP+ 10GigE |
| Bit Depth | 14-bit |
| Quantum Efficiency | >70% (peak in UV) |
| Shutter Type | Global Shutter |
| Spectral Range | 200–1000 nm |
| Cooling | Active thermoelectric stabilization down to 0 °C |
| Lens Mount | CS-mount (with C-mount adapter) |
| ADC Modes | 8-bit / 12-bit selectable |
| Analog Gain | up to 24 dB |
| Digital Gain | up to 48 dB |
| ROI & Multi-Window Support | Yes |
| Compliance | GigE Vision v2.0, GenICam v3.x |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Model | C-RED 3 |
| Resolution | 640 × 512 pixels |
| Pixel Size | 15 µm |
| Readout Speed | Up to 600 fps (full frame) |
| Integration Time | < 5 µs (electronic shutter) |
| Cooling | Uncooled |
| Form Factor | Compact OEM-ready design |
| Power Consumption | < 5 W |
| Interface | Camera Link HS or 10 GbE |
| Spectral Range | 0.9–1.7 µm |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Model | C-RED 2 |
| Effective Resolution | 640 × 512 pixels |
| Pixel Size | 15 µm |
| Frame Rate | up to 600 fps |
| Read Noise | <30 e⁻ |
| Electronic Shutter Pulse Width | <5 µs |
| Maximum Exposure Time | 60 s |
| Dynamic Range | 93 dB |
| ADC Resolution | True 16-bit |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Model | OCAM² |
| Sensor Type | Back-illuminated Frame-transfer EMCCD (OCAM²K) / Split-frame EMCCD with Embedded Electronic Shutter (OCAM²S) |
| Resolution | 240 × 240 pixels |
| Pixel Size | 24 µm |
| Maximum Frame Rate | 2067 fps (up to 3700 fps in binning mode) |
| Read Noise | Sub-electron (≤0.7 e⁻ rms) |
| Quantum Efficiency | >95% (400–900 nm) |
| Minimum Integration Time | <1 µs (OCAM²S, with 50 ns timing precision) |
| Image Transfer Time | 12 µs per frame |
| Output Latency | As low as 43 µs post-exposure |
| Clocking Speed | Up to 7 Mlines/s |
| Spectral Range | 400–900 nm |
| Cooling | Peltier-cooled (−40 °C typical operating temperature) |
| Compliance | CE, RoHS, ISO 9001-manufactured |
| Software Interface | GenICam-compliant, supports GigE Vision and custom SDKs |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Model | C-RED 2 Lite |
| Effective Resolution | 640 × 512 |
| Pixel Size | 15 µm |
| Detector Type | InGaAs PIN photodiode array |
| Electronic Shutter Pulse Width | < 5 µs |
| Cooling | Passive thermoelectric stabilization (fanless) + optional water-cooled cold plate |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | iStar |
| Sensor Resolution | 1024 × 1024 pixels |
| Pixel Size | 13 µm |
| Active Sensor Area | 13.3 mm × 13.3 mm |
| Onboard Memory | 2 GB |
| Readout Speed | 5 MHz |
| Quantum Efficiency | >50% |
| Gating Width | <2 ns |
| Minimum Inter-Frame Interval (PIV mode) | 300 ns |
| Frame Rate (full frame) | up to 4,000 fps |
| Interface | USB 3.0 |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Marana 4.2B-6 |
| Image Resolution | 2048 × 2048 |
| Pixel Size | 6.5 µm × 6.5 µm |
| Sensor Active Area | 13.3 mm × 13.3 mm |
| Onboard Memory | 1 GB |
| Readout Speed | 310 MHz |
| Dynamic Range | 34,000:1 |
| Quantum Efficiency | 95% |
| Cooling Temperature | −45 °C |
| Full-Frame Frame Rate | 74 fps |
| ROI (512 × 512) Frame Rate | 397 fps |
| Read Noise | 1.2 e⁻ |
| Vacuum-Sealed Housing | Yes |
| Mechanical Shutter | None |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | iKon-M (912 & 934 variants) |
| Sensor Format | 512 × 512 (iKon-M 912) / 1024 × 1024 (iKon-M 934) |
| Effective Pixels | 4 Megapixel (iKon-M 934) |
| Pixel Size | 24 µm (iKon-M 912) / 13 µm (iKon-M 934) |
| Quantum Efficiency | >90% (iKon-M 912), up to 95% (iKon-M 934) |
| Read Noise | ≤3 e⁻ RMS |
| Full Well Capacity | 300,000 e⁻ (iKon-M 912) |
| Cooling | TE-cooled UltraVac™ vacuum enclosure to –100 °C |
| Readout Speeds | 50 kHz to 5 MHz |
| Dark Current | <0.0001 e⁻/pix/sec at –100 °C |
| Compliance | CE, RoHS, ISO 9001 certified manufacturing |
| Brand | Oxford Instruments |
|---|---|
| Origin | France |
| Model | C-RED 2 ER |
| Effective Pixels | 640 × 512 |
| Pixel Size | 15 µm |
| Frame Rate | 600 fps (full frame), up to 32,066 fps (region-of-interest) |
| Spectral Range | 1.1–1.9 µm (C-RED 2 ER 1.9) or 1.2–2.2 µm (C-RED 2 ER 2.2) |
| Read Noise | < 50 e⁻ (1.9 µm version), < 40 e⁻ (2.2 µm version) |
| Cooling | Integrated dual-stage thermoelectric cooler (ΔT ≤ 60 °C vs. ambient) |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | iKon-XL CCD |
| Price Range | USD 13,500 – 68,000 (est.) |
| Effective Pixels | 16.8 Megapixel |
| Pixel Size | 15 × 15 µm |
| Sensor Type | Back-Illuminated CCD (e2v CCD231-84 or CCD230-84) |
| Cooling Method | Thermoelectric (TE) with ColdSpace™ |
| Operating Temperature | −100 °C |
| Quantum Efficiency | Up to 95% (deep-depletion NIR-enhanced) |
| Read Noise | ≤ 2.1 e⁻ |
| Full Well Capacity | 350,000 e⁻ |
| Digitization | 18-bit ADC |
| Interface | USB 3.0 or Fiber Optic |
| Readout Modes | Single-channel or Quad-channel (quadrant-balanced) |
| Brand | Andor Technology (Oxford Instruments) |
|---|---|
| Origin | United Kingdom |
| Model | CB2 24B |
| Sensor Resolution | 5328 × 4608 pixels |
| Effective Pixels | 24.5 MP |
| Pixel Size | 2.74 µm (native), 5.48 µm (on-chip 2×2 binning) |
| Read Noise | 1.3 e⁻ RMS |
| Dark Current | 0.0015 e⁻/pixel/sec at −20°C |
| Frame Rates | 106 fps (8-bit), 74 fps (12-bit), 37 fps (16-bit HDR) |
| Shutter Type | Global Shutter |
| Cooling | Thermoelectric (TE) to −20°C |
| Interface | CoaXPress 2.0 or 10 GigE |
| Compliance | GigE Vision v2.0, GenICam v3.x |
| Lens Mount | C-mount (standard), TFL-mount (optional) |
| Operating Ambient Temperature Range | Certified down to −40°C |
Show next