Physical Property Testing Instruments
Filter
Showing 1681–1710 of 12276 results
| Brand | Concept |
|---|---|
| Origin | United Kingdom |
| Model | UL94 FLAMMABILITY CHAMBER |
| Chamber Volume | >1 m³ |
| Noise Level | 62.5 dB(A) |
| Burner Angle Adjustment | 0°, 20°, 45° |
| Compliant Standards | UL 94, IEC 60695-11-10/20, ASTM D635, ISO 1210, ISO 9772, BS 2782 Method 140A/140B |
| Gas Supply | 98% methane |
| Operating Ambient Temperature | 10–35 °C |
| Electrical Supply | 115–230 V AC, single-phase |
| Key | Origin: Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model | SYD |
| Pricing | Available Upon Request |
| Max Load Options | 30 kN, 50 kN, 100 kN, 200 kN, 300 kN |
| Relative Indication Error | ±1% |
| Hydraulic Pump Rated Pressure | 25 MPa |
| Flexural Roller Diameter | 30 mm |
| Max Spacing Between Lower Rollers | 450 mm |
| Center Distance Between Upper Rollers | 150 mm |
| Center Distance Between Lower Rollers | 450 mm |
| Support Plate Length | 155 mm |
| Max Clearance Between Compression Platens | 230 mm |
| Piston Diameter × Stroke | 125 mm × 80 mm |
| Piston Stroke | 120 mm |
| Motor Power | 0.75 kW |
| Overall Dimensions (L×W×H) | 850 × 600 × 1340 mm |
| Compliance | GB/T 3722 |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model Variants | GS-250, GS-500, GS-1000 |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | 24925-000 |
| Instrument Type | Efflux Viscometer |
| Sample Volume | 75 mL |
| Orifice Distance | 0.5 cm |
| Construction Material | Corrosion-Resistant Stainless Steel |
| Dimensions (L×W×H) | 35.6 × 8.9 × 14 cm |
| Weight | 1.4 kg |
| Compliance | ASTM D1200, ISO 2431, BS 3900-A4, DIN 53211 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 28,000 (FOB) |
| Compliance Standards | MIL-STD-810F, MIL-STD-883C, GJB 150A, GJB 360B, GB/T 2423.15, IEC 60068-2-27 |
| Max Acceleration Range | 30–400,000 g |
| Sample Mounting Radius | 200–1000 mm |
| Specimen Height Limit | 200–300 mm |
| Test Axes | X, Y, Z orthogonal directions |
| Payload Capacity | 5–200 kg |
| Power Supply | AC 380 V, 1.5–6.5 kVA |
| Continuous Operation Duration | 30–60 min |
| Control System | Industrial PC with Real-Time PID Regulation |
| Slip Ring Interface | 15-channel, 500 V / 5 A |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C (configurable models) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| Humidity Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Controller | 7-inch LCD touchscreen, bilingual (English/Chinese) |
| Refrigeration System | Hermetic dual-stage compressor (R404A/R23) |
| Construction | SUS#304 stainless steel interior & exterior |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | CooliBlade |
|---|---|
| Origin | Finland |
| Model | AURORA |
| Construction | Monolithic Aluminum Extrusion with Integrated NEOcore Phase-Change Thermal Channel |
| Thermal Load Capacity | Up to Multi-kilowatt Passive Dissipation |
| Mounting Flexibility | Horizontal or Vertical Integration |
| Compliance | Designed for ISO 9001–certified manufacturing |
| Certifications | CE-marked for industrial equipment integration |
| Brand | CooliBlade |
|---|---|
| Origin | Finland |
| Model | COMET |
| Core Technology | NEOcore® Integrated Heat Channel |
| Max Power Handling | 840 W (COMET Matrix configuration) |
| Material | High-Purity Aluminum |
| Working Fluid | Water-based Hydroxide Compound |
| Length Options | 150 mm (standard), custom lengths available |
| Diameter Options | 50 mm or 70 mm |
| Weight | 260 g (150 mm, Ø70 mm) |
| Mounting Angle Tolerance | ±85° |
| Thermal Resistance | 0.12 K/W (natural convection, 12-module COMET Matrix, Ø70 mm) |
| Lightness | 50% weight reduction vs. conventional aluminum heatsinks |
| Tooling | No mold cost — rapid prototyping from standard modules |
| Design Flexibility | Fully modular platform for iterative thermal architecture development |
| Production Scalability | Direct transition from prototype to volume manufacturing |
| Brand | CooliBlade |
|---|---|
| Origin | Finland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SIRIUS |
| Pricing | Upon Request |
| Thermal Resistance | 0.44–0.77 K/W |
| Max Thermal Channel Length | 500 mm |
| Material | Monolithic Aluminum NEOcore Structure |
| Cooling Mechanism | Passive Two-Phase Heat Transfer (Evaporation–Condensation Cycle) |
| Weight Class | Ultra-Lightweight |
| Design Flexibility | Customizable Fin Angle & 3D Geometry |
| Power Handling Capacity | Hundreds of Watts (Application-Dependent) |
| Compliance | Designed for ISO 9001-certified manufacturing |
| Brand | CooliBlade |
|---|---|
| Origin | Finland |
| Model | ULTIMA |
| Heat Sink Material | Aluminum |
| Working Fluid | Hydrocarbon-based Phase-Change Medium |
| Weight | 2.7 kg |
| Mounting Angle | 0° ±5° |
| Thermal Resistance | 0.028 K/W |
| Max Operating Temperature | 150 °C |
| Operating Temperature Range | −20 °C to +150 °C |
| Ambient Temperature Range | −20 °C to +60 °C |
| Storage Temperature Range | −50 °C to +90 °C |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-1125 |
| Quotation | Upon Request |
| Capacity Options | 10 N to 50 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Displacement Resolution | 1/500,000 full stroke |
| Test Speed Range | 0.01–1000 mm/min (software-controlled) |
| Maximum Stroke | 1200 mm |
| Test Width | 420 mm |
| Drive System | Servo motor with precision ball screw and timing belt transmission |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Rated Power | 750 W |
| Dimensions (W×D×H) | 92 × 62 × 199 cm |
| Weight | ~422 kg |
| Compliance Standards | ISO 7500-1, ASTM E4, JJG 475-88, EN 10002-1, EN 10002-2, DIN 51221, JIS B7721/B7733, BS 1610, GB/T 228.1–2021, GB/T 1449–2005, GB/T 9341–2008, ASTM D6109–2010 |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Arago ε / Arago ω / Arago ∞ |
| Price | Upon Request |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | VASCO |
| Price Range | USD 26,000–39,000 (FOB) |
| Dispersion Method | Wet Dispersion |
| Measurement Range | 0.01–3500 µm |
| Repeatability | <5% |
| Measurement Time | 30 seconds |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | CoreScan / Sherescan |
| Pricing | Available Upon Request |
| Origin | Sweden |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CoreScanner |
| Pricing | Upon Request |
| Key Features | LCD digital temperature & humidity controller |
|---|---|
| Segment duration | 0–999 h 59 min |
| Loop count | 1–999 partial or 0–999 full cycles |
| Chamber material | seamless fiberglass-reinforced plastic (FRP) |
| Interior components | stainless steel, copper, or corrosion/heat-resistant materials |
| Safety protections | leakage current, short circuit, overtemperature, low-water, end-of-test, overcurrent |
| Compliance | GB/T 2423.17–2022, IEC 60068-2-11, ASTM B117, ISO 9227, DIN 50021 |
| Temperature range | +5°C to 55°C |
| Humidity range | 85–95% RH |
| Temp. uniformity | ≤ ±2°C |
| Temp. stability | ≤ ±0.5°C |
| Salt deposition rate | 1–2 mL / 80 cm²·h |
| Spray modes | continuous or cyclic |
| Timer range | 1–999 (s/min/h) |
| Power supply | AC 220V±10% / 380V±10%, 50 Hz |
| Ambient operating conditions | 5–30°C, ≤85% RH |
| Heating system | independent Ni-Cr alloy heaters |
| Spray system | tower-type atomizer with non-crystallizing nozzles |
| Salt solution pre-heating | thermally balanced with chamber air |
| Filtration | inline water filter on suction line |
| Calibration-ready | PT100 platinum resistance sensors, standard funnel & graduated cylinder for deposition measurement |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | COFOMEGRA |
| Pricing | Available Upon Request |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Costech KELVIN Sorptometer 1042 |
| Quotation | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DC24000 UHR |
| Price Range | USD 110,000–138,000 (FOB) |
| Particle Size Range | 5 nm – 75 µm |
| Size Measurement Repeatability | ±0.5% RSD |
| Operating Temperature | Ambient (15–30 °C) |
| Light Source Wavelength | 405 nm (violet diode laser) |
| Measurement Principle | High-Speed Centrifugal Sedimentation (HSCS) |
| Sample Mass Range | 0–10 ng |
| Sample Concentration | Matrix-independent (no dilution requirement) |
| Zeta Potential Capability | Not integrated |
| Typical Analysis Time | 1–3 minutes per run |
| Molecular Weight Determination | Not supported |
| Origin | Unknown |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | CRAWFORD-Type |
| Price | Upon Request |
| Compressed Air Reservoir Capacity | 10 L |
| Max Reservoir Pressure | 200 bar |
| High-Pressure Combustion Vessel Operating Temperature Range | –30°C to +70°C |
| Vessel Volume | 700 mL |
| Max Working Pressure (Vessel) | 250 bar |
| Proof Test Pressure | 350 bar |
| Optional Temperature Control System | CC240 |
| Temp Control Range | –40°C to +200°C |
| Thermal Chamber Volume | 5 L |
| Heating Power | 1.5 kW |
| Cooling Capacity | 1.8 kW (at 0–100°C), 0.8 kW (at –20°C) |
| Max Vacuum Flow Rate | 15 L/min at 0.4 bar |
| Max Positive Flow Rate | 18 L/min at 0.5 bar |
| Construction Materials | Stainless Steel, Ceramic, PTFE |
| Brand | CRYOALL |
|---|---|
| Origin | Beijing, China |
| Model | C15V-Pro |
| Temperature Range | −263 °C to RT (10 K to ~25 °C) |
| Heating Rate | 0–50 K/min |
| Temperature Accuracy | ±0.1 K |
| Sample Length | ≤50 mm |
| Measurement Range | 0–5000 µm |
| Resolution | 0.125 nm |
| Atmosphere Options | Vacuum (1×10⁻⁵ mbar), O₂, N₂, Ar, He, H₂, forming gas |
| Contact Force | 0.01–2.5 N (motorized, programmable) |
| Brand | HEL (UK) |
|---|---|
| Origin | United Kingdom |
| Model | CrystalEYES |
| Temperature Range | −40 °C to 200 °C |
| Detection Principle | Near-Infrared (NIR) Laser Turbidity Sensing |
| pH Monitoring | Integrated Auto-Logging |
| Data Output | CSV/Excel-Compatible Export |
| Software | Real-Time Graphical Acquisition & MSZW Analysis Module |
| Compliance | Designed for GLP/GMP-Aligned Process Development Environments |
| Brand | CSC |
|---|---|
| Origin | USA |
| Model | Bostwick |
| Construction | Stainless Steel |
| Dimensions (L×W×H) | 14 in × 3.5 in × 5.5 in |
| Sample Volume | 75 mL |
| Timing Interval | Standard 30 s |
| Scale Graduation | 0.5 cm |
| Leveling | Dual adjustable leveling screws + bubble level |
| Gate Mechanism | Spring-loaded instantaneous release gate |
| Compliance | ASTM D1682 (for consistency testing), ISO 11393-2 (food texture reference), USDA/FSIS guideline compatible |
| Application Scope | Semi-solid food products with yield stress behavior |
| Brand | CSC |
|---|---|
| Origin | USA |
| Model | Bostwick Consistometer |
| Instrument Type | Flow-Through Consistometer (Capillary-Free Gravitational Flow Viscometer) |
| Construction | Stainless Steel Body with Electrolytically Polished 2 mm Steel Ramp |
| Sample Volume | 75 mL |
| Dimensions (L×W×H) | 14 in × 3.5 in × 5.5 in |
| Scale Resolution | 0.5 cm graduations |
| Leveling | Dual adjustable leveling screws + bubble level |
| Flow Gate | Spring-loaded instantaneous release gate |
| Compliance | SNT 1036–2002 (China Export Standard for Tomato Paste), ASTM D1824–22 (Standard Test Method for Consistency of Semisolid Materials), ISO 10985:2021 (Foodstuffs — Determination of Flow Behaviour Using Bostwick Consistometer) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | CSC |
| Price Range | USD 140–1,400 (FOB) |
| Instrument Type | Efflux Viscometer |
| Viscosity Range | 0.1–1000 Pa·s (equivalent shear-thinning semi-solids, calibrated via standardized efflux time) |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | CSL-II |
| Pricing | Upon Request |
| Maximum Operating Temperature | 1700 °C (short-term up to 1750 °C) |
| Temperature Uniformity in Soak Zone | ±1 °C |
| Ramp Rate | 0–10 °C/min (programmable) |
| Hold Temperature Accuracy | ±2 °C |
| Control System | 50-Step Intelligent PID Programmable Controller |
| Power Rating | 6–36 kW |
| Interface | RS485/RS232 or Ethernet for PC Integration |
| Compliance | Designed per GB/T 5988–2007 “Test Method for Reheating Linear Change of Dense Shaped Refractory Products” |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance Standards | GB/T 2423.17–1993, IEC 60068-2-11, ASTM B117, MIL-STD-810H, DIN 50021 |
| Temperature Range | +10°C to +65°C |
| Humidity Range | 30–98% RH |
| Salt Fog Concentration | 5% NaCl (by weight), pH 6.5–7.2 |
| Chamber Sealing | Water-Sealed Lid Design |
| Construction Material | Fiberglass-Reinforced Polymer (FRP) Monocoque Body |
| Internal Accessories | Stainless Steel V-Type Sample Racks, Dual Precision Nozzles, Calibrated Funnel Assembly |
| Safety Protections | Overtemperature, Low-Water Level, Leakage Current, Short-Circuit, Overcurrent, End-of-Test Auto-Shutdown |
| Brand | Custom OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5–98% RH |
| Temp. Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Ramp Rate | +4.0 °C/min (heat), −1.0 °C/min (cool) |
| Humidity Resolution | 0.1% RH |
| Temp. Resolution | 0.1 °C |
| Vibration Interface | Integrated electrodynamic or servo-hydraulic shaker mounting with dynamic load transfer optimization |
| Controller | 7″ TFT LCD touchscreen, embedded real-time OS, programmable profiles (sine, random, swept-sine, resonance dwell), RS-232/RS-485, optional Ethernet & USB data export |
| Safety Systems | Dual-stage compressor high/low pressure cut-off, over-temperature/over-humidity protection, phase failure detection, water shortage alarm, redundant thermal fuses, fault logging with timestamped event history |
| Key | Table Surface Dimensions: 500 × 500 mm |
|---|---|
| Vibration Axes | Dual-axis (horizontal + vertical) |
| Max Payload | 100 kg |
| Frequency Range | 1–600 Hz |
| Sweep Frequency Range | 1–600 Hz |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Max Acceleration | 20 g (rms) |
| Time Control Resolution | 1 second (programmable up to 1 year) |
| Waveforms | Sine, Half-sine |
| Drive Power | 2.2 kVA |
| Input Voltage | 220 V ±10% AC, 50/60 Hz |
| Max Current Draw | 5 A |
| Frequency Display Resolution | 0.01 Hz |
| Shaker Body Dimensions (vertical unit) | 500 × 500 × 160 mm |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,600 (FOB, indicative only — final quotation subject to configuration, certification, and delivery terms) |