Physical Property Testing Instruments
Filter
Showing 1741–1770 of 12277 results
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −40 °C to +130 °C |
| Humidity Range | 20 %RH to 98 %RH |
| Temperature Uniformity | ±2 °C |
| Humidity Uniformity | ±3.0 %RH (steady-state) |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Fluctuation | ±2.5 %RH (steady-state) |
| Heating Rate | ~2.5 °C/min (air, no-load, non-linear) |
| Cooling Rate | ~1 °C/min (air, no-load, non-linear) |
| Internal Dimensions (W×D×H) | 3000 × 1000 × 2000 mm |
| External Dimensions (W×D×H) | 3800 × 1300 × 2450 mm |
| Door | Single outward-opening, 1000 × 1900 mm |
| Observation Windows | Front (300 × 450 mm), Left Side (500 × 450 mm) |
| Refrigeration | Mechanical compression refrigeration with water-cooling |
| Power Supply | 380 V ±10 %, 50/60 Hz |
| Total Power Consumption | ~30 kVA |
| Heat Load Capacity | 8.5 kW |
| Compliance | GB10589, GB10592, GB10586, GB11158, GB2423.1–GB2423.4, GB2423.22, GB/T5170.2, GB/T5170.5 |
| Temperature Range | -40 °C to +100 °C |
|---|---|
| Humidity Range | 30–98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤2 °C |
| Humidity Deviation | +2 to –3 %RH |
| Ramp Rate | 0.5–1.2 °C/min |
| Compliance | GB10589, GB10592, GB11158, GB/T5170.2, GB/T5170.5, GB2423.1/2/22, GB2424.1 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -60°C to 100°C, -35°C to 100°C, or -20°C to 100°C |
| Humidity Range | 15–95% RH |
| Temperature Stability | ±0.5°C |
| Humidity Stability | ±2% RH |
| Temperature Uniformity | ±2°C |
| Humidity Uniformity | ±3% RH |
| Temperature/Humidity Deviation | ≤±2°C / ≤±3% RH |
| Refrigerant | R404A & R23 (Zero Ozone Depletion Potential, HFC-based) |
| Construction | Modular PU-insulated sandwich panels |
| Inner Wall | SUS304 stainless steel |
| Outer Wall | Color-coated steel sheet |
| Structural Frame | Standard galvanized angle iron & channel steel |
| Cooling System | Hermetic or semi-hermetic compressors with finned-tube evaporator (serving dual function as dehumidifier) |
| Heating System | Stainless steel finned-tube electric heaters |
| Humidification System | Stainless steel sheathed steam generator |
| Safety Protections | Fuseless overcurrent protection, compressor overheat/overpressure/overcurrent cutoff, dry-run protection for heaters & humidifiers, low-water-level alarm, explosion-proof interior lighting, power failure memory function |
| Controller | Large LED display, multi-function programmable controller with data logging capability (optional RS485/USB/Ethernet interface) |
| Standard Port | One φ50 mm test port |
| Power Supply | AC 3-phase 5-wire 380 V / 50 Hz |
| Air Delivery | Ceiling-mounted low-velocity laminar airflow design |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable |
| Price | USD 2,600–12,500 (FOB, based on configuration) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | –70 °C to +150 °C (selectable sub-ranges: 0 °C/+150 °C |
| Humidity Range | 20–98 %RH (optional: 5–98 %RH or 10–98 %RH) |
| Heating Rate | ≥4.0 °C/min (typical, 25 °C to +150 °C) |
| Cooling Rate | ≥1.0 °C/min (typical, 25 °C to –40 °C) |
| Temperature Uniformity | ±0.5 °C (at steady state, per IEC 60068-3-5) |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2.0 °C |
| Humidity Fluctuation | +2 to +3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Refrigeration System | Dual-stage hermetic scroll compressors (EU/US-sourced), R404A/R23 cascade refrigerant blend |
| Controller | 7-inch color TFT LCD touchscreen, programmable logic controller (PLC)-based, bilingual (English/Chinese) interface with real-time trend logging |
| Construction | Interior & exterior chambers fabricated from SUS#304 stainless steel |
| Viewing Window | Triple-layer insulated tempered glass with integrated ITO conductive film for anti-fog operation |
| Test Port | One Ø50 mm pass-through port (left side), sealed with silicone gasket |
| Safety Systems | Over-temperature, over-humidity, compressor high-pressure, phase failure, motor overload, and door-open interlock protection |
| Compliance | Fully engineered to meet IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-30 (Cyclic Damp Heat), MIL-STD-810H Method 502.7 / 501.7 / 507.6, GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.3–2016, GB/T 2423.4–2008, GJB 150.3A–2009, GJB 150.4A–2009, GJB 150.9A–2009 |
| Key | Brand: OEM/ODM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Temp. Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temp. Stability | ±2.0°C |
| Humidity Stability | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Construction | Interior & Exterior – SUS#304 Stainless Steel |
| Viewing Window | Multi-layer laminated tempered glass with conductive ITO film |
| Test Port | Ø50 mm (left-side, sealed) |
| Compressor | Original European/American fully-hermetic low-noise dual-stage unit |
| Refrigerant | R404A/R23 (environmentally compliant) |
| Controller | Full-color touchscreen HMI with EN/CN language toggle |
| Compliance | MIL-STD-810G (Method 501.6, 502.6), IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-78 (Steady-State Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993, GJB 150.3–1986, GJB 150.4–1986 |
| Key | Max Load: 100 kg (customizable) |
|---|---|
| Frequency Range | 1–5000 Hz (0.01 Hz resolution) |
| Sweep Range | 1–5000 Hz (duration: 1 s to 30 days) |
| Peak-to-Peak Amplitude | 0–5 mm |
| Max Acceleration | 20 g |
| Vibration Axes | Vertical + Horizontal |
| Waveform | Sinusoidal |
| Programmable Segments | Up to 15 segments, each with user-defined frequency/time |
| Octave Sweeps | 5-segment logarithmic (low→high, high→low, low→high→low, repeatable) |
| Table Surface | 50 × 50 cm (customizable) |
| Cabinet Dimensions (Vertical Mode) | 50 × 20 × 50 cm (L×H×W) |
| Power Supply | 220 V ±20%, 5 A, 2.2 kW |
| Control Modes | Programmable, sweep, logarithmic, octave, amplitude/acceleration regulation, time-based termination |
| Compliance | Designed for IEC 60068-2-6, IEC 60068-2-64, MIL-STD-810H, ISO 16750-3, GB/T 2423.10, GB/T 2423.3, GB/T 2423.17 |
| Origin | Imported |
|---|---|
| Manufacturer Type | Distributor |
| Model | Cylindrical-on-Cylindrical Tribometer |
| Pricing | Upon Request |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Frequency Range | 1–5000 Hz |
| Max. Acceleration | <20 g |
| Max. Displacement (p-p) | 0–5 mm |
| Load Capacity | 100 kg |
| Vibration Waveform | Sine (Half- or Full-Cycle) |
| Axis Configuration | Vertical + Horizontal (Dual-Axis Simultaneous or Independent Control) |
| Control Resolution | Frequency ±0.1 Hz, Display Resolution: 0.01 Hz |
| Power Supply | AC 220 V ±10% / 50 Hz or AC 380 V ±10% / 50 Hz |
| Operating Temperature | 5–40 °C (24-hr avg ≤25 °C) |
| Relative Humidity | ≤85% RH |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | D-1A |
| Price Range | USD 4,200 – 7,000 (FOB) |
| Temperature Range | Ambient to 300°C |
| Heating Rates | 0.2, 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0 °C/min |
| Temperature Repeatability | ±0.5°C at <200°C |
| Temperature Accuracy | ±0.1°C (calibrated against NIST-traceable reference) |
| Temperature Resolution | 0.1°C |
| Instrument Weight | 11 kg |
| Compliance | GB/T 8728–1988, ASTM E342, ASTM D36, ISO 4625, DIN 51801 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-PSA14 |
| Quotation | Available Upon Request |
| Chamber Internal Dimensions | 710 × 540 × 600 mm (W×D×H) |
| Specimen Size | 120 × 200 mm (custom sizes available) |
| Air Pressure Range | 0–0.8 MPa (adjustable) |
| Nozzle Bore Diameter | 10.0 ± 0.1 mm |
| Air Orifice Diameter | 4 mm |
| Nozzle Assembly Length (incl. diffuser tube) | 111 mm |
| Distance from Nozzle Tip to Top Cover | 115 mm |
| Specimen Mounting Angle | 30° (flat-panel configuration) |
| Dust Extraction Fan | 370 W, 220 V, 50 Hz |
| Dust Collection Bin | 1 unit |
| Spray Gun | 1 unit |
| Observation Window | 1 unit |
| Brand | DahoMeter |
|---|---|
| Origin | Guangdong, China |
| Model | DA-300M109 |
| Instrument Type | Laboratory Benchtop Buoyancy-Based Density Meter |
| Sample Type | Solids (Rubber, Elastomers, Polymers, Composites, Ceramics, Metals, Powders) |
| Density Range | 0.001–99.999 g/cm³ |
| Density Resolution | 0.001 g/cm³ |
| Temperature Range | 0.0–100.0 °C |
| Minimum Sample Mass | 0.005 g |
| Maximum Capacity | 300 g |
| Measurement Medium | Water or User-Defined Liquid |
| Compliance | ASTM D297, GB/T 533, GB/T 9867, DIN 53516, ISO 4649, GB/T 1689, ISO 1817 |
| Data Output | RS-232C interface |
| Additional Functions | DIN Abrasion Volume, Akron Abrasion Loss, ARI Index, Volume Expansion Ratio, Foaming Ratio, Mass/Volume Change Rate, Binary Mixture Composition Estimation, Pass/Fail Auto-Judgment |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Denmark |
| Model | Q-300 |
| Measurement Dimensions | 1D/2D/3D |
| Maximum Field of View | 200 mm × 300 mm |
| Displacement Resolution | 0.03–0.1 µm (adjustable) |
| Strain Range | 0.005%–100% |
| Contactless Operation | Yes |
| Application Domain | Full-field deformation, displacement, strain, and defect detection |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Germany |
| Model | Q-400 |
| Measurement Dimensions | 2D & 3D |
| Measurable Area | 10 mm × 10 mm to 5 m × 5 m |
| Displacement Resolution | 1 µm |
| Strain Resolution | 0.005% |
| Compliance | ISO/IEC 17025-aligned calibration traceable to PTB (Physikalisch-Technische Bundesanstalt) |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Germany |
| Model | Q-400TCT |
| Measurement Dimensions | 2D & 3D |
| Measurement Area | 20 mm × 20 mm to 250 mm × 250 mm |
| Displacement Resolution | 1 µm |
| Strain Range | 0.005% – 100% |
| Temperature Control Stage | −40 °C to +300 °C |
| Heating/Cooling Rate | up to 50 °C/min |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Germany |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | Q-400μDIC |
| Pricing | Available Upon Request |
| Measurement Dimensions | 2D & 3D |
| Measurement Area | 0.1 mm × 0.1 mm to 17 mm × 17 mm |
| Displacement Resolution | 1 µm |
| Strain Resolution | 0.005% |
| Application Focus | Microelectronics, Biomaterials, Thermal Expansion Analysis, Warpage Characterization |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Germany |
| Model | Q-450 |
| Measurement Dimensions | 2D & 3D |
| Frame Rate | Up to 20 kHz |
| Measurable Area | 70 mm × 50 mm to 1000 mm × 1000 mm (scalable from mm² to m²) |
| Displacement Accuracy | ±1 µm |
| Strain Accuracy | ±0.005% |
| Contactless Operation | Yes |
| Application Focus | High-frequency vibration, transient deformation, dynamic strain mapping |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Germany |
| Model | Q-480 |
| Distribution Status | Authorized Distributor |
| Origin Category | Imported |
| Pricing | Upon Request |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Germany |
| Model | Q-800 |
| Excitation Compatibility | Thermal, Vacuum, Vibration |
| Measurement Principle | Laser Speckle Shearing Interferometry |
| Field of View | Configurable from 10 × 10 cm to 2 m² |
| Acquisition Time | ≤30 s per 2 m² area |
| Compliance | NAS410 / EN4179 certified methodology |
| Target Materials | CFRP, aluminum alloys, honeycomb composites, bonded structures |
| Defect Sensitivity | Delaminations, disbonds, wrinkles, impact damage, core crush, foreign object inclusions, voids, moisture ingress, repair anomalies |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Germany |
| Model | Q-810 |
| Type | Full-Field, Non-Contact Optical Shearography NDT System |
| Compliance | Designed for ASTM E2657, ISO 12718, and EN 13715-compliant shearographic inspection workflows |
| Application Scope | In-situ, large-area structural integrity assessment of composite and metallic components |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Germany |
| Model | RTSS Q-410 |
| Measurement Principle | Digital Image Correlation (DIC)-based Real-Time Strain Sensing |
| Sampling Rate | Up to 4,000 Hz |
| Output Interface | Analog (±10 V) and Digital (Ethernet, TTL Sync) |
| Compliance | CE, RoHS |
| Supplier Status | Authorized Distributor |
| Origin Category | Imported Instrument |
| Brand | Dantec |
|---|---|
| Origin | Germany |
| Model | Q-300 TCT |
| Measurement Dimensions | 1D/2D/3D |
| Measurable Area | 0.7 mm × 1 mm to 40 mm × 50 mm |
| Displacement Resolution | 0.01–0.1 µm (adjustable) |
| Strain Range | 0.005%–100% |
| Heating Capability | Up to 300 °C, 200 W power, ramp rate 30 °C/min |
| Brand | Dantsin |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Galieo |
| Pricing | Upon Request |
| Brand | Das-Nano |
|---|---|
| Origin | Spain |
| Model | ONYX |
| Measurement Principle | Pulsed Terahertz Time-Domain Spectroscopy (THz-TDS) |
| Sample Area Range | 10 × 10 mm² to 200 × 200 mm² (customizable up to m² scale) |
| Spatial Resolution | 50 µm |
| Measurement Speed | up to 12 cm²/min |
| Output Parameters | DC conductivity (σ<sub>DC</sub>), carrier concentration (N<sub>s</sub>), drift mobility (μ<sub>drift</sub>), scattering time (τ<sub>sc</sub>), DC resistivity (R<sub>DC</sub>), surface uniformity maps |
| Compliance | Supports GLP/GMP-aligned data audit trails |
| Brand | Davenport |
|---|---|
| Origin | USA |
| Model | DC/02 |
| Compliance | ASTM D1505-68, ISO 1183, BS 2782 Part 6 Method 620D |
| Operating Temperature | 23 °C ± 0.1 °C |
| Gradient Column | Cylindrical borosilicate glass tube |
| Calibration Reference | Set of 9 precision density marker floats (equally spaced in density) |
| Thermal Control | Integrated heating circuit + passive cooling coil |
| Application Scope | Solid plastics, thermoplastics, elastomers, and rigid polymer specimens |
| Brand | Davenport |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | DC02 |
| Pricing | Upon Request |
| Industry Application | General-Purpose Solid Density Analysis |
| Instrument Type | Density Gradient Column |
| Form Factor | Benchtop Laboratory System |
| Sample Type | Solid Particles (e.g., Plastic Pellets, Powders, Granules) |
| Density Range | 0.8000–1.5999 g/mL |
| Density Resolution | 0.0001 g/mL |
| Temperature Control | 23.0 ± 0.1 °C (Stabilized via Integrated Heating/Cooling Loop) |
| Minimum Sample Mass | 1 g |
| Brand | Davenport |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | PET Plus |
| Pricing | Available Upon Request |
| Brand | Davenport |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | PETPlus |
| Pricing | Available Upon Request |
| Brand | DAZHAN |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Domestic Instrument Manufacturer |
| Model | DZ-DSC101 |
| Sample Capacity | Single-sample configuration |
| Instrument Type | Differential Scanning Calorimeter (DSC) |
| Temperature Range | Ambient to 800 °C |
| Temperature Accuracy | ±0.001 °C |
| Temperature Precision | ±0.001 °C |
| Heating/Cooling Rate | 0.1–100 °C/min |
| DSC Signal Range | ±800 mW |
| Temperature Control Method | Digital PID algorithm with programmable ramp-hold-cool profiles |
| Sensor Material | Constantan-based thermocouple array |
| Atmosphere Control | Dual-gas switching system with integrated flow regulation and auxiliary purge gas inlet |
| Cooling Method | Forced-air cooling |
| Compliance | Designed for GLP-compliant thermal analysis workflows |
| Brand | DAZHAN |
|---|---|
| Origin | Jiangsu, China |
| Model | DZ-DSC300 |
| Temperature Range | Ambient to 600 °C |
| Heating/Cooling Rate | 0.1–100 °C/min |
| DSC Signal Range | 0–±800 mW (expandable) |
| Temperature Stability | ±0.01 °C |
| Temperature Resolution | 0.001 °C |
| Programmable Segments | Up to 6 heating/holding/cooling steps |
| Atmosphere Control | Dual-gas auto-switching (0–200 mL/min, ≤0.5 MPa) |
| Data Interface | Standard USB |
| Display | 7-inch 24-bit color LCD touchscreen |
| Calibration Standards Included | Indium, Tin, Lead |
| Power Supply | AC 220 V / 50 Hz (customizable) |
| Brand | DAZHAN |
|---|---|
| Origin | Jiangsu, China |
| Model | DZ-DSC300C |
| Temperature Range | −40 to 600 °C |
| Heating/Cooling Rate | 0.1–100 K/min (heating), 0.1–40 K/min (cooling) |
| DSC Signal Range | 0–±800 mW (expandable) |
| Temperature Stability | ±0.01 °C |
| Temperature Resolution | 0.001 °C |
| DSC Sensitivity | 0.001 mW |
| Atmosphere Control | Dual-gas auto-switching (up to 200 mL/min, ≤0.5 MPa), plus dedicated purge gas inlet |
| Thermal Program | Up to 6-segment ramp/hold |
| Display | 7-inch 24-bit color LCD touchscreen |
| Interface | Standard USB with auto-reconnect capability |
| Power Supply | AC 220 V / 50 Hz (customizable) |
| Calibration Standards Included | Indium, Tin, Lead |