Generic
Filter
Showing 2041–2070 of 5744 results
| Origin | Beijing |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Pricing | Available Upon Request |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Detection Principle | Catalytic Combustion |
| Model Variant | HK-7100A (Catalytic Bead Configuration) |
| Pricing | Available Upon Request |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | Digital Multi-Principle Gas Detector Platform (5 Sensing Technologies) |
| Pricing | Upon Request |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HK-7200A |
| Price | Upon Request |
| Detection Principle | Metal Oxide Semiconductor (MOS) |
| Display | OLED, Bilingual (Chinese/English) |
| Operating Temperature | -40 °C to +70 °C |
| Atmospheric Pressure Range | 86–106 kPa |
| Measurement Range Options | 0–100 ppm, 0–200 ppm, 0–500 ppm, 0–1000 ppm, 0–2000 ppm |
| Resolution | 1 ppm |
| Accuracy | ±5% FS |
| Response Time (T90) | ≤30 s |
| Alarm Output | Dual-level visual (LED) and relay |
| Signal Outputs | 4–20 mA, CAN bus, RS485 |
| Transmission Distance | 4–20 mA ≤1000 m (2.5 mm² cable), CAN ≤10 km, RS485 ≤1.2 km |
| Power Supply | DC 18–30 V |
| Wiring | 3-wire or 4-wire configuration |
| Power Consumption | ≤2 W |
| Explosion Protection | Ex d IIC T6 Gb |
| Ingress Protection | IP66 |
| Compliance Standard | GB 12358–2006 |
| Sampling Method | Natural diffusion |
| Sensor Interface | Hot-swappable, plug-and-play MOS sensor module |
| Firmware Architecture | 32-bit embedded microcontroller |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HK-7200A Digital Multi-Principle Gas Detector |
| Pricing | Available Upon Request |
| Detection Principle | Photoionization (PID) |
| Measurement Range | 0–20 ppm, 0–100 ppm, 0–200 ppm, 0–500 ppm, 0–1000 ppm, 0–2000 ppm |
| Resolution | 1 ppm |
| Accuracy | ±3% FS |
| Response Time (T90) | ≤30 s |
| Operating Temperature | −40 to +55 °C |
| Atmospheric Pressure Range | 86–106 kPa |
| Output Signals | 4–20 mA, CAN Bus, RS485 |
| Max Transmission Distance | 1000 m (4–20 mA, 2.5 mm²), 10 km (CAN), 1.2 km (RS485) |
| Supply Voltage | DC 18–30 V |
| Wiring | 3-wire or 4-wire |
| Power Consumption | ≤2 W |
| Explosion Protection | Ex d IIC T6 Gb |
| Ingress Protection | IP66 |
| Compliance Standard | GB 12358–2006 |
| Display | High-brightness OLED, bilingual Chinese/English interface |
| Operation Modes | Magnetic stylus & bidirectional infrared remote |
| Sensor Interface | Hot-swappable, auto-diagnostic, multi-principle sensor platform (PID, electrochemical, catalytic bead, infrared, MOS) |
| Compatible Gases | VOCs and selected toxic gases (e.g., benzene, toluene, xylene, styrene, acetone, isopropanol, chlorinated hydrocarbons) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HKCube 1 |
| Pricing | Available Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | HKCube Range 1 |
| Pricing | Available Upon Request |
| Origin | Canada |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HKiPORT CL-GigE |
| Price Range | USD 1,400 – 4,200 (FOB) |
| Operating Temperature | -40°C to +60°C |
| Interface Compatibility | Camera Link Base (26-pin MDR), GigE Vision v2.0 compliant |
| Power Delivery | PoCL (Power over Camera Link) support |
| GPIO | 4-channel opto-isolated digital I/O |
| Form Factor | External ruggedized enclosure (industrial grade) |
| SDK | eBUS SDK v5.3+ (Windows/Linux x64, C/C++, .NET, Python bindings) |
| Certification | CE, FCC Class A, RoHS compliant |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | HL-2N |
| Price | USD 320 (FOB Shanghai) |
| Flow Rate Range | 0.5–900 mL/h |
| Max. Pressure | 3 kgf/cm² (≈294 kPa) |
| Dimensions | 120 × 120 × 180 mm |
| Speed Control | Stepless (HL-1), Digital Display with Mechanical Variable-Speed Drive (HL-1B/HL-1D), PTFE Pump Head (HL-1S) |
| Power Supply | AC 220 V, 50 Hz |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Model | HL-1B |
| Price | USD 280 (approx.) |
| Dimensions | 120 × 120 × 180 mm |
| Channel Count | Single |
| Flow Rate Range | 0.5–600 mL/h |
| Maximum Back Pressure | ≥3 kg/cm² (≈294 kPa) |
| Speed Range | 0–50 rpm (digital display, stepless speed control) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model Variants | HL-2 / HL-2S / HL-2D |
| Flow Rate Range | 0.5–900 mL/h per channel |
| Speed Range | 0–65 rpm (digital display, stepless adjustment) |
| Pressure Rating | 3 kg/cm² (≈294 kPa) |
| Channel Configuration | Dual-channel (HL-2D/HL-2B) |
| Timer Range | 1–20 hours |
| Power Supply | AC 220 V, 50 Hz |
| Pump Head Material Options | Silicone tubing (standard), PTFE-lined tubing (HL-2S variant) |
| Compliance | Designed for general laboratory use under ISO/IEC 17025-aligned operational conditions |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HL-2D |
| Price | USD 320 (FOB Shanghai) |
| Flow Range | 2 × (0.3–900) mL/h |
| Pressure Rating | ≥3 kg/cm² (≈294 kPa) |
| Timing Range | 1 min – 19 h 59 min |
| Display | Dual-channel speed and timer digital display |
| Dimensions (L×W×H) | 120 × 120 × 180 mm |
| Weight | 3 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HL-2E |
| Instrument Type | Peristaltic Pump |
| Flow Rate Range | 0–900 mL/h per channel (2× independent channels) |
| Speed Range | 0–65 rpm (continuous adjustment) |
| Filling Mode Speed Range | 0–60 rpm |
| Maximum Back Pressure | ≥3 kgf/cm² |
| Drive System | Microstepping Stepper Motor with Precision Control Circuitry |
| Interface | Touch-Sensitive Membrane Keypad |
| Noise Level | Low (<45 dB(A) at 1 m) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HL-3 |
| Flow Rate Range | 60–10,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² |
| Pump Head Dimensions | 120 × 120 × 180 mm |
| Controller Dimensions | 260 × 200 × 120 mm |
| Drive Type | Stepless Mechanical Speed Control (Non-Variable Frequency Drive) |
| Channel Configuration | Single-Channel, Modular (Pump Head and Controller Separately Mounted) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model | HL-3A |
| Price | USD 435 (FOB Shanghai) |
| Pump Dimensions | 120 × 120 × 180 mm |
| Controller Dimensions | 260 × 200 × 120 mm |
| Flow Range | 60–12,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² (≈196 kPa) |
| Speed Range | 0–155 rpm (digital speed display, stepless electronic speed control) |
| Channel Configuration | Single-channel, split-pump design (pump head and controller physically separated) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Regional Origin | Domestic (China) |
| Model | HL-4A |
| Price | USD 695 |
| Flow Rate | 0.12–24 L/h |
| Maximum Back Pressure | ≥2 kg/cm² (≈196 kPa) |
| Dimensions (Pump Head) | 240 × 280 × 170 mm |
| Operating Mode | Continuous or Timed Delivery |
| Drive Type | Brushless DC Motor with Analog/Manual Speed Control |
| Tubing Compatibility | Standard silicone or Tygon® tubing (ID 1.6–3.2 mm typical) |
| Certifications | CE-marked for laboratory use |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HL-4B |
| Price | USD 480 (FOB Shanghai) |
| Pump Unit Dimensions | 120 × 120 × 180 mm |
| Controller Dimensions | 260 × 200 × 120 mm |
| Channel Configuration | Single-Channel (Separate Pump Head & Controller) |
| Flow Rate Range | 60–18,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² (≈0.2 MPa) |
| Speed Range | 0–155 rpm (Digital RPM Display, Continuously Variable Speed Control) |
| Timing Function | Not included (HL-4D variant only) |
| Compliance | CE-marked per EN 61000-6-3 (EMC) and EN 61000-6-2 (Immunity) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HL-4D |
| Price | USD 605 |
| Pump Dimensions | 120 × 120 × 180 mm |
| Controller Dimensions | 260 × 250 × 120 mm |
| Flow Rate Range | 60–18,000 mL/h |
| Maximum Back Pressure | ≥0.2 MPa (≥2 kgf/cm²) |
| Speed Control | 0–155 rpm (digital display, stepless mechanical adjustment) |
| Timer Range | 1 s – 99 min 59 s |
| Stop Delay Range | 1 s – 99 min 59 s |
| Channel Configuration | Single-channel, modular (pump head and controller separated) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-5 / HL-6 (including HL-5A, HL-5B, HL-6B, HL-6D variants) |
| Flow Range | 0.2–150 L/h |
| Max Pressure | ≥2 kg/cm² (≈196 kPa) |
| Dimensions | 240 × 280 × 170 mm |
| Display | Digital Speed Readout (HL-5B, HL-6B, HL-6D) |
| Control Features | Memory Recall, Wide-Speed Adjustment, Timer & Fill Mode (HL-6D only) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-5A |
| Flow Rate Range | 5,000–200,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² (≈196 kPa) |
| Dimensions (W×D×H) | 240 × 280 × 170 mm |
| Control Interface | Microprocessor-Based Digital Display with Speed Memory Function |
| Channel Configuration | Single-Channel |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-5B |
| Flow Rate Range | 200–100,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² (≈0.2 MPa) |
| Display | Digital Speed Readout (rpm) |
| Dimensions (W×D×H) | 240 × 280 × 170 mm |
| Power Supply | AC 220 V, 50/60 Hz |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-6 |
| Dimensions (W×D×H) | 240×180×170 mm |
| Channel Count | 1 |
| Flow Rate Range | 2000–150,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² |
| Control Interface | Microprocessor-Based Speed Display & Memory |
| Speed Adjustment | Wide-Range Analog/Digital Input |
| Compliance | Designed for industrial fluid handling per ISO 8573-1 (compressed air purity) and IEC 61000-6-2/6-4 (EMC immunity/emission) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-6B |
| Flow Rate Range | 2000–150,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² |
| Dimensions (W×D×H) | 240 × 280 × 170 mm |
| Display | Digital LED Speed Readout |
| Control Mode | Manual Speed Adjustment with Memory Function |
| Timing Capability | None (HL-6B variant) |
| Channel Count | Single |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-6D |
| Price | USD 940 (FOB Shanghai) |
| Dimensions | 240 × 280 × 170 mm |
| Flow Rate | 2,000–150,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² (≈196 kPa) |
| Speed Display | Digital RPM readout |
| Timer Range | 1 second to 100 minutes (start/stop & total run time) |
| Stop Delay | 1 second to 100 minutes |
| Operating Modes | Continuous, Timed Run, Volume Dispensing (Fill Mode), Memory Recall for Last Settings |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HLA-10LP |
| Price Range | USD 140–7,200 |
| Hydrocarbon Removal Principle | Catalytic Oxidation + Dual-Stage Adsorption |
| Output Flow Rate | 0–10 L/min |
| Output Pressure | 0–0.5 MPa |
| Total Hydrocarbon Content (THC) | ≤0.1 ppm (v/v) |
| Dew Point | –40 °C (at 0.5 MPa, verified per ISO 8573-1:2010 Class 2.2.2) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HLD5000 |
| Pricing | Available Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HLN-10LG |
| Pricing | Available Upon Request |
| Purity | >95.995% N₂ |
| Flow Rate | 0–10 L/min |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max. Power Consumption | 80 W |
| Operating Environment | 10–40 °C, ≤85% RH |
| Warranty | 1-year system warranty |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | HLN-1L |
| Pricing | Available Upon Request |
| Purity | >99.999% N₂ |
| Flow Rate | 0–1 L/min |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max. Power Consumption | 185 W |
| Operating Ambient | 10–40 °C, RH ≤85%, non-corrosive, low-dust environment |
| Warranty | 1-year system warranty |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HLP-H2 |
| Price | USD 12,200 (FOB) |
| Sensor Technology | Temperature-Compensated Constant-Temperature Thermal Conductivity Cell (ADEV-SRL) |
| Measurement Ranges | H₂ in Air: 90–100% vol |
| CO₂ (or N₂) in Air | 0–100% vol |
| H₂ in CO₂/N₂ | 0–100% vol |
| Accuracy | ±0.1% FS |
| Repeatability | ±0.1% FS |
| Response Time | 5–15 s |
| Operating Pressure | 0–1 MPa |
| Sample Flow Rate | 100–300 mL/min |
| Power Supply | AC 220 V / Rechargeable Li-ion Battery (≥4 h continuous operation) |
| Ambient Temperature Range | −30 to +50 °C |
| Data Storage | 50 measurement records |
| Display | Backlit Graphic LCD with Menu Navigation |
| Interface | USB 1.1 (PC connectivity & report export) |
| Dimensions | 258 × 240 × 88 mm |
| Weight | 2.5 kg |
| Accessories | Foam-lined portable carry case |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HM-04Ⅱ |
| Pricing | Available Upon Request |
| Sample Tube Quantity | 4 |
| Tube Material | Gold-Plated Stainless Steel |
| Tube Dimensions | φ60 × 56 mm (160 mL) |
| Heating Block Material | Aluminum |
| Heating Method | Resistive Heating |
| Temperature Range | Ambient to 200 °C |
| Purge Gas | Helium or CO₂ |
| Purge Flow Rate | 20–200 mL/min |
| Heater Unit Dimensions | 285(W) × 310(D) × 225(H) mm |
| Heater Unit Weight | 21.5 kg |
| Controller Dimensions | 320(W) × 320(D) × 215(H) mm |
| Controller Weight | 11 kg |
| Power Supply | 100 V / 10 A |
| Optional Accessories | Water-Cooled Circulation Unit, Cross-Compatibility Adapter for Third-Party Sorbent Tubes |