NIPPON DENSHOKU
Filter
Showing 1–30 of 33 results
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | ASA-2 |
| Type | Benchtop Color Difference Meter |
| Optical Geometry | 0°/0° (d/8° equivalent per JIS Z 8722) |
| Light Source | 12 V, 50 W Halogen Lamp |
| Spectral Range | 400–700 nm (20 nm interval) |
| Repeatability | ΔE*ab ≤ 0.10 (20 consecutive measurements at 10 s intervals) |
| Sample Aperture | Incident 1 mm × 3 mm |
| Output Diameter | φ2 mm (Type A), φ3 mm (Type B) |
| Compliance | JIS Z 8722, ASTM E308 |
| Illuminants | A, C, D65, F6, F8, F10 |
| Observer Angles | 2° and 10° |
| Measured Parameters | XYZ, L*a*b*, ΔL*a*b*, L*C*h*, L*u*v*, Hunter Lab, YI, WI, spectral transmittance distribution |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | COH7700 |
| Product Type | Spectrophotometric Color & Haze Analyzer |
| Instrument Type | Benchtop |
| Optical Geometry | d/8° integrating sphere |
| Light Source | White LED |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE*ab ≤ 0.03 |
| Integrating Sphere Diameter | Ø150 mm |
| Measurement Principle | Dual-beam, post-dispersion spectrophotometry |
| Detector | Silicon photodiode array |
| Display | 5.7-inch color TFT LCD |
| Measurement Time | ~5 s (color only), ~10 s (simultaneous color + haze) |
| Sample Compartment | Open-type sliding drawer (120 mm × 120 mm) |
| Compliance Standards | ASTM D1003, ASTM D5386, ASTM D6166, ISO 13468, ISO 14782, JIS K7136, JIS K7361-1, JIS Z8722, GB/T 2410, GB/T 6324.6 |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | MG-I 400 |
| Illuminant Options | Halogen Lamp (5 V, 9 W) or Optional White LED |
| Incident Angle | 25° |
| Receiving Angle | 25° |
| Reference Geometry | 0°–0° |
| Reflectance Range | 0.0–100.0% |
| Aperture Diameter | Φ40 mm |
| Measurement Time | Approx. 1 s |
| Repeatability | Standard Deviation ≤ 0.1% (10 consecutive readings in air within 10 s) |
| Compliance Standards | JIS D 5705, ISO 5740 |
| Power Supply | 100 V AC, 50/60 Hz |
| Power Consumption | 40 VA (Optical Unit), 26 VA (Measurement Unit) |
| Dimensions (Optical Unit) | 463 mm W × 325 mm D × 500 mm H, 19 kg |
| Dimensions (Measurement Unit) | 350 mm W × 360 mm D × 110 mm H, 5 kg |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | MG-I 7000 |
| Illumination Angle | 25° |
| Receiving Angle | 25° |
| Standard Calibration Geometry | 0°–0° |
| Reflectance Range | 0.0–100.0% |
| Light Source | 5 V, 9 W Halogen Lamp (White LED optional) |
| Measurement Time | Approx. 1 s |
| Aperture Diameter | Φ40 mm |
| Reflectance Repeatability | Standard Deviation ≤ 0.1% (10 consecutive measurements within 10 s) |
| Display | Reflectance (%), ΔReflectance (%) |
| Compliance | ISO 5740 |
| Power Supply | 100 V AC, 50/60 Hz |
| Optical Unit | 40 VA, Measurement Unit: 26 VA |
| Dimensions (Optical Unit) | 463 mm (W) × 325 mm (D) × 500 mm (H), 19 kg |
| Dimensions (Measurement Unit) | 350 mm (W) × 360 mm (D) × 110 mm (H), 5 kg |
| Optional | Data Transfer Software, LED Light Source Module |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | MG-II 400 |
| Light Source | Halogen lamp (5 V, 9 W) or optional white LED |
| Incident Angle | 25° |
| Detection Method | Integrating sphere |
| Measurement Aperture | Φ40 mm |
| Reflectance Range | 0.0–100.0% |
| Repeatability | Standard deviation ≤ 0.1% (10 consecutive measurements at 10 s intervals) |
| Measurement Time | Approx. 1 s |
| Compliance | JIS D 5705, ISO 5740 |
| Power Supply | 100 V AC, 50/60 Hz |
| Power Consumption | 40 VA (optical unit), 26 VA (measurement unit) |
| Dimensions (Optical Unit) | 215 × 430 × 205 mm (W×D×H), 12 kg |
| Dimensions (Measurement Unit) | 350 × 360 × 110 mm (W×D×H), 5 kg |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | MG-II 7000 |
| Illumination Angle | 25° |
| Receiving Method | Integrating Sphere |
| Reflectance Range | 0.0–100.0% |
| Light Source | Halogen Lamp (5 V, 9 W) or Optional White LED |
| Measurement Time | Approx. 1 s |
| Aperture Diameter | Φ40 mm |
| Reflectance Repeatability | Standard Deviation ≤ 0.1% (10 measurements within 10 s) |
| Displayed Parameters | Reflectance (%), ΔReflectance |
| Compliance | ISO 5740 |
| Power Supply | 100 V AC, 50/60 Hz |
| Power Consumption | 40 VA (Optical Unit), 26 VA (Measurement Unit) |
| Dimensions & Weight | Optical Unit — 463 × 325 × 500 mm, 12 kg |
| Optional | Data Transfer Software |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | NDH8000 |
| Type | Automatic |
| Measurement Principle | Dual-beam compensated integrating sphere |
| Light Source | White LED |
| Sample Size Range | 30 mm × 30 mm to 210 mm × 297 mm (A4) |
| Haze Range | 0–100% |
| Total Luminous Transmittance Range | 0–100% |
| Haze Repeatability | ≤0.03% std. dev. (20 consecutive measurements) |
| Transmittance Repeatability | ≤0.03% std. dev. |
| Compliance Standards | JIS K7361, JIS K7136, JIS K7105, ASTM D1003, ISO 13468, ISO 14782 |
| Power Supply | 100–240 V AC, 50/60 Hz, 20 VA |
| Dimensions (Main Unit) | 340 mm (W) × 294 mm (D) × 473 mm (H) |
| Weight (Main Unit) | 14 kg |
| Display | 5.7-inch color LCD |
| Data Storage | 1,000 test records internal memory |
| USB Port | Host & device mode (CSV export via FAT32 USB flash drive) |
| Interface Options | RS-232C, parallel printer port |
| Operating Languages | English, Japanese |
| Calibration Reminder | Configurable due-date alert |
| Real-time Clock | Year/Month/Day/Hour/Minute/Second |
| Averaging | 2–99 cycles programmable |
| Optional Accessories | CU-11 film holder, CU-II test unit, 7-mm abrasion test attachment, thermal line dot printer, impact dot printer, PC control software |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | NE5500 |
| Instrument Type | Benchtop |
| Optical Geometry | 8°/diffuse (d) for reflectance |
| Light Source | White LED (rated lifetime: 20,000 h) |
| Spectral Range | 400–700 nm (10 nm interval) |
| Repeatability | ΔE*ab ≤ 0.03 |
| Measurement Time | ~6.5 s |
| Aperture Options (Reflectance) | LAV Φ22 mm (Φ28 mm), MAV Φ6 mm (Φ10 mm), SAV Φ4 mm (Φ6 mm) |
| Aperture (Transmittance) | Φ12 mm |
| Display | 5.7-inch TFT color LCD |
| Data Storage | Internal memory (100 reference + 2,000 measurement records), SD card (FAT32), CSV export |
| Interfaces | USB, parallel port, SD slot |
| Operating Environment | 15–35 °C, ≤80 % RH (non-condensing) |
| Power | AC 100–240 V, 50/60 Hz, ≤25 VA |
| Dimensions & Weight | 425 × 350 × 188 mm, ~8 kg |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | NF999 |
| Instrument Type | Portable |
| Light Source | Tungsten Halogen Lamp |
| Spectral Range | 400–700 nm |
| Optical Geometry | 0°/45° Dual-Beam Fiber Optic System |
| Measurement Aperture | Ø10 mm (standard), Ø3 mm, Ø2 mm |
| Illuminants | A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 |
| Observer Angles | 2°, 10° |
| Compliance | JIS Z 8722, ISO 7724-1/2/3, DIN 5033, DIN 5036, DIN 6174, ASTM D2244, ASTM E308, ASTM E1164, JIS K 7654, ISO 5/4, ANSI PH2.17, DIN 16536 |
| Wavelength Interval | 10 nm |
| Repeatability (ΔE*ab, white tile, n=20) | ≤0.05 |
| Stability (24 h, 10-min intervals) | ≤0.05 ΔE*ab |
| Measurement Time | ~2 s |
| Data Storage | 400 spectral measurements |
| Reference Data Capacity | 40 sets (spectral reflectance or XYZ) |
| Display | 128 × 64 dot matrix LCD (62 × 44 mm active area) |
| Power | Rechargeable NiCd battery (4.8 V, 800 mAh) |
| Battery Life | ~1,000 measurements per full charge (20–25°C, 10 s interval) |
| Communication | IrDA infrared (compliant with IrDA 1.0), RS-232C (≤19.2 kbps) |
| Operating Temperature | 5–40°C |
| Dimensions | 212 × 77 × 84 mm |
| Weight | 870 g (including battery) |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | NP6000T |
| Form Factor | Benchtop Laboratory Instrument |
| Turbidity Range | 0.0000–2.0000 NTU (FS) |
| Particle Size Channels | 0.5–1, 1–3, 3–7, 7–12, 12–15, ≥15 µm |
| Resolution | 0.0001 NTU (turbidity), 1 particle/mL (counting) |
| Flow Rate | 50 mL/min |
| Operating Temperature | 15–35 °C |
| Accuracy | ±2% FS (0–0.5000 NTU), ±5% FS (0.5001–2.0000 NTU) |
| Repeatability (CV) | ≤5% at 0.1000 NTU and 1.4×10⁴ particles/mL (0.5 µm) |
| Light Source | Semiconductor Laser |
| Output Options | 4–20 mA DC (4 channels), RS-232C, Relay Contacts (optional) |
| Dimensions | 257 × 315 × 233 mm (W×D×H) |
| Weight | 9.2 kg |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | NW-12 |
| Illumination/Viewing Geometry | 45°/0° |
| Measurement Principle | Diffraction Grating Spectrophotometry (Back-illuminated Spectral Analysis) |
| Measurement Area | Φ10 mm |
| Light Source | LED |
| Color Spaces & Indices | CIE XYZ, Yxy, L*a*b*, L*C*h*, Lab, HVC, CIE Whiteness (W), ASTM E313/D1925 Yellowness Index (YI), ΔE*ab, ΔE*94, ΔE00, ΔECMC, TW, BW, WI |
| Measurement Repeatability | ΔE*ab SD ≤ 0.05 (measured 20× on certified white tile) |
| Display | Large-color LCD with real-time SE color value comparison |
| Memory Capacity | 40 standard references + 400 measurement records |
| Power | Rechargeable Li-ion battery (3.7 V, 3200 mAh) |
| AC adapter input | 5 V / 2 A (10 VA) |
| Dimensions & Weight | 220 × 142 × 70 mm |
| Compliance | Meets CIE No. 15, ISO 7724-1, JIS Z 8722, ASTM E308, ASTM E1347, and supports GLP/GMP data integrity requirements via optional software audit trail |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | OME2000 |
| Instrument Type | Benchtop |
| Light Source | Halogen Lamp (12 V / 2 A) |
| Spectral Range | 400–700 nm (20 nm bandwidth) |
| Measurement Modes | ASTM D1500, Saybolt, APHA (Pt-Co), Gardner, CIE XYZ, CIELAB (L*a*b*) |
| Measurement Ranges | ASTM: 0–8.0 |
| Saybolt | −16 to +30 |
| APHA | 1–500 |
| Gardner | No. 1–No. 18 |
| Measurement Accuracy | ASTM D1500 (CV ≤ 3% at ASTM 1.0) |
| Aperture | φ16 mm (transmission beam) |
| Compliance Standards | JIS K 2580, JIS K 0071, ISO 2211, ISO 6271, ISO 4630, ASTM D1209, ASTM D1500, ASTM D1544, ASTM D156, ASTM D6045, USP <631> |
| Power Supply | AC 100 V, 50/60 Hz |
| Power Consumption | 120 W |
| Interface | RS-232C |
| Data Storage | Internal memory with lithium-backed backup |
| Display | Fluorescent VFD (high-contrast, wide-angle, low-light readable) |
| Printer | Thermal printer (two-stage activation, selective output) |
| Averaging | Up to 99 measurements |
| Sample Naming | Alphanumeric entry (stored & printed with results) |
| Timestamping | YY/MM/DD/HH/MM included in printout |
| Optional Accessories | Flow cell adapter, tube measurement kit |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | OME7700 |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | d/8° integrating sphere |
| Light Source | White LED |
| Spectral Range | 400–700 nm (10 nm interval) |
| Repeatability | ΔE*ab ≤ 0.03 |
| Display | 5.7″ color TFT LCD |
| Measurement Time | ≤ 5 s |
| Sample Compartment | Top-opening, pull-out design, accepts cuvettes up to 100 mm pathlength |
| Interface | USB (host & storage, FAT32), Parallel Port |
| Power | AC 100–240 V, 50/60 Hz, ≤35 VA |
| Dimensions (W×D×H) | 540 × 378 × 255 mm |
| Weight | ~17 kg |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | PF7000 |
| Product Type | Benchtop Color Difference Meter |
| Optical Geometry | d/8° integrating sphere |
| Light Source | Pulsed Xenon Lamp |
| Spectral Range | 400–700 nm |
| Wavelength Interval | 10 nm |
| Repeatability | ΔE*ab ≤ 0.03 |
| Measurement Aperture | Ø28 mm (illumination Ø34 mm) |
| Standard Illuminants | A, C, D65, F6, F8, F10 |
| Observer Angles | 2° and 10° |
| Photometric System | Dual-beam compensation |
| Output Interface | RS-232C |
| Power Supply | AC 100–240 V, 50/60 Hz, 120 VA |
| Dimensions | 230 × 425 × 530 mm (W×D×H) |
| Weight | 23.0 kg |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | PG-2M |
| Measurement Angles | 20°, 60°, 85° |
| Measurement Range | 0.0–2000 GU |
| Accuracy | ±1 GU (0.0–199.9 GU), ±10 GU (200–2000 GU) |
| Repeatability | ±1 GU |
| Spot Size | 20°: 10.0 × 10.6 mm |
| 60° | 10.0 × 20.0 mm |
| 85° | 10.0 × 40.1 mm |
| Power Supply | 9 V alkaline battery (1×) |
| Dimensions | 150 × 49 × 80 mm |
| Weight | 0.42 kg (without battery) |
| Light Source | 5 V / 125 mA halogen lamp |
| Interface | RS-232C |
| Compliance | JIS Z 8722, JIS K 5400, ISO 2813, ISO 7688, ASTM D 523, ASTM D 2457, DIN 67530, TAPPI T 480 |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | PG-II/II M |
| Measurement Angles | PG-II — single angle (20°, 45°, 60°, 75° or 85°) |
| Gloss Range | 0.1–2038 GU (20°), 0.1–1675 GU (45°), 0.1–1000 GU (60°), 0.1–378 GU (75°), 0.1–162 GU (85°) |
| Light Source | Tungsten lamp (5 V / 125 mA, ~5,000 h lifetime) |
| Aperture | 10.5 mm × 60 mm |
| Measurement Time | ~1 s |
| Repeatability | ±0.5 GU (standard deviation, 20 measurements at 10 s intervals) |
| Power | 9 V alkaline battery (1 pc) |
| Power Consumption | 300 mW (single-angle), 600 mW (triple-angle) |
| Dimensions | 150 mm × 49 mm × 80 mm |
| Weight | 420 g (net, battery excluded) |
| Compliance | JIS Z 7841, ASTM D523, ISO 2813 |
| Interface | RS-232C for remote control and data export |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | SD-5000 |
| Instrument Type | Benchtop |
| Optical Geometry | 8°/diffuse (d) |
| Light Source | Tungsten Halogen Lamp |
| Spectral Range | 380 nm – 780 nm |
| Product Category | Spectrophotometric Colorimeter |
| Compliance | ISO 7724, CIE No. 15, ASTM E308, JIS Z 8722 |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | SD5000 |
| Instrument Type | Benchtop |
| Light Source | 12 V / 50 W Halogen Lamp |
| Spectral Range | 380 nm – 780 nm |
| Spectral Interval | 5 nm |
| Illumination/Viewing Geometry | d/8° (Diffuse/8°) and D/0° (Diffuse/0°) configurable |
| SCI/SCE Modes | Motorized, automatic switching |
| Measurement Apertures | Reflectance – 6 mm, 10 mm, 28 mm Ø |
| Integrating Sphere Diameter | 150 mm |
| Detector | 256-element CCD image sensor |
| Optical System | Post-dispersion via diffraction grating |
| Measurement Method | Dual-beam (sample/reference) |
| Compliance | JIS Z 8722, ISO 7724-1/2/3, ASTM E308, ASTM E313, ASTM D2244, DIN 5033 |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | SD7000 |
| Illumination/Viewing Geometry | d/8° (SCI & SCE) and D/0° (transmittance) |
| Spectral Range | 380–780 nm |
| Interval | 5 nm |
| Measurement Time | ~3 s (SCI/SCE) |
| Aperture Options | LAV (Ø19 mm / Ø25.4 mm), MAV (Ø8 mm / Ø12.7 mm), SAV (Ø3 mm / Ø6.4 mm) |
| Detector | CMOS linear image sensor |
| Light Source | Pulsed xenon lamp |
| Reflectance Accuracy | σ < 0.1% (standard white tile, 30 measurements in 10 s) |
| Color Difference Repeatability | ΔE*ab σ < 0.01 |
| Compliance | JIS Z8715, Z8722, Z8729, Z8730 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions | 316 × 462 × 251 mm (W×D×H) |
| Weight | 14 kg (main unit only) |
| Optional | CUII controller |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | SE6000 |
| Instrument Type | Benchtop |
| Optical Geometry | 0°/45° Integrating Sphere |
| Light Source | 12 V, 50 W Halogen Lamp |
| Spectral Range | 380–780 nm (10 nm Interval) |
| Measurement Apertures | 3 mm, 6 mm, 10 mm, 30 mm (reflectance) |
| Repeatability | ΔE* ≤ 0.02 (after 30 min warm-up, 30 consecutive readings at 10 s intervals) |
| Compliance | JIS Z 8722, ASTM E 308, ASTM E 313 |
| Display | 256 × 64 dot matrix LCD (166.25 mm × 41.45 mm active area) |
| Interface | RS-232C |
| Operating Environment | 15–40 °C, 30–80 % RH (non-condensing) |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | SE7700 |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | 0/45° Integrating Sphere |
| Light Source | Tungsten Halogen Lamp |
| Spectral Range | 380–780 nm |
| Spectral Interval | 5 nm |
| Repeatability | ΔE*ab ≤ 0.03 |
| Measured Aperture Diameters | 6 mm, 10 mm, 25 mm, 35 mm, 50 mm |
| Display | Color Touchscreen LCD |
| Data Storage | USB Memory Card Support |
| Optional Accessories | Removable Optical Fiber Probe, Petroleum Sample Measurement Kit |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | SQ-2000 |
| Illumination/Viewing Geometry | 8°/d (Diffuse) |
| Spectral Range | 380–780 nm |
| Wavelength Interval | 10 nm |
| Optical System | Dual-beam compensation |
| Light Source | 12 V, 50 W Halogen Lamp (NA 55928) |
| Detector | High-speed Silicon Photodiode |
| Aperture Options | φ3 mm, φ10 mm, φ30 mm |
| Standard Illuminants | C/2°, D65/2°, A/2°, F6/2°, F8/2°, F10/2°, C/10°, D65/10°, A/10°, F6/10°, F8/10°, F10/10° |
| Color Spaces | CIE XYZ, CIELAB (L*a*b*), CIELCH, YI, WI, APHA, HVC, M(D:A), OD |
| ΔE*ab Repeatability | ≤ 0.06 |
| Spectral Reflectance Repeatability | ≤ 0.5% |
| A/D Resolution | 16-bit (with 18-bit internal auto-calibration) |
| Display | 256 × 64-dot Fluorescent Tube (Blue-Green) |
| Interface | RS-232C (Standard) |
| Power Supply | 100 V AC, 50/60 Hz |
| Power Consumption | 150 W |
| Dimensions & Weight | 15.0 kg |
| Operating Environment | 0–40 °C, 30–80% RH (non-condensing) |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | SQ7700 |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | d/8° integrating sphere |
| Light Source | White LED |
| Spectral Range | 380–780 nm |
| Measurement Interval | 5 nm |
| Reflectance/Transmittance Mode | Dual SCI & SCE |
| Display | Large color LCD with capacitive touch panel |
| Data Storage | SD card (user-removable) |
| Compliance | JIS Z8722, JIS Z7801-4, JIS Z8781-6, JIS Z8715, ASTM E308, ASTM E313, ASTM D1925 |
| Optional Capabilities | APHA & Gardner color measurement (with accessory kit) |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | TZ-6000 |
| Light Source | 12 V / 4 A Halogen Lamp (20 W) |
| Illumination/Viewing Geometry | n-D (Normal-Diffuse, optimized for transmittance) |
| Aperture | 14 mm × 45 mm |
| Measurement Area | 7 mm Ø (illuminated), 20 mm Ø (incident port) |
| Compliance | JIS Z 8722, JIS Z 8729, JIS Z 8730, JIS Z 8715, ASTM E 308, ASTM E 313, ASTM D 1925, ISO 7724, CIE Publication No. 15.2 |
| Accuracy | ΔE* ≤ ±0.02 (std. dev., measured 20× on white reference after 20-min warm-up) |
| Interface | RS-232C |
| Dimensions | 425 mm (W) × 415 mm (D) × 189 mm (H) |
| Weight | 13 kg |
| Power | 100–240 V AC, 50/60 Hz, 140 W |
| Operating Environment | 10–40 °C, 30–80 % RH (non-condensing) |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | VG Series |
| Light Source | White LED |
| Measurement Angles | 20°, 45°, 60°, 75°, 85° |
| Compliance | ISO 8254-1, ISO 8254-3, ISO 2813, ISO 7668, JIS Z 8741, JIS P 8142, ASTM D523, ASTM D1223, TAPPI T480, TAPPI T653, DIN 67530 |
| Measurement Aperture | 14 mm × 45 mm |
| Measurement Range (GU) | 20°: 0.1–2038 |
| 45° | 0.1–1675 |
| 60° | 0.1–1000 |
| 75° | 0.1–378 |
| 85° | 0.1–162 |
| Repeatability | ±0.1% after 30-min warm-up (23 °C, standard white tile, 20 measurements at 10-s intervals) |
| Measurement Time | ~1 s (single angle), ~2 s (dual angle), ~4 s (full 5-angle scan) |
| Operating Environment | 10–40 °C, 30–80% RH (non-condensing) |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Power Consumption | 20 W |
| Optical Unit Dimensions | 483 × 157 × 240 mm (W×D×H) |
| Control Unit Dimensions | 220 × 255 × 100 mm (W×D×H) |
| Weight | ~13 kg |
| Detector | High-sensitivity silicon photodiode |
| Interface | RS-232C |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | VG7000 |
| Product Type | Automatic |
| Haze Range | 0–100% |
| Transmittance Range | 0–100% |
| Haze Repeatability | ±0.01% |
| Transmittance Repeatability | ±0.05% |
| Measurement Angles | 20°, 45°, 60°, 75°, 85° |
| Aperture | 14 mm × 45 mm |
| Measurement Time (5-angle) | ~4 s |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Power Consumption | 20 W |
| Operating Environment | 10–40 °C, 30–80% RH (non-condensing) |
| Dimensions | 483 mm (W) × 157 mm (D) × 240 mm (H) |
| Weight | ~13 kg |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | VG8000 |
| Measurement Angles | 20°, 45°, 60°, 75°, 85° |
| Gloss Range | 0.1–2038 GU (20°) to 0.1–162 GU (85°) |
| Aperture | 14 mm × 45 mm |
| Measurement Time | ≤1 s (single angle), ≤4 s (five angles) |
| Accuracy | ±0.1% after 30-min warm-up (vs. standard white tile) |
| Repeatability | ≤0.1% (20 measurements, 10-s interval, 23°C) |
| Operating Environment | 10–40°C, 30–80% RH (non-condensing) |
| Power Supply | 100–240 V AC, 50/60 Hz, 20 W |
| Dimensions | 483 × 157 × 240 mm (W×D×H) |
| Weight | ~13 kg |
| Compliance | ISO 8254-1, ISO 8254-3, JIS Z 8741, JIS P 8142, TAPPI T 480 |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | VSR400 |
| Instrument Type | Benchtop |
| Optical Geometry | 45°/0° |
| Light Source | 12 V, 50 W Halogen Lamp |
| Measurement Spot Sizes | Ø0.05 mm, Ø0.1 mm, Ø0.2 mm, Ø0.5 mm |
| Sample Stage | 200 mm × 150 mm (X: 120 mm, Y: 90 mm, Z: 50 mm) |
| Detector | Tristimulus RGB-optimized CCD with X, Y, Z, and B-440 filters |
| Display | 13″ color LCD monitor |
| Data Interface | RS-232C |
| Compliance | Designed for ISO 13655 (M0/M1/M2/M3), ASTM E308, CIE No. 15, JIS Z 8722 |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | VSS-300H |
| Type | Benchtop Colorimeter |
| Measurement Principle | 45°/0° Illumination/Viewing Geometry |
| Spectral Range | 400–700 nm |
| Wavelength Intervals | 20 nm (standard), optional 10 nm or 5 nm |
| Measuring Apertures | φ0.1 mm, φ0.2 mm, φ0.5 mm, φ1.0 mm |
| Compliance | JIS Z 8722, ASTM E 308 |
| Light Source | 12 V / 4 A Halogen Lamp |
| Detector | Color CCD Camera |
| Display | 14" Color Monitor |
| Power Consumption | 90 W |
| Optical Unit Dimensions | 360 × 360 × 460 mm (W×D×H) |
| Measurement Unit Dimensions | 350 × 360 × 110 mm (W×D×H) |
| XY Stage | 200 × 150 mm Motorized Precision Platform |
| Software Interface | Windows-Compatible Color Management Software with RS-232C Communication |
| Brand | NIPPON DENSHOKU |
|---|---|
| Origin | Japan |
| Model | VSS7700 |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | 0°/45° Integrating Sphere |
| Light Source | Tungsten Halogen Lamp |
| Spectral Range | 380–780 nm |
| Repeatability | ΔE*ab ≤ 0.001 |
| Measurement Apertures | Ø0.03 mm, Ø0.05 mm, Ø0.2 mm, Ø0.5 mm |
| Display | 5.7″ Color TFT LCD |
| Detector | CMOS Image Sensor with Spectral Dispersion Optics |
| Objective Lens | 10× Microscope Objective |
| Power Supply | AC 100–220 V, 20/60 Hz, 40 VA |
| Dimensions (W×D×H) | 371 × 422 × 471 mm |
| Weight | 17.9 kg |