- All
- Favorite
- Popular
- Most rated
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | MLR-8W |
| Temperature Measurement Range | 0–65 °C |
| Temperature Resolution | 0.0001 °C |
| Sample Mass | 0.5–1.5 g |
| Heat Capacity | ~10,500 J/K |
| Outer Water Jacket Volume | ~51 L |
| Inner Water Bucket Volume | ~2.1 L |
| Ignition Voltage | 20 V |
| Ignition Duration | Programmable (3–8 s) |
| Water Quantification Accuracy | ≤ ±1 g |
| Ambient Operating Conditions | 5–40 °C, ≤30% RH (max ΔT ≤1 °C per test) |
| Power Supply | AC 220 V |
| Dimensions | 450 × 580 × 480 mm |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | HDL-600S |
| Measurement Principle | Coulometric Titration |
| Sample Capacity | 1–24 samples (batch + on-the-fly addition) |
| Sulfur Detection Range | 0.1–40% |
| Resolution | 0.001% |
| Temperature Control | 1150 °C (coal), 920 °C (oil) |
| Temperature Stability | ±3 °C |
| Sample Mass | 40–70 mg (coal), 50–100 mg (oil) |
| Test Duration | 4–8 min per sample |
| Power Supply | 220 V ±10%, 50 Hz |
| Max Power Consumption | ≤5 kW |
| Dimensions | 550 × 500 × 630 mm |
| Weight | 40 kg |
| Compliance | GB/T 214–2007, GB/T 214–1996 |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PCZ |
| Instrument Type | Hammer Crusher |
| Sample Applicability | Hard, Brittle Materials (e.g., coal, coke, limestone, pyrite, shale) |
| Feed Size | ≤70 mm |
| Discharge Size | 1–6 mm (adjustable via interchangeable perforated screen plates) |
| Throughput Capacity | 0.2–0.5 T/h (PCS variant with 1/8 splitter) |
| Compliance | GB 474–2008 “Method for Preparation of Coal Sample” |
| Screen Options | Multiple aperture sizes (1 mm, 3 mm, 6 mm) fabricated from wear-resistant alloy steel |
| Rotor Speed | Fixed-speed induction motor drive (380 V, 3-phase, 50 Hz) |
| standard motor power | 1.5 kW (PCZ180×150/PCZ180×350), 4 kW (PCZ250×360) |
| Structural Design | Fully enclosed cast-iron housing with dust-tight sealing |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | EPS 1/8 |
| Instrument Type | Laboratory Crusher & Mechanical Divider |
| Sample Applicability | Hard, Brittle Bulk Materials (e.g., Coal, Rock, Ore, Clinker) |
| Feed Size | ≤120 mm |
| Adjustable Output Particle Size | 3–25 mm |
| Final Discharge Size | ≥0.5 mm |
| Throughput Capacity | 300–500 kg/h |
| Division Ratio Options | 1:2, 1:4, 1:8 (primary) |
| 1 | 9 (secondary via dual-stage division) |
| Moisture Tolerance (as-received basis) | ≤11% |
| Power Supply | 3-phase AC 380 V, 50 Hz |
| Motor Power | 3 kW |
| Net Weight | ~400 kg |
| Dimensions (L×W×H) | 1100 × 590 × 1160 mm |
| Compliance | Designed per GB/T 474–2008 “Method for Preparation of Coal Samples” |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | HDL-600H |
| Measurement Principle | Coulometric Titration |
| Sulfur Range | 0.01–40% |
| Resolution | 0.001% |
| Analysis Time | 4–8 min (sample-dependent) |
| Combustion Temperature | 1150 °C (coal), 920 °C (heavy oil) |
| Temperature Control Accuracy | ±3 °C |
| Sample Mass | 50 mg ±5 mg (coal), 80–100 mg (heavy oil) |
| Sample Capacity | 1–24 positions per run |
| Compliance | GB/T 214–1996 |
| Power Supply | 220 V ±10%, 50 Hz |
| Max. Power Consumption | ≤3.5 kW |
| Dimensions (W×D×H) | 1100 × 540 × 450 mm |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SDCY-6000D |
| Automation Level | Semi-Automatic |
| Sampling Depth | 1200 mm |
| Sampling Capacity | 0–5 kg per cycle |
| Max Particle Size | 60 mm |
| Motor Power | 1.2 kW |
| Operating Voltage | 220 V AC |
| Sampler Weight | 20 kg |
| Auger Tube Diameter | Φ133 mm |
| Overall Dimensions | 1660 × 500 × 300 mm |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | FCL-1 |
| Temperature Control Accuracy | ±5°C at 1100°C |
| Temperature Range | Ambient to 1300°C |
| Heating Time | ≤25 min to 1100°C |
| Method | High-Temperature Combustion Hydrolysis |
| Fluorine Analysis Compliance | GB/T 4633–2014 |
| Chlorine Analysis Compliance | GB/T 3558–2014 |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Max. Power Consumption | ≤3.5 kW |
| Stirring Speed | Continuously Adjustable with Digital Display |
| Flowmeter Range | 0–1000 mL/min (graduation: 10 mL/min) |
| High-Temperature Furnace | Capable of ≥1100°C with ≥80 mm uniform zone at 1100±5°C |
| Combustion Tube | Fused Quartz, Rated ≥1200°C |
| Voltage Control for Evaporation | Solid-State Relay, 0–220 V Continuous Adjustment |
| Temperature Controller | PID-Based with Low-Drift Components |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | GJ-1 |
| Instrument Type | Pulverizer |
| Sample Type | Hard Materials (Metals, Coal, Coke, Ores, Granular Solids) |
| Feed Size | ≤13 mm |
| Output Particle Size | 80–200 mesh (0.2 mm nominal) |
| Discharge Fineness Range | 0.01–0.5 mm |
| Loading Capacity | 100 g |
| Motor Power | 1.5 kW |
| Supply Voltage | 380 V AC |
| Weight | 120 kg |
| Dimensions (W×D×H) | 480×480×690 mm |
| Grinding Bowl Material | Manganese Steel |
| Bowl Quantity | 1 |
| Processing Time | 1–5 min |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZY/TF3 |
| Blade Material | 201 Stainless Steel (default), optional 304 SS |
| Blade Dimensions (L×W×T) | 120 mm × 90 mm × 50 mm |
| Handle Length | 150 mm |
| Handle Material | 201 Stainless Steel |
| Blade Tip | Flat (square-edged) |
| Compliance | ASTM D75, ISO 13909, GB/T 2007.1–2018 |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Sink-Float Testing Bucket Set (Sieve-Bottom + Heavy-Liquid Bucket) |
| Price Range | USD 11–70 |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CY/TF |
| Price Range | USD 32–63 |
| Material | Standard 201 Stainless Steel (304 SS Optional) |
| Handle Length | 710 mm (CY/TF1), 810 mm (CY/TF2), 830 mm (CY/TF3) |
| Scoop Width | 100 mm (CY/TF1), 190 mm (CY/TF2), 300 mm (CY/TF3) |
| Scoop Depth | 80 mm (CY/TF1), 100 mm (CY/TF2), 120 mm (CY/TF3) |
| Max Particle Size Handled | 25 mm (CY/TF1), 50 mm (CY/TF2), 100 mm (CY/TF3) |
| Key | Brand: MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | JCM-2 |
| Power | 120 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Motor Speed | 1400 rpm |
| Dimensions (L×W×H) | 360 mm × 240 mm × 300 mm |
| Weight | 19 kg |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XPZ200×75 |
| Instrument Type | Dual-Roll Crusher |
| Sample Applicability | Hard and Medium-Hard Materials (Compressive Strength ≤ 700 kg/cm² or ≤ 150 MPa) |
| Feed Size | ≤ 13 mm |
| Discharge Size | Adjustable down to ≤ 1 mm (typical range: 0.5–3 mm) |
| Throughput Capacity | Up to 300 kg/h (at optimal gap setting) |
| Roll Dimensions | Φ200 × 75 mm |
| Roll Speed | 450 rpm |
| Motor Power | 1.5 kW |
| Supply Voltage | 3-phase AC 380 V ±10%, 50 Hz |
| Net Weight | ~200 kg |
| Overall Dimensions (L×W×H) | 640 × 450 × 875 mm |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | SFQ Series |
| Material Options | Galvanized Steel or Stainless Steel |
| Compliance | Designed per GB/T 474–2008 (revised edition of GB 474–1996) |
| Slot Count | 16–32 slots (per side, ≥8 per side) |
| Slot Width | 5–32.5 mm (2.5–3× nominal top particle size, min. 5 mm) |
| Minimum Chute Inclination | ≥60° |
| Particle Size Handling Range | <0.5 mm to <13 mm |
| Sample Retention Mass | 1–7.5 kg depending on top size |
| Construction | Non-pressurized, gravity-fed, manual operation |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DB |
| Price Range | USD 45 – 92 |
| Material | AISI 304 Stainless Steel |
| Compliance | Designed per GB/T 474 & GB/T 475 |
| Available Sizes | DB300 (Φ300 mm), DB400 (Φ400 mm), DB500 (Φ500 mm), DB600 (Φ600 mm), DB700 (Φ700 mm), DB800 (Φ800 mm), DB900 (Φ900 mm), DB1200 (Φ1200 mm) |
| Dimensions (DB800) | Diameter 800 mm, Plate Height 220 mm, Handle Length 900 mm |
| Surface Finish | Electropolished, Non-porous, Corrosion-Resistant |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | NJJB-2 |
| Price | USD 320 (FOB) |
| Power Supply | 220 V, 50 Hz |
| Power Consumption | 30 W |
| Bend Plate Rotation Angle | 45° |
| Stirring Rod Speed | 150 rpm |
| Crucible Rotation Speed | 15 rpm |
| Stirring Duration at 45° | 105 s |
| Bend Plate Return Time (45° → Vertical) | 15 s |
| Display | 3-digit LED |
| Dimensions (L×W×H) | 235 × 322 × 305 mm |
| Weight | 5 kg |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | MSSC-5000 |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Drying Methods | Microwave, Infrared, or Combined |
| Microwave Power | Adjustable via software |
| Sample Mass (Total Moisture) | 10–12 g, weighed to 0.001 g |
| Sample Mass (Analytical Moisture) | 1.45–1.55 g, weighed to 0.0001 g |
| Balance Resolution | 0.0001 g |
| Balance Capacity | 0–195 g |
| Total Moisture Drying Time | 12–15 min (adjustable) |
| Analytical Moisture Drying Time | ~10 min (adjustable) |
| Max. Sample Capacity per Batch | 9 specimens |
| Particle Size (Total Moisture) | <6 mm |
| Particle Size (Analytical Moisture) | ≤80 mesh |
| Operating Temperature | 0–40 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (L×W×H) | 480 × 350 × 540 mm |
| Net Weight | 35 kg |
| Key | Brand: MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | ZY/TF12 |
| Material | Carbon Steel |
| Configuration | Vertical Manual Crusher with Adjustable Handle & Counterweight |
| Dimensions (ZY/TF12) | Ø240 mm × 80 mm crushing chamber, overall height ≈ 800 mm, handle length ≈ 220 mm |
| Weight | ≈ 30 kg |
| Customization Available | Flat compaction plates, vertical/horizontal configurations, diameters up to Ø600 mm, heights up to 800 mm |
| Optional Sizes | ZY/TF11 (Ø280×125 mm, 80 kg), ZY/TF13 (Ø180×60 mm, 13 kg), Large Coal Roller (Ø200×250 mm), Small Coal Roller (Ø175×200 mm) |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | LM |
| Price | USD 92 (FOB) |
| Input Voltage Range | ±15% of 220 VAC |
| Control Signals | 4–20 mA, 0–5 VDC |
| Output Trigger Type | Single-Phase Phase-Angle Control |
| Isolation | Optocoupled Input/Output |
| Operating Temperature | –20 °C to +40 °C |
| Relative Humidity | ≤85% RH at 25 °C |
| Conducted Current | 50 mA |
| On-State Voltage Drop | <1.5 V |
| Off-State Leakage Current | <10 mA |
| Turn-On Time (50 Hz) | 1 ms |
| Turn-Off Time | 10 ms |
| Dimensions (L×W×H) | 210 × 135 × 270 mm |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XL-1 |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1000 °C |
| Temperature Control Accuracy | ±5 °C |
| Rated Power | 4 kW |
| Heating Time to Max Temp | 90 min |
| Heating Element | Nickel-Chromium Resistance Wire |
| Internal Chamber Dimensions | 325 × 200 × 125 mm (L × W × H) |
| Control Method | Analog On/Off or PID Controller (External) |
| Insulation Material | Lightweight Refractory Insulating Brick |
| Chimney Port | Adjustable Rear-Mounted Flue |
| Viewing Port | Centered on Door |
| Door Mechanism | Counterweighted Hinged Lid |
| Thermal Sensor Interface | Standard Thermocouple Insertion Port (Type K recommended) |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Spiral-Type |
| Price | USD 135 (FOB) |
| Maximum Sample Mass | ~1 g per press |
| Standard Pellet Diameter | 12 mm |
| Customizable Pellet Diameters | 3 mm, 5 mm, 6 mm, 10 mm, 11 mm (upon request) |
| Target Applications | Calorimetric Standard Preparation (e.g., Benzoic Acid), Solid Fuel Pelletization |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Instrument Type | Oxygen Bomb Calorimeter |
| Measurement Mode | Adiabatic Calorimetry |
| Temperature Range | 0–65 °C |
| Temperature Resolution | 0.0001 K |
| Precision | ±0.1% RSD |
| Single-Sample Test Duration | ~15 min |
| Heat Capacity | ~10,500 J/K |
| Outer Water Jacket Volume | 51 L |
| Inner Water Bucket Volume | 2.3 L |
| Ignition Voltage | AC 24 V (5 s duration) |
| Oxygen Bomb Material | Ni-Cr-Mo Alloy |
| Bomb Pressure Rating | 20 MPa |
| Charging Pressure | 2.8–3.0 MPa |
| Power Supply | 220 V ±10%, 30 W |
| Dimensions (L×W×H) | 660 × 500 × 540 mm |
| Weight | ~30 kg |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CZ10 |
| Vibration Force | 100 kgf |
| Power Consumption | 0.008 kW |
| Vibration Frequency | 3000 rpm |
| Operating Voltage | 220 V AC |
| Applicable Bin Wall Thickness | 0.6–0.8 mm |
| Weight | 2 kg |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | NJ5000-3 |
| Stirring Angle | 45° |
| Stirring Speed | 15 rpm (crucible), 150 rpm (stirrer rod) |
| Stirring Duration | 100 s at 45°, 20 s for vertical transition |
| Drum Speed | 50 ± 2 rpm |
| Drum Rotations | 250 preset |
| Static Pressing Duration | ~30 s |
| Power Supply | 220 V, 50 Hz |
| Power Consumption | ~40 W |
| Dimensions | 400 × 380 × 310 mm |
| Display | Digital LED |
Show next