Optical Instruments
Filter
Showing 5371–5400 of 7826 results
| Brand | AtumLaser |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Erbius-SF-1550-X |
| Output Power Options | 1 W, 5 W, 10 W |
| Center Wavelength | 1550 nm (tunable within 1535–1580 nm) |
| Linewidth (FWHM) | < 1 kHz |
| Beam Quality (M²) | ≤ 1.05 |
| Power Stability | < ±1% RMS over 8 hours |
| Relative Intensity Noise (RIN) | < −120 dB/Hz @ 1 MHz peak |
| Polarization | Linear (optional) or Random |
| Piezo Tuning Bandwidth | Up to 10 kHz |
| Thermal Tuning Range | 500 pm |
| Operating Temperature | 15–35 °C |
| Cooling | Conductive + optional air cooling |
| Compliance | RoHS, CE, FDA 21 CFR Part 11 (software-controlled variants), ISO 9001-manufactured subsystems |
| Brand | Optronic Laboratories |
|---|---|
| Origin | USA |
| Model | OL-3m |
| Sphere Diameter | 3 meters (customizable from 0.5 m to 3 m) |
| Coating Options | PTFE (for small spheres), Optolon 2 (standard for mid-to-large spheres), Avian-D (domestic housing + imported coating variant) |
| Mounting | Motorized lid actuation available for spheres ≥2 m |
| Compliance | Designed to meet ASTM E1337, CIE S 025/E:2015, and ISO/CIE 19476:2014 requirements for photometric calibration and luminous flux measurement |
| Brand | Optronic Laboratories |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | OL750 / OL756 |
| Price Range | USD 110,000 – 138,000 |
| Brand | Optronic Laboratories |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | OL750D |
| Price Range | USD 110,000 – 135,000 |
| Grating Spectral Range | 200 nm – 30 µm |
| Wavelength Accuracy | ±0.05% |
| Wavelength Repeatability | ±0.01% |
| Reciprocal Linear Dispersion | 2 nm/mm |
| Bandwidth (FWHM) | 0.25–10 nm |
| Stray Light Level | ≤1×10⁻⁸ |
| Grating Size | 68 mm × 68 mm |
| Focal Length | 254 mm (f/4) |
| Chopper Frequency Range | 10–500 Hz |
| Control Interface | RS-422 |
| Nonlinearity Error | <0.1% |
| Silicon Detector (Spectral Range | 200–1100 nm |
| Lead Sulfide (PbS) Detector (Spectral Range | 1000–3200 nm |
| Brand | Optronic Laboratories |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Optolon 2A / Avian-D / Avian-B |
| Price Range | USD $0–7,000 (varies by coating type, surface area, and application support) |
| Brand | Orbeco-Hellige |
|---|---|
| Origin | USA |
| Model | 705-VA2 |
| Compliance | ASTM D1544, AOCS Td 1a |
| Sample Path Length | 10 mm |
| Light Source | Calibrated Tungsten-Halogen Lamp with Daylight-Mimicking Filter |
| Illumination Standard | Simulated North Sky Daylight (CIE Standard Illuminant C, ~6774 K) |
| Configuration | Portable Visual Comparator System with Dual Standard Color Disks (620C-45 & 620C-46), Two Cuvettes, Illuminator, Carrying Case, and Instruction Manual |
| Brand | Orbeco-Hellige |
|---|---|
| Origin | USA |
| Model | 705-VA2 |
| Compliance | ASTM D-1544, AOCS Td 1a |
| Color Scale Range | Gardner No. 1–18 (via dual calibrated discs No.602C-43 and No.602C-44) |
| Sample Vessels | Two cylindrical quartz tubes (Part No. 605-VT) |
| Illumination | Daylight-simulating light source (Part No. 600-DA) |
| Optical System | Precision-aligned prismatic magnifier for side-by-side visual comparison |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INST Laser Instrument |
| Price | Upon Request |
| Core Components | Semiconductor-based Fiber Laser Module |
| Brand | Orbits Lightwave |
|---|---|
| Origin | USA |
| Model | ETH |
| Output Power | >350 mW (oscillator), up to 50 W (with amplifier) |
| Linewidth | <1 Hz (Lorentzian), <200 Hz (over 1 ms) |
| Frequency Stability | <0.25 MHz/°C |
| OSNR | >80 dB |
| SMSR | >75 dB |
| RIN | <-175 dBc/Hz (shot-noise-limited) |
| Brand | Orbits Lightwave |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | ETH-30-1550.12-5-TT20-PZ10B |
| Core Technology | All-Fiber Virtual-Ring SlowLight™ Oscillator |
| Output Power (Oscillator) | >350 mW |
| Amplified Output Power | Up to 50 W |
| Lorentzian Linewidth | <1 Hz |
| 1-ms Linewidth | <200 Hz |
| Frequency Stability | <0.25 MHz/°C |
| Optical Signal-to-Noise Ratio | >80 dB |
| Side-Mode Suppression Ratio | >75 dB |
| Relative Intensity Noise | <−175 dBc/Hz |
| Wavelength | 1550.12 nm |
| Tuning Range (PZT) | ±5 GHz |
| Polarization Extinction Ratio | >25 dB |
| Operating Temperature Range | 15–35 °C |
| Power Supply | ±15 V DC, <2 A |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INST High Power |
| Core Components | Semiconductor-based seed laser + integrated/fiber-coupled optical amplification modules |
| Output Power Range | 0.3–50 W (oscillator-only to externally amplified configurations) |
| Wavelength Options | 1530–1565 nm & 1047–1080 nm |
| Linewidth | <1 Hz (Lorentzian), <1 kHz (1 ms measurement) |
| Frequency Stability | <1 MHz/°C |
| RIN | –165 to –175 dBc/Hz @ 100 MHz |
| OSNR | >90 dBc (0.05 nm RBW) |
| SMSR | >75 dBc (3 MHz RBW) |
| Polarization Extinction Ratio | >23 dB |
| Beam Quality | M² < 1.05 |
| Power Stability | ±0.1% RMS |
| Absolute Wavelength Accuracy | ±0.02–±0.05 nm |
| Operating Temperature | 10–55 °C |
| Power Consumption | 30–50 W |
| Form Factor | 2U 19″ rack-mountable chassis |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HVA-1 |
| Core Component | Semiconductor Laser System Integration Platform |
| Input Voltage Range | 0–5 V |
| Output Voltage Range | –30 to +180 V |
| Small-Signal Bandwidth | 1 kHz |
| Noise Spectral Density | ≤2 nV/√Hz (30 Hz – 10 kHz), ≤100 nV/√Hz (>10 kHz) |
| 1/f Voltage Noise | ≤20 nV/√Hz @ 20 Hz |
| AC Input | 90–264 VAC, 47–63 Hz |
| Power Connector | IEC 320-C14 |
| Dimensions | 3.25 × 6.25 × 7 in (82.6 × 158.8 × 177.8 mm) |
| Weight | 3 lbs (1.36 kg) |
| Operating Temperature | 0–40 °C |
| Operating Humidity | 20–90 % RH (non-condensing) |
| Brand | Orbits Lightwave |
|---|---|
| Origin | USA |
| Model | OL-ETH |
| Core Technology | Semiconductor-based All-Fiber Virtual Ring Cavity Laser |
| Output Power | Up to 350 mW (oscillator-only), scalable to 500 mW |
| Linewidth | <1 Hz (Lorentzian, white-noise-limited) |
| OSNR | >90 dBc (50 pm RBW, at 180 mW) |
| SMSR | >75 dBc (3 MHz RBW) |
| RIN | −175 dBc/Hz @ 100 MHz (at 100 mW) |
| Frequency Stability | <0.25 MHz/°C |
| Polarization Extinction Ratio | >23 dB |
| Wavelength Options | 1530–1565 nm & 1047–1080 nm |
| Tuning | PZT (1–60 GHz), Thermal (0–160 GHz) |
| Absolute Wavelength Accuracy | ±0.02 nm |
| Beam Quality | M² < 1.05 |
| Power Stability | ±0.1% RMS |
| Operating Temperature | 10–55 °C |
| Power Consumption | 5–30 W |
| Brand | Orient KOJI |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | AO8310 |
| Component Category | Optical Element |
| Dimensions | 50 × 50 mm |
| Included Filters | 7 pieces with center wavelengths at 290–380 nm (broadband), 300 nm, 320 nm, 360 nm, 400 nm, 450 nm, and 510 nm |
| Brand | Orient KOJI |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | EzTime-PL |
| Price Range | USD 1,400 – 7,200 (est.) |
| Component Type | Optical Instrument Module |
| Excitation Wavelength Range | 375–2200 nm |
| Pulse Width Tuning | 25 ns – 500 ms (continuous) |
| Repetition Rate | 0.01 Hz – 1 kHz |
| Lifetime Detection Range | 1 µs – 10 s |
| Output Stability (CW) | < 2% RMS |
| Electrical Rise/Fall Time | < 1 ns (50 Ω load) |
| Max. Optical Power | 5 W (configurable) |
| Synchronization Interface | TTL-compatible trigger output & input |
| Compatible Systems | HORIBA FluoroLog/FLS, Edinburgh Instruments FLS series, Becker & Hickl TCSPC MCS/Phosphorescence modes |
| Brand | Orient KOJI |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OKI-uFRLs |
| Price Range | USD 210,000 – 280,000 (FOB Tianjin) |
| Spatial Resolution | < 1 µm |
| Spectral Resolution | ≤ 1 cm⁻¹ |
| Spectral & Lifetime Wavelength Range | 250 – 1650 nm |
| Fluorescence Lifetime Range | 100 ps – 10 ms |
| Maximum Coupled Raman Excitation Lasers | 4 wavelengths |
| Maximum FLIM Excitation Lasers | 4 wavelengths |
| Shortest Excitation Wavelength | 266 nm |
| Detector Types | High-Sensitivity PMT + Cooled CCD |
| Scanning Axes | XYZ motorized stage |
| Optical Zoom | 0.3× – 1.5× |
| Microscope Configuration | Upright or Inverted |
| Illumination Source | Tungsten-Halogen Lamp |
| Image Workstation | Integrated Windows-based platform with real-time acquisition & analysis suite |
| Vibration Isolation Table | 1500 × 1800 mm dedicated optical-grade active/passive hybrid isolation platform |
| Temperature Range (with optional cryo/hot stages) | 4 K – 550 K |
| Pressure Range (with optional DAC modules) | Up to 100 GPa (DAC) / up to 100 MPa (hydrostatic cell) |
| Brand | Orient KOJI |
|---|---|
| Origin | Tianjin, China |
| Model | SMP-1218C |
| Surface Material | High-permeability Stainless Steel |
| Top Plate Thickness | 6 mm |
| Surface Roughness | ≤0.8 µm |
| Flatness | ≤0.05 mm/m² |
| Mounting Hole Pattern | M6 Threaded Holes (Standard Pitch: 25 mm |
| Optional | 50 mm or 100 mm) |
| Hole Type | Countersunk Through-Holes |
| Core Structure | Carbon Steel Honeycomb Sandwich |
| Base Frame | Medium-Carbon Steel with Vibration-Damping Design |
| Vertical Natural Frequency | 2.5–8 Hz |
| Peak-to-Peak Vibration Amplitude | 1–3 µm |
| Surface Finish | Matte Black Electrostatic Powder Coating |
| Customization | Available for hole spacing, large through-holes, color, and dimensional specifications |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AQ3010 |
| Product Type | Portable |
| Measurement Range | 0.01–19.99 NTU, 20.0–99.9 NTU, 100–1000 NTU |
| Resolution | 0.01 NTU (0.01–19.99), 0.1 NTU (20.0–99.9), 1 NTU (100–1000) |
| Operating Temperature | 0–50 °C (RH 0–90% at 30 °C) |
| Accuracy | ±2% of reading (0–500 NTU) |
| Light Source | Infrared LED compliant with ISO 7027 |
| Power Supply | 4×AAA alkaline batteries (≥3000 measurements) or 4×AAA lithium batteries (≥12,000 measurements) |
| IP Rating | IP67 |
| Auto-ranging | Yes (0–1000 NTU) |
| Calibration Standards | EPA-compliant polymer standards at 0.2, 20, 100, and 800 NTU |
| Sample Cell | 25 mm diameter vials |
| Auto-power-off | After 20 minutes idle |
| Battery Self-test | With diagnostic fault codes |
| Brand | Orion |
|---|---|
| Origin | USA |
| Model | AQ3010 |
| Product Type | Portable |
| Measurement Range | 0.01–1000 NTU |
| Resolution | 0.01 NTU (0.01–19.99 NTU), 0.1 NTU (20.0–99.9 NTU), 1 NTU (100–1000 NTU) |
| Accuracy | ±2% of reading (0–500 NTU), ±3% of reading (501–1000 NTU), ±1 digit |
| Operating Temperature | 0–50 °C |
| Response Time | <6 s |
| Sample Volume | 10 mL |
| Calibration Standards | 0.02, 20.0, 100, and 800 NTU |
| Light Source | ISO 7027-compliant infrared LED |
| Sample Cell | 25 mm diameter vial with alphanumeric ID |
| Power Supply | 4 × AAA alkaline batteries (≥3000 measurements) or 4 × AAA lithium batteries (≥12,000 measurements) |
| Auto-power-off | After 20 min idle |
| Ingress Protection | IP67 |
| Certifications | CE, TÜV, CSA-US (3-in-1), FCC Part 15 |
| Self-diagnostic Function | Yes, with error code display |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AQ4500 |
| Price | Upon Request |
| Instrument Type | Portable |
| Measurement Ranges | EPA 180.1: 0–4000 NTU |
| GLI Method 2 | 0–40 NTU |
| ISO 7027 | 0–150 FNU |
| EBC | 0–24.5 EBC |
| ISO ABSB | 40–4000 FAU |
| IR-Ratio Mode | 0–4000 NTU |
| ASBC | 0–236 ASBC |
| Resolution | 0.001 NTU / 0.01 NTU / 0.1 NTU (auto-ranging) |
| Operating Temperature | −40.0 to +60.0 °C (non-condensing) |
| Accuracy | ±1% of reading |
| Light Source | Dual-wavelength LED (white + infrared) |
| Battery Life | 2500 h (alkaline) / 100,000 h (lithium) |
| Data Storage | 100 measurements |
| Interface | RS232 with 25-pin to 9-pin adapter |
| Calibration Standards | 0, 1, 10, 100, and 1000 NTU |
| Sample Cell | 24 mm diameter cuvette |
| Display | Custom LCD with dual-function touch keys |
| Environmental Compliance | Meets EPA 180.1, ISO 7027, ASBC Beer Methods, EBC Brewing Standards, and ISO 7027 (ABSB) |
| Brand | CNOPTEC (Otoscope) |
|---|---|
| Origin | Chongqing, China |
| Model | MDS400 |
| Type | Inverted |
| Total Magnification | 50×–1000× |
| Eyepieces | Wide-field, high-eyepoint plan eyepieces, 10×, field number Φ22 mm |
| Objectives | LMPlan FL 5× (NA 0.15, WD 21.0 mm), 10× (NA 0.30, WD 20.0 mm), 20× (NA 0.40, WD 15.0 mm), 50× (NA 0.55, WD 10.0 mm), LPL 50× (NA 0.75, WD 3.0 mm), LPL 80× (NA 0.80, WD 0.85 mm), LMPlan FL 100× (dry, NA 0.85, WD 3.0 mm) |
| Observation Modes | Brightfield, Darkfield, Polarized Light |
| Optical System | OTICS infinity-corrected achromatic optical path |
| Trinocular Head | Dual-beam split (100% viewing / 20% viewing + 80% imaging), 45° inclination, interpupillary adjustment 48–76 mm |
| Nosepiece | Five-position objective turret |
| Focus Mechanism | Coaxial coarse/fine focus |
| Stage | Triple-layer mechanical stage, 210 × 180 mm surface, 50 × 50 mm travel range, vernier scale 0.1 mm |
| Illumination | 12 V/50 W halogen or 5 W LED (100–240 V AC input) |
| Polarization Accessories | Rotatable polarizer and analyzer |
| Camera Interface | C-mount with 1×/0.75×/0.5× reduction options |
| Image Analysis Software | OPTPro Professional Metallographic Analysis & Rating Software |
| Digital Imaging Compatibility | Canon, Nikon DSLR systems |
| Brand | Otsuka Electronics |
|---|---|
| Origin | Japan |
| Model | RETS-100nx |
| Measurement Range (Retardation) | 0–60,000 nm |
| Wavelength Range | 400–800 nm (optional extensions available) |
| Retardation Repeatability (n=30) | ≤0.08 nm (quartz waveplate, ~600 nm) |
| Cell Gap Range | 0–600 µm (An=0.1) |
| Cell Gap Repeatability (n=30) | ≤0.005 µm (at ~3 µm gap, An=0.1) |
| Axis Detection Repeatability (n=30) | ≤0.08° |
| Spot Diameter | φ2 mm (standard) |
| Light Source | 100 W halogen lamp |
| Detector | Proprietary high-speed multichannel spectrometer (≈500 wavelength channels) |
| Standard Stage | 100×100 mm fixed platform |
| Optional Accessories | Motorized XY stage, tilt-rotary stage for Rth and 3D birefringence analysis, axis-angle compensation module |
| Brand | OWIS |
|---|---|
| Origin | Germany |
| Model Series | KTM40, LTM45, and compatible precision motorized translation stages |
| Drive Options | Stepper Motor or DC Servo Motor |
| Travel Range | 5.5–130 mm (model-dependent) |
| Load Capacity | 7–200 N (model-dependent) |
| Max. Velocity | 0.2–40 mm/s |
| Repeatability | <2–<20 µm |
| Positioning Accuracy | <15–<30 µm per 100 mm |
| Vertical Deviation | <2–<5 µm |
| Horizontal Deviation | <2–<10 µm |
| Angular Resolution (Rotary) | Min. 0.02° |
| Max. Rotation Speed | 3600°/s |
| Filter Wheel Compatibility | Up to 8 positions, 24 V DC operation |
| Compliance | Designed for integration into ISO/IEC 17025-compliant optical alignment systems and GLP/GMP-adjacent research environments |
| Brand | OWIS |
|---|---|
| Origin | Germany |
| Model | LIMES122 |
| Type | Motorized Linear Translation Stage |
| Drive Options | Stepper Motor / DC Servo Motor |
| Travel Options | 50 / 80 / 155 / 195 / 260 mm |
| Max. Speed | 25 mm/s |
| Max. Load Capacity | 150 N |
| Max. Driving Force | 60 N |
| Lead Screw Pitch | 1 mm |
| Bidirectional Repeatability | < 2 µm |
| Positional Accuracy | < 16 µm per 100 mm |
| Tilt Error (Pitch & Yaw) | < 75 µrad |
| Vertical & Horizontal Straightness Deviation | < 2 µm |
| Max. Motor Voltage | 40 V (stepper) / 24 V (servo) |
| Holding Voltage | 3.2 V |
| Max. Motor Current | 1.8 A (stepper) / 3.3 A (servo) |
| Steps per Revolution | 200 (stepper) / 2000 (servo) |
| Optional Encoders | Incremental Optical Encoder (±3 µm/m accuracy, 0.1 µm resolution) |
| Optional Brake | Electromagnetic Holding Brake |
| Brand | OWIS |
|---|---|
| Origin | Germany |
| Model | LIMES124 |
| Type | Motorized Linear Translation Stage |
| Travel Options | 80 / 130 / 230 / 290 mm |
| Drive Options | Stepper Motor (200 steps/rev) or DC Servo Motor (2000 steps/rev) |
| Max Speed | 25 mm/s |
| Max Load Capacity | 150 N |
| Max Driving Force | 60 N |
| Lead Screw Pitch | 1 mm |
| Bidirectional Repeatability | < 2 µm |
| Positional Accuracy | < 16 µm per 100 mm |
| Angular Errors (Pitch & Yaw) | < 75 µrad |
| Vertical & Horizontal Deviation | < 2 µm |
| Motor Supply Voltage (Max) | 40 V (stepper), 24 V (servo) |
| Holding Voltage | 3.2 V |
| Max Motor Current | 1.8 A (stepper), 3.3 A (servo) |
| Vacuum Compatibility | Up to 10⁻⁶ mbar |
| Housing | Anodized black electroplated aluminum with metal protective cover for lead screw assembly |
| Optional | Electromagnetic brake |
| Brand | OWIS |
|---|---|
| Origin | Germany |
| Model | LIMES150 |
| Type | Motorized Linear Translation Stage |
| Drive Options | Stepper Motor / DC Servo Motor |
| Travel | 100 / 200 / 300 mm |
| Max. Speed | 40 mm/s (stepper), 80 mm/s (servo) |
| Max. Load Capacity | 600 N |
| Max. Driving Force | 170 N (stepper), 60 N (servo) |
| Lead | 2 mm |
| Bidirectional Repeatability | < 2 µm |
| Positional Accuracy | < 10 µm per 100 mm |
| Tip/Tilt Error | < 60 µrad (tip), < 80 µrad (tilt) |
| Vertical & Horizontal Deviation | < 3 µm per 100 mm |
| Max. Motor Voltage | 40 V (stepper), 23 V (servo) |
| Holding Voltage | 4.88 V |
| Max. Motor Current | 1.4 A (stepper), 2.44 A (servo) |
| Steps per Revolution | 200 (stepper), 5000 (servo) |
| Optional Encoders | Incremental optical encoder (±3 µm/m accuracy, 0.1 µm resolution) |
| Housing Material | Anodized black aluminum alloy with precision ground spherical screw and preloaded ball bearings |
| Brand | OWIS |
|---|---|
| Origin | Germany |
| Model | LIMES170 |
| Type | Motorized Linear Translation Stage |
| Travel Options | 400 mm / 600 mm / 1000 mm / 1500 mm |
| Drive Options | Stepper Motor or DC Servo Motor |
| Max Speed | 80 mm/s (stepper) / 150 mm/s (servo) |
| Max Load Capacity | 1500 N |
| Max Thrust Force | 400 N (stepper) / 150 N (servo) |
| Lead Screw Pitch | 5 mm |
| Bidirectional Repeatability | < 3 µm |
| Positioning Error | < 10 µm per 100 mm |
| Tilt & Pitch Errors | < 75 µrad (stepper), < 150 µrad (servo) |
| Vertical & Horizontal Deviation | < 2 µm per 100 mm |
| Motor Voltage | up to 40 V (stepper), up to 50 V (servo) |
| Max Current | 1.4 A – 4.9 A (depending on drive type) |
| Steps per Revolution | 200 (stepper), 10,000 (servo) |
| Optional Encoders | Incremental linear encoder (±3 µm/m accuracy, 0.1 µm resolution) |
| Housing Material | Anodized black electroplated aluminum alloy |
| Bearing System | Preloaded spherical bearing assembly |
| Guiding Mechanism | Precision recirculating ball guide rail with zero backlash |
| Brand | OWIS |
|---|---|
| Origin | Germany |
| Model | LIMES60 |
| Drive Options | Stepper Motor / DC Servo Motor |
| Travel Options | 20 / 40 / 50 / 70 / 105 mm |
| Max. Speed | 30 mm/s |
| Max. Load Capacity | 100 N |
| Max. Driving Force | 50 N (stepper), 30 N (servo) |
| Lead Screw Pitch | 1 mm |
| Bidirectional Repeatability | < 2 µm |
| Positional Error | < 16 µm per 100 mm |
| Tilt Error (Pitch/Yaw) | < 150 µrad / < 100 µrad |
| Vertical & Horizontal Deviation | < 4 µm each |
| Max. Motor Voltage | 40 V (stepper), 24 V (servo) |
| Holding Voltage | 2.0 V |
| Max. Motor Current | 1.8 A (stepper), 1.9 A (servo) |
| Steps per Revolution | 200 (stepper), 2000 (servo) |
| Optional Encoders | Incremental Linear Encoder (±3 µm/m accuracy, 0.1 µm resolution) |
| Optional Brake | Electromagnetic Holding Brake |
| Brand | OWIS |
|---|---|
| Origin | Germany |
| Model | LIMES80 |
| Product Type | Motorized Translation Stage |
| Drive Options | Stepper Motor / DC Servo Motor |
| Travel Options | 50 / 70 / 105 / 135 / 210 mm |
| Max. Speed | 25 mm/s |
| Max. Load Capacity | 150 N |
| Max. Driving Force | 60 N |
| Lead Screw Pitch | 1 mm |
| Bidirectional Repeatability | < 2 µm |
| Positioning Error | < 16 µm per 100 mm |
| Tip/Tilt Errors | < 100 µrad (yaw), < 150 µrad (pitch) |
| Vertical & Horizontal Abbe Errors | < 4 µm |
| Motor Supply Voltage (Max.) | 40 V (stepper), 24 V (servo) |
| Holding Voltage | 3.2 V |
| Max. Motor Current | 1.8 A (stepper), 3.3 A (servo) |
| Steps per Revolution | 200 (stepper), 2000 (servo) |
| Optional Encoders | Incremental optical grating scale (±3 µm/m accuracy, 0.1 µm resolution) |
| Optional Brake | Electromagnetic holding brake |
| Brand | OWIS |
|---|---|
| Origin | Germany |
| Model | LTM |
| Type | Motorized Translation Stage |
| Travel Range | 25–395 mm |
| Construction | Anodized Hard Aluminum (Black, Low Reflectivity) |
| Guideway | Stainless Steel Linear Rail |
| Drive Options | DC Servo or Stepper Motor |
| Limit Switches | Hall Effect, Mechanical or Inductive |
| Fine Adjustment | Precision Micrometer Screw (Zero-Backlash) |
| Compliance | Industrial-Grade Mechanical Design |