Optical Laboratory Equipment
Filter
Showing 1261–1290 of 1780 results
| Brand | PerfectLight (PoPhilai) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-FX300HU |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Output Beam Shape | Rectangular |
| Adjustable Beam Area | 10×10 to 50×50 mm² |
| Spectral Range | 320–800 nm |
| Total Optical Power | 50 W |
| Irradiance Uniformity (≤20×20 mm²) | < ±4% (meets ASTM E927 Class A solar simulator requirement) |
| Long-Term Stability (8 h) | < 2% |
| Spatial Non-Uniformity | ±1% |
| Max. Irradiance | ≥3000 mW/cm² (at 10×10 mm², direct output with focusing tube) |
| Intensity Control | Precision current regulation + motorized iris diaphragm |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Safety Features | Fan-failure interlock, post-shutdown fan delay, over-current/over-load auto-shutdown |
| Power Management | Embedded micro-CPU digital control system |
| Filter Compatibility | UV-, visible-, and narrowband bandpass filters |
| Brand | PerfectLight (PufeiLai) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-ILS |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Lamp Power Options | 250 W / 350 W |
| Current Display | Digital |
| Operating Mode | Programmable Control |
| Current Adjustment Range | 9–16 A |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Total Optical Power Output | 50 W |
| Irradiance | ≥2000 mW/cm² |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Divergence Angle | <10° |
| Minimum Spot Diameter | ≥50 mm (distance-dependent) |
| Long-Term Intensity Stability | ≤±3% |
| Protection Features | Fan-failure interlock, auto-start on power-up, post-shutdown cooling delay, over-current and overload cut-off |
| Thermal Management | Proprietary passive + active heat dissipation architecture |
| Optional Accessories | Fiber-optic coupling kits, beam homogenizers, liquid filters, light guide tubes, motorized height-adjustable stages, mechanical shutters, five-point irradiance mapping kit |
| Optional Filter Modules | Bandpass filters, long-pass/short-pass edge filters, AM1.5G spectral correction filters, neutral density attenuators |
| Optional Safety Solutions | UV/visible protective eyewear, light-tight enclosure |
| Optional Measurement Tools | Calibrated optical power meter, fiber-coupled spectrometer |
| Brand | PerfectLight (PoPhilai) |
|---|---|
| Origin | Beijing, China |
| Model | LD Light Source |
| Light Source Type | Monochromatic Diode Laser |
| Illumination Mode | External Irradiation |
| Output Power | >100 mW (wavelength-dependent) |
| Spectral Bandwidth (FWHM) | <2.5 nm |
| Beam Divergence | ≤60° (with fiber + collimating lens), ≤1.2 mrad (collimated beam) |
| Collimated Beam Aperture | 40 mm |
| Available Wavelengths | 405 nm, 447 nm, 473 nm, 532 nm, 635 nm, 671 nm |
| Output Options | Free-space direct output or fiber-coupled (optional kit) |
| Warm-up Time | <8 min |
| Modulation Support | TTL and Analog, up to 20 kHz |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | PLS-LD Laser |
| Light Source Type | Monochromatic Diode Laser |
| Irradiation Mode | External Illumination |
| Output Power | >100 mW (wavelength-dependent) |
| Spectral Bandwidth (FWHM) | <2.5 nm |
| Beam Divergence | ≤60° (with fiber + collimating lens) / ≤1.2 mrad (collimated beam) |
| Collimated Beam Diameter (Entrance Pupil) | 40 mm |
| Available Wavelengths | 405 nm, 447 nm, 473 nm, 532 nm, 635 nm, 671 nm |
| Output Options | Free-space direct output or fiber-coupled (with optional coupling kit) |
| Warm-up Time | <8 min |
| Modulation Support | TTL and Analog, up to 20 kHz |
| Cooling & Stability | Integrated precision thermoelectric cooling and constant-current driver for wavelength and power stability |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLS-LD |
| Light Source Type | Diode Laser |
| Irradiation Mode | Internal Illumination |
| Output Power | >100 mW (wavelength-dependent) |
| Spectral Bandwidth (FWHM) | <2.5 nm |
| Beam Divergence | ≤60° (with fiber + collimating lens), ≤1.2 mrad (collimated beam) |
| Collimated Beam Diameter (Entrance Pupil) | 40 mm |
| Available Wavelengths | 405 nm, 447 nm, 473 nm, 532 nm, 635 nm, 671 nm |
| Output Options | Free-space direct output or fiber-coupled (with optional coupling kit) |
| Warm-up Time | <8 min |
| Modulation Support | TTL and analog input, max frequency <20 kHz |
| Brand | PerfectLight (PoFeiLai) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-LED 100C |
| Light Source Type | High-Intensity Monochromatic/Polychromatic LED Array |
| Illumination Mode | External Irradiation |
| Spectral Output | Narrowband (FWHM 15–20 nm), Center Wavelength Tolerance ±10 nm |
| Output Aperture | Φ38 mm (expandable via collimating or diffusing extension tubes) |
| Beam Options | Collimated (Φ50–60 mm, adjustable divergence) or Diffused (divergence angle adjustable by working distance) |
| Wavelength Selection | 365–940 nm (discrete monochromatic), Warm/Natural/Neutral/Cool White (3000–>7000 K), Custom Multi-Channel Arrays (e.g., 6–7 channel, plant-specific R:B ratios 1:9 to 9:1, pink broadband 380–840 nm) |
| LED Lifetime | >10,000 h |
| Intensity Stability | ≤±1% short-term fluctuation |
| Control Architecture | Embedded micro-CPU with digital constant-current regulation |
| Safety Features | Fan-failure auto-shutdown, over-current/over-load protection, 360° rotatable lamp housing, height-adjustable precision support stand |
| Optional Accessory | PLS-LED ZM articulating beam director |
| Brand | PerfectLight (PoPhilae) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-LED 100C |
| Light Source Type | High-Intensity Monochromatic/Polychromatic LED Array |
| Illumination Mode | External Irradiation |
| Spectral Output | Narrowband (FWHM 15–20 nm), Center Wavelength Tolerance ±10 nm |
| Output Aperture | Φ38 mm (expandable via collimating or diffusing extension tubes) |
| Adjustable Collimated Spot Size | Φ50–60 mm (near-collimated, focus-tunable) |
| Wavelength Options | 365–940 nm (discrete monochromatic), Warm/Natural/Cool White (3000–>7000 K), Custom Multi-Spectral Arrays (e.g., 660 nm:460 nm = 9:1 to 1:9, Pink Broadband 380–840 nm, Hexa-/Hepta-LED) |
| LED Lifetime | >10,000 h |
| Output Stability | ≤±1% short-term fluctuation (measured over 1 h, ambient temp 25°C) |
| Control Interface | Digital microcontroller-based power management with continuous/pulsed/stepwise irradiation modes |
| Safety Features | Fan-failure auto-shutdown, over-current/over-load protection, 360° rotatable lamp housing, height-adjustable precision optical mount |
| Optional Accessory | PLS-LED ZM articulated beam steering head |
| Brand | PerfectLight (PofeiLai) |
|---|---|
| Model | PLS-LED-LC1000 |
| Light Source Type | High-Power Monochromatic LED Array |
| Cooling Method | Active Liquid Cooling |
| Irradiance | Up to 2.0 W/cm² at Sample Plane |
| Spectral Range | Standard Options: 365 nm, 385 nm, 395 nm, 405 nm |
| Power Supply | 220 V AC, 50 Hz |
| Total System Power | 610 W (Host) / 1000 W (LED Module) |
| Operating Temperature | 0–40 °C (non-condensing) |
| Storage Temperature | −10–60 °C, 30–85% RH (non-condensing) |
| Illumination Mode | External (Top/Oblique/Normal Incidence) |
| Uniformity | ≥90% over 100 mm × 100 mm active area |
| Safety | Ozone-Free Operation |
| Compliance | CE-marked design principles |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SME300E H1 |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Lamp Power | 300 W |
| Total Optical Output | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Diameter | 30–60 mm |
| Maximum Irradiance | >4200 mW/cm² |
| Long-Term Stability | ≤±3% |
| Power Supply Stability | ±0.3% (instantaneous) |
| Current Limit Adjustment | up to 25 A |
| Lamp Lifetime | >1000 h |
| Triggering | Integrated High-Voltage Ignition (two-stage, no high-voltage cabling) |
| Control Modes | Constant Current / Constant Irradiance |
| Feedback System | Precision Optical Photometric Feedback |
| Cooling Architecture | Redesigned Forced-Air Thermal Management |
| Interface | RS232/Ethernet-enabled Host PC Software Control |
| Safety Features | Fan-fault shutdown, auto-startup, delayed shutdown, over-current/over-load protection |
| Compliance | Designed for GLP-compliant photoreactor integration and ISO/IEC 17025-aligned optical calibration workflows |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLS-STAS-I |
| Light Source Type | Direct Natural Sunlight (Outdoor Concentrated Illumination) |
| Illumination Mode | Internal Irradiation Configuration |
| Tracking Method | Hybrid Optical + Astronomical Time-Based Tracking |
| Elevation Range | 0–90° |
| Azimuth Range | −110° to +110° (0° = True South) |
| Tracking Accuracy | <0.3° (Optical), <1° (Time-Based) |
| Fresnel Lens Area | 0.2 m² |
| Minimum Focal Spot Area | 7 cm² |
| Concentration Ratio | 278× |
| Operating Temperature | 5–60°C |
| Ambient Temperature Range | −25°C to +55°C |
| Pressure Condition | Ambient Atmospheric |
| Gas Collection | 300 mL / 500 mL Gas Sampling Bags |
| Photosynthetic/Photochemical Irradiance Measurement | ≤10 W/cm² |
| Radiation Monitoring | Direct & Global Solar Irradiance |
| Environmental Sensors | Ambient Temperature, Relative Humidity, Barometric Pressure, Wind Speed |
| IP Rating | IP67 |
| Wind Resistance | Up to Beaufort Scale 6 |
| Control Architecture | Integrated PLC with GPS Geolocation and Real-Time Parameter Logging |
| Safety Features | End-Position Limit Switches, Wind-Activated Auto-Stow, Rain Detection & Shutdown |
| Brand | PerfectLight (PerkinElmer-compatible architecture) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300/300UV |
| Light Source Type | DC-powered short-arc xenon lamp |
| Illumination Mode | External irradiation configuration |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm with optional optics) |
| Beam Divergence | ~6° (FWHM) |
| Spot Diameter | 30–60 mm (adjustable via working distance) |
| Long-term Irradiance Stability | ≤ ±3% over 8 h |
| Lamp Power Rating | 300 W (adjustable 150–300 W) |
| Lamp Lifetime | >1000 h (under photoreactor-relevant irradiance conditions) |
| Current Limit | 21 A |
| Ignition Method | Integrated dual-stage high-voltage trigger (no HV cabling between power supply and lamp housing) |
| Thermal Management | Passive aluminum finned heat sink |
| EMI Shielding | Fully enclosed grounded metal lamp housing |
| Control Interface | Microprocessor-based digital power management with programmable operation mode |
| Safety Compliance | No high-voltage transmission in interconnect cable |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Light Source Type | Xenon Arc Lamp |
| Output Power Range | 150–300 W |
| Rated Lamp Power | 300 W |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Divergence | ~6° (full angle) |
| Spot Diameter | 30–60 mm (at working distance) |
| Long-Term Irradiance Stability | ≤ ±3% |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Trigger Method | Integrated High-Voltage Ignition (dual-stage, no high-voltage cabling) |
| Max Current Limit | 21 A |
| Cooling | Passive heatsink-based thermal management |
| Illumination Mode | External (top-down or side-illumination compatible) |
| Safety Design | Low-voltage lamp-to-power-supply interconnect, EMI-shielded metal housing |
| Control Interface | Microprocessor-based digital power management with programmable mode |
| Brand | PerfectLight (Perfetlight) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300+300UV |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Total Optical Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Divergence | ~6° (average) |
| Spot Diameter | 30–60 mm (distance-dependent) |
| Long-Term Irradiance Stability | ≤ ±3% |
| Lamp Power | 300 W |
| Power Adjustment Range | 150–300 W |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Max Current Limit | 21 A |
| Triggering Method | Integrated High-Voltage Ignition (dual-stage, no high-voltage cabling) |
| Lamp Housing | Shielded Metal Enclosure |
| Power Management | Microcontroller-Based Digital Control |
| Safety | Low-Voltage Interconnect Between Lamp Housing and Power Supply |
| Brand | PerfectLight (PoPhilae) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300D / PLS-SXE300DUV |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Total Optical Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Divergence | Avg. 6° |
| Spot Diameter | Adjustable at 30–60 mm working distance |
| Long-Term Irradiance Stability | ≤ ±3% |
| Lamp Power | 300 W |
| Power Adjustment Range | 150–300 W |
| Power Supply Ripple | 200 mVp-p |
| Lamp Lifetime | >1000 h |
| Max Current Limit | 21 A |
| Trigger Method | Integrated High-Voltage Ignition (Two-Stage, No HV Transmission) |
| Cooling | Axial Fan-Based Heat Dissipation (Patented Structure, CN201320740323.5) |
| Optional Accessory | PLS-LA320A Homogenizer |
| Brand | PerfectLight (Perfetlight) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300E |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Lamp Power | 300 W |
| Power Adjustment Range | 150–300 W |
| Power Supply Ripple | 150 mVp-p |
| Load Regulation | ±0.5% |
| Current Display | Digital |
| Control Mode | Programmable / PC Software Interface |
| Current Limit Setting | 21 A |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Triggering Method | Integrated High-Voltage Ignition (two-stage, no high-voltage cabling) |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 320–2500 nm) |
| Beam Divergence | Avg. 6° |
| Spot Diameter | 30–60 mm (distance-dependent) |
| Long-Term Stability | ≤±3% |
| Cooling Architecture | Axial Fan-Based Heat Dissipation (Patent CN201320740323.5) |
| Safety Features | No HV transmission between lamp housing and power supply, fan-fault protection, auto-start on power-up, shutdown delay, overcurrent/overload cutoff |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300E / PLS-SXE300EUV |
| Lamp Type | 300 W Short-Arc Xenon Lamp |
| Illumination Mode | External Irradiation |
| Power Adjustment Range | 150–300 W |
| Power Supply Ripple | 150 mVp-p |
| Load Regulation | ±0.5% |
| Current Limit Setting | 21 A |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 320–2500 nm with optional optics) |
| Beam Divergence | ~6° (full angle, average) |
| Spot Diameter | 30–60 mm (distance-dependent) |
| Long-Term Intensity Stability | ≤±3% (over 8 h) |
| Triggering Method | Integrated High-Voltage Ignition (dual-stage, no high-voltage cabling between lamp and power supply) |
| Cooling Architecture | Axial Air-Cooling System (Patent No. CN201320740323.5) |
| Control Interface | RS232/USB for PC-based software control |
| Safety Features | Fan-failure shutdown, auto-startup, post-shutdown cooling delay, over-current & over-load protection |
| Housing Material | Non-metallic lamp housing |
| Brand | AOE Tech |
|---|---|
| Model | PMIWDM |
| Category | Polarization-Maintaining Optical Component |
| Type | Integrated Passive Fiber-Optic Device |
| Construction | Monolithic Hybrid Assembly |
| Operating Principle | Polarization-Selective Non-Reciprocal Isolation + Wavelength-Dependent Directional Coupling |
| [Key | Value] |
| Brand | AOE Tech |
| Origin | Shanghai, China |
| Model | PMIWDM |
| Component Type | Polarization-Maintaining Hybrid Optical Device |
| Signal Wavelength Range | 1530–1565 nm |
| Pump Wavelength Options | 960–990 nm (for 980 nm band) or 1460–1490 nm (for 1480 nm band) |
| Typical Peak Isolation | 40 dB (single-stage), 55 dB (dual-stage) |
| Isolation at 23 °C (Signal Path) | ≥30 dB (single-stage), ≥48 dB (dual-stage) |
| Insertion Loss (Signal Path, 23 °C) | ≤0.9 dB (single-stage, 1550/980), ≤1.2 dB (double-stage, 1550/1480) |
| Insertion Loss (Reflection Band) | ≤0.6 dB |
| Extinction Ratio | ≥22 dB (F-type, fast-axis blocked), ≥20 dB (B-type, both axes active) |
| Directivity | ≥55 dB |
| Return Loss | ≥50 dB |
| Thermal Stability of IL | ≤0.005 dB/°C |
| Max Optical Power Handling | 300 mW (CW) |
| Operating Temperature | −5 to +70 °C |
| Storage Temperature | −40 to +85 °C |
| Package Dimensions | Ø5.5 × L35 mm |
| Input/Output Fiber Options | PM1550 (transmit path), PM1550 / PM980 / HI1060 / SMF-28 (reflect path) |
| Alignment | Slow-axis aligned to connector key |
| Connector Options | FC/APC, FC/UPC, SC/APC, SC/UPC, LC/UPC, or bare fiber (250 µm or 900 µm) |
| Brand | Prior |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | H100A |
| Pricing | Contact for Quotation |
| Travel Range | 75 mm × 50 mm |
| Unidirectional Repeatability | < 0.7 µm |
| Bidirectional Repeatability | < 1.9 µm |
| Metric Accuracy | < 0.09 µm/mm |
| Full-Travel Accuracy | < 7.2 µm |
| Resolution | 0.02 µm |
| Perpendicularity | < 35 arcsec |
| Maximum Speed | 30 mm/s |
| Maximum Load Capacity | 5 kg |
| Encoder | None |
| Motor Type | 200-step Stepper Motor |
| Lead Screw Pitch | 1 mm |
| Weight | 2.5 kg |
| Brand | Prior |
|---|---|
| Origin | United Kingdom |
| Model | OpenStand® |
| Type | Motorized Electrophysiology-Compatible Optical Platform |
| Z-Axis Travel | 100 mm |
| Throat Depth | 200 mm |
| Condenser Adjustment Range | 35 mm |
| Brand | Prior |
|---|---|
| Origin | United Kingdom |
| Model | ProScan |
| Platform Type | Motorized Microscope Stage & Z-Axis Control System |
| Z-Drive Options | Piezo Nanopositioner (NZ200FCE) + High-Range Focus Motor (PS3H122R) |
| XY Stage Options | H101F High-Precision Linear Stage |
| Illumination Integration | Lumen 200 Fluorescence Light Source + Brightfield LED |
| Control Software | ProScan III® and OptiScan III® |
| Compatibility | Upright Microscopes (e.g., Nikon, Olympus, Leica, Zeiss) |
| Stage Mounting | ES111 Universal Adapter Platform |
| Compliance | CE Marked, RoHS Compliant |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Lamp Type | Xenon Arc Lamp |
| Rated Power | 1800 W |
| Cooling Method | Air-Cooled |
| Rated Lifetime | 1500 hours |
| Compatible Models | Q-SUN Xe-1, Q-SUN Xe-3 |
| Spectral Range | Full-spectrum (290–800 nm), UV-Visible-NIR |
| Mounting Configuration | External Irradiation Source |
| Filter Dependency | Requires Borosilicate Outer Sleeve + Multi-element Inner Filter Assembly (7-piece per set) |
| Compliance | ASTM G155, ISO 11341, ISO 4892-2, AATCC TM16, SAE J2527 |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Reference Photovoltaic Device |
| Model | QE-B1 |
| Calibration Traceability | NIST |
| Compliance | IEC 60904-2, WPVS Class A |
| Filter Options | Optional AM1.5G, AM0, or custom spectral filters |
| Output Type | Short-circuit current (Isc) calibrated under standard test conditions (STC) |
| Brand | Qioptiq |
|---|---|
| Origin | UK |
| Model | iFLEX-IRIS-405 |
| Wavelength | 405 nm |
| Output Power | 25 mW |
| Beam Mode | TEM₀₀ (M² < 1.1) |
| Beam Diameter (at aperture) | 0.7 mm |
| Beam Divergence | Diffraction-limited |
| Polarization Ratio | >200:1 (Vertical ±2°) |
| Power Stability (8 h) | <0.5% RMS |
| Intensity Noise | <0.05% RMS (20 Hz – 20 MHz) |
| Pointing Stability | <1 µrad/°C |
| Dimensions | 70 mm × 40 mm × 38 mm |
| Delivery | Free-space or single-mode polarization-maintaining fiber-coupled output |
| Illumination Type | External illumination |
| Brand | Qioptiq |
|---|---|
| Origin | United Kingdom |
| Model | iFLEX-IRIS |
| Dimensions | 70 mm × 40 mm × 38 mm |
| Output | Single-wavelength, fiber-coupled (single-mode, polarization-maintaining) |
| Modulation | Closed-Loop Modulation (CLM) with automatic power control |
| Thermal Stability | Active temperature stabilization, mode-hop-free operation |
| Beam Quality | TEM₀₀, high pointing stability |
| Compliance | Designed for integration into CE-compliant OEM instrumentation |
| Fiber Interface | KineFLEX® PM-fiber coupling, free-space/fiber-output dual configuration |
| Brand | Qlibri |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Instrument Component |
| Model | Microcavity Platforms |
| Component Type | Tunable Fabry–Pérot Microcavity System |
| Finesse | F > 10⁵ |
| Quality Factor | Q > 10⁶ |
| Stability | < 10 pm (in closed-cycle cryostats) |
| Mode Volume | V < 2λ³ |
| Spectral Bandwidth | Δλ > 150 nm |
| Operating Temperature Range | < 10 K |
| Magnetic Field Compatibility | up to 150 mT (with optional Helmholtz coils) |
| Spectral Coverage | 350–2000 nm (VIS–NIR, mirror-swappable) |
| Room-Temperature Scan Range | 100 × 100 µm² |
| Cryogenic Scan Range | 10 × 10 µm² |
| Brand | QOptronics |
|---|---|
| Origin | Shanghai, China |
| Model | High Power EYDFA |
| Operating Wavelength | 1535–1565 nm |
| Input Power Range | –5 to +10 dBm |
| Output Power Range | 27–37 dBm |
| Noise Figure (at 0 dBm input) | ≤6 dB |
| Polarization-Dependent Gain | ≤0.5 dB |
| Pump Leakage to Output | ≤–30 dBm |
| Pump Leakage to Input | ≤–30 dBm |
| Return Loss (EDFA off) | ≥40 dB |
| AC Power Supply | 100–240 VAC |
| Power Consumption | 8–50 W |
| Operating Temperature | –5 to +55 °C |
| Storage Temperature | –20 to +70 °C |
| User Interface | LCD display with LED status/alarm indicators |
| Network Interface | RJ-45, RS-232, or RS-485 |
| Dimensions | 90×70×19 mm (module), 483×385×44 mm (1U 19″ rack), or 320×220×90 mm (benchtop) |
| Control Modes | ACC, APC, AGC |
| Output Power Options | 10, 13, 20, 27 dBm (customizable) |
| Pigtail Fiber Options | 250 µm, 900 µm, 2 mm, 3 mm |
| Connector Types | FC/UPC, FC/APC, SC/APC |
| Brand | QOptronics |
|---|---|
| Model | LQ-ASE-L-P-PW-SP(GFF) |
| Central Wavelength | 1565–1610 nm |
| Output Power | 7–15 dBm |
| Spectral Flatness (with GFF) | <3 dB |
| Power Spectral Density | ≥−2 to −20 dBm/nm |
| DOP | ≤5% |
| Spectral Stability | ≤±0.05 dB/5 min |
| Output Power Short-Term Stability | ≤±0.02 dB/15 min |
| Output Power Long-Term Stability | ≤±0.03 dB/8 h |
| Operating Temperature | 0–65 °C (−20–65 °C optional) |
| Power Supply | 110/220 V AC or +5 V / +3.3 V DC |
| Max. Power Consumption | 10 W |
| Dimensions (Module) | 90×70×19 mm |
| Dimensions (Benchtop) | 320×220×90 mm |
| Fiber Pigtail | SMF-28 |
| Connector | FC/UPC or FC/APC |
| Brand | QOptronics |
|---|---|
| Origin | Shanghai, China |
| Model | LQ-SLED-1310-P-PW-SP |
| Central Wavelength | 1310 ± 10 nm |
| −3 dB Spectral Bandwidth | ≥ 45 nm |
| Output Power Options | 1, 5, 10, 20, 30, 35 mW |
| Spectral Ripple | ≤ 0.2 dB |
| Short-Term Power Stability | ≤ ±0.01 dB / 15 min |
| Long-Term Power Stability | ≤ ±0.03 dB / 8 h |
| Operating Temperature | 0–40 °C |
| Storage Temperature | −20–70 °C |
| Power Supply | AC 110/220 V ±10 %, 50 Hz, 20 W |
| Package Options | Benchtop (320 × 220 × 90 mm) or Module (90 × 70 × 19 mm) |
| Fiber Pigtail | SMF-28 single-mode |
| Output Connector | FC/UPC or FC/APC |
| Operating Mode | Continuous Wave (CW) |
| Feedback Protection | Optional (SP=1) |
| Brand | Qphotonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | DFB-1550-50 |
| Light Source Type | Semiconductor Laser Diode |
| Illumination Method | Internal (Fiber-Coupled) |
| Wavelength | 1550 nm ± 0.5 nm |
| Output Power | 45 mW (typ.) |
| Spectral Linewidth | < 1 MHz |
| Package | 14-pin Butterfly with TEC, Thermistor & Monitor Photodiode |
| Fiber Output | Single-Mode or Polarization-Maintaining (PM) Pigtail |
| Operating Mode | CW or Pulsed via Current/Temperature Tuning |
| Brand | Qphotonics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | FBG Series |
| Light Source Type | Semiconductor Laser Diode (FBG-Stabilized) |
| Wavelength Range | 405–1650 nm |
| Output Power Range | 0.5–350 mW |
| Spectral Linewidth | ≤500 kHz (typical), up to 10 MHz (select models) |
| Tuning Range | ±0.05 nm (center wavelength) |
| Package Options | 14-pin DIL or Butterfly |
| Fiber Options | Single-mode or Polarization-Maintaining (PM) |
| Connector | FC/PC or FC/APC |
| Built-in Components | Thermistor, TEC, Monitor Photodiode |
| Rise Time | 0.5 ns |
| Operating Mode | CW or Pulsed |